blight

blight is a framework for wrapping and instrumenting build tools and build systems. It contains:

1. A collection of high-fidelity models for various common build tools (e.g. the C and C++ compilers, the standard linker, the preprocessor, etc.);
2. A variety of "actions" that can be run on each build tool or specific classes of tools (e.g. "whenever the build system invokes $CC, add this flag");
3. Command-line wrappers (blight-env and blight-exec) for instrumenting builds.

• Installation
• Usage
• Quickstart
• Cookbook
• Goals
• Anti-goals
• Contributing

Installation

blight is available on PyPI and is installable via pip:

python -m pip install blight

Python 3.7 or newer is required.

Usage

blight comes with two main entrypoints:

• blight-exec: directly execute a command within a blight-instrumented environment
• blight-env: write a sh-compatible environment definition to stdout, which the shell or other tools can consume to enter a blight-instrumented environment

In most cases, you'll probably want blight-exec. blight-env can be thought of as the "advanced" or "plumbing" interface.

Usage: blight-exec [OPTIONS] TARGET [ARGS]...

Options:
  --guess-wrapped      Attempt to guess the appropriate programs to wrap
  --swizzle-path       Wrap via PATH swizzling
  --stub STUB          Stub a command out while swizzling
  --shim SHIM          Add a custom shim while swizzling
  --action ACTION      Enable an action
  --journal-path PATH  The path to use for action journaling
  --help               Show this message and exit.

Usage: blight-env [OPTIONS]

Options:
  --guess-wrapped  Attempt to guess the appropriate programs to wrap
  --swizzle-path   Wrap via PATH swizzling
  --stub TEXT      Stub a command out while swizzling
  --shim TEXT      Add a custom shim while swizzling
  --unset          Unset the tool variables instead of setting them
  --help           Show this message and exit.

Quickstart

The easiest way to get started with blight is to use blight-exec with --guess-wrapped and --swizzle-path. These flags tell blight to configure the environment with some common-sense defaults:

• --guess-wrapped: guess the appropriate underlying tools to invoke from the current PATH and other runtime environment;
• --swizzle-path: rewrite the PATH to put some common build tool shims first, e.g. redirecting cc to blight-cc.

For example, the following will run cc -v under blight's instrumentation, with the Demo action:

blight-exec --action Demo --swizzle-path --guess-wrapped -- cc -v

which should produce something like:

[demo] before-run: /usr/bin/cc
Apple clang version 14.0.0 (clang-1400.0.29.202)
Target: x86_64-apple-darwin22.2.0
Thread model: posix
InstalledDir: /Library/Developer/CommandLineTools/usr/bin
[demo] after-run: /usr/bin/cc

We can also see the effect of --swizzle-path by running which cc under blight, and observing that it points to a temporary shim rather than the normal cc location:

$ blight-exec --swizzle-path --guess-wrapped -- which cc
/var/folders/zj/hy934vnj5xs68zv6w4b_f6s40000gn/T/tmp5uahp6tg@blight-swizzle@/cc

$ which cc
/usr/bin/cc

All the Demo action does is print a message before and after each tool run, allowing you to diagnose when a tool is or isn't correctly instrumented. See the actions documentation below for information on using and configuring more interesting actions.

Cookbook

Running blight against a make-based build

Most make-based builds use $(CC), $(CXX), etc., which means that they should work out of the box with blight-exec:

blight-exec --guess-wrapped -- make

In some cases, poorly written builds may hard-code cc, clang, gcc, etc. rather than using their symbolic counterparts. For these, you can use --swizzle-path to interpose shims that redirect those hardcoded tool invocations back to blight's wrappers:

blight-exec --guess-wrapped --swizzle-path -- make

See Taming an uncooperative build with shims and stubs for more advanced techniques for dealing with poorly written build systems.

Enabling actions

Actions are where blight really shines: they allow you to run arbitrary Python code before and after each build tool invocation.

blight comes with built-in actions, which are documented here. See each action's Python module for its documentation.

Actions can be enabled in two different ways:

• With the --action flag, which can be passed multiple times. For example, --action SkipStrip --action Record enables both the SkipStrip and Record actions.

• With the BLIGHT_ACTIONS environment variable, which can take multiple actions delimited by :. For example, BLIGHT_ACTIONS=SkipStrip:Record is equivalent to --action SkipStrip --action Record.

Actions are run in the order of specification with duplicates removed, meaning that BLIGHT_ACTIONS=Foo:Bar:Foo is equivalent to BLIGHT_ACTIONS=Foo:Bar but not BLIGHT_ACTIONS=Bar:Foo. This is important if actions have side effects, which they may (such as modifying the tool's flags).

Action configuration

Some actions accept or require additional configuration, which is passed through the BLIGHT_ACTION_{ACTION} environment variable in key=value format, where {ACTION} is the uppercased name of the action.

For example, to configure Record's output file:

BLIGHT_ACTION_RECORD="output=/tmp/output.jsonl"

Action outputs

There are two ways to get output from actions under blight:

• Many actions support an output configuration value, which should be a filename to write to. This allows each action to write its own output file.
• blight supports a "journaling" mode, in which all action outputs are written to a single file, keyed by action name.

