The product will allow you to apply an easyslider to any page with the ability to create each slide using a WYSIWYG editor. It also provides a slider view for Folders and Collections.
Project description
Introduction
============
This product allows you to easily add an easySlider content rotator to any page on a plone site using a WYSIWYG editor to design each slide.
How-to
------
On a page, click actions -> Add Slider. It should bring you to a slider settings page where you can modify different aspects of the slider and add/remove slides using a WYSWGY editor. Keep in mind that the slides are fixed width so you need to specify the size you want. Then you'll want to start adding your slides. To do this just click ``add new slide`` near the bottom of the page. Once you've finished adding slides and re-ordering slides, click ``save`` and you should see the slider on your page now.
You can also select a slider view for Folder and Collection content types. Then the slider settings for that page will include settings to limit the amount of slides to have and to limit the type of slides used.
Examples
--------
Examples of this being used in the wild.
* http://www.fbi.gov/
* http://www.chicagohistory.org
* http://www.reamp.org
* http://www.rehabpro.org
* http://swca.org/
Installation
------------
* add collective.easyslider to your eggs and zcml sections
* re-run buildout
* install the product like you would any other Plone product
Uninstall
---------
* Uninstall like normal
* go to portal_setup in the zmi, click the 'import' tab, select "collective.easyslider uninstall" and click the "Import all steps" button at the bottom to perform clean up.
Easy Template Integration
-------------------------
If you'd like to add dynamic content to your slides, add collective.easytemplate
to your eggs section in buildout, re-run buildout and restart your installation.
Then in the slider settings make sure you enable Easy Template.
You can also render sliders in a Easy Template. The syntax is:
{{ slider("../front-page") }}
And for the sliderview
{{ sliderview("../a-collection") }}
Rendering Slider in Templates
-----------------------------
You can also easily render your slider in a page template
if you'd like even more control over how it is displayed:
<tal:slider tal:content="structure context/../front-page/@@slider_util/render_inline" />
And for the sliderview
<tal:slider tal:content="structure context/../front-page/@@slider_util/render_sliderview_inline" />
Credits and Contributions
-------------------------
* a lot of the credit for the inspiration, styling and insight into this product belongs to Espen Moe-Nilssen
Changelog
=========
1.3.2 (2013-02-06)
------------------
- look at parent object if context is not anonatable.
this will fix plone.app.event sub events breaking.
[vangheem]
1.3.1 (2013-02-05)
------------------
- fix import if plone.app.collection is not installed
[vangheem]
1.3.0 (2013-02-02)
------------------
- support new style collections with sliderview
[ableeb]
1.2.0 (2013-01-16)
------------------
- be consistent with Anysurfer
XXX HTML markup has changed slightly so please
test any style customizations when upgrading.
[smoussiaux]
1.1.1 (2012-10-20)
------------------
- add zcml include to fix startup issues in some
Plone 4.2 setups.
[zopyx]
1.1 (2012-09-19)
----------------
- Add global configuration
[zombified]
1.0 (2012-04-25)
----------------
- allow original scale for slider view
[vangheem]
- add pause on hover option
[espen]]
0.8.1b1 (2012-02-16)
--------------------
- Add randomize feature
[vangheem]
- allow drag n drop reordering of slides
[vangheem]
0.8.0b2 (2012-02-15)
--------------------
- Ensure that users with the Site Administrator role can edit slider settings
under Plone 4.1+.
[davidjb]
- Fix failing test under Plone 3.
[davidjb]
- Remove bottom border for navigation bullets under <= IE6.
[davidjb]
- Allow active navigation bullets to change on slide transition under new
*Navigation Bullets* layout.
[davidjb]
- Added a new layout with bullets.
[espenmn]
- Ensure slider JS selects only ``li`` elements that are slides. This fixes
transition problems when lists are within slides.
[davidjb]
- Fix IE 5/6 display issue with slider container showing overflow.
[davidjb]
- Return an error if the user's attempt to move/remove a slide fails.
This prevents unnecessary AJAX calls from the client to reload slides.
[davidjb]
- Prevent index out of range error when attempting to move a slide down
if that slide is already at the end.
[davidjb]
- Simplify CSS for settings page as existing slider styles are now applicable.
