The big package is a grab-bag of cool code for use in your programs.

These details have not been verified by PyPI

Project links

Source

Project description

# big

Copyright 2022-2024 by Larry Hastings

big is a Python package of small functions and classes that aren't big enough to get a package of their own. It's zillions of useful little bits of Python code I always want to have handy.

For years, I've copied-and-pasted all my little helper functions between projects--we've all done it. But now I've finally taken the time to consolidate all those useful little functions into one big package--no more copy-and-paste, I just install one package and I'm ready to go. And, since it's a public package, you can use 'em too!

Not only that, but I've taken my time and re-thought and retooled a lot of this code. All the difficult-to-use, overspecialized, cheap hacks I've lived with for years have been upgraded with elegant, intuitive APIs and dazzling functionality. big is chock full of the sort of little functions and classes we've all hacked together a million times--only with all the API gotchas fixed, and thoroughly tested with 100% coverage. It's the code you would have written... if only you had the time. It's a real pleasure to use!

big requires Python 3.6 or newer. Its only dependency is python-dateutil, and that's optional.

Think big!

Why use big?

It's true that much of the code in big is short, and one might reasonably have the reaction "that's so short, it's easier to write it from scratch every time I need it than remember where it is and how to call it". I still see value in these short functions in big because:

everything in big is tested,
every interface in big has been thoughtfully considered and designed.

For example, consider StateManager. If you remove the comments and documentation, it's actually pretty short--easily less than a hundred lines. I myself have written state machines from scratch using a similar approach many times. They're easy to write. So why bother using StateManager? Why not roll your own each time?

Because StateManager not only supports all the features you need--consider accessor and dispatch--its API is carefully designed to help prevent bugs and logical errors. In considering the predecessor of StateManager for inclusion in big, I realized that if an "observer" initiated a state transition, it would produce a blurry mess of observer callbacks and entered and exited states, executed in a confusing order. So StateManager in big simply prevents you from executing state transitions in observers.

Using big

To use big, just install the big package (and its dependencies) from PyPI using your favorite Python package manager.

Once big is installed, you can simply import it. However, the top-level big package doesn't contain anything but a version number. Internally big is broken up into submodules, aggregated together loosely by problem domain, and you can selectively import just the functions you want. For example, if you only want to use the text functions, just import the text submodule:

import big.text

If you'd prefer to import everything all at once, simply import the big.all module. This one module imports all the other modules, and imports all their symbols too. So, one convenient way to work with big is this:

import big.all as big

That will make every symbol defined in big accessible from the big object. For example, if you want to use multisplit, you can access it with just big.multisplit.

You can also use big.all with import *:

from big.all import *

but that's up to you.

big is licensed using the MIT license. You're free to use it and even ship it in your own programs, as long as you leave my copyright notice on the source code.

The best of big

Although big is crammed full of fabulous code, a few of its subsystems rise above the rest. If you're curious what big might do for you, here are the five things in big I'm proudest of:

The multi- family of string functions
big.state
Bound inner classes
Enhanced TopologicalSorter
lines and lines modifier functions

And here are five little functions/classes I use all the time:

gently_title
Log
pushd
re_partition
touch

Index

API Reference, By Module

`big.all`

This submodule doesn't define any of its own symbols. Instead, it imports every other submodule in big, and uses import * to import every symbol from every other submodule, too. Every public symbol in big is available in big.all.

`big.boundinnerclass`

Class decorators that implement bound inner classes. See the Bound inner classes deep-dive for more information.

`BoundInnerClass(cls)`

Class decorator for an inner class. When accessing the inner class through an instance of the outer class, "binds" the inner class to the instance. This changes the signature of the inner class's __init__ from

def __init__(self, *args, **kwargs):`

def __init__(self, outer, *args, **kwargs):

where outer is the instance of the outer class.

Compare this to functions:

If you put a function inside a class, and access it through an instance I of that class, the function becomes a method. When you call the method, I is automatically passed in as the first argument.
If you put a class inside a class, and access it through an instance of that class, the class becomes a bound inner class. When you call the bound inner class, I is automatically passed in as the second argument to __init__, after self.

Note that this has an implication for all subclasses. If class B is decorated with BoundInnerClass, and class S is a subclass of B, such that issubclass(S, B), class S must be decorated with either BoundInnerClass or UnboundInnerClass.

`UnboundInnerClass(cls)`

Class decorator for an inner class that prevents binding the inner class to an instance of the outer class.

If class B is decorated with BoundInnerClass, and class S is a subclass of B, such that issubclass(S, B) returns True, class S must be decorated with either BoundInnerClass or UnboundInnerClass.

`big.builtin`

Functions for working with builtins. (Named builtin to avoid a name collision with the builtins module.)

In general, the idea with these functions is a principle I first read about in either Code Complete or Writing Solid Code:

The intent here is, try to design APIs where it's impossible to call them the wrong way. Restrict the inputs to your functions to values you can always handle, and you won't ever have to return an error.

The functions in this sub-module are designed to always work. None of them should ever raise an exception--no matter what nonsense you pass in. (But don't take that as a challenge!)

`get_float(o, default=_sentinel)`

Returns float(o), unless that conversion fails, in which case returns the default value. If you don't pass in an explicit default value, the default value is o.

`get_int(o, default=_sentinel)`

Returns int(o), unless that conversion fails, in which case returns the default value. If you don't pass in an explicit default value, the default value is o.

`get_int_or_float(o, default=_sentinel)`

Converts o into a number, preferring an int to a float.

If o is already an int or float, returns o unchanged. Otherwise, tries int(o). If that conversion succeeds, returns the result. Otherwise, tries float(o). If that conversion succeeds, returns the result. Otherwise returns the default value. If you don't pass in an explicit default value, the default value is o.

`pure_virtual()`

A decorator for class methods. When you have a method in a base class that's "pure virtual"--that must not be called, but must be overridden in child classes--decorate it with @pure_virtual(). Calling that method will throw a NotImplementedError.

Note that the body of any function decorated with @pure_virtual() is ignored. By convention the body of these methods should contain only a single ellipsis, literally like this:

class BaseClass:
    @big.pure_virtual()
    def on_reset(self):
        ...

`try_float(o)`

Returns True if o can be converted into a float, and False if it can't.

`try_int(o)`

Returns True if o can be converted into an int, and False if it can't.

`big.deprecated`

Old versions of functions (and classes) from big. These versions are deprecated, either because the name was changed, or the semantics were changed, or both.

Unlike the other modules, the contents of big.deprecated aren't automatically imported into big.all. (big.all does import the deprecated submodule, it just doesn't from deprected import * all the symbols.)

`big.file`

Functions for working with files, directories, and I/O.

`fgrep(path, text, *, encoding=None, enumerate=False, case_insensitive=False)`

Find the lines of a file that match some text, like the UNIX fgrep utility program.

path should be an object representing a path to an existing file, one of:

a string,
a bytes object, or
a pathlib.Path object.

text should be either string or bytes.

encoding is used as the file encoding when opening the file.

If text is a str, the file is opened in text mode.
If text is a bytes object, the file is opened in binary mode. encoding must be None when the file is opened in binary mode.

If case_insensitive is true, perform the search in a case-insensitive manner.

Returns a list of lines in the file containing text. The lines are either strings or bytes objects, depending on the type of pattern. The lines have their newlines stripped but preserve all other whitespace.

If enumerate is true, returns a list of tuples of (line_number, line). The first line of the file is line number 1.

For simplicity of implementation, the entire file is read in to memory at one time. If case_insensitive is true, fgrep also makes a lowercased copy.

`file_mtime(path)`

Returns the modification time of path, in seconds since the epoch. Note that seconds is a float, indicating the sub-second with some precision.

`file_mtime_ns(path)`

Returns the modification time of path, in nanoseconds since the epoch.

`file_size(path)`

Returns the size of the file at path, as an integer representing the number of bytes.

`grep(path, pattern, *, encoding=None, enumerate=False, flags=0)`

Look for matches to a regular expression pattern in the lines of a file, similarly to the UNIX grep utility program.

path should be an object representing a path to an existing file, one of:

a string,
a bytes object, or
a pathlib.Path object.

pattern should be an object containing a regular expression, one of:

a string,
a bytes object, or
an re.Pattern, initialized with either str or bytes.

encoding is used as the file encoding when opening the file.

If pattern uses a str, the file is opened in text mode. If pattern uses a bytes object, the file is opened in binary mode. encoding must be None when the file is opened in binary mode.

flags is passed in as the flags argument to re.compile if pattern is a string or bytes. (It's ignored if pattern is an re.Pattern object.)

Returns a list of lines in the file matching the pattern. The lines are either strings or bytes objects, depending on the type of text. The lines have their newlines stripped but preserve all other whitespace.

If enumerate is true, returns a list of tuples of (line_number, line). The first line of the file is line number 1.

For simplicity of implementation, the entire file is read in to memory at one time.

Tip: to perform a case-insensitive pattern match, pass in the re.IGNORECASE flag into flags for this function (if pattern is a string or bytes) or when creating your regular expression object (if pattern is an re.Pattern object.

(In older versions of Python, re.Pattern was a private type called re._pattern_type.)

`pushd(directory)`

A context manager that temporarily changes the directory. Example:

with big.pushd('x'):
    pass

This would change into the 'x' subdirectory before executing the nested block, then change back to the original directory after the nested block.

You can change directories in the nested block; this won't affect pushd restoring the original current working directory upon exiting the nested block.

You can safely nest with pushd blocks.

`safe_mkdir(path)`

Ensures that a directory exists at path. If this function returns and doesn't raise, it guarantees that a directory exists at path.

If a directory already exists at path, safe_mkdir does nothing.

If a file exists at path, safe_mkdir unlinks path then creates the directory.

If the parent directory doesn't exist, safe_mkdir creates that directory, then creates path.

This function can still fail:

path could be on a read-only filesystem.
You might lack the permissions to create path.
You could ask to create the directory x/y and x is a file (not a directory).

`safe_unlink(path)`

Unlinks path, if path exists and is a file.

`touch(path)`

Ensures that path exists, and its modification time is the current time.

If path does not exist, creates an empty file.

If path exists, updates its modification time to the current time.

`translate_filename_to_exfat(s)`

Ensures that all characters in s are legal for a FAT filesystem.

Returns a copy of s where every character not allowed in a FAT filesystem filename has been replaced with a character (or characters) that are permitted.

`translate_filename_to_unix(s)`

Ensures that all characters in s are legal for a UNIX filesystem.

Returns a copy of s where every character not allowed in a UNIX filesystem filename has been replaced with a character (or characters) that are permitted.

`big.graph`

A drop-in replacement for Python's graphlib.TopologicalSorter with an enhanced API. This version of TopologicalSorter allows modifying the graph at any time, and supports multiple simultaneous views, allowing iteration over the graph more than once.

See the Enhanced TopologicalSorter deep-dive for more information.

`CycleError()`

Exception thrown by TopologicalSorter when it detects a cycle.

`TopologicalSorter(graph=None)`

An object representing a directed graph of nodes. See Python's graphlib.TopologicalSorter for concepts and the basic API.

New methods on TopologicalSorter:

`TopologicalSorter.copy()`

Returns a shallow copy of the graph. The copy also duplicates the state of get_ready and done.

`TopologicalSorter.cycle()`

Checks the graph for cycles. If no cycles exist, returns None. If at least one cycle exists, returns a tuple containing nodes that constitute a cycle.

`TopologicalSorter.print(print=print)`

Prints the internal state of the graph. Used for debugging.

print is the function used for printing; it should behave identically to the builtin print function.

`TopologicalSorter.remove(node)`

Removes node from the graph.

If any node P depends on a node N, and N is removed, this dependency is also removed, but P is not removed from the graph.

Note that, while remove() works, it's slow. (It's O(N).) TopologicalSorter is optimized for fast adds and fast views.

`TopologicalSorter.reset()`

Resets get_ready and done to their initial state.

`TopologicalSorter.view()`

Returns a new View object on this graph.

`TopologicalSorter.View`

A view on a TopologicalSorter graph object. Allows iterating over the nodes of the graph in dependency order.

Methods on a View object:

`TopologicalSorter.View.bool()`

Returns True if more work can be done in the view--if there are nodes waiting to be yielded by get_ready, or waiting to be returned by done.

Aliased to TopologicalSorter.is_active for compatibility with graphlib.

`TopologicalSorter.View.close()`

Closes the view. A closed view can no longer be used.

`TopologicalSorter.View.copy()`

Returns a shallow copy of the view, duplicating its current state.

`TopologicalSorter.View.done(*nodes)`

Marks nodes returned by ready as "done", possibly allowing additional nodes to be available from ready.

`TopologicalSorter.View.print(print=print)`

Prints the internal state of the view, and its graph. Used for debugging.

print is the function used for printing; it should behave identically to the builtin print function.

`TopologicalSorter.View.ready()`

Returns a tuple of "ready" nodes--nodes with no predecessors, or nodes whose predecessors have all been marked "done".

Aliased to TopologicalSorter.get_ready for compatibility with graphlib.

`TopologicalSorter.View.reset()`

Resets the view to its initial state, forgetting all "ready" and "done" state.

`big.heap`

Functions for working with heap objects. Well, just one heap object really.

`Heap(i=None)`

An object-oriented wrapper around the heapq library, designed to be easy to use--and easy to remember how to use. The heapq library implements a binary heap, a data structure used for sorting; you add objects to the heap, and you can then remove objects in sorted order. Heaps are useful because they have are efficient both in space and in time; they're also inflexible, in that iterating over the sorted items is destructive.

The Heap API in big mimics the list and collections.deque objects; this way, all you need to remember is "it works kinda like a list object". You append new items to the heap, then popleft them off in sorted order.

By default Heap creates an empty heap. If you pass in an iterable i to the constructor, this is equivalent to calling the extend(i) on the freshly-constructed Heap.

In addition to the below methods, Heap objects support iteration, len, the in operator, and use as a boolean expression. You can also index or slice into a Heap object, which behaves as if the heap is a list of objects in sorted order. Getting the first item (Heap[0], aka peek) is cheap, the other operations can get very expensive.

Methods on a Heap object:

`Heap.append(o)`

Adds object o to the heap.

`Heap.clear()`

Removes all objects from the heap, resetting it to empty.

`Heap.copy()`

Returns a shallow copy of the heap. Only duplicates the heap data structures itself; does not duplicate the objects in the heap.

`Heap.extend(i)`

Adds all the objects from the iterable i to the heap.

`Heap.remove(o)`

If object o is in the heap, removes it. If o is not in the heap, raises ValueError.

`Heap.popleft()`

If the heap is not empty, returns the first item in the heap in sorted order. If the heap is empty, raises IndexError.

`Heap.append_and_popleft(o)`

Equivalent to calling Heap.append(o) immediately followed by Heap.popleft(). If o is smaller than any other object in the heap at the time it's added, this will return o.

`Heap.popleft_and_append(o)`

Equivalent to calling Heap.popleft() immediately followed by Heap.append(o). This method will never return o, unless o was already in the heap before the method was called.

`Heap.queue`

Not a method, a property. Returns a copy of the contents of the heap, in sorted order.

`big.itertools`

Functions and classes for working with iteration. Only one entry so far.

`PushbackIterator(iterable=None)`

Wraps any iterator, allowing you to push items back on the iterator. This allows you to "peek" at the next item (or items); you can get the next item, examine it, and then push it back. If any objects have been pushed onto the iterator, they are yielded first, before attempting to yield from the wrapped iterator.

The constructor accepts one argument, an iterable, with a default of None. If iterable is None, the PushbackIterator is created in an exhausted state.

When the wrapped iterable is exhausted (or if you passed in None to the constructor) you can still call the push method to add items, at which point the PushBackIterator can be iterated over again.

In addition to the following methods, PushbackIterator supports the iterator protocol and testing for truth. A PushbackIterator is true if iterating over it will yield at least one value.

`PushbackIterator.next(default=None)`

Equivalent to next(PushbackIterator), but won't raise StopIteration. If the iterator is exhausted, returns the default argument.

`PushbackIterator.push(o)`

Pushes a value into the iterator's internal stack. When a PushbackIterator is iterated over, and there are any pushed values, the top value on the stack will be popped and yielded. PushbackIterator only yields from the iterator it wraps when this internal stack is empty.

`big.log`

A simple and lightweight logging class, useful for performance analysis. Not intended as a full-fledged logging facility like Python's logging module.

`default_clock()`

The default clock function used by the Log class. This function returns elapsed time in nanoseconds, expressed as an integer.

In Python 3.7+, this is time.monotonic_ns; in Python 3.6 this is a custom function that calls time.perf_counter, then converts that time to an integer number of nanoseconds.

`Log(*, clock=None)`

A simple and lightweight logging class, useful for performance analysis. Not intended as a full-fledged logging facility like Python's logging module.

Allows nesting, which is literally just a presentation thing.

The clock named parameter specifies the function the Log object should call to get the time. This function should return an int, representing elapsed time in nanoseconds.

To use: first, create your Log object.

log = Log()

Then log events by calling your Log object, passing in a string describing the event.

log('text')

Enter a nested subsystem containing events with log.enter:

log.enter('subsystem')

Then later exit that subsystem with log.exit:

log.exit()

And finally print the log:

log.print()

You can also iterate over the log events using iter(log). This yields 4-tuples:

    (start_time, elapsed_time, event, depth)

start_time and elapsed_time are times, expressed as an integer number of nanoseconds. The first event is at start_time 0, and all subsequent start times are relative to that time.

event is the event string you passed in to log() (or "<subsystem> start" or "<subsystem> end").

depth is an integer indicating how many subsystems the event is nested in; larger numbers indicate deeper nesting.

`Log.enter(subsystem)`

Notifies the log that you've entered a subsystem. The subsystem parameter should be a string describing the subsystem.

This is really just a presentation thing; all subsequent logged entries will be indented until you make the corresponding log.exit() call.

You may nest subsystems as deeply as you like.

`Log.exit()`

Exits a logged subsystem. See Log.enter.

`Log.print(*, print=None, title="[event log]", headings=True, indent=2, seconds_width=2, fractional_width=9)`

Prints the log.

Keyword-only parameters:

print specifies the print function to use, default is builtins.print.

title specifies the title to print at the beginning. Default is "[event log]". To suppress, pass in None.

headings is a boolean; if True (the default), prints column headings for the log.

indent is the number of spaces to indent in front of log entries, and also how many spaces to indent each time we enter a subsystem.

seconds_width is how wide to make the seconds column, default 2.

fractional_width is how wide to make the fractional column, default 9.

`Log.reset()`

Resets the log to its initial state. After resetting the log, the log is empty except for the initial "log start" message, the elapsed time is zero, and the log has not "entered" any subsystems.

`big.metadata`

Contains metadata about big itself.

`metadata.version`

A Version object representing the current version of big.

`big.scheduler`

A replacement for Python's sched.scheduler object, adding full threading support and a modern Python interface.

Python's sched.scheduler object was added way back in 1991, and it was full of clever ideas. It abstracted away the concept of time from its interface, allowing it to be adapted to new schemes of measuring time--including mock time, making testing easy and repeatable. Very nice!

Unfortunately, sched.scheduler predates multithreading becoming common, much less multicore computers. It certainly predates threading support in Python. And its API isn't flexible enough to correctly handle some common scenarios in multithreaded programs:

If one thread is blocking on sched.scheduler.run, and the next scheduled event will occur at time T, and a second thread schedules a new event which occurs at a time < T, sched.scheduler.run won't return any events to the first thread until time T.
If one thread is blocking on sched.scheduler.run, and the next scheduled event will occur at time T, and a second thread cancels all events, sched.scheduler.run won't exit until time T.

big's Scheduler object fixes both these problems.

Also, sched.scheduler is thirty years behind the times in Python API design--its design predates many common modern Python conventions. Its events are callbacks, which it calls directly. Scheduler fixes this: its events are objects, and you iterate over the Scheduler object to see events as they occur.

Scheduler also benefits from thirty years of experience with sched.scheduler. In particular, big reimplements the relevant parts of the sched.scheduler test suite, ensuring Scheduler will never trip over the problems discovered by sched.scheduler over its lifetime.

`Event(scheduler, event, time, priority, sequence)`

An object representing a scheduled event in a Scheduler. You shouldn't need to create them manually; Event objects are created automatically when you add events to a Scheduler.

Supports one method:

`Event.cancel()`

Cancels this event. If this event has already been canceled, raises ValueError.

`Regulator()`

An abstract base class for Scheduler regulators.

A "regulator" handles all the details about time for a Scheduler. Scheduler objects don't actually understand time; it's all abstracted away by the Regulator.

You can implement your own Regulator and use it with Scheduler. Your Regulator subclass must implement three methods: now, sleep, and wake. It must also provide a lock attribute.

Normally a Regulator represents time using a floating-point number, representing a fractional number of seconds since some epoch. But this isn't strictly necessary. Any Python object that fulfills these requirements will work:

The time class must implement __le__, __eq__, __add__, and __sub__, and these operations must be consistent in the same way they are for number objects.
If a and b are instances of the time class, and a.__le__(b) is true, then a must either be an earlier time, or a smaller interval of time.
The time class must also implement rich comparison with numbers (integers and floats), and 0 must represent both the earliest time and a zero-length interval of time.

`Regulator.lock`

A lock object. The Scheduler uses this lock to protect its internal data structures.

Must support the "context manager" protocol (__enter__ and __exit__). Entering the object must acquire the lock; exiting must release the lock.

This lock does not need to be recursive.

`Regulator.now()`

Returns the current time in local units. Must be monotonically increasing; for any two calls to now during the course of the program, the later call must never have a lower value than the earlier call.

A Scheduler will only call this method while holding this regulator's lock.

`Regulator.sleep(t)`

Sleeps for some amount of time, in local units. Must support an interval of 0, which should represent not sleeping. (Though it's preferable that an interval of 0 yields the rest of the current thread's remaining time slice back to the operating system.)

If wake is called on this Regulator object while a different thread has called this function to sleep, sleep must abandon the rest of the sleep interval and return immediately.

A Scheduler will only call this method while not holding this regulator's lock.

