adafruit-circuitpython-displayio-ssd1305 1.3.7

Introduction

DisplayIO driver for SSD1305 monochrome displays

For the framebuf based driver see Adafruit CircuitPython SSD1305.

Dependencies

This driver depends on:

• Adafruit CircuitPython Version 5+

Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle.

Installing from PyPI

On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:

pip3 install adafruit-circuitpython-displayio-ssd1305

To install system-wide (this may be required in some cases):

sudo pip3 install adafruit-circuitpython-displayio-ssd1305

To install in a virtual environment in your current project:

mkdir project-name && cd project-name
python3 -m venv .venv
source .venv/bin/activate
pip3 install adafruit-circuitpython-displayio-ssd1305

Usage Example

import board
import displayio
import terminalio
from adafruit_display_text import label
import adafruit_displayio_ssd1305

displayio.release_displays()

# Use for SPI
spi = board.SPI()
oled_cs = board.D5
oled_dc = board.D6
display_bus = displayio.FourWire(spi, command=oled_dc, chip_select=oled_cs,
                                 baudrate=1000000, reset=board.D9)

# Use for I2C
# i2c = board.I2C()
# display_bus = displayio.I2CDisplay(i2c, device_address=0x3c)

WIDTH = 128
HEIGHT = 64     # Change to 32 if needed
BORDER = 8
FONTSCALE = 1

display = adafruit_displayio_ssd1305.SSD1305(display_bus, width=WIDTH, height=HEIGHT)

# Make the display context
splash = displayio.Group()
display.show(splash)

color_bitmap = displayio.Bitmap(display.width, display.height, 1)
color_palette = displayio.Palette(1)
color_palette[0] = 0xFFFFFF # White

bg_sprite = displayio.TileGrid(color_bitmap,
                               pixel_shader=color_palette,
                               x=0, y=0)
splash.append(bg_sprite)

# Draw a smaller inner rectangle
inner_bitmap = displayio.Bitmap(display.width - BORDER * 2, display.height - BORDER * 2, 1)
inner_palette = displayio.Palette(1)
inner_palette[0] = 0x000000 # Black
inner_sprite = displayio.TileGrid(inner_bitmap,
                                  pixel_shader=inner_palette,
                                  x=BORDER, y=BORDER)
splash.append(inner_sprite)

# Draw a label
text = "Hello World!"
text_area = label.Label(terminalio.FONT, text=text, color=0xFFFFFF)
text_width = text_area.bounding_box[2] * FONTSCALE
text_group = displayio.Group(scale=FONTSCALE, x=display.width // 2 - text_width // 2,
                             y=display.height // 2)
text_group.append(text_area) # Subgroup for text scaling
splash.append(text_group)

while True:
    pass

Documentation

API documentation for this library can be found on Read the Docs.

For information on building library documentation, please check out this guide.

Contributing

Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.