[davidjb]
- Change slider settings page to ensure that ``li`` slide elements are
correctly wrapped in a ``ul`` by mimicking actual slider structures. This
fixes settings page issues under IE 6 and 7 by ensuring the page produces
valid list markup.
[davidjb]
- Add CSS class selectors for slider and slider containers rather than just
ID-based selectors. This allows multiple slider structures on the same page
(eg the settings page). Slider display templates continue to use ID-based
structures.
[davidjb]
- Style ``li`` elements on the Slider Settings page using specific class to
avoid affecting lists within slides.
[davidjb]
- Ensure ``ul`` elements within slides don't get styled by default.
[davidjb]
0.8.0b1 ~ 2011-11-20
--------------------
- Add 'Crossfade' effect to the slider. This option transitions slides into
each other with a crossfading effect, which contrasts with the standard
fade which fades out a slide before fading the next one in. Customise the
relevant CSS if you need custom z-indexes.
[davidjb]
- Prevent big arrow buttons from having a bottom border. This prevents a
conflict with the default Sunburst theme in Plone 4.1+.
[davidjb]
0.7.4 ~ 2011-10-05
------------------
- add portal transform to transform resolveuid/uid links to path links.
[thor27]
0.7.3 ~ 2011-10-05
------------------
- add js events.
[vangheem]
- handle objects that do not have a UID(plone site root).
[vangheem]
0.7.2 ~ July 28, 2011
---------------------
- final release
[vangheem]
0.7.2a1 ~ July 22, 2011
-----------------------
- More fixes for transitions on skipped slides--make it seemless.
[vangheem]
- Allow to restart playing the slider after user interaction via configuration.
[vangheem]
0.7.1a2 ~ July 21, 2011
-----------------------
- fixed auto transitions and numbering for skipped
navigation buttons.
[vangheem]
0.7.1a1 ~ July 19, 2011
-----------------------
- continuous slide now no longer has "rewind" effect.
[vangheem]
- allow some customization of what numbers show up
for Navigation buttons.
[vangheem]
- implement locking behavior on transitions to help
keep transitions and buttons clicks seem a little more
controllable
[vangheem]
0.7.0a1 ~ July 17, 2011
-----------------------
- add ability to have different transition and pause speeds
for even and odd slides.
[vangheem]
0.6.2rc1 ~ July 8, 2011
-----------------------
- retrieve image sizes from plone.app.imaging settings
[espen]
0.6.2b1 ~ July 7, 2011
----------------------
- make slider work with multiple on one page
[vangheem]
0.6.1 ~ July 6, 2011
--------------------
- reference css and js from root
[vangheem]
0.6.0 ~ July 6, 2011
--------------------
- Fix tests base
[toutpt]
- Add french translations and improve localization
[toutpt]
- add ability to render the sliderview inline and with easytemplate
[vangheem]
0.5.4 ~ February 20, 2011
-------------------------
- Fixed automatic transition not turning off when using
the fade effect. Fixes http://plone.org/products/collective.easyslider/issues/18
[vangheem]
- fixed slider view only showing last slide. Fixes http://plone.org/products/collective.easyslider/issues/16
[vangheem]
- provide ability to choose the image scale used for image and news item collection
slider views. Implements http://plone.org/products/collective.easyslider/issues/2
[vangheem]
0.5.3 ~ February 14, 2011
-------------------------
- on uninstall method, check that they are not reinstalling
the product. Otherwise, it will wipe all sliders..
[vangheem]
0.5.2 ~ January 8, 2011
-----------------------
- Add old style uninstall method so
the uninstall profile is automatically called.
[vangheem]
0.5.1 ~ January 7, 2011
-----------------------
- fixed css_slot in slider view. Closes http://plone.org/products/collective.easyslider/issues/11
[vangheem]
0.5.0 ~ January 7, 2011
-----------------------
- Fix some settings not working
[vangheem]
- add ability to render slider inline in page templates or
in an Easy Template. See Documentation.
[vangheem]
0.4.1 ~ January 7, 2011
-----------------------
- fix slider not being able to be customized TTW in Plone 4
without an error
[vangheem]
0.4.0 ~ January 6, 2011
-----------------------
* add integration with collective.easytemplate. You can now
easy create dynamic content in slides as you enable it in
the slide settings.