The "journaling" mode is generally encouraged over individual outputs, and can be enabled with either BLIGHT_JOURNAL_PATH=/path/to/output.jsonl in the environment or blight-exec --journal-path /path/to/output.jsonl.

Configuring an environment with blight-env

blight-env behaves exactly the same as blight-exec, except that it stops before actually executing anything. You can use it to set up an environment for use across multiple build system runs.

By default, blight-env will just export the appropriate environment for replacing CC, etc., with their blight wrappers:

$ blight-env
export CC=blight-cc
export CXX=blight-c++
export CPP=blight-cpp
export LD=blight-ld
export AS=blight-as
export AR=blight-ar
export STRIP=blight-strip
export INSTALL=blight-install

--guess-wrapped augments this by adding a best-guess underlying tool for each wrapper:

$ blight-env --guess-wrapped
export BLIGHT_WRAPPED_CC=/usr/bin/cc
export BLIGHT_WRAPPED_CXX=/usr/bin/c++
export BLIGHT_WRAPPED_CPP=/usr/bin/cpp
export BLIGHT_WRAPPED_LD=/usr/bin/ld
export BLIGHT_WRAPPED_AS=/usr/bin/as
export BLIGHT_WRAPPED_AR=/usr/bin/ar
export BLIGHT_WRAPPED_STRIP=/usr/bin/strip
export BLIGHT_WRAPPED_INSTALL=/usr/bin/install
export CC=blight-cc
export CXX=blight-c++
export CPP=blight-cpp
export LD=blight-ld
export AS=blight-as
export AR=blight-ar
export STRIP=blight-strip
export INSTALL=blight-install

--guess-wrapped also respects CC, etc. in the environment:

$ CC=/some/custom/cc blight-env --guess-wrapped
export BLIGHT_WRAPPED_CC=/some/custom/cc
export BLIGHT_WRAPPED_CXX=/usr/bin/c++
export BLIGHT_WRAPPED_CPP=/usr/bin/cpp
export BLIGHT_WRAPPED_LD=/usr/bin/ld
export BLIGHT_WRAPPED_AS=/usr/bin/as
export BLIGHT_WRAPPED_AR=/usr/bin/ar
export BLIGHT_WRAPPED_STRIP=/usr/bin/strip
export BLIGHT_WRAPPED_INSTALL=/usr/bin/install
export CC=blight-cc
export CXX=blight-c++
export CPP=blight-cpp
export LD=blight-ld
export AS=blight-as
export AR=blight-ar
export STRIP=blight-strip
export INSTALL=blight-install

--swizzle-path further modifies the environment by rewriting PATH:

$ blight-env --guess-wrapped-swizzle-path
export BLIGHT_WRAPPED_CC=/usr/bin/cc
export BLIGHT_WRAPPED_CXX=/usr/bin/c++
export BLIGHT_WRAPPED_CPP=/usr/bin/cpp
export BLIGHT_WRAPPED_LD=/usr/bin/ld
export BLIGHT_WRAPPED_AS=/usr/bin/as
export BLIGHT_WRAPPED_AR=/usr/bin/ar
export BLIGHT_WRAPPED_STRIP=/usr/bin/strip
export BLIGHT_WRAPPED_INSTALL=/usr/bin/install
export PATH='/var/folders/zj/hy934vnj5xs68zv6w4b_f6s40000gn/T/tmpxh5ryu22@blight-swizzle@:/bin:/usr/bin:/usr/local/bin'
export CC=blight-cc
export CXX=blight-c++
export CPP=blight-cpp
export LD=blight-ld
export AS=blight-as
export AR=blight-ar
export STRIP=blight-strip
export INSTALL=blight-install

The swizzled addition can be identified by its @blight-swizzle@ directory name.

Taming an uncooperative build with shims and stubs

Sometimes build systems need more coaxing than just --guess-wrapped and --swizzle-path. Common examples include:

• Hard-coding a particular tool or tool version rather than using the symbolic name (e.g. clang-7 example.c instead of $(CC) example.c);
• Running lots of "junk" commands that can be suppressed (e.g. lots of echo invocations)

You can use shims and stubs to smooth out these cases:

• shims replace a command with a build tool that blight knows about, e.g. clang-3.8 with cc.
• stubs replace a command with an invocation of true, meaning that it does nothing and never fails.

Shims are specified with --shim cmd:tool, while stubs are specified with --stub cmd. Both require --swizzle-path, since the PATH must be rewritten to inject additional commands.

For example, to instrument a build system that hardcodes tcc everywhere and that spews way too much output with echo:

blight-exec --guess-wrapped --swizzle-path --shim tcc:cc --stub echo -- make

Goals

• Wrapping CC, CXX, CPP, LD, AS, AR, STRIP, and INSTALL.
• Providing a visitor-style API for each of the above, pre- and post-execution.
• Providing a nice set of default actions.
• Being as non-invasive as possible.

Anti-goals

• Using LD_PRELOAD to capture every exec in a build system, a la Bear.
• Supporting cl.exe.
• Detailed support for non C/C++ languages.

Contributing

Check out our CONTRIBUTING.md!