`Regulator.wake()`

Aborts all current calls to sleep on this Regulator, across all threads.

A Scheduler will only call this method while holding this regulator's lock.

`Scheduler(regulator=default_regulator)`

Implements a scheduler. The only argument is the "regulator" object to use; the regulator abstracts away all time-related details for the scheduler. By default Scheduler uses an instance of SingleThreadedRegulator, which is not thread-safe.

(If you need the scheduler to be thread-safe, pass in an instance of a thread-safe Regulator class like ThreadSafeRegulator.)

In addition to the below methods, Scheduler objects support being evaluated in a boolean context (they are true if they contain any events), and they support being iterated over. Iterating over a Scheduler object blocks until the next event comes due, at which point the Scheduler yields that event. An empty Scheduler that is iterated over raises StopIteration. You can reuse Scheduler objects, iterating over them until empty, then adding more objects and iterating over them again.

`Scheduler.schedule(o, time, *, absolute=False, priority=DEFAULT_PRIORITY)`

Schedules an object o to be yielded as an event by this schedule object at some time in the future.

By default the time value is a relative time value, and is added to the current time; using a time value of 0 should schedule this event to be yielded immediately.

If absolute is true, time is regarded as an absolute time value.

If multiple events are scheduled for the same time, they will be yielded by order of priority. Lowever values of priority represent higher priorities. The default value is Scheduler.DEFAULT_PRIORITY, which is 100. If two events are scheduled for the same time, and have the same priority, Scheduler will yield the events in the order they were added.

Returns an Event object, which can be used to cancel the event.

`Scheduler.cancel(event)`

Cancels a scheduled event. event must be an object returned by this Scheduler object. If event is not currently scheduled in this Scheduler object, raises ValueError.

`Scheduler.queue`

A list of the currently scheduled Event objects, in the order they will be yielded.

`Scheduler.non_blocking()`

Returns an iterator for the events in the Scheduler that only yields the events that are currently due. Never blocks; if the next event is not due yet, raises StopIteration.

`SingleThreadedRegulator()`

An implementation of Regulator designed for use in single-threaded programs. It doesn't support multiple threads, and in particular is not thread-safe. But it's much higher performance than thread-safe Regulator implementations.

`ThreadSafeRegulator()`

A thread-safe implementation of Regulator designed for use in multithreaded programs.

`big.state`

Library code for working with simple state machines.

There are lots of popular Python libraries for implementing state machines. But they all seem to be designed for large-scale state machines. These libraries are sophisticated and data-driven, with expansive APIs. And, as a rule, they require the state to be a passive object (e.g. an Enum), and require you to explicitly describe every possible state transition.

This approach is great for massive, super-complex state machines--you need the features of a sophisticated library to manage all that complexity. It also enables clever features like automatically generating diagrams of your state machine, which is great!

But most of the time this level of sophistication is unnecessary. There are lots of use cases for small scale, simple state machines, where this data-driven approach and expansive, complex API only gets in the way. I prefer writing my state machines with active objects--where states are implemented as classes, events are implemented as method calls on those classes, and you transition to a new state by simply overwriting a state attribute with a different state instance.

big.state makes this style of state machine easy. It has a deliberately minimal, simple interface--the constructor for the main StateManager class only has four parameters, and it only exposes three attributes. The module also has two decorators to make your life easier. And that's it! But even this small API surface area makes it effortless to write large scale state machines.

(But you can also write tiny data-driven state machines too. Although big.state makes state machines with active states easy to write, it's agnostic about how you actually implement your state machine. big.state makes it easy to write any kind of state machine you like!)

big.state provides features like:

method calls that get called when entering and exiting a state,
"observers", callables that get called each time you transition to a new state, and
safety mechanisms to catch bugs and prevent design mistakes.

Recommended best practices

The main class in big.state is StateManager. This class maintains the current "state" of your state machine, and manages transitions to new states. The constructor takes one required parameter, the initial state.

Here are my recommendations for best practices when working with StateManager for medium-sized and larger state machines:

Your state machine should be implemented as a class.
- You should store StateManager as an attribute of that class, preferably called state_manager. (Your state machine should have a "has-a" relationship with StateManager, not an "is-a" relationship where it inherits from StateManager.)
- You should decorate your state machine class with the accessor decorator--this will save you a lot of boilerplate. If your state machine is stored in o, decorating with accessor lets you can access the current state using o.state instead of o.state_manager.state.
Every state should be implemented as a class.
- You should have a base class for your state classes, containing whatever functionality they have in common.
- You're encouraged to define these state classes inside your state machine class, and use BoundInnerClass so they automatically get references to the state machine they're a part of.
Events should be method calls made on your state machine object.
- Your state base class should have a method for every event, decorated with `pure_virtual'.
- As a rule, events should be dispatched from the state machine to a method call on the current state with the same name.
- If all the code to handle a particular event lives in the states, use the dispatch decorator to save you more boilerplate when calling the event method. Similarly to accessor, this creates a new method for you that calls the equivalent method on the current state, passing in all the arguments it received.

Example code

Here's a simple example demonstrating all this functionality. It's a state machine with two states, On and Off, and one event method toggle. Calling toggle transitions the state machine from the Off state to the On state, and vice-versa.

from big.all import accessor, BoundInnerClass, dispatch, pure_virtual, StateManager

@accessor()
class StateMachine:
    def __init__(self):
        self.state_manager = StateManager(self.Off())

    @dispatch()
    def toggle(self):
        ...

    @BoundInnerClass
    class State:
        def __init__(self, state_machine):
            self.state_machine = state_machine

        def __repr__(self):
            return f"<{type(self).__name__}>"

        @pure_virtual()
        def toggle(self):
            ...

    @BoundInnerClass
    class Off(State.cls):
        def on_enter(self):
            print("off!")

        def toggle(self):
            sm = self.state_machine
            sm.state = sm.On() # sm.state is the accessor

    @BoundInnerClass
    class On(State.cls):
        def on_enter(self):
            print("on!")

        def toggle(self):
            sm = self.state_machine
            sm.state = sm.Off()

sm = StateMachine()
print(sm.state)
for _ in range(3):
    sm.toggle()
    print(sm.state)

This code demonstrates both accessor and dispatch. accessor lets us reference the current state with sm.state instead of sm.state_manager.state, and dispatch lets us call sm.toggle() instead of sm.state_manager.state.toggle().

For a more complete example of working with StateManager, see the test_vending_machine test code in tests/test_state.py in the big source tree.

`accessor(attribute='state', state_manager='state_manager')`

Class decorator. Adds a convenient state accessor attribute to your class.

When you have a state machine class containing a StateManager object, it can be wordy and inconvenient to access the state through the state machine attribute:

    class StateMachine:
        def __init__(self):
            self.state_manager = StateManager(self.InitialState)
        ...
    sm = StateMachine()
    # vvvvvvvvvvvvvvvvvvvv that's a lot!
    sm.state_manager.state = NextState()

The accessor class decorator creates a property for you--a shortcut that directly accesses the state attribute of your state manager. Just decorate your state machine class with @accessor():

    @accessor()
    class StateMachine:
        def __init__(self):
            self.state_manager = StateManager(self.InitialState)
        ...
    sm = StateMachine()
    # vvvvvv that's a lot shorter!
    sm.state = NextState()

The state attribute evaluates to the same value:

    sm.state == sm.state_manager.state

And setting it sets the state on your StateManager instance. These two statements now do the same thing:

    sm.state_manager.state = new_state
    sm.state = new_state

By default, this decorator assumes your StateManager instance is in the state_manager attribute, and you want to name the new accessor attribute state. You can override these defaults; the decorator's first parameter, attribute, should be the string used for the new accessor attribute, and the second parameter, state_manager, should be the name of the attribute where your StateManager instance is stored.

For example, if your state manager is stored in an attribute called sm, and you want the short-cut to be called st, you'd decorate your state machine class with

@accessor(attribute='st', state_manager='sm')

`dispatch(state_manager='state_manager', *, prefix='', suffix='')`

Decorator for state machine event methods, dispatching the event from the state machine object to its current state.

dispatch helps with the following scenario:

You have your own state machine class which contains a StateManager object.
You want your state machine class to have methods representing events.
Rather than handle those events in your state machine object itself, you want to dispatch them to the current state.

Simply create a method in your state machine class with the correct name and parameters but a no-op body, and decorate it with @dispatch. The dispatch decorator will rewrite your method so it calls the equivalent method on the current state, passing through all the arguments.

For example, instead of writing this:

    class StateMachine:
        def __init__(self):
            self.state_manager = StateManager(self.InitialState)

        def on_sunrise(self, time, *, verbose=False):
            return self.state_manager.state.on_sunrise(time, verbose=verbose)

you can literally write this, which does the same thing:

    class StateMachine:
        def __init__(self):
            self.state_manager = StateManager(self.InitialState)

        @dispatch()
        def on_sunrise(self, time, *, verbose=False):
            ...

Here, the on_sunrise function you wrote is actually thrown away. (That's why the body is simply one "..." statement.) Your function is replaced with a function that gets the state_manager attribute from self, then gets the state attribute from that StateManager instance, then calls a method with the same name as the decorated function, passing in using *args and **kwargs.

Note that, as a stylistic convention, you're encouraged to literally use a single ellipsis as the body of these functions, as in the example above. This is a visual cue to readers that the body of the function doesn't matter. (In fact, the original on_sunrise method above is thrown away inside the decorator, and replaced with a customized method dispatch function.)

The state_manager argument to the decorator should be the name of the attribute where the StateManager instance is stored in self. The default is 'state_manager', but you can specify a different string if you've stored your StateManager in another attribute. For example, if your state manager is in the attribute smedley, you'd decorate with:

    @dispatch('smedley')

The prefix and suffix arguments are strings added to the beginning and end of the method call we call on the current state. For example, if you want the method you call to have an active verb form (e.g. reset), but you want it to directly call an event handler that starts with on_ by convention (e.g. on_reset), you could do this:

    @dispatch(prefix='on_')
    def reset(self):
        ...

This is equivalent to:

    def reset(self):
        return self.state_manager.state.on_reset()

If you have more than one event method, instead of decorating every event method with the same copy-and-pasted dispatch call, it's better to call dispatch once, cache the function it returns, and decorate with that. Like so:

    my_dispatch = dispatch('smedley', prefix='on_')

    @my_dispatch
    def reset(self):
        ...

    @my_dispatch
    def sunrise(self):
        ...

`State()`

Base class for state machine state implementation classes. Use of this base class is optional; states can be instances of any type except types.NoneType.

`StateManager(state, *, on_enter='on_enter', on_exit='on_exit', state_class=None)`

Simple, Pythonic state machine manager.

Has three public attributes:

state

The current state. You transition from one state to another by assigning to this attribute.

next

The state the StateManager is transitioning to, if it's currently in the process of transitioning to a new state. If the StateManager isn't currently transitioning to a new state, its next attribute is None. And if the StateManager is currently transitioning to a new state, its next attribute will not be None.

During the time the manager is currently transitioning to a new state, it's illegal to start a second transition. (In other words: you can't assign to state while next is not None.)

observers

A list of callables that get called during every state transition. It's initially empty; you may add and remove observers to the list as needed.

The callables will be called with one positional argument, the state manager object.
Since observers are called during the state transition, they aren't permitted to initiate state transitions.
You're permitted to modify the list of observers at any time--even from inside an observer callback. Note that this won't modify the list of observers called until the next state transition. (StateManager uses a copy of the observer list.)

The constructor takes the following parameters:

state

The initial state. It can be any valid state object; by default, any Python value can be a state except None. (But also see the state_class parameter below.)

on_enter

on_enter represents a method call on states called when entering that state. The value itself is a string used to look up an attribute on state objects; by default on_enter is the string 'on_enter', but it can be any legal Python identifier string, or any false value.

If on_enter is a valid identifier string, and this StateManager object transitions to a state object O, and O has an attribute with this name, StateManager will call that attribute (with no arguments) immediately after transitioning to that state. Passing in a false value for on_enter disables this behavior.

on_enter is called immediately after the transition is complete, which means you're expressly permitted to make a state transition inside an on_enter call.

If defined, on_exit will be called on the initial state object, from inside the StateManager constructor.

on_exit

on_exit is similar to on_enter, except the attribute is called when transitioning away from a state object. Its default value is 'on_exit'.

on_exit is called during the state transition, which means you're expressly forbidden from making a state transition inside an on_exit call.

state_class

state_class is used to enforce that this StateManager only ever transitions to valid state objects. It should be either None or a class. If it's a class, the StateManager object will require every value assigned to its state attribute to be an instance of that class. If it's None, states can be any object (except None).

State transitions

To transition to a new state, simply assign to the 'state' attribute.

If state_class is None, you may use any value as a state except None.
It's illegal to assign to state while currently transitioning to a new state. (Or, in other words, at any time self.next is not None.)
If the current state object has an on_exit method, it will be called (with zero arguments) during the the transition to the next state. This means it's illegal to initiate a state transition inside an on_exit call.
If you assign an object to state that has an on_enter attribute, that method will be called (with zero arguments) immediately after we have transitioned to that state. This means it's permitted to initiate a state transition inside an on_enter call.
It's illegal to attempt to transition to the current state. If state_manager.state is already foo, state_manager.state = foo will raise an exception.

Sequence of events during a state transition

If you have an StateManager instance called state_manager, and you transition it to new_state:

    state_manager.state = new_state

StateManager will execute the following sequence of events:

Set state_manager.next to new_state.
- At of this moment state_manager is "transitioning" to the new state.
If state_manager.state has an on_exit attribute, call state_manager.state.on_exit().
For every object o in the state_manager.observer list, call o(self).
Set state_manager.next to None.
Set state_manager.state to new_state.
- As of this moment, the transition is complete, and state_manager is now "in" the new state.
If state_manager.state has an on_enter attribute, call state_manager.state.on_enter().

`TransitionError()`

Exception raised when attempting to execute an illegal state transition.

There are only two types of illegal state transitions:

An attempted state transition while we're in the process of transitioning to another state. In other words, if state_manager is your StateManager object, you can't set state_manager.state when state_manager.next is not None.
An attempt to transition to the current state. This is illegal:

  state_manager = StateManager()
  state_manager.state = foo
  state_manager.state = foo # <-- this statement raises TransitionError

Note that transitioning to a different but identical object is expressly permitted.

`big.text`

Functions for working with text strings. There are several families of functions inside the text module; for a higher-level view of those families, read the following deep-dives:

The multi- family of string functions
lines and lines modifier functions
Word wrapping and formatting

All the functions in big.text will work with either str or bytes objects, except the three Word wrapping and formatting functions. When working with bytes, by default the functions will only work with ASCII characters.

Support for bytes and str

The big text functions all support both str and bytes. The functions all automatically detect whether you passed in str or bytes using an intentionally simple and predictable process, as follows:

At the start of each function, it'll test its first "string" argument to see if it's a bytes object.

is_bytes = isinstance(<argument>, bytes)

If isinstance returns True, the function assumes all arguments are bytes objects. Otherwise the function assumes all arguments are str objects.

As a rule, no further testing, casting, or catching exceptions is done.

Functions that take multiple string-like parameters require all such arguments to be the same type. These functions will check that all such arguments are of the same type.

Subclasses of str and bytes will also work; anywhere you should pass in a str, you can also pass in a subclass of str, and likewise for bytes.

`ascii_linebreaks`

A tuple of str objects, representing every line-breaking whitespace character defined by ASCII.

Useful as a separator argument for big functions that accept one, e.g. the big "multi-" family of functions, or the lines and lines modifier functions.

Also contains '\r\n'. If you don't want to include this string, use ascii_linebreaks_without_crlf instead. See the deep-dive section on The Unix, Mac, and DOS line-break conventions for more.

For more information, please see the Whitespace and line-breaking characters in Python and big deep-dive.

`ascii_linebreaks_without_crlf`

Equivalent to ascii_linebreaks without '\r\n'.

`ascii_whitespace`

A tuple of str objects, representing every whitespace character defined by ASCII.

Useful as a separator argument for big functions that accept one, e.g. the big "multi-" family of functions, or the lines and lines modifier functions.

Also contains '\r\n'. If you don't want to include this string, use ascii_whitespace_without_crlf instead. See the deep-dive section on The Unix, Mac, and DOS line-break conventions for more.

For more information, please see the Whitespace and line-breaking characters in Python and big deep-dive.

`ascii_whitespace_without_crlf`

Equivalent to ascii_whitespace without '\r\n'.

`bytes_linebreaks`

A tuple of bytes objects, representing every line-breaking whitespace character recognized by the Python bytes object.

Useful as a separator argument for big functions that accept one, e.g. the big "multi-" family of functions, or the lines and lines modifier functions.

Also contains b'\r\n'. If you don't want to include this string, use bytes_linebreaks_without_crlf instead. See the deep-dive section on The Unix, Mac, and DOS line-break conventions for more.

For more information, please see the Whitespace and line-breaking characters in Python and big deep-dive.

`bytes_linebreaks_without_crlf`

Equivalent to bytes_linebreaks with '\r\n' removed.

`bytes_whitespace`

A tuple of bytes objects, representing every line-breaking whitespace character recognized by the Python bytes object. (bytes.isspace, bytes.split, etc will tell you which characters are considered whitespace...)

Useful as a separator argument for big functions that accept one, e.g. the big "multi-" family of functions, or the lines and lines modifier functions.

Also contains b'\r\n'. If you don't want to include this string, use bytes_whitespace_without_crlf instead. See the deep-dive section on The Unix, Mac, and DOS line-break conventions for more.

For more information, please see the Whitespace and line-breaking characters in Python and big deep-dive.

`bytes_whitespace_without_crlf`

Equivalent to bytes_whitespace without '\r\n'.

`combine_splits(s, *split_arrays)`

Takes a string s, and one or more "split arrays", and applies all the splits to s. Returns an iterator of the resulting string segments.

A "split array" is an array containing the original string, but split into multiple pieces. For example, the string "a b c d e" could be split into the split array ["a ", "b ", "c ", "d ", "e"].

For example,

    combine_splits('abcde', ['abcd', 'e'], ['a', 'bcde'])

returns ['a', 'bcd', 'e'].

Note that the split arrays must contain all the characters from s. ''.join(split_array) must recreate s. combine_splits only examines the lengths of the strings in the split arrays, and makes no attempt to infer stripped characters. (So, don't use the string's .split method if you want to use combine_splits. Instead, consider big's multisplit with keep=True or keep=ALTERNATING.)

`Delimiter(close, *, escape='', multiline=True, quoting=False)`

Class representing a delimiter for split_delimiters.

close is the closing delimiter character. It must be a valid string or bytes object, and cannot be a backslash ('"\"' or b"\\").

If escape is true, it should be a string; when inside this delimiter, you can escape the trailing delimiter with this string. If escape is false, there is no escape string for this delimiter.

quoting is a boolean: does this set of delimiters "quote" the text inside? When an open delimiter enables quoting, split_delimiters will ignore all other delimiters in the text until it encounters the matching close delimiter. (Single- and double-quotes set this to True.)

Currently escape and quoting must either both be true or both be false.

If multiline is true, the closing delimiter may be on the current line or any subsequent line. If multiline is false, the closing delimiter must appear on the current line.

`encode_strings(o, *, encoding='ascii')`

Converts an object o from str to bytes. If o is a container, recursively converts all objects and containers inside.

o and all objects inside o must be either bytes, str, dict, set, list, tuple, or a subclass of one of those.

Encodes every string inside using the encoding specified in the encoding parameter, default is `'ascii'``.

Handles nested containers.

If o is of, or contains, a type not listed above, raises TypeError.

`gently_title(s, *, apostrophes=None, double_quotes=None)`

Uppercases the first character of every word in s, leaving the other letters alone. s should be str or bytes.

(For the purposes of this algorithm, words are any contiguous run of non-whitespace characters.)

This function will also capitalize the letter after an apostrophe if the apostrophe:

is immediately after whitespace, or
is immediately after a left parenthesis character ('('), or
is the first letter of the string, or
is immediately after a letter O or D, when that O or D
- is after whitespace, or
- is the first letter of the string.

In this last case, the O or D will also be capitalized.

Finally, this function will capitalize the letter after a quote mark if the quote mark:

is after whitespace, or
is the first letter of a string.

(A run of consecutive apostrophes and/or quote marks is considered one quote mark for the purposes of capitalization.)

All these rules mean gently_title correctly handles internally quoted strings:

    He Said 'No I Did Not'

and contractions that start with an apostrophe:

    'Twas The Night Before Christmas

as well as certain Irish, French, and Italian names:

    Peter O'Toole
    Lord D'Arcy

If specified, apostrophes should be a str or bytes object containing characters that should be considered apostrophes. If apostrophes is false, and s is bytes, apostrophes is set to a bytes object containing the only ASCII apostrophe character:

If apostrophes is false and s is str, apostrophes is set to a string containing these Unicode apostrophe code points:

    '‘’‚‛

Note that neither of these strings contains the "back-tick" character:

This is a diacritical used for modifying letters, and isn't used as an apostrophe.

If specified, double_quotes should be a str or bytes object containing characters that should be considered double-quote characters. If double_quotes is false, and s is bytes, double_quotes is set to a bytes object containing the only ASCII double-quote character:

If double_quotes is false and s is str, double_quotes is set to a string containing these Unicode double-quote code points:

    "“”„‟«»‹›

`int_to_words(i, *, flowery=True, ordinal=False)`

Converts an integer into the equivalent English string.

int_to_words(2) -> "two"
int_to_words(35) -> "thirty-five"

If the keyword-only parameter flowery is true (the default), you also get commas and the word and where you'd expect them. (When flowery is true, int_to_words(i) produces identical output to inflect.engine().number_to_words(i), except for negative numbers: inflect starts negative numbers with "minus", big starts them with "negative".)

If the keyword-only parameter ordinal is true, the string produced describes that ordinal number (instead of that cardinal number). Ordinal numbers describe position, e.g. where a competitor placed in a competition. In other words, int_to_words(1) returns the string 'one', but int_to_words(1, ordinal=True) returns the string 'first'.

Numbers >= 10**66 (one thousand vigintillion) are only converted using str(i). Sorry!