0.3.2 ~ August 28, 2010
-----------------------
* Fix plone 4 compatibility with interface
fixes http://plone.org/products/collective.easyslider/issues/9
* no longer set width and height in js
fixes http://plone.org/products/collective.easyslider/issues/7
0.3.1 ~ May 14, 2010
--------------------
* don't use SESSION to store the index since a user
could potentially abuse this...
[vangheem]
0.3 ~ May 13, 2010
------------------
* remove getSite call from upgrade step as it's unneeded anyways.
[vangheem]
* no longer open edit slide in light box thing by tranversing a transient
object--now works with any editor(TinyMCE) fixes http://plone.org/products/collective.easyslider/issues/1
[vangheem]
0.3rc4 ~ April 4, 2010
----------------------
* fixed problem where annotations settings were getting
set from the previous slides since the default values
were getting changed. fixes http://plone.org/products/collective.easyslider/issues/4
[vangheem]
* added type='text/css' to style tags
[vangheem]
0.3rc3 ~ April 16, 2010
-----------------------
* set z-index to 1 on slide-over class since it messes with live search.
fixes http://plone.org/products/collective.easyslider/issues/3
[vangheem]
* added pause/play button ability for navigation buttons.
[vangheem]
* adds fading navigation functionality
[vangheem]
0.3rc2
------
* added ability for different slide effects
* removed Zope2 style install and uninstall
* added slider portlet
* added no buttons option for navigation type
0.3rc1
------
* added small buttons option for a navigation type
0.3b4
-----
* fixed bug where if a content item had a slider page in it's acquisition chain it would throw an error.
0.3b3.1
-------
* quick fix for uninstall problem... should have tested it better!
0.3b3
-----
* fixed link issues for images
0.3b2
-----
* made some fixes to go to button implementation.
* added centering attribute
* can now choose to show the large left right buttons or the go to buttons.
0.3b1.1
-------
* moved to easySlider 1.5
* added auto, pause and continuous options
* added sliderview to Folder and Collection types
* added go to buttons and options for slider
0.2b1
-----
* better test support
* better design of settings page
* changed some descriptions
* reorganized some code
* confirmation to remove slide
0.2a1
-----
* Everything ready to go
* no vast browser testing
* no code testing yet either
============
This product allows you to easily add an easySlider content rotator to any page on a plone site using a WYSIWYG editor to design each slide.
How-to
------
On a page, click actions -> Add Slider. It should bring you to a slider settings page where you can modify different aspects of the slider and add/remove slides using a WYSWGY editor. Keep in mind that the slides are fixed width so you need to specify the size you want. Then you'll want to start adding your slides. To do this just click ``add new slide`` near the bottom of the page. Once you've finished adding slides and re-ordering slides, click ``save`` and you should see the slider on your page now.
You can also select a slider view for Folder and Collection content types. Then the slider settings for that page will include settings to limit the amount of slides to have and to limit the type of slides used.
Examples
--------
Examples of this being used in the wild.
* http://www.fbi.gov/
* http://www.chicagohistory.org
* http://www.reamp.org
* http://www.rehabpro.org
* http://swca.org/
Installation
------------
* add collective.easyslider to your eggs and zcml sections
* re-run buildout
* install the product like you would any other Plone product
Uninstall
---------
* Uninstall like normal
* go to portal_setup in the zmi, click the 'import' tab, select "collective.easyslider uninstall" and click the "Import all steps" button at the bottom to perform clean up.
Easy Template Integration
-------------------------
If you'd like to add dynamic content to your slides, add collective.easytemplate
to your eggs section in buildout, re-run buildout and restart your installation.
Then in the slider settings make sure you enable Easy Template.
You can also render sliders in a Easy Template. The syntax is:
{{ slider("../front-page") }}
And for the sliderview
{{ sliderview("../a-collection") }}
Rendering Slider in Templates
-----------------------------
You can also easily render your slider in a page template
if you'd like even more control over how it is displayed:
<tal:slider tal:content="structure context/../front-page/@@slider_util/render_inline" />
And for the sliderview
<tal:slider tal:content="structure context/../front-page/@@slider_util/render_sliderview_inline" />
Credits and Contributions
-------------------------
* a lot of the credit for the inspiration, styling and insight into this product belongs to Espen Moe-Nilssen
Changelog
=========
1.3.2 (2013-02-06)
------------------
- look at parent object if context is not anonatable.
this will fix plone.app.event sub events breaking.
