blessings 1.1

Simple Formatting

Lots of handy formatting codes (“capabilities” in low-level parlance) are available as attributes on Terminal instances. For example:

from blessings import Terminal

term = Terminal()
print 'I am ' + term.bold + 'bold' + term.normal + '!'

Or you can use them as wrappers so you don’t have to say normal afterward:

print 'I am', term.bold('bold') + '!'

Simple capabilities of interest include…

• bold

• reverse

• underline

• no_underline (which turns off underlining)

• blink

• normal (which turns off everything, even colors)

• clear_eol (clear to the end of the line)

• clear_bol (clear to beginning of line)

• clear_eos (clear to end of screen)

Here are a few more which are less likely to work on all terminals:

• dim

• italic and no_italic

• shadow and no_shadow

• standout and no_standout

• subscript and no_subscript

• superscript and no_superscript

• flash (which flashes the screen once)

Note that, while the inverse of underline is no_underline, the only way to turn off bold or reverse is normal, which also cancels any custom colors. This is because there’s no way to tell the terminal to undo certain pieces of formatting, even at the lowest level.

You might notice that the above aren’t the typical incomprehensible terminfo capability names; we alias a few of the harder-to-remember ones for readability. However, you aren’t limited to these: you can reference any string-returning capability listed on the terminfo man page by the name under the “Cap-name” column: for example, term.rum.

Color

16 colors, both foreground and background, are available as easy-to-remember attributes:

from blessings import Terminal

term = Terminal()
print term.red + term.on_green + 'Red on green? Ick!' + term.normal
print term.bright_red + term.on_bright_blue + 'This is even worse!' + term.normal

You can also call them as wrappers, which sets everything back to normal at the end:

print term.red_on_green('Red on green? Ick!')
print term.yellow('I can barely see it.')

The available colors are…

• black

• red

• green

• yellow

• blue

• magenta

• cyan

• white

As hinted above, there is also a bright version of each. If your terminal does not support the bright palette, it will usually render them as black.

You can set the background color instead of the foreground by prepending on_, as in on_blue or on_bright_white.

There is also a numerical interface to colors, which takes integers from 0-15:

term.color(5) + 'Hello' + term.normal
term.on_color(3) + 'Hello' + term.normal

Compound Formatting

If you want to do lots of crazy formatting all at once, you can just mash it all together:

from blessings import Terminal

term = Terminal()
print term.bold_underline_green_on_yellow + 'Woo' + term.normal

Or you can use your newly coined attribute as a wrapper, which implicitly sets everything back to normal afterward:

print term.bold_underline_green_on_yellow('Woo')

This compound notation comes in handy if you want to allow users to customize the formatting of your app: just have them pass in a format specifier like “bold_green” on the command line, and do a quick getattr(term, that_option)('Your text') when you do your formatting.

I’d be remiss if I didn’t credit couleur, where I probably got the idea for all this mashing.

Parametrized Capabilities

Some capabilities take parameters. Rather than making you dig up tparm() all the time, we simply make such capabilities into callable strings. You can pass the parameters right in:

from blessings import Terminal

term = Terminal()
print term.move(10, 1)

Here are some of interest:

move

Position the cursor elsewhere. Parameters are y coordinate, then x coordinate.

move_x

Move the cursor to the given column.

move_y

Move the cursor to the given row.

You can also reference any other string-returning capability listed on the terminfo man page by its name under the “Cap-name” column.

Height and Width

It’s simple to get the height and width of the terminal, in characters:

from blessings import Terminal

term = Terminal()
height = term.height
width = term.width

These are newly updated each time you ask for them, so they’re safe to use from SIGWINCH handlers.

Temporary Repositioning

Sometimes you need to flit to a certain location, print something, and then return: for example, when updating a progress bar at the bottom of the screen. Terminal provides a context manager for doing this concisely:

from blessings import Terminal

term = Terminal()
with term.location(0, term.height):
    print 'Here is the bottom.'
print 'This is back where I came from.'

Parameters to location() are x and then y, but you can also pass just one of them, leaving the other alone. For example…

with term.location(y=10):
    print 'We changed just the row.'

If you want to reposition permanently, see move, in an example above.

Pipe Savvy

If your program isn’t attached to a terminal, like if it’s being piped to another command or redirected to a file, all the capability attributes on Terminal will return empty strings. You’ll get a nice-looking file without any formatting codes gumming up the works.

If you want to override this–like if you anticipate your program being piped through less -r, which handles terminal escapes just fine–pass force_styling=True to the Terminal constructor.

In any case, there is an is_a_tty attribute on Terminal that lets you see whether the attached stream seems to be a terminal. If it’s false, you might refrain from drawing progress bars and other frippery, since you’re apparently headed into a pipe:

from blessings import Terminal

term = Terminal()
if term.is_a_tty:
    with term.location(0, term.height):
        print 'Progress: [=======>   ]'
print term.bold('Important stuff')