`linebreaks`

A tuple of str objects, representing every line-breaking whitespace character recognized by the Python str object. Identical to str_linebreaks.

Useful as a separator argument for big functions that accept one, e.g. the big "multi-" family of functions, or the lines and lines modifier functions.

Also contains '\r\n'. See the deep-dive section on The Unix, Mac, and DOS line-break conventions for more.

For more information, please see the Whitespace and line-breaking characters in Python and big deep-dive.

`linebreaks_without_crlf`

Equivalent to linebreaks without '\r\n'.

`LineInfo(lines, line, line_number, column_number, *, leading=None, trailing=None, end=None, indent=0, match=None, **kwargs)`

The first object in the 2-tuple yielded by a lines iterator, containing metadata about the line. Every parameter to the constructor is stored as an attribute of the new LineInfo object using the same identifier.

line is the original unmodified line, split from the original s input to lines. Note that line includes the trailing newline character, if any.

line_number is the line number of this line. column_numberis the starting column of the accompanyinglinestring (the second entry in the 2-tuple yielded bylines`).

leading and trailing are strings that have been stripped from the beginning or end of the original line, if any. (Not counting the line-terminating linebreak character.)

end is the linebreak character that terminated the current line, if any. If the s passed in to lines is an iterator yielding strings, end will always be an empty string.

indent is the indent level of the current line, represented as an integer. See lines_strip_indent. If the indent level hasn't been measured yet this should be 0.

match is the re.Match object that matched this line, if any. See lines_grep.

You can add your own fields by passing them in via **kwargs; you can also add new attributes or modify existing attributes as needed from inside a "lines modifier" function.

For more information, see the deep-dive on lines and lines modifier functions.

`LineInfo.clip_leading(line, s)`

Clip the leading substring s from line.

s may be either a string (str or bytes) or an int. If s is a string, it must match the leading substring of line you wish clipped. If s is an int, it should representing the number of characters you want clipped from the beginning of s.

Returns line with s clipped; also appends the clipped portion to self.leading, and updates self.column_number to represent the column number where line now starts. (If the clipped portion of line contains tabs, it's detabbed using lines.tab_width and the detab method on the clipped substring before it is measured.)

`LineInfo.clip_trailing(line, s)`

Clip the trailing substring s from line.

s may be either a string (str or bytes) or an int. If s is a string, it must match the trailing substring of line you wish clipped. If s is an int, it should representing the number of characters you want clipped from the end of s.

Returns line with s clipped; also appends the clipped portion to self.trailing.

`lines(s, separators=None, *, line_number=1, column_number=1, tab_width=8, **kwargs)`

A "lines iterator" object. Splits s into lines, and iterates yielding those lines.

When iterated over, yields 2-tuples:

     (info, line)

where info is a LineInfo object, and line is a str or bytes object.

s can be str, bytes, or an iterable.

If s is neither str nor bytes, s must be an iterable. The iterable should either yield individual strings, which is the line, or it should yield a tuple containing two strings, in which case the strings should be the line and the line-terminating newline respectively. All "string" objects yielded by this iterable should be homogeneous, either str or bytes.

separators should either be None or an iterable of separator strings, as per the separators argument to multisplit. If s is str or bytes, it will be split using multisplit, using these separators. If separators is None--which is the default value--and s is str or bytes, s will be split at linebreak characters. (If s is neither str nor bytes, separators must be None.)

line_number is the starting line number given to the first LineInfo object. This number is then incremented for every subsequent line.

column_number is the starting column number given to every LineInfo object. This number represents the leftmost column of every line.

tab_width isn't used by lines itself, but is stored internally and may be used by other lines modifier functions (e.g. lines_strip_indent, lines_convert_tabs_to_spaces). Similarly, all keyword arguments passed in via kwargs are stored internally and can be accessed by user-defined lines modifier functions.

You can pass in an instance of a subclass of bytes or str for s and elements of separators, but the base class for both must be the same (str or bytes). lines will only yield str or bytes objects for line.

Composable with all the lines_ modifier functions in the big.text module.

For more information, see the deep-dive on lines and lines modifier functions.

`lines_convert_tabs_to_spaces(li)`

A lines modifier function. Converts tabs to spaces for the lines of a "lines iterator", using the tab_width passed in to lines.

For more information, see the deep-dive on lines and lines modifier functions.

`lines_filter_empty_lines(li)`

A lines modifier function. Filters out the empty lines of a "lines iterator".

Preserves the line numbers. If lines 0 through 2 are empty, line 3 is 'a'``, line 4 is empty, and line 5 is 'b'``, this will yield:

    (LineInfo(line='a', line_number=3), 'a')
    (LineInfo(line='b', line_number=5), 'b')

For more information, see the deep-dive on lines and lines modifier functions.

`lines_filter_line_comment_lines(li, comment_markers)`

A lines modifier function. Filters out comment lines from the lines of a "lines iterator". Comment lines are lines whose first non-whitespace characters appear in the iterable of comment_separators strings passed in.

What's the difference between lines_strip_line_comments and lines_filter_line_comment_lines?

lines_filter_line_comment_lines only recognizes lines that start with a comment separator (ignoring leading whitespace). Also, it filters out those lines completely, rather than modifying the line.
lines_strip_line_comments handles comment markers anywhere in the line, and it can also ignore comments inside quoted strings. It truncates the line but still always yields the line.

For more information, see the deep-dive on lines and lines modifier functions.

`lines_containing(li, s, *, invert=False)`

A lines modifier function. Only yields lines that contain s. (Filters out lines that don't contain s.)

If invert is true, returns the opposite--filters out lines that contain s.

For more information, see the deep-dive on lines and lines modifier functions.

`lines_grep(li, pattern, *, invert=False, flags=0, match='match')`

A lines modifier function. Only yields lines that match the regular expression pattern. (Filters out lines that don't match pattern.) Stores the resulting re.Match object in info.match.

pattern can be str, bytes, or an re.Pattern object. If pattern is not an re.Pattern object, it's compiled with re.compile(pattern, flags=flags).

If invert is true, returns the opposite--filters out lines that match pattern.

The match parameter specifies the LineInfo attribute name to write to. By default it writes to info.match; you can specify any valid identifier, and it will instead write the re.Match object (or None) to the identifier you specify.

For more information, see the deep-dive on lines and lines modifier functions.

(In older versions of Python, re.Pattern was a private type called re._pattern_type.)

`lines_rstrip(li, separators=None)`

A lines modifier function. Strips trailing whitespace from the lines of a "lines iterator".

separators is an iterable of separators, like the argument to multistrip. The default value is None, which means lines_rstrip strips all trailing whitespace characters.

All characters removed are clipped to info.trailing as appropriate. If the line is non-empty before stripping, and empty after stripping, the entire line is clipped to info.trailing.

For more information, see the deep-dive on lines and lines modifier functions.

`lines_sort(li, *, key=None, reverse=False)`

A lines modifier function. Sorts all input lines before yielding them.

If key is specified, it's used as the key parameter to list.sort. The key function will be called with the (info, line)`` tuple yielded by the *lines iterator.* If keyis a false value,lines_sort` sorts the lines lexicographically, from lowest to highest.

If reverse is true, lines are sorted from highest to lowest.

For more information, see the deep-dive on lines and lines modifier functions.

`lines_strip(li, separators=None)`

A lines modifier function. Strips leading and trailing strings from the lines of a "lines iterator".

separators is an iterable of separators, like the argument to multistrip. The default value is None, which means lines_strip strips all leading and trailing whitespace characters.

All characters are clipped to info.leading and info.trailing as appropriate. If the line is non-empty before stripping, and empty after stripping, the entire line is clipped to info.trailing.

For more information, see the deep-dive on lines and lines modifier functions.

`lines_strip_indent(li)`

A lines modifier function. Strips leading whitespace and tracks the indent level.

The indent level is stored in the LineInfo object's attribute indent. indent is an integer, the ordinal number of the current indent; if the text has been indented three times, indent will be 3.

Strips any leading whitespace from the line, updating the LineInfo attributes leading and column_number as needed.

Uses an intentionally simple algorithm. Only understands tab and space characters as indent characters. Internally detabs to spaces first for consistency, using the tab_width passed in to lines.

You can only dedent out to a previous indent. Raises IndentationError if there's an illegal dedent.

For more information, see the deep-dive on lines and lines modifier functions.

`lines_strip_line_comments(li, line_comment_markers, *, quotes=(), escape='\\', multiline_quotes=())`

A lines modifier function. Strips comments from the lines of a "lines iterator". Comments are substrings that indicate the rest of the line should be ignored; lines_strip_line_comments truncates the line at the beginning of the leftmost comment separator.

line_comment_markers should be an iterable of line comment marker strings. These are strings that denote a "line comment", which is to say, a comment that starts at that marker and extends to the end of the line.

By default, quotes and multiline_quotes are both false, in which case lines_strip_line_comments will truncate each line, starting at the leftmost comment marker, and yield the resulting line. If the line doesn't contain any comment markers, lines_strip_line_comments will yield it unchanged.

However, the syntax of the text you're parsing might support quoted strings, and if so, comment marks in those quoted strings should be ignored. lines_strip_quoted_strings supports this too, with its escape, quotes, and multiline_quotes parameters.

If quotes is true, it must be an iterable of quote characters. lines_strip_line_comments will parse the line using big's split_quoted_strings function and ignore comment markers inside quoted strings. Quote marks must be balanced; if you open a quoted string, you must close it. If a line ends with an quoted string still open, lines_strip_line_comments will raise SyntaxError.

multiline_quotes is similar to quotes, except quoted strings are permitted to span lines. If the iterator stops iteration with a multiline quoted string still open, lines_strip_line_comments will raise SyntaxError.

escape specifies an escape string to allow having the closing quote marker inside a quoted string without closing ending the string. If false, there is no escape string.

What's the difference between lines_strip_line_comments and lines_filter_line_comment_lines?

lines_filter_line_comment_lines only recognizes lines that start with a comment separator (ignoring leading whitespace). Also, it filters out those lines completely, rather than modifying the line.
lines_strip_line_comments handles comment markers anywhere in the line, and it can even ignore comments inside quoted strings. It always yields the line, whether or not it's truncated the line.

For more information, see the deep-dive on lines and lines modifier functions.

`merge_columns(*columns, column_separator=" ", overflow_response=OverflowResponse.RAISE, overflow_before=0, overflow_after=0)`

Merge an arbitrary number of separate text strings into columns. Returns a single formatted string.

columns should be an iterable of "column tuples". Each column tuple should contain three items:

(text, min_width, max_width)

text should be a single string, either str or bytes, with newline characters separating lines. min_width and max_width are the minimum and maximum permissible widths for that column, not including the column separator (if any).

Note that this function does not text-wrap the text of the columns. The text in the columns should already be broken into lines and separated by newline characters. (Lines in that are longer than that column tuple's max_width are handled with the overflow_strategy, described below.)

column_separator is printed between every column.

overflow_strategy tells merge_columns how to handle a column with one or more lines that are wider than that column's max_width. The supported values are:

OverflowStrategy.RAISE: Raise an OverflowError. The default.
OverflowStrategy.INTRUDE_ALL: Intrude into all subsequent columns on all lines where the overflowed column is wider than its max_width.
OverflowStrategy.DELAY_ALL: Delay all columns after the overflowed column, not beginning any until after the last overflowed line in the overflowed column.

When overflow_strategy is INTRUDE_ALL or DELAY_ALL, and either overflow_before or overflow_after is nonzero, these specify the number of extra lines before or after the overflowed lines in a column.

For more information, see the deep-dive on Word wrapping and formatting.

`multipartition(s, separators, count=1, *, reverse=False, separate=True)`

Like str.partition, but supports partitioning based on multiple separator strings, and can partition more than once.

s can be either str or bytes.

separators should be an iterable of objects of the same type as s.

By default, if any of the strings in separators are found in s, returns a tuple of three strings: the portion of s leading up to the earliest separator, the separator, and the portion of s after that separator. Example:

multipartition('aXbYz', ('X', 'Y')) => ('a', 'X', 'bYz')

If none of the separators are found in the string, returns a tuple containing s unchanged followed by two empty strings.

multipartition is greedy: if two or more separators appear at the leftmost location in s, multipartition partitions using the longest matching separator. For example:

multipartition('wxabcyz', ('a', 'abc')) => `('wx', 'abc', 'yz')`

Passing in an explicit count lets you control how many times multipartition partitions the string. multipartition will always return a tuple containing (2*count)+1 elements. Passing in a count of 0 will always return a tuple containing s.

If separate is true, multiple adjacent separator strings behave like one separator. Example:

big.text.multipartition('aXYbYXc', ('X', 'Y',), count=2, separate=False) => ('a', 'XY', 'b', 'YX', 'c')
big.text.multipartition('aXYbYXc', ('X', 'Y',), count=2, separate=True ) => ('a', 'X', '', 'Y', 'bYXc')

If reverse is true, multipartition behaves like str.rpartition. It partitions starting on the right, scanning backwards through s looking for separators.

For more information, see the deep-dive on The multi- family of string functions.

`multisplit(s, separators=None, *, keep=False, maxsplit=-1, reverse=False, separate=False, strip=False)`

Splits strings like str.split, but with multiple separators and options.

s can be str or bytes.

separators should either be None (the default), or an iterable of str or bytes, matching s.

If separators is None and s is str, multisplit will use big.whitespace as separators. If separators is None and s is bytes, multisplit will use big.ascii_whitespace as separators.

Returns an iterator yielding the strings split from s. If keep is true (or ALTERNATING), and strip is false, joining these strings together will recreate s.

multisplit is greedy: if two or more separators start at the same location in s, multisplit splits using the longest matching separator. For example:

big.multisplit('wxabcyz', ('a', 'abc'))

yields 'wx' then 'yz'.

keep indicates whether or not multisplit should preserve the separator strings in the strings it yields. It supports four values:

false (the default): Discard the separators.
true (apart from ALTERNATING and AS_PAIRS): Append the separators to the end of the split strings. You can recreate the original string by using "".join to join the strings yielded by multisplit.
ALTERNATING: Yield alternating strings in the output: strings consisting of separators, alternating with strings consisting of non-separators. If "separate" is true, separator strings will contain exactly one separator, and non-separator strings may be empty; if "separate" is false, separator strings will contain one or more separators, and non-separator strings will never be empty, unless "s" was empty. You can recreate the original string by using "".join to join the strings yielded by multisplit.
AS_PAIRS: Yield 2-tuples containing a non-separator string and its subsequent separator string. Either string may be empty; the separator string in the last 2-tuple will always be empty, and if "s" ends with a separator string, both strings in the final 2-tuple will be empty.

separate indicates whether multisplit should consider adjacent separator strings in s as one separator or as multiple separators each separated by a zero-length string. It supports two values:

false (the default): Group separators together. Multiple adjacent separators behave as if they're one big separator.
true: Don't group separators together. Each separator should split the string individually, even if there are no characters between two separators. (multisplit will behave as if there's a zero-character-wide string between adjacent separators.)

strip indicates whether multisplit should strip separators from the beginning and/or end of s. It supports five values:

false (the default): Don't strip separators from the beginning or end of "s".
true (apart from LEFT, RIGHT, and PROGRESSIVE): Strip separators from the beginning and end of "s" (similarly to `str.strip`).
LEFT: Strip separators only from the beginning of "s" (similarly to `str.lstrip`).
RIGHT: Strip separators only from the end of "s" (similarly to `str.rstrip`).
PROGRESSIVE: Strip from the beginning and end of "s", unless "maxsplit" is nonzero and the entire string is not split. If splitting stops due to "maxsplit" before the entire string is split, and "reverse" is false, don't strip the end of the string. If splitting stops due to "maxsplit" before the entire string is split, and "reverse" is true, don't strip the beginning of the string. (This is how `str.strip` and `str.rstrip` behave when you pass in `sep=None`.)

maxsplit should be either an integer or None. If maxsplit is an integer greater than -1, multisplit will split text no more than maxsplit times.

reverse changes where multisplit starts splitting the string, and what direction it moves through the string when parsing.

false (the default): Start splitting from the beginning of the string and parse moving right (towards the end).
true: Start splitting from the end of the string and parse moving left (towards the beginning).

Splitting starting from the end of the string and parsing moving left has two effects. First, if maxsplit is a number greater than 0, the splits will start at the end of the string rather than the beginning. Second, if there are overlapping instances of separators in the string, multisplit will prefer the rightmost separator rather than the leftmost. Consider this example, where reverse is false:

multisplit("A x x Z", (" x ",), keep=big.ALTERNATING) => "A", " x ", "x Z"

If you pass in a true value for reverse, multisplit will prefer the rightmost overlapping separator:

multisplit("A x x Z", (" x ",), keep=big.ALTERNATING, reverse=True) => "A x", " x ", "Z"

For more information, see the deep-dive on The multi- family of string functions.

`multistrip(s, separators, left=True, right=True)`

Like str.strip, but supports stripping multiple substrings from s.

Strips from the string s all leading and trailing instances of strings found in separators.

s should be str or bytes.

separators should be an iterable of either str or bytes objects matching the type of s.

If left is a true value, strips all leading separators from s.

If right is a true value, strips all trailing separators from s.

Processing always stops at the first character that doesn't match one of the separators.

Returns a copy of s with the leading and/or trailing separators stripped. (If left and right are both false, returns s unchanged.)

For more information, see the deep-dive on The multi- family of string functions.

`normalize_whitespace(s, separators=None, replacement=None)`

Returns s, but with every run of consecutive separator characters turned into a replacement string. By default turns all runs of consecutive whitespace characters into a single space character.

s may be str or bytes.

separators should be an iterable of either str or bytes objects, matching s.

replacement should be either a str or bytes object, also matching s, or None (the default). If replacement is None, normalize_whitespace will use a replacement string consisting of a single space character.

Leading or trailing runs of separator characters will be replaced with the replacement string, e.g.:

normalize_whitespace("   a    b   c") == " a b c"

`re_partition(text, pattern, count=1, *, flags=0, reverse=False)`

Like str.partition, but pattern is matched as a regular expression.

text can be a string or a bytes object.

pattern can be a string, bytes, or re.Pattern object.

text and pattern (or pattern.pattern) must be the same type.

If pattern is found in text, returns a tuple

(before, match, after)

where before is the text before the matched text, match is the re.Match object resulting from the match, and after is the text after the matched text.

If pattern appears in text multiple times, re_partition will match against the first (leftmost) appearance.

If pattern is not found in text, returns a tuple

(text, None, '')

where the empty string is str or bytes as appropriate.

Passing in an explicit count lets you control how many times re_partition partitions the string. re_partition will always return a tuple containing (2*count)+1 elements, and odd-numbered elements will be either re.Match objects or None. Passing in a count of 0 will always return a tuple containing s.

If pattern is a string or bytes object, flags is passed in as the flags argument to re.compile.

If reverse is true, partitions starting at the right, like re_rpartition.

(In older versions of Python, re.Pattern was a private type called re._pattern_type.)

`re_rpartition(text, pattern, count=1, *, flags=0)`

Like str.rpartition, but pattern is matched as a regular expression.

text can be a str or bytes object.

pattern can be a str, bytes, or re.Pattern object.

text and pattern (or pattern.pattern) must be the same type.

If pattern is found in text, returns a tuple

(before, match, after)

where before is the text before the matched text, match is the re.Match object resulting from the match, and after is the text after the matched text.

If pattern appears in text multiple times, re_partition will match against the last (rightmost) appearance.

If pattern is not found in text, returns a tuple

('', None, text)

where the empty string is str or bytes as appropriate.

Passing in an explicit count lets you control how many times re_rpartition partitions the string. re_rpartition will always return a tuple containing (2*count)+1 elements, and odd-numbered elements will be either re.Match objects or None. Passing in a count of 0 will always return a tuple containing s.

If pattern is a string, flags is passed in as the flags argument to re.compile.

(In older versions of Python, re.Pattern was a private type called re._pattern_type.)

`reversed_re_finditer(pattern, string, flags=0)`

An iterator. Behaves almost identically to the Python standard library function re.finditer, yielding non-overlapping matches of pattern in string. The difference is, reversed_re_finditer searches string from right to left.

pattern can be str, bytes, or a precompiled re.Pattern object. If it's str or bytes, it'll be compiled with re.compile using the flags you passed in.

string should be the same type as pattern (or pattern.pattern).

`split_delimiters(s, delimiters={...}, *, state=())`

Splits a string s at delimiter substrings.

s may be str or bytes.

delimiters may be either None or a mapping of open delimiter strings to Delimiter objects. The open delimiter strings, close delimiter strings, and escape strings must match the type of s (either str or bytes).

If delimiters is None, split_delimiters uses a default value matching these pairs of delimiters:

    () [] {} "" ''

The first three delimiters allow multiline, disable quoting, and have no escape string. The quote mark delimiters enable quoting, disallow multiline, and specify their escape string as a single backslash. (This default value automatically supports both str and bytes.)

state specifies the initial state of parsing. It's an iterable of open delimiter strings specifying the initial nested state of the parser, with the innermost nesting level on the right. If you wanted split_delimiters to behave as if it'd already seen a '(' and a '[', in that order, pass in ['(', '['] to state.

(Tip: Use a list as a stack to track the state of split_delimiters. Push open delimiters with .append, and pop them with .pop when you encounter the matching close delimiter.)

Yields 3-tuples containing strings:

    (text, open, close)

where text is the text before the next opening or closing delimiter, open is the trailing opening delimiter, and close is the trailing closing delimiter. At least one of these three strings will always be non-empty. (If open is non-empty, close will be empty, and vice-versa.) If s doesn't end with an opening or closing delimiter, the final tuple yielded will have empty strings for both open and close.

You may not specify backslash ('\\') as an open delimiter.

Multiple Delimiters may use the same close delimiter string.

split_delimiters doesn't complain if the string ends with unterminated delimiters.

See the Delimiter object for how delimiters are defined, and how you can define your own delimiters.

`split_quoted_strings(s, quotes=('"', "'"), *, escape='\\', multiline_quotes=(), state='')`

Splits s into quoted and unquoted segments.

