collective.wtf 1.0b7

General

The CSV file format generally relies on key-value pairs, where keys are in the first column (A) and values in the second column (B). Key names are not case sensitive, may substitute hyphens for spaces, and may optionally contain a trailing colon. For example, the following are all equivalent:

Some key:,some_value
some key:,some_value
some-key , some_value

The file is sub-divided into sections. A section begins with a row containing the section name in square brackets, and ends with at least one blank row. For example:

[SomeSection]
Some key:,some_value
Some other key:,another_value

[AnotherSection]
...

The various sections are listed below, in more detail.

The [Workflow] section

This is generally the first section in the file. It contains information about the workflow as a whole, with the following keys. Keys marked with a * are required.

Id* – The name of the workflow as it will be installed in portal_workflow.

Initial state* – The name of the initial state of the workflow. Must match

the id of a [State] section elsewhere in the file.

Title – A human-friendly title for the workflow.

Description – A human-friendly description for the workflow.

Type – The meta_type of the workflow. Defaults to ‘Workflow’, which is the

standard DCWorkflow definition type. Note that if you have a custom workflow, there is no guarantee that collective.wtf will be able to parse it, so be careful.

State variable – The workflow variable that holds the current state. For

the primary workflow of a Plone content object, this should be ‘review_state’, which is the default. However, if you are designing a secondary workflow in a multi-workflow chain, it may need a different state variable.

For example:

[Workflow]
Id:,test_workflow
Title:,Test workflow
Description:,Description of workflow
Initial state:,state_one

The [State] section

This section defines a single workflow state. It must end with a permissions table - see below.

Id* – A unique name for the state.

Title* – A human-friendly title.

Description – A human-friendly description.

Transitions – A comma-separated list of transitions. Note that this should

be limited to a single cell. Hence, you will need double quotes around the list, e.g. “transition_1, transition_2”. Each transition listed must match the id of a [Transition] section elsewhere in the file.

Worklist – The name of a worklist for objects in this state, if one is

required.

Worklist label – A human-friendly label for the worklist.

Worklist guard permission – The name of a permission used to guard the

worklist, if required.

Worklist guard expression – A TALES expression used to guard the worklist,

if required.

Worklist guard role – The name of a role used to guard the workflist, if

required.

For example:

[State]
Id:,state_one
Title:,State one
Description:,Description of state one
Transitions:,"to_state_two,to_state_three"
Worklist:,State one worklist
Worklist label:,Worklist stuff goes here
Worklist guard permission:,Review portal content
Worklist guard expression:,python:True==True
Worklist guard role:,Manager
Permissions,                  Acquire,  Manager, Member, Owner
View,                         Y,        Y,       N,      Y
Access contents information,  Y,        Y,       N,      Y
Modify portal content,        N,        Y,       N,      N

The permissions table

At the end of a [State] section, before the blank line that signals the end of that section, there must be a table of permissions for this state. The table may look like this:

Permissions,                  Acquire,  Manager, Member, Owner
View,                         Y,        Y,       N,      Y
Access contents information,  Y,        Y,       N,      Y
Modify portal content,        N,        Y,       N,      N

Note that the additional whitespace here is purely for readability, and is optional.

The permissions table is created by having the pseudo-key ‘Permissions’ in column A. Column B is used to indicate whether a given permission is acquired from the parent object or not. By convention, the header row should contain the word ‘Acquire’ here. Subsequent rows should contain role names.

Underneath the header row, the first column should contain the names of permissions. Subsequent columns indicate whether the given role has the given permission in this workflow state. A case-insensitive value of ‘Y’, ‘*’, ‘X’ or ‘Yes’ indicates true. Any other value (including blanks, ‘N’ or ‘No’) indicates false.

The [Transition] section

This section defines a transition between two states. It may contain the following keys:

Id* – A unique identifier for the transition

Title – A human-friendly title for the transition.

Description – A human-friendly description for the transition.

URL – A string containing a URL that will be used when the user clicks

the transition in the workflow menu. May contain the special variables %(portal_url)s, %(folder_url)s, %(content_url)s and %(user_id)s. If not given, the default view will be used.

Target state – The state that the workflow should move to after this

transition has been executed. If omitted, the transition will not cause a state change. If included, it must match the id of a [State] section defined elsewhere in the file.

Trigger – One of ‘User’ or ‘Automatic’. Defaults to ‘User’. An automatic

transition is one which is run automatically when the workflow enters a state for which the automatic transition is a valid exit transition. Automatic transitions are often used with transition guards to automatically advance the workflow in certain situations, and/or with transition scripts that execute on the automatic transition.

Guard permission – The name of a permission that is required before this

transition is made available.

Guard expression – A TALES expression that must be true before this

transition is made available.

Guard role – The name of a role that the current user must have before

this transition is made available.

Script before – A script to execute before the transition effects a state

change. This may either contain a simple string, in which case it must match the id of a [Script] section elsewhere in the file, or a dotted name to an external method, e.g. ‘my.product.Extensions.script_name.function_name’, where ‘my.product’ is the name of a product that contains an Extensions/ folder, ‘script_name’ is the name of a .py file in that Extensions/ folder, and ‘function_name’ is the name of a function in that .py file. The function must take two parameters: self, and a state_change, a StateChangeInfo object. In this case, the importer will create a new External Method with the appropriate module (‘my.product.script_name’) and function (‘function_name’), give it and id based on the script and function name (in this case, ‘script_name.function_name’), and set this as the script before.

Script after – A script to execute after the transition effects a state

change. This may contain the same values as Script before.

For example:

[Transition]
Id:,to_state_one
Title:,Make it state one
Description:,Make it go to state one
Target state:,state_one
Trigger:,User
Guard permission:,Modify portal content,View
Guard expression:,python:True==True
Guard role:,Manager
Script before:,shared_script
Script after:,collective.wtf.Extensions.test_scripts.inline_test_one

The [Script] section

This may be used to define a script explicitly. Only external method scripts are supported. Note that single-use external methods can be defined “inline” using the notation described under ‘The [Transition] section’ above.

Id* – The id of the script

Type* – Should be ‘External Method’. In the future, other types of script

may be supported.

Module* – The module where the external method is defined. Note that this

should not contain the ‘Extensions’ directory.

Function* – The name of the function to execute when the external method

is run.

For example:

[Script]
Id:,shared_script
Type:,External Method
Module:, collective.wtf.test_scripts
Function:,script_section_test

1.0b7

• Add CMF 2.2 / Plone 4 support. Note that the new workflow options (like “manager bypass” and “creation guard”) are not (yet) supported. [optilude]

1.0b6

• Add support for setting the state variable, with the ‘State variable’ option to the main workflow section. [optilude]

1.0b5

• Now imports/exports meta_type, in order to support workflows defined with collective.reactiveworkflow. This uses the option ‘Type’ in the main workflow section. [optildue]

1.0b5

• Added utility methods to trigger automatic transitions on self and on the parent, borrowed from Products.ReactiveWorkflow, but made to be useable directly from a script rather than only in an event handler. [optilude]

• Improve documentation [optilude]

• Add inline script support [optilude]

1.0b4

• Add script support [elro]

1.0b2

• Add the ability to display roles in any context via a simple browser view [optilude]