adafruit-circuitpython-ble-magic-light 0.9.19

Introduction

BLE service for Magic Light BLE RGB bulbs. Available from Amazon here.

Dependencies

This driver depends on:

• Adafruit CircuitPython

Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle.

Installing from PyPI

On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:

pip3 install adafruit-circuitpython-ble-magic-light

To install system-wide (this may be required in some cases):

sudo pip3 install adafruit-circuitpython-ble-magic-light

To install in a virtual environment in your current project:

mkdir project-name && cd project-name
python3 -m venv .venv
source .venv/bin/activate
pip3 install adafruit-circuitpython-ble-magic-light

Usage Example

"""This demo connects to a magic light and has it do a colorwheel."""
import adafruit_ble
import _bleio

from adafruit_ble.advertising.standard import ProvideServicesAdvertisement
from adafruit_ble_magic_light import MagicLightService

# CircuitPython <6 uses its own ConnectionError type. So, is it if available. Otherwise,
# the built in ConnectionError is used.
connection_error = ConnectionError
if hasattr(_bleio, "ConnectionError"):
    connection_error = _bleio.ConnectionError

def find_connection():
    for connection in radio.connections:
        if MagicLightService not in connection:
            continue
        return connection, connection[MagicLightService]
    return None, None

# Start advertising before messing with the display so that we can connect immediately.
radio = adafruit_ble.BLERadio()

active_connection, pixels = find_connection()
current_notification = None
app_icon_file = None
while True:
    if not active_connection:
        print("Scanning for Magic Light")
        for scan in radio.start_scan(ProvideServicesAdvertisement):
            if MagicLightService in scan.services:
                active_connection = radio.connect(scan)
                try:
                    pixels = active_connection[MagicLightService]
                except connection_error:
                    print("disconnected")
                    continue
                break
        radio.stop_scan()

    i = 0
    while active_connection.connected:
        pixels[0] = colorwheel(i % 256)
        i += 1

    active_connection = None

Documentation

API documentation for this library can be found on Read the Docs.

For information on building library documentation, please check out this guide.

Contributing

Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.