[vangheem]
1.3.1 (2013-02-05)
------------------
- fix import if plone.app.collection is not installed
[vangheem]
1.3.0 (2013-02-02)
------------------
- support new style collections with sliderview
[ableeb]
1.2.0 (2013-01-16)
------------------
- be consistent with Anysurfer
XXX HTML markup has changed slightly so please
test any style customizations when upgrading.
[smoussiaux]
1.1.1 (2012-10-20)
------------------
- add zcml include to fix startup issues in some
Plone 4.2 setups.
[zopyx]
1.1 (2012-09-19)
----------------
- Add global configuration
[zombified]
1.0 (2012-04-25)
----------------
- allow original scale for slider view
[vangheem]
- add pause on hover option
[espen]]
0.8.1b1 (2012-02-16)
--------------------
- Add randomize feature
[vangheem]
- allow drag n drop reordering of slides
[vangheem]
0.8.0b2 (2012-02-15)
--------------------
- Ensure that users with the Site Administrator role can edit slider settings
under Plone 4.1+.
[davidjb]
- Fix failing test under Plone 3.
[davidjb]
- Remove bottom border for navigation bullets under <= IE6.
[davidjb]
- Allow active navigation bullets to change on slide transition under new
*Navigation Bullets* layout.
[davidjb]
- Added a new layout with bullets.
[espenmn]
- Ensure slider JS selects only ``li`` elements that are slides. This fixes
transition problems when lists are within slides.
[davidjb]
- Fix IE 5/6 display issue with slider container showing overflow.
[davidjb]
- Return an error if the user's attempt to move/remove a slide fails.
This prevents unnecessary AJAX calls from the client to reload slides.
[davidjb]
- Prevent index out of range error when attempting to move a slide down
if that slide is already at the end.
[davidjb]
- Simplify CSS for settings page as existing slider styles are now applicable.
[davidjb]
- Change slider settings page to ensure that ``li`` slide elements are
correctly wrapped in a ``ul`` by mimicking actual slider structures. This
fixes settings page issues under IE 6 and 7 by ensuring the page produces
valid list markup.
[davidjb]
- Add CSS class selectors for slider and slider containers rather than just
ID-based selectors. This allows multiple slider structures on the same page
(eg the settings page). Slider display templates continue to use ID-based
structures.
[davidjb]
- Style ``li`` elements on the Slider Settings page using specific class to
avoid affecting lists within slides.
[davidjb]
- Ensure ``ul`` elements within slides don't get styled by default.
[davidjb]
0.8.0b1 ~ 2011-11-20
--------------------
- Add 'Crossfade' effect to the slider. This option transitions slides into
each other with a crossfading effect, which contrasts with the standard
fade which fades out a slide before fading the next one in. Customise the
relevant CSS if you need custom z-indexes.
[davidjb]
- Prevent big arrow buttons from having a bottom border. This prevents a
conflict with the default Sunburst theme in Plone 4.1+.
[davidjb]
0.7.4 ~ 2011-10-05
------------------
- add portal transform to transform resolveuid/uid links to path links.
[thor27]
0.7.3 ~ 2011-10-05
------------------
- add js events.
[vangheem]
- handle objects that do not have a UID(plone site root).
[vangheem]
0.7.2 ~ July 28, 2011
---------------------
- final release
[vangheem]
0.7.2a1 ~ July 22, 2011
-----------------------
- More fixes for transitions on skipped slides--make it seemless.
[vangheem]
- Allow to restart playing the slider after user interaction via configuration.
[vangheem]
0.7.1a2 ~ July 21, 2011
-----------------------
- fixed auto transitions and numbering for skipped
navigation buttons.
[vangheem]
0.7.1a1 ~ July 19, 2011
-----------------------
- continuous slide now no longer has "rewind" effect.
[vangheem]
- allow some customization of what numbers show up
for Navigation buttons.
[vangheem]
- implement locking behavior on transitions to help
keep transitions and buttons clicks seem a little more
controllable
[vangheem]
0.7.0a1 ~ July 17, 2011
-----------------------
- add ability to have different transition and pause speeds
for even and odd slides.