Returns an iterator yielding 3-tuples:

    (leading_quote, segment, trailing_quote)

where leading_quote and trailing_quote are either empty strings or quote delimiters from quotes, and segment is a substring of s. Joining together all strings yielded recreates s.

s can be either str or bytes.

quotes is an iterable of unique quote delimiters. Quote delimiters may be any non-empty string. They must be the same type as s, either str or bytes. By default, quotes is ('"', "'"). (If s is bytes, quotes defaults to (b'"', b"'").) If a newline character appears inside a quoted string, split_quoted_strings will raise SyntaxError.

multiline_quotes is like quotes, except quoted strings using multiline quotes are permitted to contain newlines. By default split_quoted_strings doesn't define any multiline quote marks.

escape is a string of any length. If escape is not an empty string, the string will "escape" (quote) quote delimiters inside a quoted string, like the backslash ('\') character inside strings in Python. By default, escape is '\\'. (If s is bytes, escape defaults to b'\\'.)

state is a string. It sets the initial state of the function. The default is an empty string (str or bytes, matching s); this means the parser starts parsing the string in an unquoted state. If you want parsing to start as if it had already encountered a quote delimiter--for example, if you were parsing multiple lines individually, and you wanted to begin a new line continuing the state from the previous line-- pass in the appropriate quote delimiter from quotes into state. Note that when a non-empty string is passed in to state, the leading_quote in the first 3-tuple yielded by split_quoted_strings will be an empty string:

    list(split_quoted_strings("a b c'", state="'"))

evaluates to

    [('', 'a b c', "'")]

Note:

split_quoted_strings is agnostic about the length of quoted strings. If you're using split_quoted_strings to parse a C-like language, and you want to enforce C's requirement that single-quoted strings only contain one character, you'll have to do that yourself.
split_quoted_strings doesn't raise an error if s ends with an unterminated quoted string. In that case, the last tuple yielded will have a non-empty leading_quote and an empty trailing_quote. (If you consider this an error, you'll need to raise SyntaxError in your own code.)
split_quoted_strings only supports the opening and closing markers for a string being the same string. If you need the opening and closing markers to be different strings, use split_delimiters.

`split_text_with_code(s, *, tab_width=8, allow_code=True, code_indent=4, convert_tabs_to_spaces=True)`

Splits s into individual words, suitable for feeding into wrap_words.

s may be either str or bytes.

Paragraphs indented by less than code_indent will be broken up into individual words.

If allow_code is true, paragraphs indented by at least code_indent spaces will preserve their whitespace: internal whitespace is preserved, and the newline is preserved. (This will preserve the formatting of code examples when these words are rejoined into lines by wrap_words.)

For more information, see the deep-dive on Word wrapping and formatting.

`split_title_case(s, *, split_allcaps=True)`

Splits s into words, assuming that upper-case characters start new words. Returns an iterator yielding the split words.

Example:

    list(split_title_case('ThisIsATitleCaseString'))

is equal to

    ['This', 'Is', 'A', 'Title', 'Case', 'String']

If split_allcaps is a true value (the default), runs of multiple uppercase characters will also be split before the last character. This is needed to handle splitting single-letter words. Consider:

    list(split_title_case('WhenIWasATeapot', split_allcaps=True))

returns

    ['When', 'I', 'Was', 'A', 'Teapot']

but

    list(split_title_case('WhenIWasATeapot', split_allcaps=False))

returns

    ['When', 'IWas', 'ATeapot']

Note: uses the isupper and islower methods to determine what are upper- and lower-case characters. This means it only recognizes the ASCII upper- and lower-case letters for bytes strings.

`str_linebreaks`

A tuple of str objects, representing every line-breaking whitespace character recognized by the Python str object. Identical to linebreaks.

Useful as a separator argument for big functions that accept one, e.g. the big "multi-" family of functions, or the lines and lines modifier functions.

Also contains '\r\n'. See the deep-dive section on The Unix, Mac, and DOS line-break conventions for more.

For more information, please see the Whitespace and line-breaking characters in Python and big deep-dive.

`str_linebreaks_without_crlf`

Equivalent to str_linebreaks without '\r\n'.

`str_whitespace`

A tuple of str objects, representing every whitespace character recognized by the Python str object. Identical to whitespace.

Useful as a separator argument for big functions that accept one, e.g. the big "multi-" family of functions, or the lines and lines modifier functions.

Also contains '\r\n'. See the deep-dive section on The Unix, Mac, and DOS line-break conventions for more.

For more information, please see the Whitespace and line-breaking characters in Python and big deep-dive.

`str_whitespace_without_crlf`

Equivalent to str_whitespace without '\r\n'.

`unicode_linebreaks`

A tuple of str objects, representing every line-breaking whitespace character defined by Unicode.

Useful as a separator argument for big functions that accept one, e.g. the big "multi-" family of functions, or the lines and lines modifier functions.

Also contains '\r\n'. See the deep-dive section on The Unix, Mac, and DOS line-break conventions for more.

For more information, please see the Whitespace and line-breaking characters in Python and big deep-dive.

`unicode_linebreaks_without_crlf`

Equivalent to unicode_linebreaks without '\r\n'.

`unicode_whitespace`

A tuple of str objects, representing every whitespace character defined by Unicode.

Useful as a separator argument for big functions that accept one, e.g. the big "multi-" family of functions, or the lines and lines modifier functions.

Also contains '\r\n'. See the deep-dive section on The Unix, Mac, and DOS line-break conventions for more.

For more information, please see the Whitespace and line-breaking characters in Python and big deep-dive.

`unicode_whitespace_without_crlf`

Equivalent to unicode_whitespace without '\r\n'.

`whitespace`

A tuple of str objects, representing every whitespace character recognized by the Python str object. Identical to str_whitespace.

Useful as a separator argument for big functions that accept one, e.g. the big "multi-" family of functions, or the lines and lines modifier functions.

Also contains '\r\n'. See the deep-dive section on The Unix, Mac, and DOS line-break conventions for more.

For more information, please see the Whitespace and line-breaking characters in Python and big deep-dive.

`whitespace_without_crlf`

Equivalent to whitespace without '\r\n'.

`wrap_words(words, margin=79, *, two_spaces=True)`

Combines words into lines and returns the result as a string. Similar to textwrap.wrap.

words should be an iterator yielding str or bytes strings, and these strings should already be split at word boundaries. Here's an example of a valid argument for words:

"this is an example of text split at word boundaries".split()

A single '\n' indicates a line break. If you want a paragraph break, embed two '\n' characters in a row.

margin specifies the maximum length of each line. The length of every line will be less than or equal to margin, unless the length of an individual element inside words is greater than margin.

If two_spaces is true, elements from words that end in sentence-ending punctuation ('.', '?', and '!') will be followed by two spaces, not one.

Elements in words are not modified; any leading or trailing whitespace will be preserved. You can use this to preserve whitespace where necessary, like in code examples.

For more information, see the deep-dive on Word wrapping and formatting.

`big.time`

Functions for working with time. Currently deals specifically with timestamps. The time functions in big are designed to make it easy to use best practices.

`date_ensure_timezone(d, timezone)`

Ensures that a datetime.date object has a timezone set.

If d has a timezone set, returns d. Otherwise, returns a new datetime.date object equivalent to d with its tzinfo set to timezone.

`date_set_timezone(d, timezone)`

Returns a new datetime.date object identical to d but with its tzinfo set to timezone.

`datetime_ensure_timezone(d, timezone)`

Ensures that a datetime.datetime object has a timezone set.

If d has a timezone set, returns d. Otherwise, creates a new datetime.datetime object equivalent to d with its tzinfo set to timezone.

`datetime_set_timezone(d, timezone)`

Returns a new datetime.datetime object identical to d but with its tzinfo set to timezone.

`parse_timestamp_3339Z(s, *, timezone=None)`

Parses a timestamp string returned by timestamp_3339Z. Returns a datetime.datetime object.

timezone is an optional default timezone, and should be a datetime.tzinfo object (or None). If provided, and the time represented in the string doesn't specify a timezone, the tzinfo attribute of the returned object will be explicitly set to timezone.

parse_timestamp_3339Z depends on the python-dateutil package. If python-dateutil is unavailable, parse_timestamp_3339Z will also be unavailable.

`timestamp_3339Z(t=None, want_microseconds=None)`

Return a timestamp string in RFC 3339 format, in the UTC time zone. This format is intended for computer-parsable timestamps; for human-readable timestamps, use timestamp_human().

Example timestamp: '2021-05-25T06:46:35.425327Z'

t may be one of several types:

If t is None, timestamp_3339Z uses the current time in UTC.
If t is an int or a float, it's interpreted as seconds since the epoch in the UTC time zone.
If t is a time.struct_time object or datetime.datetime object, and it's not in UTC, it's converted to UTC. (Technically, time.struct_time objects are converted to GMT, using time.gmtime. Sorry, pedants!)

If want_microseconds is true, the timestamp ends with microseconds, represented as a period and six digits between the seconds and the 'Z'. If want_microseconds is false, the timestamp will not include this text. If want_microseconds is None (the default), the timestamp ends with microseconds if the type of t can represent fractional seconds: a float, a datetime object, or the value None.

`timestamp_human(t=None, want_microseconds=None)`

Return a timestamp string formatted in a pleasing way using the currently-set local timezone. This format is intended for human readability; for computer-parsable time, use timestamp_3339Z().

Example timestamp: "2021/05/24 23:42:49.099437"

t can be one of several types:

If t is None, timestamp_human uses the current local time.
If t is an int or float, it's interpreted as seconds since the epoch.
If t is a time.struct_time or datetime.datetime object, it's converted to the local timezone.

If want_microseconds is true, the timestamp will end with the microseconds, represented as ".######". If want_microseconds is false, the timestamp will not include the microseconds.

If want_microseconds is None (the default), the timestamp ends with microseconds if the type of t can represent fractional seconds: a float, a datetime object, or the value None.

`big.version`

Support for version metadata objects.

`Version(s=None, *, epoch=None, release=None, release_level=None, serial=None, post=None, dev=None, local=None)`

Constructs a Version object, which represents a version number.

You may define the version one of two ways:

by passing in a version string to the s positional parameter. Example: Version("1.3.24rc37")
by passing in keyword-only arguments setting the specific fields of the version. Example: Version(release=(1, 3, 24), release_level="rc", serial=37)

big's Version objects conform to the PEP 440 version scheme, parsing version strings using that PEP's official regular expression.

Version objects support the following features:

They're immutable once constructed.
They support the following read-only properties:
- epoch
- release
- major (release[0])
- minor (a safe version of release[1])
- micro (a safe version of release[2])
- release_level
- serial
- post
- dev
- local
Version objects are hashable.
Version objects support ordering and comparison; you can ask if two Version objects are equal, or if one is less than the other.
str() on a Version object returns a normalized version string for that version. repr() on a Version object returns a string that, if eval'd, reconstructs that object.
Version objects normalize themselves at initialization time:
- Leading zeroes on version numbers are stripped.
- Trailing zeroes in release (and trailing .0 strings in the equivalent part of a version string) are stripped.
- Abbreviations and alternate names for release_level are normalized.
Don't tell anybody, but, you can also pass a sys.version_info object into the constructor instead of a version string.

When constructing a Version by passing in a string s, the string must conform to this scheme, where square brackets denote optional substrings and names in angle brackets represent parameterized substrings:

[<epoch>!]<major>(.<minor_etc>)*[<release_level>[<serial>]][.post<post>][.dev<dev>][+<local>]

All fields should be non-negative integers except for:

<major>(.<minor_etc>)* is meant to connote a conventional dotted version number, like 1.2 or 1.5.3.8. This section can contain only numeric digits and periods ('.'). You may have as few or as many periods as you prefer. Trailing .0 entries will be stripped.
<release_level> can only be be one of the following strings:
- a, meaning an alpha release,
- b, meaning a beta release, or
- rc, meaning a release candidate. For a final release, skip the release_level (and the serial).
<local> represents an arbitrary sequence of alphanumeric characters punctuated by periods.

Alternatively, you can construct a Version object by passing in these keyword-only arguments:

epoch

A non-negative int or None. Represents an "epoch" of version numbers. A version number with a higher "epoch" is always a later release, regardless of all other fields.

release

A tuple containing one or more non-negative integers. Represents the conventional part of the version number; the version string 1.3.8 would translate to Version(release=(1, 3, 8)).

release_level

A str or None. If it's a str, it must be one of the following strings:

a, meaning an alpha release,
b, meaning a beta release, or
rc, meaning a release candidate.

serial

A non-negative int or None. Represents how many releases there have been at this release_level. (The name is taken from Python's sys.version_info.)

post

A non-negative int or None. Represents "post-releases", extremely minor releases made after a release:

Version(release=(1, 3, 5)) < Version(release=(1, 3, 5), post=1)

dev

A non-negative int or None. Represents an under-development release. Higher dev numbers represent later releases, but any release where dev is not None comes before any release where dev is None. In other words:

Version(release=(1, 3, 5), dev=34) < Version(release=(1, 3, 5), dev=35)
Version(release=(1, 3, 5), dev=35) < Version(release=(1, 3, 5))

local

A tuple of one or more str objects containing only one or more alphanumeric characters or None. Represents a purely local version number, allowing for minor build and patch differences but with no API or ABI changes.

Topic deep-dives

The `multi-` family of string functions

This family of string functions was inspired by Python's str.split, str.rsplit, and str.splitlines methods. These string splitting methods are well-designed and often do what you want. But they're surprisingly narrow and opinionated. What if your use case doesn't map neatly to one of these functions? str.split supports two very specific modes of operation--unless you want to split your string in exactly one of those two modes, you probably can't use str.split to solve your problem.

So what can you use? There's re.split, but that can be hard to use.¹ Regular expressions can be so hard to get right, and the semantics of re.split are subtly different from the usual string splitting functions. Not to mention, it doesn't support reverse!

Now there's a new answer: multisplit. The goal of multisplit is to be the be-all end-all string splitting function. It's designed to supercede every mode of operation provided by str.split, str.rsplit, and str.splitlines, and it can even replace str.partition and str.rpartition too. multisplit does it all!

The downside of multisplit's awesome flexibility is that it can be hard to use... after all, it takes five keyword-only parameters. However, these parameters and their defaults are designed to be easy to remember.

The best way to cope with multisplit's complexity is to use it as a building block for your own text splitting functions. For example, big uses multisplit to implement multipartition, normalize_whitespace, lines, and several other functions.

Using `multisplit`

To use multisplit, pass in the string you want to split, the separators you want to split on, and tweak its behavior with its five keyword arguments. It returns an iterator that yields string segments from the original string in your preferred format. The separator list is optional; if you don't pass one in, it defaults to an iterable of whitespace separators (either big.whitespace or big.ascii_whitespace, as appropriate).

The cornerstone of multisplit is the separators argument. This is an iterable of strings, of the same type (str or bytes) as the string you want to split (s). multisplit will split the string at each non-overlapping instance of any string specified in separators.

multisplit lets you fine-tune its behavior via five keyword-only parameters:

keep lets you include the separator strings in the output, in a number of different formats.
separate lets you specify whether adjacent separator strings should be grouped together (like str.split operating on whitespace) or regarded as separate (like str.split when you pass in an explicit separator).
strip lets you strip separator strings from the beginning, end, or both ends of the string you're splitting. It also supports a special progressive mode that duplicates the behavior of str.split when you use None as the separator.
maxsplit lets you specify the maximum number of times to split the string, exactly like the maxsplit argument to str.split.
reverse makes multisplit behave like str.rsplit, starting at the end of the string and working backwards. (This only changes the behavior of multisplit if you use maxsplit, or if your string contains overlapping separators.)

To make it slightly easier to remember, all these keyword-only parameters default to a false value. (Well, technically, maxsplit defaults to the special value -1, for compatibility with str.split. But that's its special "don't do anything" magic value. All the other keyword-only parameters default to False.)

multisplit also inspired multistrip and multipartition, which also take this same separators arguments. There are also other big functions that take a separators argument, for example comment_markers for lines_filter_line_comment_lines.)

Demonstrations of each `multisplit` keyword-only parameter

To give you a sense of how the five keyword-only parameters changes the behavior of multisplit, here's a breakdown of each of these parameters with examples.

`maxsplit`

maxsplit specifies the maximum number of times the string should be split. It behaves the same as the maxsplit parameter to str.split.

The default value of -1 means "split as many times as you can". In our example here, the string can be split a maximum of three times. Therefore, specifying a maxsplit of -1 is equivalent to specifying a maxsplit of 2 or greater:

    >>> list(big.multisplit('appleXbananaYcookie', ('X', 'Y'))) # "maxsplit" defaults to -1
    ['apple', 'banana', 'cookie']
    >>> list(big.multisplit('appleXbananaYcookie', ('X', 'Y'), maxsplit=0))
    ['appleXbananaYcookie']
    >>> list(big.multisplit('appleXbananaYcookie', ('X', 'Y'), maxsplit=1))
    ['apple', 'bananaYcookie']
    >>> list(big.multisplit('appleXbananaYcookie', ('X', 'Y'), maxsplit=2))
    ['apple', 'banana', 'cookie']
    >>> list(big.multisplit('appleXbananaYcookie', ('X', 'Y'), maxsplit=3))
    ['apple', 'banana', 'cookie']

maxsplit has interactions with reverse and strip. For more information, see the documentation regarding those parameters below.

`keep`

keep indicates whether or not multisplit should preserve the separator strings in the strings it yields. It supports four values: false, true, and the special values ALTERNATING and AS_PAIRS.

When keep is false, multisplit throws away the separator strings; they won't appear in the output.

    >>> list(big.multisplit('appleXbananaYcookie', ('X', 'Y'))) # "keep" defaults to False
    ['apple', 'banana', 'cookie']
    >>> list(big.multisplit('appleXbananaYcookie', ('X', 'Y'), keep=False))
    ['apple', 'banana', 'cookie']

When keep is true, multisplit keeps the separators, appending them to the end of the separated string:

    >>> list(big.multisplit('appleXbananaYcookie', ('X', 'Y'), keep=True))
    ['appleX', 'bananaY', 'cookie']

When keep is ALTERNATING, multisplit keeps the separators as separate strings. The first string yielded is always a non-separator string, and from then on it always alternates between a separator string and a non-separator string. Put another way, if you store the output of multisplit in a list, entries with an even-numbered index (0, 2, 4, ...) are always non-separator strings, and entries with an odd-numbered index (1, 3, 5, ...) are always separator strings.

    >>> list(big.multisplit('appleXbananaYcookie', ('X', 'Y'), keep=big.ALTERNATING))
    ['apple', 'X', 'banana', 'Y', 'cookie']

Note that ALTERNATING always emits an odd number of strings, and the first and last strings yielded are always non-separator strings. Like str.split, if the string you're splitting starts or ends with a separator string, multisplit will emit an empty string at the beginning or end, to preserve the "always begin and end with non-separator string" invariant:

    >>> list(big.multisplit('1a1z1', ('1',), keep=big.ALTERNATING))
    ['', '1', 'a', '1', 'z', '1', '']

Finally, when keep is AS_PAIRS, multisplit keeps the separators as separate strings. But it doesn't yield bare strings; instead, it yields 2-tuples of strings. Every 2-tuple contains a non-separator string followed by a separator string.

If the original string starts with a separator, the first 2-tuple will contain an empty non-separator string and the separator:

    >>> list(big.multisplit('YappleXbananaYcookie', ('X', 'Y'), keep=big.AS_PAIRS))
    [('', 'Y'), ('apple', 'X'), ('banana', 'Y'), ('cookie', '')]

The last 2-tuple will always contain an empty separator string:

    >>> list(big.multisplit('appleXbananaYcookie', ('X', 'Y'), keep=big.AS_PAIRS))
    [('apple', 'X'), ('banana', 'Y'), ('cookie', '')]
    >>> list(big.multisplit('appleXbananaYcookieXXX', ('X', 'Y'), keep=big.AS_PAIRS, strip=True))
    [('apple', 'X'), ('banana', 'Y'), ('cookie', '')]

(This rule means that AS_PAIRS always emits an even number of strings. Contrast that with ALTERNATING, which always emits an odd number of strings, and the last string it emits is always a non-separator string. Put another way: if you ignore the tuples, the list of strings emitted by AS_PAIRS is the same as those emitted by ALTERNATING, except AS_PAIRS appends an empty string.)

Because of this rule, if the original string ends with a separator, and multisplit doesn't strip the right side, the final tuple emitted by AS_PAIRS will be a 2-tuple containing two empty strings:

    >>> list(big.multisplit('appleXbananaYcookieX', ('X', 'Y'), keep=big.AS_PAIRS))
    [('apple', 'X'), ('banana', 'Y'), ('cookie', 'X'), ('', '')]

This looks strange and unnecessary. But it is what you want. This odd-looking behavior is discussed at length in the section below, titled Why do you sometimes get empty strings when you split?

The behavior of keep can be affected by the value of separate. For more information, see the next section, on separate.

`separate`

separate indicates whether multisplit should consider adjacent separator strings in s as one separator or as multiple separators each separated by a zero-length string. It can be either false or true.

    >>> list(big.multisplit('appleXYbananaYXYcookie', ('X', 'Y'))) # separate defaults to False
    ['apple', 'banana', 'cookie']
    >>> list(big.multisplit('appleXYbananaYXYcookie', ('X', 'Y'), separate=False))
    ['apple', 'banana', 'cookie']
    >>> list(big.multisplit('appleXYbananaYXYcookie', ('X', 'Y'), separate=True))
    ['apple', '', 'banana', '', '', 'cookie']

If separate and keep are both true values, and your string has multiple adjacent separators, multisplit will view s as having zero-length non-separator strings between the adjacent separators:

    >>> list(big.multisplit('appleXYbananaYXYcookie', ('X', 'Y'), separate=True, keep=True))
    ['appleX', 'Y', 'bananaY', 'X', 'Y', 'cookie']

    >>> list(big.multisplit('appleXYbananaYXYcookie', ('X', 'Y'), separate=True, keep=big.AS_PAIRS))
    [('apple', 'X'), ('', 'Y'), ('banana', 'Y'), ('', 'X'), ('', 'Y'), ('cookie', '')]

`strip`

strip indicates whether multisplit should strip separators from the beginning and/or end of s. It supports five values: false, true, big.LEFT, big.RIGHT, and big.PROGRESSIVE.

