adafruit-circuitpython-lsm303 1.2.2

Introduction

Adafruit CircuitPython module for the LSM303 6-DoF with 3-axis accelerometer and magnetometer

Dependencies

This driver depends on:

• Adafruit CircuitPython

• Bus Device

Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle.

Usage Example

import time
import board
import busio

import adafruit_lsm303

i2c = busio.I2C(board.SCL, board.SDA)
sensor = adafruit_lsm303.LSM303(i2c)

while True:
        raw_accel_x, raw_accel_y, raw_accel_z = sensor.raw_acceleration
        accel_x, accel_y, accel_z = sensor.acceleration
        raw_mag_x, raw_mag_y, raw_mag_z = sensor.raw_magnetic
        mag_x, mag_y, mag_z = sensor.magnetic

        print('Acceleration raw: ({0:6d}, {1:6d}, {2:6d}), (m/s^2): ({3:10.3f}, {4:10.3f}, {5:10.3f})'.format(raw_accel_x, raw_accel_y, raw_accel_z, accel_x, accel_y, accel_z))
        print('Magnetometer raw: ({0:6d}, {1:6d}, {2:6d}), (gauss): ({3:10.3f}, {4:10.3f}, {5:10.3f})'.format(raw_mag_x, raw_mag_y, raw_mag_z, mag_x, mag_y, mag_z))
        print('')
        time.sleep(1.0)

Contributing

Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.

Building locally

To build this library locally you’ll need to install the circuitpython-build-tools package.

python3 -m venv .env
source .env/bin/activate
pip install circuitpython-build-tools

Once installed, make sure you are in the virtual environment:

source .env/bin/activate

Then run the build:

circuitpython-build-bundles --filename_prefix adafruit-circuitpython-lsm303 --library_location .

python3 -m venv .env
source .env/bin/activate
pip install Sphinx sphinx-rtd-theme

cd docs
sphinx-build -E -W -b html . _build/html