bucky 0.0.12

Bucky
-----

Bucky is a small server for collecting and translating metrics for
Graphite. It can current collect metric data from CollectD daemons
and from StatsD clients.

Installation
------------

You can install with `easy_install` or `pip` as per normal modus
operandi::

$ easy_install bucky
# or
$ pip install bucky

After installing, you can run Bucky like::

$ bucky

By default, Bucky will open a CollectD UDP socket on 127.0.0.1:25826,
a StatsD socket on 127.0.0.1:8125 as well as attempt to connect to a
local Graphite (Carbon) daemon on 127.0.0.1:2003.

These are all optional as illustrated below. You can also disable the
CollectD or StatsD servers completely if you so desire.

Running Bucky For Real
----------------------

The astute observer will notice that Bucky has no flags for
daemonization. This is quite on purpose. The recommended way to
run Bucky in production is via runit. There's an example service
directory in Bucky's source repository.

Command Line Options
--------------------

The command line options are limited to controlling the network
parameters. If you want to configure some of the more intricate
workings you'll need to use a config file. Here's the `bucky -h`
output::

Usage: main.py [OPTIONS] [CONFIG_FILE]

Options:
--debug Put server into debug mode. [False]
--metricsd-ip=IP IP address to bind for the MetricsD UDP socket
[127.0.0.1]
--metricsd-port=INT Port to bind for the MetricsD UDP socket [23632]
--disable-metricsd Disable the MetricsD UDP server
--collectd-ip=IP IP address to bind for the CollectD UDP socket
[127.0.0.1]
--collectd-port=INT Port to bind for the CollectD UDP socket [25826]
--collectd-types=FILE
Path to the collectd types.db file, can be specified
multiple times
--disable-collectd Disable the CollectD UDP server
--statsd-ip=IP IP address to bind for the StatsD UDP socket
[127.0.0.1]
--statsd-port=INT Port to bind for the StatsD UDP socket [8125]
--disable-statsd Disable the StatsD server
--graphite-ip=IP IP address of the Graphite/Carbon server [127.0.0.1]
--graphite-port=INT Port of the Graphite/Carbon server [2003]
--full-trace Display full error if config file fails to load
--log-level=NAME Logging output verbosity [INFO]
--version show program's version number and exit
-h, --help show this help message and exit


Config File Options
-------------------

The configuration file is a normal Python file that defines a number of
variables. Most of command line options can also be specified in this
file (remove the "--" prefix and replace "-" with "_") but if specified
in both places, the command line takes priority. The defaults as a
config file::


# Standard debug and log level
debug = False
log_level = "INFO"

# Whether to print the entire stack trace for errors encountered
# when loading the config file
full_trace = False

# Basic metricsd conifguration
metricsd_ip = "127.0.0.1"
metricsd_port = 23632
metricsd_enabled = True

# The default interval between flushes of metric data to Graphite
metricsd_default_interval = 10.0

# You can specify the frequency of flushes to Graphite based on
# the metric name used for each metric. These are specified as
# regular expressions. An entry in this list should be a 3-tuple
# that is: (regexp, frequency, priority)
#
# The regexp is applied with the match method. Frequency should be
# in seconds. Priority is used to break ties when a metric name
# matches more than one handler. (The largest priority wins)
metricsd_handlers = []

# Basic collectd configuration
collectd_ip = "127.0.0.1"
collectd_port = 25826
collectd_enabled = True

# A list of file names for collectd types.db
# files.
collectd_types = []

# A mapping of plugin names to converter callables. These are
# explained in more detail in the README.
collectd_converters = {}

# Whether to load converters from entry points. The entry point
# used to define converters is 'bucky.collectd.converters'.
collectd_use_entry_points = True

# Basic statsd configuration
statsd_ip = "127.0.0.1"
statsd_port = 8125
statsd_enabled = True

# How often stats should be flushed to Graphite.
statsd_flush_time = 10.0

# Basic Graphite configuration
graphite_ip = "127.0.0.1"
graphite_port = 2003

# If the Graphite connection fails these numbers define how it
# will reconnect. The max reconnects applies each time a
# disconnect is encountered and the reconnect delay is the time
# in seconds between connection attempts. Setting max reconnects
# to a negative number removes the limit.
graphite_max_reconnects = 3
graphite_reconnect_delay = 5

# Bucky provides these settings to allow the system wide
# configuration of how metric names are processed before
# sending to Graphite.
#
# Prefix and postfix allow to tag all values with some value.
name_prefix = None
name_postfix = None

# The replacement character is used to munge any '.' characters
# in name components because it is special to Graphite. Setting
# this to None will prevent this step.
name_replace_char = '_'

# Optionally strip duplicates in path components. For instance
# a.a.b.c.c.b would be rewritten as a.b.c.b
name_strip_duplicates = True

# Bucky reverses hostname components to improve the locality
# of metric values in Graphite. For instance, "node.company.tld"
# would be rewritten as "tld.company.node". This setting allows
# for the specification of hostname components that should
# be stripped from hostnames. For instance, if "company.tld"
# were specified, the previous example would end up as "node".
name_host_trim = []


Configuring CollectD
--------------------

You should only need to add something like this to your collectd.conf::

LoadPlugin "network"

<Plugin "network">
Server "127.0.0.1" "25826"
</Plugin>

Obviously, you'll want to match up the IP addresses and ports and make
sure that your firewall's are configured to allow UDP packets through.


Configuring StatsD
------------------

Just point your StatsD clients at Bucky's IP/Port and you should be
good to go.


Configuring MetricsD
------------------

TODO


A note on CollectD converters
-----------------------------

CollectD metrics aren't exactly directly translatable to Graphite
metric names. The default translator attempts to make a best guess
but this can result in slightly less than pretty Graphite trees.

For this reason, Bucky has configurable converters. These are
keyed off the CollectD plugin name. The input to these functions is
a representation of the CollectD metric that looks like such::

{
'host': 'toroid.local',
'interval': 10.0,
'plugin': 'memory',
'plugin_instance': '',
'time': 1320970329.175534,
'type': 'memory',
'type_instance': 'inactive',
'value': 823009280.0,
'value_name': 'value',
'value_type': 1
}

The result of this function should be a list of strings that represent
part of the Graphite metric name or `None` to drop sample
entirely. For instance, if a converter returned `["foo", "bar"]`, the
final metric name will end up as:
`$prefix.$hostname.foo.bar.$postfix`.

An example builtin converter looks like such::

# This might be how you define a converter in
# your config file

class MemoryConverter(object):
PRIORITY = 0
def __call__(self, sample):
return ["memory", sample["type_instance"]]

collectd_converters = {"memory": MemoryConverter()}

Converters can either be declared and/or imported in the optional
config file, or they can be autodiscovered via entry points. The
entry point that is searched is "bucky.collectd.converters". The
entry point name should be the CollectD plugin name.

`collectd_converters` in config file should be a mapping of collectd
plugin name to converter instance. The default catch-all converter
(used when no special converter is defined for a plugin) can be
overidden by specifying `_default` as the plugin name.

Converters also have a notion of priority in order to resolve
conflicts. This is merely a property on the callable named
"PRIORITY" and larger priorities are preferred. I don't imagine
this will need to be used very often, but its there just in
case.