By default, strip is false, which means it doesn't strip any leading or trailing separators:

    >>> list(big.multisplit('XYappleXbananaYcookieYXY', ('X', 'Y'))) # strip defaults to False
    ['', 'apple', 'banana', 'cookie', '']

Setting strip to true strips both leading and trailing separators:

    >>> list(big.multisplit('XYappleXbananaYcookieYXY', ('X', 'Y'), strip=True))
    ['apple', 'banana', 'cookie']

big.LEFT and big.RIGHT tell multistrip to only strip on that side of the string:

    >>> list(big.multisplit('XYappleXbananaYcookieYXY', ('X', 'Y'), strip=big.LEFT))
    ['apple', 'banana', 'cookie', '']
    >>> list(big.multisplit('XYappleXbananaYcookieYXY', ('X', 'Y'), strip=big.RIGHT))
    ['', 'apple', 'banana', 'cookie']

big.PROGRESSIVE duplicates a specific behavior of str.split when using maxsplit. It always strips on the left, but it only strips on the right if the string is completely split. If maxsplit is reached before the entire string is split, and strip is big.PROGRESSIVE, multisplit won't strip the right side of the string. Note in this example how the trailing separator Y isn't stripped from the input string when maxsplit is less than 3.

    >>> list(big.multisplit('XappleXbananaYcookieY', ('X', 'Y'), strip=big.PROGRESSIVE))
    ['apple', 'banana', 'cookie']
    >>> list(big.multisplit('XappleXbananaYcookieY', ('X', 'Y'), maxsplit=0, strip=big.PROGRESSIVE))
    ['appleXbananaYcookieY']
    >>> list(big.multisplit('XappleXbananaYcookieY', ('X', 'Y'), maxsplit=1, strip=big.PROGRESSIVE))
    ['apple', 'bananaYcookieY']
    >>> list(big.multisplit('XappleXbananaYcookieY', ('X', 'Y'), maxsplit=2, strip=big.PROGRESSIVE))
    ['apple', 'banana', 'cookieY']
    >>> list(big.multisplit('XappleXbananaYcookieY', ('X', 'Y'), maxsplit=3, strip=big.PROGRESSIVE))
    ['apple', 'banana', 'cookie']
    >>> list(big.multisplit('XappleXbananaYcookieY', ('X', 'Y'), maxsplit=4, strip=big.PROGRESSIVE))
    ['apple', 'banana', 'cookie']

`reverse`

reverse specifies where multisplit starts parsing the string--from the beginning, or the end--and in what direction it moves when parsing the string--towards the end, or towards the beginning. It only supports two values: when it's false, multisplit starts at the beginning of the string, and parses moving to the right (towards the end of the string). But when reverse is true, multisplit starts at the end of the string, and parses moving to the left (towards the beginning of the string).

This has two noticable effects on multisplit's output. First, this changes which splits are kept when maxsplit is less than the total number of splits in the string. When reverse is true, the splits are counted starting on the right and moving towards the left:

    >>> list(big.multisplit('appleXbananaYcookie', ('X', 'Y'), reverse=True)) # maxsplit defaults to -1
    ['apple', 'banana', 'cookie']
    >>> list(big.multisplit('appleXbananaYcookie', ('X', 'Y'), maxsplit=0, reverse=True))
    ['appleXbananaYcookie']
    >>> list(big.multisplit('appleXbananaYcookie', ('X', 'Y'), maxsplit=1, reverse=True))
    ['appleXbanana', 'cookie']
    >>> list(big.multisplit('appleXbananaYcookie', ('X', 'Y'), maxsplit=2, reverse=True))
    ['apple', 'banana', 'cookie']
    >>> list(big.multisplit('appleXbananaYcookie', ('X', 'Y'), maxsplit=3, reverse=True))
    ['apple', 'banana', 'cookie']

The second effect is far more subtle. It's only relevant when splitting strings containing multiple overlapping separators. When reverse is false, and there are two (or more) overlapping separators, the string is split by the leftmost overlapping separator. When reverse is true, and there are two (or more) overlapping separators, the string is split by the rightmost overlapping separator.

Consider these two calls to multisplit. The only difference between them is the value of reverse. They produce different results, even though neither one uses maxsplit.

    >>> list(big.multisplit('appleXAYbananaXAYcookie', ('XA', 'AY'))) # reverse defaults to False
    ['apple', 'Ybanana', 'Ycookie']
    >>> list(big.multisplit('appleXAYbananaXAYcookie', ('XA', 'AY'), reverse=True))
    ['appleX', 'bananaX', 'cookie']

Reimplementing library functions using `multisplit`

Here are some examples of how you could use multisplit to replace some common Python string splitting methods. These exactly duplicate the behavior of the originals.

def _multisplit_to_split(s, sep, maxsplit, reverse):
    separate = sep != None
    if separate:
        strip = False
    else:
        sep = big.ascii_whitespace if isinstance(s, bytes) else big.whitespace
        strip = big.PROGRESSIVE
    result = list(big.multisplit(s, sep,
        maxsplit=maxsplit, reverse=reverse,
        separate=separate, strip=strip))
    if not separate:
        # ''.split() == '   '.split() == []
        if result and (not result[-1]):
            result.pop()
    return result

def str_split(s, sep=None, maxsplit=-1):
    return _multisplit_to_split(s, sep, maxsplit, False)

def str_rsplit(s, sep=None, maxsplit=-1):
    return _multisplit_to_split(s, sep, maxsplit, True)

def str_splitlines(s, keepends=False):
    linebreaks = big.ascii_linebreaks if isinstance(s, bytes) else big.linebreaks
    l = list(big.multisplit(s, linebreaks,
        keep=keepends, separate=True, strip=False))
    if l and not l[-1]:
    	# yes, ''.splitlines() returns an empty list
        l.pop()
    return l

def _partition_to_multisplit(s, sep, reverse):
    if not sep:
        raise ValueError("empty separator")
    l = tuple(big.multisplit(s, (sep,),
        keep=big.ALTERNATING, maxsplit=1, reverse=reverse, separate=True))
    if len(l) == 1:
        empty = b'' if isinstance(s, bytes) else ''
        if reverse:
            l = (empty, empty) + l
        else:
            l = l + (empty, empty)
    return l

def str_partition(s, sep):
    return _partition_to_multisplit(s, sep, False)

def str_rpartition(s, sep):
    return _partition_to_multisplit(s, sep, True)

You wouldn't want to use these, of course--Python's built-in functions are so much faster!

Why do you sometimes get empty strings when you split?

Sometimes when you split using multisplit, you'll get empty strings in the return value. This might be unexpected, violating the Principle Of Least Astonishment. But there are excellent reasons for this behavior.

Let's start by observing what str.split does. str.split really has two major modes of operation: when you don't pass in a separator (or pass in None for the separator), and when you pass in an explicit separator string. In this latter mode, the documentation says it regards every instance of a separator string as an individual separator splitting the string. What does that mean? Watch what happens when you have two adjacent separators in the string you're splitting:

    >>> '1,2,,3'.split(',')
    ['1', '2', '', '3']

What's that empty string doing between '2' and '3'? Here's how you should think about it: when you pass in an explicit separator, str.split splits at every occurance of that separator in the string. It always splits the string into two places, whenever there's a separator. And when there are two adjacent separators, conceptually, they have a zero-length string in between them:

    >>> '1,2,,3'[4:4]
    ''

The empty string in the output of str.split represents the fact that there were two adjacent separators. If str.split didn't add that empty string, the output would look like this:

    ['1', '2', '3']

But then it'd be indistinguishable from splitting the same string without two separators in a row:

    >>> '1,2,3'.split(',')
    ['1', '2', '3']

This difference is crucial when you want to reconstruct the original string from the split list. str.split with a separator should always be reversable using str.join, and with that empty string there it works correctly:

    >>> ','.join(['1', '2', '3'])
    '1,2,3'
    >>> ','.join(['1', '2', '', '3'])
    '1,2,,3'

Now take a look at what happens when the string you're splitting starts or ends with a separator:

    >>> ',1,2,3,'.split(',')
    ['', '1', '2', '3', '']

This might seem weird. But, just like with two adjacent separators, this behavior is important for consistency. Conceptually there's a zero-length string between the beginning of the string and the first comma. And str.join needs those empty strings in order to correctly recreate the original string.

    >>> ','.join(['', '1', '2', '3', ''])
    ',1,2,3,'

Naturally, multisplit lets you duplicate this behavior. When you want multisplit to behave just like str.split does with an explicit separator string, just pass in keep=False, separate=True, and strip=False. That is, if a and b are strings,

     big.multisplit(a, (b,), keep=False, separate=True, strip=False)

always produces the same output as

     a.split(b)

For example, here's multisplit splitting the strings we've been playing with, using these parameters:

    >>> list(big.multisplit('1,2,,3', (',',), keep=False, separate=True, strip=False))
    ['1', '2', '', '3']
    >>> list(big.multisplit(',1,2,3,', (',',), keep=False, separate=True, strip=False))
    ['', '1', '2', '3', '']

This "emit an empty string" behavior also has ramifications when keep isn't false. The behavior of keep=True is easy to predict; multisplit just appends the separators to the previous string segment:

    >>> list(big.multisplit('1,2,,3', (',',), keep=True, separate=True, strip=False))
    ['1,', '2,', ',', '3']
    >>> list(big.multisplit(',1,2,3,', (',',), keep=True, separate=True, strip=False))
    [',', '1,', '2,', '3,', '']

The principle here is that, when you use keep=True, you should be able to reconstitute the original string with ''.join:

    >>> ''.join(['1,', '2,', ',', '3'])
    '1,2,,3'
    >>> ''.join([',', '1,', '2,', '3,', ''])
    ',1,2,3,'

keep=big.ALTERNATING is much the same, except we insert the separators as their own segments, rather than appending each one to the previous segment:

    >>> list(big.multisplit('1,2,,3', (',',), keep=big.ALTERNATING, separate=True, strip=False))
    ['1', ',', '2', ',', '', ',', '3']
    >>> list(big.multisplit(',1,2,3,', (',',), keep=big.ALTERNATING, separate=True, strip=False))
    ['', ',', '1', ',', '2', ',', '3', ',', '']

Remember, ALTERNATING output always begins and ends with a non-separator string. If the string you're splitting begins or ends with a separator, the output from multisplit specifying keep=ALTERNATING will correspondingly begin or end with an empty string.

And, as with keep=True, you can also recreate the original string by passing these arrays in to ''.join:

    >>> ''.join(['1', ',', '2', ',', '', ',', '3'])
    '1,2,,3'
    >>> ''.join(['', ',', '1', ',', '2', ',', '3', ',', ''])
    ',1,2,3,'

Finally there's keep=big.AS_PAIRS. The behavior here seemed so strange, initially I thought it was wrong. But I've given it a lot of thought, and I've convinced myself that this is correct:

    >>> list(big.multisplit('1,2,,3', (',',), keep=big.AS_PAIRS, separate=True, strip=False))
    [('1', ','), ('2', ','), ('', ','), ('3', '')]
    >>> list(big.multisplit(',1,2,3,', (',',), keep=big.AS_PAIRS, separate=True, strip=False))
    [('', ','), ('1', ','), ('2', ','), ('3', ','), ('', '')]

That tuple at the end, just containing two empty strings:

    ('', '')

It's so strange. How can that be right?

In short, it's similar to the str.split situation. When called with keep=AS_PAIRS, multisplit guarantees that the final tuple will contain an empty separator string. If the string you're splitting ends with a separator, it must emit the empty non-separator string, followed by the empty separator string.

Think of it this way: with the tuple of empty strings there, you can easily convert one keep format into any another. (Provided that you know what the separators were--either the source keep format was not false, or you only used one separator string when calling multisplit). Without that tuple of empty strings at the end, you'd also have to have an if statement to add or remove empty stuff from the end.

I'll demonstrate this with a simple example. Here's the output of multisplit splitting the string '1a1z1' by the separator '1', in each of the four keep formats:

>>> list(big.multisplit('1a1z1', '1', keep=False))
['', 'a', 'z', '']
>>> list(big.multisplit('1a1z1', '1', keep=True))
['1', 'a1', 'z1', '']
>>> list(big.multisplit('1a1z1', '1', keep=big.ALTERNATING))
['', '1', 'a', '1', 'z', '1', '']
>>> list(big.multisplit('1a1z1', '1', keep=big.AS_PAIRS))
[('', '1'), ('a', '1'), ('z', '1'), ('', '')]

Because the AS_PAIRS output ends with that tuple of empty strings, we can mechanically convert it into any of the other formats, like so:

>>> result = list(big.multisplit('1a1z1', '1', keep=big.AS_PAIRS))
>>> result
[('', '1'), ('a', '1'), ('z', '1'), ('', '')]
>>> [s[0] for s in result] # convert to keep=False
['', 'a', 'z', '']
>>> [s[0]+s[1] for s in result] # convert to keep=True
['1', 'a1', 'z1', '']
>>> [s for t in result for s in t][:-1] # convert to keep=big.ALTERNATING
['', '1', 'a', '1', 'z', '1', '']

If the AS_PAIRS output didn't end with that tuple of empty strings, you'd need to add an if statement to restore the trailing empty strings as needed.

Other differences between multisplit and str.split

str.split returns an empty list when you split an empty string by whitespace:

>>> ''.split()
[]

But not when you split by an explicit separator:

>>> ''.split('x')
['']

multisplit is consistent here. If you split an empty string, it always returns an empty string, as long as the separators are valid:

>>> list(big.multisplit(''))
['']
>>> list(big.multisplit('', ('a', 'b', 'c')))
['']

Similarly, when splitting a string that only contains whitespace, str.split also returns an empty list:

>>> '     '.split()
[]

This is really the same as "splitting an empty string", because when str.split splits on whitespace, the first thing it does is strip leading whitespace.

If you multisplit a string that only contains whitespace, and you split on whitespace characters, it returns two empty strings:

>>> list(big.multisplit('     '))
['', '']

This is because the string conceptually starts with a zero-length string, then has a run of whitespace characters, then ends with another zero-length string. So those two empty strings are the leading and trailing zero-length strings, separated by whitespace. If you tell multisplit to also strip the string, you'll get back a single empty string:

>>> list(big.multisplit('     ', strip=True))
['']

And multisplit behaves consistently even when you use different separators:

>>> list(big.multisplit('ababa', 'ab'))
['', '']
>>> list(big.multisplit('ababa', 'ab', strip=True))
['']

And I should know--multisplit is implemented using re.split!

Whitespace and line-breaking characters in Python and big

Overview

Several functions in big take a separators argument, an iterable of separator strings. Examples of these functions include lines and multisplit. Although you can use any iterable of strings you like, most often you'll be separating on some form of whitespace. But what, exactly, is whitespace? There's more to this topic than you might suspect.

The good news is, you can almost certainly ignore all the complexity. These days the only whitespace characters you're likely to encounter are spaces, tabs, newlines, and maybe carriage returns. Python and big handle all those easily.

With respect to big and these separators arguments, big provides four values designed for use as separators. All four of these are tuples containing whitespace characters:

When working with str objects, you'll want to use either big.whitespace or big.linebreaks. big.whitespace contains all the whitespace characters, big.linebreaks contains just the line-breaking whitespace characters.
big also has equivalents for working with bytes objects: bytes_whitespace and bytes_linebreaks, respectively.

Apart from exceptionally rare occasions, these are all you'll ever need. And if that's all you need, you can stop reading this section now.

But what about those exceptionally rare occasions? You'll be pleased to know big handles them too. The rest of this section is a deep dive into these rare occasions.

Python

Here's the list of all characters recognized by Python str objects as whitespace characters:

# char    decimal   hex      name
##########################################
'\t'    , #     9 - 0x0009 - tab
'\n'    , #    10 - 0x000a - newline
'\v'    , #    11 - 0x000b - vertical tab
'\f'    , #    12 - 0x000c - form feed
'\r'    , #    13 - 0x000d - carriage return
'\x1c'  , #    28 - 0x001c - file separator
'\x1d'  , #    29 - 0x001d - group separator
'\x1e'  , #    30 - 0x001e - record separator
'\x1f'  , #    31 - 0x001f - unit separator
' '     , #    32 - 0x0020 - space
'\x85'  , #   133 - 0x0085 - next line
'\xa0'  , #   160 - 0x00a0 - non-breaking space
'\u1680', #  5760 - 0x1680 - ogham space mark
'\u2000', #  8192 - 0x2000 - en quad
'\u2001', #  8193 - 0x2001 - em quad
'\u2002', #  8194 - 0x2002 - en space
'\u2003', #  8195 - 0x2003 - em space
'\u2004', #  8196 - 0x2004 - three-per-em space
'\u2005', #  8197 - 0x2005 - four-per-em space
'\u2006', #  8198 - 0x2006 - six-per-em space
'\u2007', #  8199 - 0x2007 - figure space
'\u2008', #  8200 - 0x2008 - punctuation space
'\u2009', #  8201 - 0x2009 - thin space
'\u200a', #  8202 - 0x200a - hair space
'\u2028', #  8232 - 0x2028 - line separator
'\u2029', #  8233 - 0x2029 - paragraph separator
'\u202f', #  8239 - 0x202f - narrow no-break space
'\u205f', #  8287 - 0x205f - medium mathematical space
'\u3000', # 12288 - 0x3000 - ideographic space

This list was derived by iterating over every character defined in Unicode, and testing to see if the split() method on a Python str object splits at that character.

The first surprise: this isn't the same as the list of all characters defined by Unicode as whitespace. It's almost the same list, except Python adds four extra characters: '\x1c', '\x1d', '\x1e', and '\x1f', which respectively are called "file separator", "group separator", "record separator", and "unit separator". I'll refer to these as "the four ASCII separator characters".

These characters were defined as part of the original ASCII standard, way back in 1963. As their names suggest, they were intended to be used as separator characters for data, the same way Ctrl-Z was used to indicate end-of-file in the CPM and earliest FAT filesystems. But the four ASCII separator characters were rarely used even back in the day. Today they're practically unheard of.

As a rule, printing these characters to the screen generally doesn't do anything--they don't move the cursor, and the screen doesn't change. So their behavior is a bit mysterious. A lot of people (including early Python programmers it seems!) thought that meant they're whitespace. This seems like an odd conclusion to me. After all, all the other whitespace characters move the cursor, either right or down or both; these don't move the cursor at all.

The Unicode standard is unambiguous: these characters are not whitespace. And yet Python's "Unicode object" behaves as if they are. So I'd say this is a bug; Python's Unicode object should implement what the Unicode standard says.

Like many bugs, this one has lingered for a long time. The behavior is present in Python 2, there's a ten-year-old issue on the Python issue tracker about this, and it's not making progress.

The second surprise has to do with bytes objects. Of course, bytes objects represent binary data, and don't necessarily represent characters. Even if they do, they don't have any encoding associated with them. However, for convenience--and backwards-compatibility with Python 2--Python's bytes objects support several method calls that treat the data as if it were "ASCII-compatible".

The surprise: These methods on Python bytes objects recognize a different set of whitespace characters. Here's the list of all bytes recognized by Python bytes objects as whitespace:

# char  decimal  hex    name
#######################################
'\t'    , #  9 - 0x09 - tab
'\n'    , # 10 - 0x0a - newline
'\v'    , # 11 - 0x0b - vertical tab
'\f'    , # 12 - 0x0c - form feed
'\r'    , # 13 - 0x0d - carriage return
' '     , # 32 - 0x20 - space

This list was derived by iterating over every possible byte value, and testing to see if the split() method on a Python bytes object splits at that byte.

The good news is, this list is the same as ASCII's list, and it agrees with Unicode. In fact this list is quite familiar to C programmers; it's the same whitespace characters recognized by the standard C function isspace() (in ctypes.h). Python has used this function to decide which characters are and aren't whitespace in 8-bit strings since its very beginning.

Notice that this list doesn't contain the four ASCII separator characters. That these two types in Python don't agree only enhances the mystery.

Line-breaking characters

The situation is slightly worse with line-breaking characters. Line-breaking characters are a subset of whitespace characters; they're whitespace characters that always move the cursor down. And, as with whitespace generally, Python str objects don't agree with Unicode about what is and is not a line-breaking character, and Python bytes objects don't agree with either of those.

Here's the list of all Unicode characters recognized by Python str objects as line-breaking characters:

# char    decimal   hex      name
##########################################
'\n'    , #   10 0x000a - newline
'\v'    , #   11 0x000b - vertical tab
'\f'    , #   12 0x000c - form feed
'\r'    , #   13 0x000d - carriage return
'\x1c'  , #   28 0x001c - file separator
'\x1d'  , #   29 0x001d - group separator
'\x1e'  , #   30 0x001e - record separator
'\x85'  , #  133 0x0085 - next line
'\u2028', # 8232 0x2028 - line separator
'\u2029', # 8233 0x2029 - paragraph separator

This list was derived by iterating over every character defined in Unicode, and testing to see if the splitlines() method on a Python str object splits at that character.

Again, this is different from the list of characters defined as line-breaking whitespace in Unicode. And again it's because Python defines some of the four ASCII separator characters as line-breaking characters. In this case it's only the first three; Python doesn't consider the fourth, "unit separator", as a line-breaking character. (I don't know why Python draws this distinction... but then again, I don't know why it considers the first three to be line-breaking. It's all a mystery to me.)

Here's the list of all characters recognized by Python bytes objects as line-breaking characters:

# char  decimal hex      name
#######################################
'\n'    , #  10 0x000a - newline
'\r'    , #  13 0x000d - carriage return

This list was derived by iterating over every possible byte, and testing to see if the splitlines() method on a Python bytes object splits at that byte.

It's here we find our final unpleasant surprise: the methods on Python bytes objects don't consider '\v' (vertical tab) and '\f' (form feed) to be line-break characters. I assert this is also a bug. These are well understood to be line-breaking characters; "vertical tab" is like a "tab", except it moves the cursor down instead of to the right. And "form feed" moves the cursor to the top left of the next "page", which requires advancing at least one line.