[vangheem]
0.6.2rc1 ~ July 8, 2011
-----------------------
- retrieve image sizes from plone.app.imaging settings
[espen]
0.6.2b1 ~ July 7, 2011
----------------------
- make slider work with multiple on one page
[vangheem]
0.6.1 ~ July 6, 2011
--------------------
- reference css and js from root
[vangheem]
0.6.0 ~ July 6, 2011
--------------------
- Fix tests base
[toutpt]
- Add french translations and improve localization
[toutpt]
- add ability to render the sliderview inline and with easytemplate
[vangheem]
0.5.4 ~ February 20, 2011
-------------------------
- Fixed automatic transition not turning off when using
the fade effect. Fixes http://plone.org/products/collective.easyslider/issues/18
[vangheem]
- fixed slider view only showing last slide. Fixes http://plone.org/products/collective.easyslider/issues/16
[vangheem]
- provide ability to choose the image scale used for image and news item collection
slider views. Implements http://plone.org/products/collective.easyslider/issues/2
[vangheem]
0.5.3 ~ February 14, 2011
-------------------------
- on uninstall method, check that they are not reinstalling
the product. Otherwise, it will wipe all sliders..
[vangheem]
0.5.2 ~ January 8, 2011
-----------------------
- Add old style uninstall method so
the uninstall profile is automatically called.
[vangheem]
0.5.1 ~ January 7, 2011
-----------------------
- fixed css_slot in slider view. Closes http://plone.org/products/collective.easyslider/issues/11
[vangheem]
0.5.0 ~ January 7, 2011
-----------------------
- Fix some settings not working
[vangheem]
- add ability to render slider inline in page templates or
in an Easy Template. See Documentation.
[vangheem]
0.4.1 ~ January 7, 2011
-----------------------
- fix slider not being able to be customized TTW in Plone 4
without an error
[vangheem]
0.4.0 ~ January 6, 2011
-----------------------
* add integration with collective.easytemplate. You can now
easy create dynamic content in slides as you enable it in
the slide settings.
0.3.2 ~ August 28, 2010
-----------------------
* Fix plone 4 compatibility with interface
fixes http://plone.org/products/collective.easyslider/issues/9
* no longer set width and height in js
fixes http://plone.org/products/collective.easyslider/issues/7
0.3.1 ~ May 14, 2010
--------------------
* don't use SESSION to store the index since a user
could potentially abuse this...
[vangheem]
0.3 ~ May 13, 2010
------------------
* remove getSite call from upgrade step as it's unneeded anyways.
[vangheem]
* no longer open edit slide in light box thing by tranversing a transient
object--now works with any editor(TinyMCE) fixes http://plone.org/products/collective.easyslider/issues/1
[vangheem]
0.3rc4 ~ April 4, 2010
----------------------
* fixed problem where annotations settings were getting
set from the previous slides since the default values
were getting changed. fixes http://plone.org/products/collective.easyslider/issues/4
[vangheem]
* added type='text/css' to style tags
[vangheem]
0.3rc3 ~ April 16, 2010
-----------------------
* set z-index to 1 on slide-over class since it messes with live search.
fixes http://plone.org/products/collective.easyslider/issues/3
[vangheem]
* added pause/play button ability for navigation buttons.
[vangheem]
* adds fading navigation functionality
[vangheem]
0.3rc2
------
* added ability for different slide effects
* removed Zope2 style install and uninstall
* added slider portlet
* added no buttons option for navigation type
0.3rc1
------
* added small buttons option for a navigation type
0.3b4
-----
* fixed bug where if a content item had a slider page in it's acquisition chain it would throw an error.
0.3b3.1
-------
* quick fix for uninstall problem... should have tested it better!
0.3b3
-----
* fixed link issues for images
0.3b2
-----
* made some fixes to go to button implementation.
* added centering attribute
* can now choose to show the large left right buttons or the go to buttons.
0.3b1.1
-------
* moved to easySlider 1.5
* added auto, pause and continuous options
* added sliderview to Folder and Collection types
* added go to buttons and options for slider
0.2b1
-----
* better test support
* better design of settings page
* changed some descriptions
* reorganized some code
* confirmation to remove slide
0.2a1
-----
* Everything ready to go
* no vast browser testing
* no code testing yet either
Release history Release notifications | RSS feed
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
Source Distribution
collective.easyslider-1.3.2.zip
(108.9 kB
view hashes)