How big handles this situation

To be crystal clear: the odds that any of this will cause a problem for you are extremely low. In order for it to make a difference:

you'd have to encounter text using one of these six characters where Python disagrees with Unicode and ASCII, and
you'd have to process the input based on some definition of whitespace, and
it would have to produce different results than you might have other wise expected, and
this difference in results would have to be important.

It seems extremely unlikely that all of these will be true for you.

In case this does affect you, big has a complete set of predefined whitespace tuples that will handle any of these situations. big defines a total of ten tuples, sorted into five categories.

In every category there are two values: one that contains whitespace, the other contains linebreaks. The whitespace tuple contains all the possible values of whitespace--characters that move the cursor either horizontally, or vertically, or both, but don't print anything visible to the screen. The linebreaks tuple contains the subset of whitespace characters that move the cursor vertically.

The most important two values start with str_: str_whitespace and str_linebreaks. These contain all the whitespace characters recognized by the Python str object.

Next are two values that start with unicode_: unicode_whitespace and unicode_linebreaks. These contain all the whitespace characters defined in the Unicode standard. They're the same as the str_ tuples except we remove the four ASCII separator characters.

Third, two values that start with ascii_: ascii_whitespace and ascii_linebreaks. These contain all the whitespace characters defined in ASCII. (Note that these contain str objects, not bytes objects.) They're the same as the unicode_ tuples, except we throw away all characters with a code point higher than 127.

Fourth, two values that start with bytes_: bytes_whitespace and bytes_linebreaks. These contain all the whitespace characters recognized by the Python bytes object. These tuples contain bytes objects, encoded using the ascii encoding. The list of characters is distinct from the other sets of tuples, and was derived as described above.

Finally we have the two tuples that lack a prefix: whitespace and linebreaks. These are the tuples you should use most of the time, and several big functions use them as default values. These are simply copies of str_whitespace and str_linebreaks respectively.

(big actually defines an additional ten tuples, as discussed in the very next section.)

The Unix, Mac, and DOS line-break conventions

Historically, different platforms used different ASCII characters--or sequences of ASCII characters--to represent "go to the next line" in text files. Here are the most popular conventions:

\n    - UNIX, Amiga, macOS 10+
\r    - macOS 9 and earlier, many 8-bit computers
\r\n  - Windows, DOS

(There are a couple more conventions, and a lot more history, in the Wikipedia article on newlines.)

Handling these differing conventions was a stumbling block for a long time--both for computer programs, and in the daily lives of computer users. Python went through several iterations on how to handle this, eventually settling on the "universal newlines" support added in Python 2.3. These days the world seems to be converging on the UNIX standard '\n'; Windows supports it, and it's the default on every other modern platform. So in practice you probably don't have end-of-line conversion problems, either.

But just in case, big has one more trick. All of the tuples defined in the previous section--from whitespace to ascii_linebreaks--also contain this string:

'\r\n'

(The two bytes_ tuples contain the bytes equivalent, b'\r\n.)

This addition means that, when you use one of these tuples with one of the big functions that take separators, it'll split on \r\n as if it was one character. This means that big itself should automatically handle the DOS and Windows end-of-line character sequence, in case one happens to creep into your data.

If you don't want this behavior, just add the suffix _without_crlf to the end of any of the ten tuples, e.g. whitespace_without_crlf, bytes_linebreaks_without_crlf.

Whitespace and line-breaking characters for other platforms

What if you need to split text by whitespace, or by lines, but that text is in bytes format with an unusual encoding? big makes that easy too. If one of the builtin tuples won't work for you, you can can make your own tuple from scratch, or modify an existing tuple to meet your needs.

For example, let's say you need to split a document by whitespace, and the document is encoded in code page 850, aka "latin-1". Normally the easiest thing would be to decode it a str object using the 'latin-1' text codec, then operate on it normally. But you might have reasons why you don't want to decode it--maybe the document is damaged and doesn't decode properly, and it's easier to work with the encoded bytes than to fix it. If you want to process the text with a big function that accepts a separator argument, you could make your own custom tuple of "latin-1" whitespace characters. "latin-1" has the same whitespace characters as ASCII, but adds one more, value 255, which is not line-breaking. So it's easy to make the appropriate tuples yourself:

latin_1_whitespace = big.bytes_whitespace + (b'\xff',)
latin_1_linebreaks = big.bytes_linebreaks

What if you want to process a bytes object containing UTF-8? That's easy too. Just convert one of the existing tuples containing str objects using big.encode_strings. For example, to split a UTF-8 encoded bytes object b using the Unicode line-breaking characters, you could call:

multisplit(b, encode_strings(unicode_linebreaks, encoding='utf-8'))

Note that this technique probably won't work correctly for most other multibyte encodings, for example UTF-16. For these encodings, you should decode to str before processing.

Why? It's because multisplit could find matches in multibyte sequences straddling characters. Consider this example:

>>> haystack = '\u0101\u0102'
>>> needle = '\u0201'
>>> needle in haystack
False
>>>
>>> encoded_haystack = haystack.encode('utf-16-le')
>>> encoded_needle = needle.encode('utf-16-le')
>>> encoded_needle in encoded_haystack
True

The character '\u0201' doesn't appear in the original string, but the encoded version appears in the encoded string, as the second byte of the first character and the first byte of the second character:

>>> encoded_haystack
b'\x01\x01\x02\x01'
>>> encoded_needle
b'\x01\x02'

`lines` and lines modifier functions

lines is a function that makes it easy to write well-behaved, feature-rich text parsers.

lines itself iterates over a string, returning an iterator that yields individual lines split from that string. The iterator yields a 2-tuple:

(LinesInfo, line)

The LinesInfo object provides the line number and starting column number for each line. This makes it easy for your parser to provide line and column information for error messages.

This iterator is designed to be modified by "lines modifier" functions. These are functions that consume a lines iterator and re-yield the values, possibly modifying or discarding them along the way. For example, passing a lines iterator into lines_filter_empty_lines results in an iterator that skips over the empty lines. All the lines modifier functions that ship with big start with the string lines_.

Most lines modifier function names belong to a category, encoded as the second word in the function name (immediately after lines_). Some examples:

lines_filter_ functions conditionally remove lines from the output. For example, lines_filter_empty_lines will only yield a line if it isn't empty.
lines_strip_ functions may remove one or more substrings from the line. For example, lines_strip_indent strips the leading whitespace from a line before yielding it. (Whenever a lines modifier removes leading text from a line, it will add a leading field to the accompanying LineInfo object containing the removed substring, and will also update the column_number of the line to reflect the new starting column.)
lines_convert_ functions means this lines modifier may change one or more substrings in the line. For example, lines_convert_tabs_to_spaces changes tab characters to space characters in any lines it processes.

(big isn't strictly consistent about these category names though. For example, lines_containing and lines_grep are obviously "filter" modifiers, but their names don't start with lines_filter_.)

All lines modifier functions are composable with each other; you can "stack" them together simply by passing the output of one into the input of another. For example,

     with open("textfile.txt", "rt") as f:
         for info, line in big.lines_filter_empty_lines(
     	     big.lines_rstrip(lines(f.read()))):
     	     ...

will iterate over the lines of textfile.txt, skipping over all empty lines and lines that consist only of whitespace.

When you stack line modifiers in this way, note that the outer modifiers happen later. In the above example, each line is first "r-stripped", and then discarded if it's empty. If you stacked the line modifiers in the opposite order:

     with open("textfile.txt", "rt") as f:
         for info, line in big.lines_rstrip(
     	     big.lines_filter_empty_lines(lines(f.read()))):
     	     ...

then it'd filter out empty lines first, and then "r-strip" the lines. So lines in the input that contained only whitespace would still get yielded as empty lines, which is probably not what you want. Ordering is important!

It's probably clearer to constructed nested lines modifiers this way:

     with open("textfile.txt", "rt") as f:
         li = lines(f.read())
         li = big.lines_filter_empty_lines(li)
         li = big.lines_rstrip(li)
         for info, line in li:
           ...

This is much easier to read, particularly when one or more lines modifiers take additional arguments.

Of course, you can write your own lines modifier functions. Simply accept a lines iterator as an argument, iterate over it, and yield each line info and line--modifying them (or not yielding them!) as you see fit. You could even write your own lines iterator, a replacement for lines, if you need functionality lines doesn't provide.

Note that if you write your own lines modifier function, and it removes text from the beginning the line, you must update column_number in the LineInfo object manually--it doesn't happen automatically. The easiest way to handle this is also the best way: whenever clipping text from the beginning or end of the line, use the clip_leading and clip_trailing methods on the LineInfo object.

Speaking of best practices for lines modifier functions, it's also best practice to modify the existing LineInfo object that was yielded to you, rather than throwing it away, creating a new one, and yielding that instead. Previous lines modifier iterators may have added fields to the LineInfo that you'd to preserve.

leading + line + trailing + end

Generally speaking, LineInfo objects obey an invariant. For any (info, line) pair yielded by lines or a lines modifier:

info.leading + line + info.trailing + info.end == info.line

That is, you can recreate the original line by concatenating the "leading" string, the modified line, the "trailing" string, and the "end" string.

Of course, this won't be true if you use lines modifiers that replace characters in the line. For example, lines_convert_tabs_to_spaces replaces tab characters with one or more space characters. If the original line contains tabs, obviously the above invariant will no longer hold true.

Word wrapping and formatting

big contains three functions used to reflow and format text in a pleasing manner. In the order you should use them, they are split_text_with_code, wrap_words(),, and optionally merge_columns. This trio of functions gives you the following word-wrap superpowers:

Paragraphs of text representing embedded "code" don't get word-wrapped. Instead, their formatting is preserved.
Multiple texts can be merged together into multiple columns.

"text" vs "code"

The big word wrapping functions also distinguish between "text" and "code". The main distinction is, "text" lines can get word-wrapped, but "code" lines shouldn't. big considers any line starting with enough whitespace to be a "code" line; by default, this is four spaces. Any non-blank line that starting with four spaces is a "code" line, and any non-blank line that starts with less than four spaces is a "text" line.

In "text" mode:

words are separated by whitespace,
initial whitespace on the line is discarded,
the amount of whitespace between words is irrelevant,
individual newline characters are ignored, and
more than two newline characters are converted into exactly two newlines (aka a "paragraph break").

In "code" mode:

all whitespace is preserved, except for trailing whitespace on a line, and
all newline characters are preserved.

Also, whenever split_text_with_code switches between "text" and "code" mode, it emits a paragraph break.

Split text array

A split text array is an intermediary data structure used by big.text functions to represent text. It's literally just an array of strings, where the strings represent individual word-wrappable substrings.

split_text_with_code returns a split text array, and wrap_words() consumes a split text array.

You'll see four kinds of strings in a split text array:

Individual words, ready to be word-wrapped.
Entire lines of "code", preserving their formatting.
Line breaks, represented by a single newline: '\n'.
Paragraph breaks, represented by two newlines: '\n\n'.

Examples

This might be clearer with an example or two. The following text:

hello there!
this is text.


this is a second paragraph!

would be represented in a Python string as:

"hello there!\nthis is text.\n\n\nthis is a second paragraph!"

Note the three newlines between the second and third lines.

If you then passed this string in to split_text_with_code, it'd return this split text array:

[ 'hello', 'there!', 'this', 'is', 'text.', '\n\n',
  'this', 'is', 'a', 'second', 'paragraph!']

split_text_with_code merged the first two lines together into a single paragraph, and collapsed the three newlines separating the two paragraphs into a "paragraph break" marker (two newlines in one string).

Now let's add an example of text with some "code". This text:

What are the first four squared numbers?

    for i in range(1, 5):


        print(i**2)

Python is just that easy!

would be represented in a Python string as (broken up into multiple strings for clarity):

"What are the first four squared numbers?\n\n"
+
"    for i in range(1, 5):\n\n\n"
+
"        print(i**2)\n\nPython is just that easy!"

split_text_with_code considers the two lines with initial whitespace as "code" lines, and so the text is split into the following split text array:

['What', 'are', 'the', 'first', 'four', 'squared', 'numbers?', '\n\n',
  '    for i in range(1, 5):', '\n', '\n', '\n', '        print(i**2)', '\n\n',
  'Python', 'is', 'just', 'that', 'easy!']

Here we have a "text" paragraph, followed by a "code" paragraph, followed by a second "text" paragraph. The "code" paragraph preserves the internal newlines, though they are represented as individual "line break" markers (strings containing a single newline). Every paragraph is separated by a "paragraph marker".

Here's a simple algorithm for joining a split text array back into a single string:

prev = None
a = []
for word in split_text_array:
    if not (prev and prev.isspace() and word.isspace()):
        a.append(' ')
    a.append(word)
text = "".join(a)

Of course, this algorithm is too simple to do word wrapping. Nor does it handle adding two spaces after sentence-ending punctuation. In practice, you shouldn't do this by hand; you should use wrap_words.

Merging columns

merge_columns merges multiple strings into columns on the same line.

For example, it could merge these three Python strings:

[
"Here's the first\ncolumn of text.",
"More text over here!\nIt's the second\ncolumn!  How\nexciting!",
"And here's a\nthird column.",
]

into the following text:

Here's the first    More text over here!   And here's a
column of text.     It's the second        third column.
                    column!  How
                    exciting!

(Note that merge_columns doesn't do its own word-wrapping; instead, it's designed to consume the output of wrap_words.)

Each column is passed in to merge_columns as a "column tuple":

(s, min_width, max_width)

s is the string, min_width is the minimum width of the column, and max_width is the minimum width of the column.

As you saw above, s can contain newline characters, and merge_columns obeys those when formatting each column.

For each column, merge_columns measures the longest line of each column. The width of the column is determined as follows:

If the longest line is less than min_width characters long, the column will be min_width characters wide.
If the longest line is less than or equal to min_width characters long, and less than or equal to max_width characters long, the column will be as wide as the longest line.
If the longest line is greater than max_width characters long, the column will be max_width characters wide, and lines that are longer than max_width characters will "overflow".

Overflow

What is "overflow"? It's a condition merge_columns may encounter when the text in a column is wider than that column's max_width. merge_columns needs to consider both "overflow lines", lines that are longer than max_width, and "overflow columns", columns that contain one or more overflow lines.

What does merge_columns do when it encounters overflow? merge_columns supports three "strategies" to deal with this condition, and you can specify which one you want using its overflow_strategy parameter. The three strategies are:

OverflowStrategy.RAISE: Raise an OverflowError exception. The default.
OverflowStrategy.INTRUDE_ALL: Intrude into all subsequent columns on all lines where the overflowed column is wider than its max_width. The subsequent columns "make space" for the overflow text by not adding text on those overflowed lines; this is called "pausing" their output.
OverflowStrategy.DELAY_ALL: Delay all columns after the overflowed column, not beginning any until after the last overflowed line in the overflowed column. This is like the INTRUDE_ALL strategy, except that the columns "make space" by pausing their output until the last overflowed line.

Enhanced `TopologicalSorter`

Overview

big's TopologicalSorter is a drop-in replacement for graphlib.TopologicalSorter in the Python standard library (new in 3.9). However, the version in big has been greatly upgraded:

prepare is now optional, though it still performs a cycle check.
You can add nodes and edges to a graph at any time, even while iterating over the graph. Adding nodes and edges always succeeds.
You can remove nodes from graph g with the new method g.remove(node). Again, you can do this at any time, even while iterating over the graph. Removing a node from the graph always succeeds, assuming the node is in the graph.
The functionality for iterating over a graph now lives in its own object called a view. View objects implement the get_ready, done, and __bool__ methods. There's a default view built in to the graph object; the get_ready, done, and __bool__ methods on a graph just call into the graph's default view. You can create a new view at any time by calling the new view method.

Note that if you're using a view to iterate over the graph, and you modify the graph, and the view now represents a state that isn't coherent with the graph, attempting to use that view raises a RuntimeError. (I'll define what I mean by view "coherence" in the next subsection.)

This implementation also fixes some minor warts with the existing API:

In Python's implementation, static_order and get_ready/done are mutually exclusive. If you ever call get_ready on a graph, you can never call static_order, and vice-versa. The implementaiton in big doesn't have this restriction, because its implementation of static_order creates and uses a new view object every time it's called.
In Python's implementation, you can only iterate over the graph once, or call static_order once. The implementation in big solves this in several ways: it allows you to create as many views as you want, and you can call the new reset method on a view to reset it to its initial state.

View coherence

So what does it mean for a view to no longer be coherent with the graph? Consider the following code:

g = big.TopologicalSorter()
g.add('B', 'A')
g.add('C', 'A')
g.add('D', 'B', 'C')
g.add('B', 'A')
v = g.view()
g.ready() # returns ('A',)
g.add('A', 'Q')

First this creates a graph g with a classic "diamond" dependency pattern. Then it creates a new view v, and gets the currently "ready" nodes, which consists just of the node 'A'. Finally it adds a new dependency: 'A' depends on 'Q'.

At this moment, view v is no longer coherent. 'A' has been marked as "ready", but 'Q' has not. And yet 'A' depends on 'Q'. All those statements can't be true at the same time! So view v is no longer coherent, and any attempt to interact with v raises an exception.

To state it more precisely: if view v is a view on graph g, and you call g.add('Z', 'Y'), and neither of these statements is true in view v:

'Y' has been marked as done.
'Z' has not yet been yielded by get_ready.

then v is no longer "coherent".

(If 'Y' has been marked as done, then it's okay to make 'Z' dependent on 'Y' regardless of what state 'Z' is in. Likewise, if 'Z' hasn't been yielded by get_ready yet, then it's okay to make 'Z' dependent on 'Y' regardless of what state 'Y' is in.)

Note that you can restore a view to coherence. In this case, removing either Y or Z from g would resolve the incoherence between v and g, and v would start working again.

Also note that you can have multiple views, in various states of iteration, and by modifying the graph you may cause some to become incoherent but not others. Views are completely independent from each other.

Bound inner classes

Overview

One minor complaint I have about Python regards inner classes. An "inner class" is a class defined inside another class. And, well, inner classes seem kind of half-baked. Unlike functions, inner classes don't get bound to the object.

Consider this Python code:

class Outer(object):
    def method(self):
        pass
    class Inner(object):
        def __init__(self):
            pass

o = Outer()
o.method()
i = o.Inner()

When o.method is called, Python automatically passes in the o object as the first parameter (generally called self). In object-oriented lingo, o is bound to method, and indeed Python calls this object a bound method:

    >>> o.method
    <bound method Outer.method of <__main__.Outer object at 0x########>>

But that doesn't happen when o.Inner is called. (It does pass in a self, but in this case it's the newly-created Inner object.) There's just no built-in way for the o.Inner object being constructed to automatically get a reference to o. If you need one, you must explicitly pass one in, like so:

class Outer(object):
    def method(self):
        pass
    class Inner(object):
        def __init__(self, outer):
            self.outer = outer

o = Outer()
o.method()
i = o.Inner(o)

This seems redundant. You don't have to pass in o explicitly to method calls, why should you have to pass it in explicitly to inner classes?

Well--now you don't have to! You just decorate the inner class with @big.BoundInnerClass, and BoundInnerClass takes care of the rest!

Using bound inner classes

Let's modify the above example to use our BoundInnerClass decorator:

from big import BoundInnerClass

class Outer(object):
    def method(self):
        pass

    @BoundInnerClass
    class Inner(object):
        def __init__(self, outer):
            self.outer = outer

o = Outer()
o.method()
i = o.Inner()

Notice that Inner.__init__ now requires an outer parameter, even though you didn't pass in any arguments to o.Inner. When it's called, o is magically passed in to outer! Thanks, BoundInnerClass! You've saved the day!

Decorating an inner class like this always adds a second positional parameter, after self. And, like self, you don't have to use the name outer, you can use any name you like. (Although it's probably a good idea, for consistency's sakes.)

Inheritance

Bound inner classes get slightly complicated when mixed with inheritance. It's not all that difficult, you merely need to obey the following rules:

A bound inner class can inherit normally from any unbound class.
To subclass from a bound inner class while still inside the outer class scope, or when referencing the inner class from the outer class (as opposed to an instance of the outer class), you must actually subclass or reference classname.cls. This is because inside the outer class, the "class" you see is actually an instance of a BoundInnerClass object.
All classes that inherit from a bound inner class must always call the superclass's __init__. You don't need to pass in the outer parameter; it'll be automatically passed in to the superclass's __init__ as before.
An inner class that inherits from a bound inner class, and which also wants to be bound to the outer object, should be decorated with BoundInnerClass.
An inner class that inherits from a bound inner class, but doesn't want to be bound to the outer object, should be decorated with UnboundInnerClass.

Restating the last two rules: every class that descends from any BoundInnerClass should be decorated with either BoundInnerClass or UnboundInnerClass. Which one you use depends on what behavior you want--whether or not you want your inner subclass to automatically get the outer instance passed in to its __init__.

Here's a simple example using inheritance with bound inner classes:

from big import BoundInnerClass, UnboundInnerClass

class Outer(object):

    @BoundInnerClass
    class Inner(object):
        def __init__(self, outer):
            self.outer = outer

    @UnboundInnerClass
    class ChildOfInner(Inner.cls):
        def __init__(self):
            super().__init__()

o = Outer()
i = o.ChildOfInner()

We followed the rules:

Inner inherits from object; since object isn't a bound inner class, there are no special rules about inheritance Inner needs to obey.
ChildOfInner inherits from Inner.cls, not Inner.
Since ChildOfInner inherits from a BoundInnerClass, it must be decorated with either BoundInnerClass or UnboundInnerClass. It doesn't want the outer object passed in, so it's decorated with UnboundInnerClass.
ChildOfInner.__init__ calls super().__init__.

Note that, because ChildOfInner is decorated with UnboundInnerClass, it doesn't take an outer parameter. Nor does it pass in an outer argument when it calls super().__init__. But when the constructor for Inner is called, the correct outer parameter is passed in--like magic! Thanks again, BoundInnerClass!

If you wanted ChildOfInner to also get the outer argument passed in to its __init__, just decorate it with BoundInnerClass instead of UnboundInnerClass, like so:

from big import BoundInnerClass

class Outer(object):

    @BoundInnerClass
    class Inner(object):
        def __init__(self, outer):
            self.outer = outer

    @BoundInnerClass
    class ChildOfInner(Inner.cls):
        def __init__(self, outer):
            super().__init__()
            assert self.outer == outer

o = Outer()
i = o.ChildOfInner()

Again, ChildOfInner.__init__ doesn't need to explicitly pass in outer when calling super.__init__.

You can see more complex examples of using inheritance with BoundInnerClass (and UnboundInnerClass) in the big test suite.

Miscellaneous notes

If you refer to a bound inner class directly from the outer class, rather than using the outer instance, you get the original class. This ensures that references to Outer.Inner are consistent; this class is also a base class of all the bound inner classes. Additionally, if you attempt to construct an instance of an unbound Outer.Inner class without referencing it via an instance, you must pass in the outer parameter by hand--just like you'd have to pass in the self parameter by hand when calling a method on the class itself rather than on an instance of the class.
If you refer to a bound inner class from an outer instance, you get a subclass of the original class.
Bound classes are cached in the outer object, which both provides a small speedup and ensures that isinstance relationships are consistent.
You must not rename inner classes decorated with either BoundInnerClass or UnboundInnerClass! The implementation of BoundInnerClass looks up the bound inner class in the outer object by name in several places. Adding aliases to bound inner classes is harmless, but the original attribute name must always work.
Bound inner classes from different objects are different classes. This is symmetric with bound methods; if you have two objects a and b that are instances of the same class, a.BoundInnerClass != b.BoundInnerClass, just as a.method != b.method.
The binding only goes one level deep; if you had an inner class C inside another inner class B inside a class A, the constructor for C would be called with the B object, not the A object.
Similarly, if you have a bound inner class B inside a class A, and another bound inner class D inside a class C, and D inherits from B, the constructor for D will be called with the B object but not the A object. When D calls super().__init__ it'll have to fill in the outer parameter by hand.
There's a race condition in the implementation: if you access a bound inner class through an outer instance from two separate threads, and the bound inner class was not previously cached, the two threads may get different (but equivalent) bound inner class objects, and only one of those instances will get cached on the outer object. This could lead to confusion and possibly cause bugs. For example, you could have two objects that would be considered equal if they were instances of the same bound inner class, but would not be considered equal if instantiated by different instances of that same bound inner class. There's an easy workaround for this problem: access the bound inner class from the __init__ of the outer class, which should allow the code to cache the bound inner class instance before a second thread could ever get a reference to the outer object.

Release history

0.12.3

2024/09/17

Optimized split_delimiters. The new version uses a much more efficient internal representation of how to react to the various delimiters when processing the text. Perfunctory timeit experiments suggest this new split_delimiters is maybe 5-6% faster than it was in 12.2.

Minor breaking change: split_delimiters now consistently raises SyntaxError for mismatched delimiters. (Previously it would sometimes raise ValueError.)

0.12.2

2024/09/11

A minor semantic change to lines_strip_indent: when it encounters a whitespace-only line, it clips the line to trailing in the LineInfo object. It used to clip such lines to leading. But this changed LineInfo.column_number in a nonsensical way.

This behavior is policy going forward: if a lines modifer function ever clips the entire line, it must clip it to trailing rather than leading. It shouldn't matter one way or another, as whitespace-only lines arguably shouldn't have any explicit semantics. But it makes intuitive sense to me that their empty line should be at column number 1, rather than 9 or 13 or whatnot. (Especially considering that with lines_strip_indent their indent value is synthetic anyway, inferred by looking ahead.)
Major cleanup to the lines modifier test suites.

0.12.1

2024/09/07

In fine big tradition, here's an update published immediately after a big release.

Surprisingly, even though this is only a small update, it still adds two new packages to big: metadata and version.

There's sadly one breaking change.

`big.metadata`

New package. A package containing metadata about big itself. Currently only contains one thing: version.

`big.version`

New package. A package for working with version information.

`lines_strip_line_comments`

The default value for quotes has changed. Now it's what it should always have been: empty. No quote marks are defined by default, which means the default behavior of lines_strip_line_comments is now to simply truncate the line at the leftmost comment marker.

Processing quote marks by default was always too opinionated for this function. Consider: having ' active as a quote marker meant that single-quotes need to be balanced,

Wish I'd figured this out before the release yesterday! Hopefully this will only cause smiles, and no teeth-gnashing.

`metadata.version`

New value. A Version object representing the current version of big.

`Version`

New class. Version represents a version number. You can construct them from PEP 440-compliant version strings, or specify them using keyword-only parameters. Version objects are immutable, ordered, and hashable.

0.12

2024/09/06

Lots of changes this time! Most of 'em are in the big.text module, particularly the lines and lines modifier functions. But plenty of other modules got in on the fun too.

big even has a new module: deprecated. Deprecated functions and classes get moved into this module. Note that the contents of deprecated are not automatically imported into big.all.

The following functions and classes have breaking changes:

Delimiter

LineInfo

lines_strip_line_comments

split_delimiters

split_quoted_strings

These functions have been renamed:

lines_filter_comment_lines is now lines_filter_line_comment_lines

lines_strip_comments is now lines_strip_line_comments

parse_delimiters is now split_delimiters

big has five new functions:

combine_splits

encode_strings

LineInfo.clip_leading

LineInfo.clip_trailing

split_title_case

Finally, here's an in-depth description of all changes in big 0.12, sorted by API name.

`bytes_linebreaks` and `bytes_linebreaks_without_crlf`

Extremely minor change! Python's bytes and str objects don't agree on which ASCII characters represent line breaks. The str object obeys the Unicode standard, which means there are four:

\n \v \f \r

For some reason, Python's bytes object only supports two:

\n \r

I have no idea why this is. We might fix it. And if we do, big is ready. It now calculates bytes_linebreaks and bytes_linebreaks_without_crlf on the fly to agree with Python. If either (or both) work as newline characters for the splitlines method on a bytes object, they'll automatically be inserted into these iterables of bytes linebreaks.

`combine_splits`

New function. If you split a string two different ways, producing two arrays that sum to the original string, combine_splits will merge those splits together, producing a new array that splits in every place any of the two split arrays had a split.

Example:

>>> big.combine_splits("abcdefg", ['a', 'bcdef', 'g'], ['abc', 'd', 'efg'])
['a, 'bc', 'd', 'ef', 'g']

`Delimiter`

Delimiter is a simple data class, representing information about delimiters to split_delimiters (previously parse_delimiters). split_delimiters has changed, and some of those changes are reflected in the Delimiter object; also, some changes to Delimiter are simply better API choices.

The old Delimiter object is deprecated but still available, as big.deprecated.Delimiter. It should only be used with big.deprecated.parse_delimiters, which is also deprecated. big.deprecated.Delimiter will be removed when big.deprecated.parse_delimiters is removed, which will be no sooner than September 2025.

Changes:

The first argument to the old Delimiter object was open, and was stored as the open attribute. These have both been completely removed. Now, the "open delimiter" is specified as a key in a dictionary of delimiters, mapping open delimiters to Delimiter objects.
The old Delimiter object had a boolean backslash attribute; if it was True, that delimiter allows escaping using a backslash. Now Delimiter has an escape parameter and attribute, specifying the escape string you want to use inside that set of delimiters.
Delimiter also now has two new attributes, quoting and multiline. These default to False and True respectively; you can specify values for these with keyword-only arguments to the constructor.
The new Delimiter object is read-only after construction, and is hashable.

`encode_strings`

Slightly liberalized the types it accepts. It previously required o to be a collection; now o can be a bytes or str object. Also, it now explicitly supports set.

`get_int_or_float`

Minor behavior change. If the o you pass in is a float, or can be converted to float (but couldn't be converted directly to an int), get_int_or_float will experimentally convert that float to an int. If the resulting int compares equal to that float, it'll return the int, otherwise it'll return the float.

For example, get_int_or_float("13.5") still returns 13.5 (a float), but get_int_or_float("13.0") now returns 13 (an int). (Previously, get_int_or_float("13.0") would have returned 13.0.)

This better represents the stated aesthetic of the function--it prefers ints to floats. And since the int is exactly equal to the float, I assert this is completely backwards compatible.

`Heap`

Minor updates to the documentation and to the text of some exceptions.

`LineInfo`

Breaking change: the LineInfo constructor has a new lines positional parameter, added in front of the existing positional parameters. This new first argument should be the lines iterator that yielded this LineInfo object. It's stored in the lines attribute. (Why this change? The lines object contains information needed by the lines modifiers, for example tab_width.)

Minor optimization: LineInfo objects previously had many optional fields, which might or might not be added dynamically. Now all fields are pre-added. (This makes the CPython 3.13 runtime happier; it really wants you to set all your class's attributes in its __init__.)

Minor breaking change: the original string stored in the line attribute now includes the linebreak character, if any. This means concatenating all the info.line strings will reconstruct the original s passed in to lines.

New feature: while some methods used to update the leading attribute when they clipped leading text from the line, the "lines modifiers" are now very consistent about updating leading, and the new symmetrical attribute trailing.

New feature: LineInfo now has an end attribute, which contains the end-of-line character that ended this line.

These three attributes allow us to assert a new invariant: as long as you modify the contents of line (e.g. turning tabs into spaces),

info.leading + line + info.trailing + info.end == info.line

LineInfo objects now always have these attributes:

lines, which contains the base lines iterator.
line, which contains the original unmodified line.
line_number, which contains the line number of this line.
column_number, which contains the starting column number of the first character of this line.
indent, which contains the indent level of the line if computed, and None otherwise.
leading, which contains the string stripped from the beginning of the line. Initially this is the empty string.
trailing, which contains the string stripped from the end of the line. Initially this is the empty string.
end, which is the end-of-line character that ended the current line. For the last line yielded, info.end will always be the empty string. If the last character of the text split by lines was an end-of-line character, the last line yielded will be the empty string, and info.end will also be the empty string.
match, which contains a Match object if this line was matched with a regular expression, and None otherwise.

`LineInfo.clip_leading` and `LineInfo.clip_trailing`

LineInfo also has two new methods: LineInfo.clip_leading and LineInfo.clip_trailing(line, s). These methods clip a leading or trailing substring from the current line, and transfer it to the relevant field in LineInfo (either leading or trailing). clip_leading also updates the column_number attribute.

The name "clip" was chosen deliberately to be distinct from "strip". "strip" functions on strings remove substrings and throws them away; my "clip" functions on strings removes substrings and puts them somewhere else.

`lines_filter_comment_lines`

lines_filter_comment_lines has been renamed to lines_filter_line_comment_lines. For backwards compatibility, the function is also available under the old name; this old name will eventually be removed, but not before September 2025.

`lines_filter_line_comment_lines`

New name for lines_filter_comment_lines.

Correctness improvements: lines_filter_line_comment_lines now enforces that single-quoted strings can't span lines, and multi-quoted strings must be closed before the end of the last line.

Minor optimization: for every line, it used to lstrip a copy of the line, then use a regular expression to see if the line started with one of the comment characters. Now the regular expression itself skips past any leading whitespace.

`lines_grep`

New feature: lines_grep has always used re.search to examine the lines yielded. It now writes the result to info.match. (If you pass in invert=True to lines_grep, lines_grep still writes to the match attribute--but it always writes None.)

If you want to write the re.Match object to another attribute, pass in the name of that attribute to the keyword-only parameter match.

`lines_rstrip` and `lines_strip`

New feature: lines_rstrip and lines_strip now both accept a separators argument; this is an iterable of separators, like the argument to multisplit. The default value of None preserves the previous behavior, stripping whitespace.

`lines_sort`

New feature: lines_sort now accepts a key parameter, which is used as the key argument for list.sort. The value passed in to key is the (info, line) tuple yielded by the upstream iterator. The default value preserves the previous behavior, sorting by the line (ignoring the info).

`lines_strip_comments`

This function has been renamed lines_strip_line_comments and rewritten, see below. The old deprecated version will be available at big.deprecated.lines_strip_comments until at least September 2025.

Note that the old version of line_strip_comments still uses the current version of LineInfo, so use of this deprecated function is still exposed to those breaking changes. (For example, LineInfo.line now includes the linebreak character that terminated the current line, if any.)

`lines_strip_indent`

Bugfix: lines_strip_indent previously required whitespace-only lines to obey the indenting rules, which was a mistake. My intention was always for lines_strip_indent to behave like Python, and that includes not really caring about the intra-line-whitespace for whitespace-only lines. Now lines_strip_indent behaves more like Python: a whitespace-only line behaves as if it has the same indent as the previous line. (Not that the indent value of an empty line should matter--but this behavior is how you'd intuitively expect it to work.)

`lines_strip_line_comments`

lines_strip_line_comments is the new name for the old lines_strip_comments lines modifier function. It's also been completely rewritten.

Changes:

The old function required quote marks and the escape string to be single characters. The new function allows quote marks and the escape string to be of any length.
The old function had a slightly-smelly triple_quotes parameter to support multiline strings. The new version supports separate parameters for single-line quote marks (quotes) and multiline quote marks (multiline_quotes).
The backslash parameter has been renamed to escape.
The rstrip parameter has been removed. If you need to rstrip the line after stripping the comment, wrap your lines_strip_line_comments call with a lines_rstrip call.
The old function didn't enforce that strings shouldn't span lines--single-quoted and triple-quoted strings behaved identically. The new version raises SyntaxError if quoted strings using non-multiline quote marks contain newlines.

(lines_strip_line_comments has always been implemented using split_quoted_strings; this is why it now supports multicharacter quote marks and escape strings. It also benefits from the new optimizations in split_quoted_strings.)

`multisplit`

Minor optimizations. multisplit used to locally define a new generator function, then call it and return the generator. I promoted the generator function to module level, which means we no longer rebind it each time multisplit is called. As a very rough guess, this can be as much as a 10% speedup for multisplit run on very short workloads. (It's also never slower.)

I also applied this same small optimization to several other functions in the text module. In particular, merge_columns was binding functions inside a loop (!!). (Dumb, huh!) These local functions are still bound inside merge_columns, but now at least they're outside the loop.

Another minor speedup for multisplit: when reverse=True, it used to reverse the results three times! multisplit now explicitly observes and manages the reversed state of the result to avoid needless reversing.

`parse_delimiters`

This function has been renamed split_delimiters and rewritten, see below. The old version is still available, using the name big.deprecated.parse_delimiters module, and will be available until at least September 2025.

`Scheduler`

Code cleanups both in the implementation and the test suite, including one minor semantic change.

Cleaned up Scheduler._next, the internal method call that implements the heart of the scheduler. The only externally visible change: the previous version would call sleep(0) every time it yielded an event. On modern operating systems this should yields the rest of the current thread's current time slice back to the OS's scheduler. This can make multitasking smoother, particularly in Python programs. But this is too opinionated for library code--if you want a sleep(0) there, by golly, you can call that yourself when the Scheduler object yields to you. I've restructured the code and eliminated this extraneous sleep(0).

Also, rewrote big chunks of the test suite (tests/test_scheduler.py). The multithreaded tests are now much better synchronized, while also becoming easier to read. Although it seems intractable to purge all race conditions from the test suite, this change has removed most of them.

`split_delimiters`

split_delimiters is the new name for the old parse_delimiters function. The function has also been completely re-tooled and re-written.

Changes:

parse_delimiters took an iterable of Delimiters objects, or strings of length 2. split_delimiters takes a dictionary mapping open delimiter strings to Delimiter objects, and Delimiter objects no longer have an "open" attribute.
split_delimiters now accepts an state parameter, which specifies the initial state of nested delimiters.
split_delimiters no longer cares if there were unclosed open delimiters at the end of the string. (It used to raise ValueError.) This includes quote marks; if you don't want quoted strings to span multiple lines, it's up to you to detect it and react (e.g. raise an exception).
The internal implementation has changed completely. parse_delimiters manually parsed the input string character by character. split_delimiters uses multisplit, so it zips past the uninteresting characters and only examines the delimiters and escape characters. It's always faster, except for some trivial calls (which are fast enough anyway).
Another benefit of using multisplit: open delimiters, close delimiters, and the escape string may now all be any nonzero length. (In the face of ambiguity, split_delimiters will always choose the longer delimiter.)

`split_quoted_strings`

split_quoted_strings has been completely re-tooled and re-written. The new API is simpler, easier to understand, and conceptually clarified. It's a major upgrade!

Changes:

The value it yields is different:
- The old version yielded (is_quote, segment), where is_quote was a boolean value indicating whether or not segment was quoted. If segment was quoted, it began and ended with (single character) quote marks. To reassemble the original string, join together all the segment strings in order.
- The new version yields (leading_quote, segment, trailing_quote), where leading_quote and trailing_quote are either matching quote marks or empty. If they're true values, the segment string is inside the quotes. To reassemble the original string, join together all the yielded strings in order.
The backslash parameter has been replaced by a new parameter, escape. escape allows specifying the escape string, which defaults to '\' (backslash). If you specify a false value, there will be no escape character in strings.
By default quotes only contains ' (single-quote) and " (double-quote). The previous version also recognized """ and ''' as multiline quote marks by default; this is no longer true, as it's too opinionated and Python-specific.
The old version didn't actually distinguish between single-quoted strings and triple-quoted strings. It simply didn't care whether or not there were newlines inside quoted strings. The new version raises a SyntaxError if there's a newline character inside a string delimited with a quote marker from quotes.
The old version accepted a stinky triple_quotes parameter. That's been removed in favor of a new parameter, multiline_quotes. multiline_quotes is like quotes, except that newline characters are allowed inside their quoted strings.
split_quoted_string accepts another new parameter, state, which sets the initial state of quoting.
Thd old implementation of split_quoted_string used a hand-coded parser, manually analyzing each character in the input text. Now it uses multisplit, so it only bothers to examine the interesting substrings. multisplit has a large startup cost the first time you use a particular set of iterators, but this information is cached for subsequent calls. Bottom line, the new version is much faster for larger workloads. (It can be slower for trivial examples... where speed doesn't matter anyway.)
Another benefit of switching to multisplit: quotes now supports quote delimiters and an escape string of any nonzero length. In the case of ambiguity--if more than one quote delimiter matches at a time--split_quoted_string will always choose the longer delimiter.

`split_title_case`

New function. split_title_case splits a string at word boundaries, assuming the string is in "TitleCase".

`StateManager`

Small performance upgrade for StateManager. observers. StateManager always uses a copy of the observer list (specifically, a tuple) when calling the observers; this means it's safe to modify the observer list at any time. StateManager used to always make a fresh copy every time you called an event; now it uses a cached copy, and only recomputes the tuple when the observer list changes.

(Note that it's not thread-safe to modify the observer list from one thread while also dispatching events in another. Your program won't crash, but the list of observers called may be unpredictable based on which thread wins or loses the race. But this has always been true. As with many libraries, the StateManager API leaves locking up to you.)

p.s. I'm getting close to declaring big as being version 1.0. I don't want to do it until I'm done revising the APIs.

p.p.p.s. Yet again I thank Eric V. Smith for his willingness to humor me in my how-many-parameters-could-dance-on-the-head-of-a-pin API theological discussions.

0.11

released 2023/09/19

Breaking change: renamed almost all the old whitespace and newlines tuples. Worse yet, one symbol has the same name but a different value: ascii_whitespace! I've also changed the suffix _without_dos to the more accurate and intuitive _without_crlf, and similarly changed newlines to linebreaks. Sorry for all the confusion. This resulted from a lot of research into whitespace and newline characters, in Python, Unicode, and ASCII; please see the new deep-dive Whitespace and line-breaking characters in Python and big to see what all the fuss is about. Here's a summary of all the changes to the whitespace tuples:

  RENAMED TUPLES (old name -> new name)
    ascii_newlines               -> bytes_linebreaks
    ascii_whitespace             -> bytes_whitespace
    newlines                     -> linebreaks

    ascii_newlines_without_dos   -> bytes_linebreaks_without_crlf
    ascii_whitespace_without_dos -> bytes_whitespace_without_crlf
    newlines_without_dos         -> linebreaks_without_crlf
    whitespace_without_dos       -> whitespace_without_crlf

  REMOVED TUPLES
    utf8_newlines
    utf8_whitespace

    utf8_newlines_without_dos
    utf8_whitespace_without_dos

  UNCHANGED TUPLES (same name, same meaning)
    whitespace

  NEW TUPLES
    ascii_linebreaks
    ascii_whitespace
    str_linebreaks
    str_whitespace
    unicode_linebreaks
    unicode_whitespace

    ascii_linebreaks_without_crlf
    ascii_whitespace_without_crlf
    str_linebreaks_without_crlf
    str_whitespace_without_crlf
    unicode_linebreaks_without_crlf
    unicode_whitespace_without_crlf

Changed split_text_with_code implementation to use StateManager. (No API or semantic changes, just an change to the internal implementation.)
New function in the big.text module: encode_strings, which takes a container object containing str objects and returns an equivalent object containing encoded versions of those strings as bytes.
When you call multisplit with a type mismatch between 's' and 'separators', the exception it raises now includes the values of 's' and 'separators'.
Added more tests for big.state to exercise all the string arguments of accessor and dispatch.
The exhaustive multisplit tester now lets you specify test cases as cohesive strings, rather than forcing you to split the string manually.
The exhaustive multisplit tester is better at internally verifying that it's doing the right thing. (There are some internal sanity checks, and those are more accurate now.)
Whoops! The name of the main class in big.state is StateManager. I accidentally wrote StateMachine instead in the docs... several times.
Originally the multisplit parameter 'separators' was required. I changed it to optional a while ago, with a default of None. (If you pass in None it uses big.str_whitespace or big.bytes_whitespace, depending on the type of s.) But the documentation didn't reflect this change until... now.
Improved the prose in The multi- family of string functions deep-dive. Hopefully now it does a better job of selling multisplit to the reader.
The usual smattering of small doc fixes and improvements.

My thanks again to Eric V. Smith for his willingness to consider and discuss these issues. Eric is now officially a contributor to big, increasing the project's bus factor to two. Thanks, Eric!

0.10

released 2023/09/04

Added the new big.state module, with its exciting StateManager class!
int_to_words now supports the new ordinal keyword-only parameter, to produce ordinal strings instead of cardinal strings. (The number 1 as a cardinal string is 'one', but as an ordinal string is 'first').
Added the pure_virtual decorator to big.builtin.
The documentation is now much prettier! I finally discovered a syntax I can use to achieve a proper indent in Markdown, supported by both GitHub and PyPI. You simply nest the text you want indented inside an HTML description list as the description text, and skip the description item (<dl><dd>). Note that you need a blank line after the <dl><dd> line, or else Markdown will ignore the markup in the following paragraph. Thanks to Hugo van Kemenade for his help confirming this! Oh, and, Hugo also fixed the image markup so the big banner displays properly on PyPI. Thanks, Hugo!

0.9.2

released 2023/07/22

Extremely minor release. No new features or bug fixes.

Fixed coverage, now back to the usual 100%. (This just required changing the tests, which didn't find any new bugs.)
Made the tests for Log deterministic. They now use a fake clock that always returns the same values.
Added GitHub Actions integration. Tests and coverage are run in the cloud after every checkin. Thanks to Dan Pope for gently walking me through this!
Fixed metadata in the pyproject.toml file.
Added badges for testing, coverage, and supported Python versions.

0.9.1

released 2023/06/28

Added the new big.log module, with its new Log class! I wrote this for another project--but it turned out so nice I just had to add it to big!

0.9

released 2023/06/15

Bugfix! If an outer class Outer had an inner class Inner decorated with @BoundInnerClass, and o is an instance of Outer, and o evaluated to false in a boolean context, o.Inner would be the unbound version of Inner. Now it's the bound version, as is proper.
Modified tests/test_boundinnerclasses.py:
- Added regression test for the above bugfix (of course!).
- It now takes advantage of that newfangled "zero-argument super".
- Added testing of an unbound subclass of an unbound subclass.

0.8.3

released 2023/06/11

Added int_to_words.
All tests now insert the local big directory onto sys.path, so you can run the tests on your local copy without having to install. Especially convenient for testing with old versions of Python!

0.8.2

released 2023/05/19

Convert all iterator functions to use my new approach: instead of checking arguments inside the iterator, the function you call checks arguments, then has a nested iterator function which it runs and returns the result. This means bad inputs raise their exceptions at the call site where the iterator is constructed, rather than when the first value is yielded by the iterator!

0.8.1

released 2023/05/19

Added parse_delimiters (ed: now split_delimiters) and Delimiter.

0.8

released 2023/05/18

Major retooling of str and bytes support in big.text.
- Functions in big.text now uniformly accept str or bytes or a subclass of either. See the Support for bytes and str section for how it works.
- Functions in big.text are now more consistent about raising TypeError vs ValueError. If you mix bytes and str objects together in one call, you'll get a TypeError, but if you pass in an empty iterable (of a correct type) where a non-empty iterable is required you'll get a ValueError. big.text generally tries to give the TypeError higher priority; if you pass in a value that fails both the type check and the value check, the big.text function will raise TypeError first.
Major rewrite of re_rpartition. I realized it had the same "reverse mode" problem that I fixed in multisplit back in version 0.6.10: the regular expression should really search the string in "reverse mode", from right to left. The difference is whether the regular expression potentially matches against overlapping strings. When in forwards mode, the regular expression should prefer the leftmost overlapping match, but in reverse mode it should prefer the rightmost overlapping match. Most of the time this produces the same list of matches as you'd find searching the string forwards--but sometimes the matches come out very different. This was way harder to fix with re_rpartition than with multisplit, because Python's re module only supports searching forwards. I have to emulate reverse-mode searching by manually checking for overlapping matches and figuring out which one(s) to keep--a lot of work! Fortunately it's only a minor speed hit if you don't have overlapping matches. (And if you do have overlapping matches, you're probably just happy re_rpartition now produces correct results--though I did my best to make it performant anyway.) In the future, big will probably add support for the PyPI package regex, which reimplements Python's re module but adds many features... including reverse mode!
New function: reversed_re_finditer. Behaves almost identically to the Python standard library function re.finditer, yielding non-overlapping matches of pattern in string. The difference is, reversed_re_finditer searches string from right to left. (Written as part of the re_rpartition rewrite mentioned above.)
Added apostrophes, double_quotes, ascii_apostrophes, ascii_double_quotes, utf8_apostrophes, and utf8_double_quotes to the big.text module. Previously the first four of these were hard-coded strings inside gently_title. (And the last two didn't exist!)
Code cleanup in split_text_with_code, removed redundant code. I think it has about the same number of if statements; if anything it might be slightly faster.
Retooled re_partition and re_rpartition slightly, should now be very-slightly faster. (Well, re_rpartition will be slower if your pattern finds overlapping matches. But at least now it's correct!)
Lots and lots of doc improvements, as usual.

0.7.1

released 2023/03/13

Tweaked the implementation of multisplit. Internally, it does the string splitting using re.split, which returns a list. It used to iterate over the list and yield each element. But that meant keeping the entire list around in memory until multisplit exited. Now, multisplit reverses the list, pops off the final element, and yields that. This means multisplit drops all references to the split strings as it iterates over the string, which may help in low-memory situations.
Minor doc fixes.

0.7

released 2023/03/11

Breaking changes to the Scheduler:
- It's no longer thread-safe by default, which means it's much faster for non-threaded workloads.
- The lock has been moved out of the Scheduler object and into the Regulator. Among other things, this means that the Scheduler constructor no longer takes a lock argument.
- Regulator is now an abstract base class. big.scheduler also provides two concrete implementations: SingleThreadedRegulator and ThreadSafeRegulator.
- Regulator and Event are now defined in the big.scheduler namespace. They were previously defined inside the Scheduler class.
- The arguments to the Event constructor were rearranged. (You shouldn't care, as you shouldn't be manually constructing Event objects anyway.)
- The Scheduler now guarantees that it will only call now and wake on a Regulator object while holding that Regulator's lock.
Minor doc fixes.

0.6.18

released 2023/03/09

Retooled multisplit and multistrip argument verification code. Both functions now consistently check all their inputs, and use consistent error messages when raising an exception.

0.6.17

released 2023/03/09

Fixed a minor crashing bug in multisplit: if you passed in a list of separators (or separators was of any non-hashable type), and reverse was true, multisplit would crash. It used separators as a key into a dict, which meant separators had to be hashable.
multisplit now verifies that the s passed in is either str or bytes.
Lots of doc fixes.

0.6.16

released 2023/02/26

Fixed Python 3.6 support! Some equals-signs-in-f-strings and some other anachronisms had crept in. 0.6.16 has been tested on all versions from 3.6 to 3.11 (as well as having 100% coverage).
Made the dateutils package an optional dependency. Only one function needs it, parse_timestamp_3339Z().
Minor cleanup in PushbackIterator(). It also uses slots now, which should make it a bit faster.

0.6.15

released 2023/01/07

Added the new functions datetime_ensure_timezone(d, timezone) and datetime_set_timezone(d, timezone). These allow you to ensure or explicitly set a timezone on a datetime.datetime object.
Added the timezone argument to parse_timestamp_3339Z().
gently_title() now capitalizes the first letter after a left parenthesis.
Changed the secret multirpartition function slightly. Its reverse parameter now means to un-reverse its reversing behavior. Stated another way, multipartition(reverse=X) and multirpartition(reverse=not X) now do the same thing.

0.6.14

released 2022/12/11

Improved the text of the RuntimeError raised by TopologicalSorter.View when the view is incoherent. Now it tells you exactly what nodes are conflicting.
Expanded the deep dive on multisplit.

0.6.13

released 2022/12/11

Changed translate_filename_to_exfat(s) behavior: when modifying a string with a colon (':') not followed by a space, it used to convert it to a dash ('-'). Now it converts the colon to a period ('.'), which looks a little more natural. A colon followed by a space is still converted to a dash followed by a space.

0.6.12

tagged 2022/12/04

Bugfix: When calling TopologicalSorter.print(), it sorts the list of nodes, for consistency's sakes and for ease of reading. But if the node objects don't support < or > comparison, that throws an exception. TopologicalSorter.print() now catches that exception and simply skips sorting. (It's only a presentation thing anyway.)
Added a secret (otherwise undocumented!) function: multirpartition, which is like multipartition but with reverse=True.
Added the list of conflicted nodes to the "node is incoherent" exception text.

0.6.11

tagged 2022/11/13

Changed the import strategy. The top-level big module used to import all its child modules, and import * all the symbols from all those modules. But a friend (hi Mark Shannon!) talked me out of this. It's convenient, but if a user doesn't care about a particular module, why make them import it. So now the top-level big module contains nothing but a version number, and you can either import just the submodules you need, or you can import big.all to get all the symbols (like big itself used to do).

0.6.10

released 2022/10/26

All code changes had to do with multisplit:
- Fixed a subtle bug. When splitting with a separator that can overlap itself, like ' x ', multisplit will prefer the leftmost instance. But when reverse=True, it must prefer the rightmost instance. Thanks to Eric V. Smith for suggesting the clever "reverse everything, call re.split, and un-reverse everything" approach. That let me fix this bug while still implementing on top of re.split!
- Implemented PROGRESSIVE mode for the strip keyword. This behaves like str.strip: when splitting, strip on the left, then start splitting. If we don't exhaust maxsplit, strip on the right; if we do exhaust maxsplit, don't strip on the right. (Similarly for str.rstrip when reverse=True.)
- Changed the default for strip to False. It used to be NOT_SEPARATE. But this was too surprising--I'd forget that it was the default, and turning on keep wouldn't return everything I thought I should get, and I'd head off to debug multisplit, when in fact it was behaving as specified. The Principle Of Least Surprise tells me that strip defaulting to False is less surprising. Also, maintaining the invariant that all the keyword-only parameters to multisplit default to False is a helpful mnemonic device in several ways.
- Removed NOT_SEPARATE (and the not-yet-implemented STR_STRIP) modes for strip. They're easy to implement yourself, and this removes some surface area from the already-too-big multisplit API.
Modernized pyproject.toml metadata to make flit happier. This was necessary to ensure that pip install big also installs its dependencies.

0.6.8

released 2022/10/16

Renamed two of the three freshly-added lines modifier functions: lines_filter_contains is now lines_containing, and lines_filter_grep is now lines_grep.

0.6.7

released 2022/10/16

Added three new lines modifier functions to the text module: lines_filter_contains, lines_filter_grep, and lines_sort.
gently_title now accepts str or bytes. Also added the apostrophes and double_quotes arguments.

0.6.6

released 2022/10/14

Fixed a bug in multisplit. I thought when using keep=AS_PAIRS that it shouldn't ever emit a 2-tuple containing just empty strings--but on further reflection I've realized that that's correct. This behavior is now tested and documented, along with the reasoning behind it.
Added the reverse flag to re_partition.
whitespace_without_dos and newlines_without_dos still had the DOS end-of-line sequence in them! Oops!
- Added a unit test to check that. The unit test also ensures that whitespace, newlines, and all the variants (utf8_, ascii_, and _with_dos) exactly match the set of characters Python considers whitespace and newline characters.
Lots more documentation and formatting fixes.

0.6.5

released 2022/10/13

Added the new itertools module, which so far only contains PushbackIterator.
Added lines_strip_comments [ed: now lines_strip_line_comments and split_quoted_strings to the text module.

0.6.1

released 2022/10/13

I realized that whitespace should contain the DOS end-of-line sequence ('\r\n'), as it should be considered a single separator when splitting etc. I added that, along with whitespace_no_dos, and naturally utf8_whitespace_no_dos and ascii_whitespace_no_dos too.
Minor doc fixes.

0.6

released 2022/10/13

A big upgrade!

Completely retooled and upgraded multisplit, and added multistrip and multipartition, collectively called The multi- family of string functions. (Thanks to Eric Smith for suggesting multipartition! Well, sort of.)
- [multisplit](#multisplits-separatorsnone--keepfalse-maxsplit-1-reversefalse-separatefalse-stripfalse) now supports five (!) keyword-only parameters, allowing the caller to tune its behavior to an amazing degree.
- Also, the original implementation of [multisplit](#multisplits-separatorsnone--keepfalse-maxsplit-1-reversefalse-separatefalse-stripfalse) got its semantics a bit wrong; it was inconsistent and maybe a little buggy.
- multistrip is like str.strip but accepts an iterable of separator strings. It can strip from the left, right, both, or neither (in which case it does nothing).
- multipartition is like str.partition, but accepts an iterable of separator strings. It can also partition more than once, and supports reverse=True which causes it to partition from the right (like str.rpartition).
- Also added useful predefined lists of separators for use with all the multi functions: whitespace and newlines, with ascii_ and utf8_ versions of each, and without_dos variants of all three newlines variants.
Added the Scheduler and Heap classes. Scheduler is a replacement for Python's sched.scheduler class, with a modernized interface and a major upgrade in functionality. Heap is an object-oriented interface to Python's heapq module, used by Scheduler. These are in their own modules, big.heap and big.scheduler.
Added lines and all the lines_ modifiers. These are great for writing little text parsers. For more information, please see the deep-dive on lines and lines modifier functions.
Removedstripped_lines and rstripped_lines from the text module, as they're superceded by the far superior lines family.
Enhanced normalize_whitespace. Added the separators and replacement parameters, and added support for bytes objects.
Added the count parameter to re_partition and re_rpartition.

0.5.2

released 2022/09/12

Added stripped_lines and rstripped_lines to the text module.
Added support for len to the TopologicalSorter object.

0.5.1

released 2022/09/04

Added gently_title and normalize_whitespace to the text module.
Changed translate_filename_to_exfat to handle translating ':' in a special way. If the colon is followed by a space, then the colon is turned into ' -'. This yields a more natural translation when colons are used in text, e.g. 'xXx: The Return Of Xander Cage' is translated to 'xXx - The Return Of Xander Cage'. If the colon is not followed by a space, turns the colon into '-'. This is good for tiresome modern gobbledygook like 'Re:code', which will now be translated to 'Re-code'.

0.5

released 2022/06/12

Initial release.

Project details

These details have not been verified by PyPI

Project links

Source

Release history Release notifications | RSS feed

0.12.4

Nov 15, 2024

This version

0.12.3

Sep 18, 2024

0.12.2

Sep 12, 2024

0.12.1

Sep 8, 2024

0.12

Sep 6, 2024

0.11

Sep 19, 2023

0.10

Sep 4, 2023

0.9.2

Jul 21, 2023

0.9.1

Jun 28, 2023

0.9

Jun 16, 2023

0.8.3

Jun 12, 2023

0.8.2

May 19, 2023

0.8.1

May 19, 2023

0.8

May 18, 2023

0.7.1

Mar 13, 2023

0.7

Mar 11, 2023

0.6.18

Mar 9, 2023

0.6.17

Mar 9, 2023

0.6.16

Feb 27, 2023

0.6.15

Jan 8, 2023

0.6.14

Dec 12, 2022

0.6.13

Dec 6, 2022

0.6.12

Dec 4, 2022

0.6.11

Nov 14, 2022

0.6.10

Oct 27, 2022

0.6.8

Oct 16, 2022

0.6.7

Oct 16, 2022

0.6.6

Oct 15, 2022

0.6.5

Oct 14, 2022

0.6.1

Oct 13, 2022

0.6

Oct 13, 2022

0.5.2

Sep 11, 2022

0.5.1

Sep 3, 2022

0.5

Jun 12, 2022

Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

big-0.12.3.tar.gz (4.9 MB view details)

Uploaded Sep 18, 2024 Source

Built Distribution

big-0.12.3-py3-none-any.whl (159.6 kB view details)

Uploaded Sep 18, 2024 Python 3

File details

Details for the file big-0.12.3.tar.gz.

File metadata

Download URL: big-0.12.3.tar.gz
Upload date: Sep 18, 2024
Size: 4.9 MB
Tags: Source
Uploaded using Trusted Publishing? No
Uploaded via: python-requests/2.31.0

File hashes

Hashes for big-0.12.3.tar.gz
Algorithm	Hash digest
SHA256	`1243716b32b52eb5b85333fef8758034eea38bf457374966386d1f650a484b57`
MD5	`48b26299aa197a669e2131b95310f598`
BLAKE2b-256	`59224d6f00475eaa7aa78c843e4139d7a09089fbd16322dc97242d1de6dbfa09`

See more details on using hashes here.

File details

Details for the file big-0.12.3-py3-none-any.whl.

File metadata

Download URL: big-0.12.3-py3-none-any.whl
Upload date: Sep 18, 2024
Size: 159.6 kB
Tags: Python 3
Uploaded using Trusted Publishing? No
Uploaded via: python-requests/2.31.0

File hashes

Hashes for big-0.12.3-py3-none-any.whl
Algorithm	Hash digest
SHA256	`bb538dc8d836ef4f98046e7fcd69654a426cfb4e5fe166555ac0e5d5408698d5`
MD5	`95207a325657cf417959b324d2390926`
BLAKE2b-256	`7c04f808cc033571e4a2f338dea01f5a07c711acb751eef0cf0c16b45135ee72`

See more details on using hashes here.

big 0.12.3

Navigation

Verified details

Maintainers

Unverified details

Project links

Meta

Classifiers

Project description

Copyright 2022-2024 by Larry Hastings

Why use big?

Using big

The best of big

Index

Modules

Functions, classes, and values

Topic deep-dives

API Reference, By Module

big.all

big.boundinnerclass

BoundInnerClass(cls)

UnboundInnerClass(cls)

big.builtin

get_float(o, default=_sentinel)

get_int(o, default=_sentinel)

get_int_or_float(o, default=_sentinel)

pure_virtual()

try_float(o)

try_int(o)

big.deprecated

big.file

fgrep(path, text, *, encoding=None, enumerate=False, case_insensitive=False)

file_mtime(path)

file_mtime_ns(path)

file_size(path)

grep(path, pattern, *, encoding=None, enumerate=False, flags=0)

pushd(directory)

safe_mkdir(path)

safe_unlink(path)

touch(path)

translate_filename_to_exfat(s)

translate_filename_to_unix(s)

big.graph

CycleError()

TopologicalSorter(graph=None)

TopologicalSorter.copy()

TopologicalSorter.cycle()

TopologicalSorter.print(print=print)

TopologicalSorter.remove(node)

TopologicalSorter.reset()

TopologicalSorter.view()

TopologicalSorter.View

TopologicalSorter.View.__bool__()

TopologicalSorter.View.close()

TopologicalSorter.View.copy()

TopologicalSorter.View.done(*nodes)

TopologicalSorter.View.print(print=print)

TopologicalSorter.View.ready()

TopologicalSorter.View.reset()

big.heap

Heap(i=None)

Heap.append(o)

Heap.clear()

Heap.copy()

Heap.extend(i)

Heap.remove(o)

Heap.popleft()

Heap.append_and_popleft(o)

Heap.popleft_and_append(o)

Heap.queue

big.itertools

PushbackIterator(iterable=None)

PushbackIterator.next(default=None)

PushbackIterator.push(o)

big.log

default_clock()

Log(*, clock=None)

Log.enter(subsystem)

Log.exit()

Log.print(*, print=None, title="[event log]", headings=True, indent=2, seconds_width=2, fractional_width=9)

`big.all`

`big.boundinnerclass`

`BoundInnerClass(cls)`

`UnboundInnerClass(cls)`

`big.builtin`

`get_float(o, default=_sentinel)`

`get_int(o, default=_sentinel)`

`get_int_or_float(o, default=_sentinel)`

`pure_virtual()`

`try_float(o)`

`try_int(o)`

`big.deprecated`

`big.file`

`fgrep(path, text, *, encoding=None, enumerate=False, case_insensitive=False)`

`file_mtime(path)`

`file_mtime_ns(path)`

`file_size(path)`

`grep(path, pattern, *, encoding=None, enumerate=False, flags=0)`

`pushd(directory)`

`safe_mkdir(path)`

`safe_unlink(path)`

`touch(path)`

`translate_filename_to_exfat(s)`

`translate_filename_to_unix(s)`

`big.graph`

`CycleError()`

`TopologicalSorter(graph=None)`

`TopologicalSorter.copy()`

`TopologicalSorter.cycle()`

`TopologicalSorter.print(print=print)`

`TopologicalSorter.remove(node)`

`TopologicalSorter.reset()`

`TopologicalSorter.view()`

`TopologicalSorter.View`

`TopologicalSorter.View.bool()`

`TopologicalSorter.View.close()`

`TopologicalSorter.View.copy()`

`TopologicalSorter.View.done(*nodes)`

`TopologicalSorter.View.print(print=print)`

`TopologicalSorter.View.ready()`

`TopologicalSorter.View.reset()`

`big.heap`

`Heap(i=None)`

`Heap.append(o)`

`Heap.clear()`

`Heap.copy()`

`Heap.extend(i)`

`Heap.remove(o)`

`Heap.popleft()`

`Heap.append_and_popleft(o)`

`Heap.popleft_and_append(o)`

`Heap.queue`

`big.itertools`

`PushbackIterator(iterable=None)`

`PushbackIterator.next(default=None)`

`PushbackIterator.push(o)`

`big.log`

`default_clock()`

`Log(*, clock=None)`

`Log.enter(subsystem)`

`Log.exit()`

`Log.print(*, print=None, title="[event log]", headings=True, indent=2, seconds_width=2, fractional_width=9)`

`Log.reset()`

`big.metadata`

`metadata.version`

`big.scheduler`

`Event(scheduler, event, time, priority, sequence)`

`Event.cancel()`

`Regulator()`

`Regulator.lock`

`Regulator.now()`

`Regulator.sleep(t)`

`Regulator.wake()`

`Scheduler(regulator=default_regulator)`

`Scheduler.schedule(o, time, *, absolute=False, priority=DEFAULT_PRIORITY)`

`Scheduler.cancel(event)`

`Scheduler.queue`

`Scheduler.non_blocking()`

`SingleThreadedRegulator()`

`ThreadSafeRegulator()`