darker 1.5.0

What?

This utility reformats and checks Python source code files. However, when run in a Git repository, it only applies reformatting and reports errors in regions which have changed in the Git working tree since the last commit.

The reformatters supported are:

• Black for code reformatting

• isort for sorting imports

See Using linters below for the list of supported linters.

To easily run Darker as a Pytest plugin, see pytest-darker.

To integrate Darker with your IDE or with pre-commit, see the relevant sections below in this document.

Why?

You want to start unifying code style in your project using Black. Maybe you also like to standardize on how to order your imports, or do static type checking or other static analysis for your code.

However, instead of formatting the whole code base in one giant commit, you’d like to only change formatting when you’re touching the code for other reasons.

This can also be useful when contributing to upstream codebases that are not under your complete control.

Partial formatting is not supported by Black itself, for various good reasons, and so far there hasn’t been a plan to implemented it either (134, 142, 245, 370, 511, 830). However, in September 2021 Black developers started to hint towards adding this feature after all (1352). This might at least simplify Darker’s algorithm substantially.

But for the time being, this is where darker enters the stage. This tool is for those who want to do partial formatting right now.

Note that this tool is meant for special situations when dealing with existing code bases. You should just use Black and isort as is when starting a project from scratch.

You may also want to still consider whether reformatting the whole code base in one commit would make sense in your particular case. You can ignore a reformatting commit in git blame using the blame.ignoreRevsFile config option or --ignore-rev on the command line. For a deeper dive into this topic, see Avoiding ruining git blame in Black documentation, or the article Why does Black insist on reformatting my entire project? from Łukasz Langa (@ambv, the creator of Black). Here’s an excerpt:

“When you make this single reformatting commit, everything that comes after is semantic changes so your commit history is clean in the sense that it actually shows what changed in terms of meaning, not style. There are tools like darker that allow you to only reformat lines that were touched since the last commit. However, by doing that you forever expose yourself to commits that are a mix of semantic changes with stylistic changes, making it much harder to see what changed.”

How?

To install, use:

pip install darker

Or, if you’re using Conda for package management:

conda install -c conda-forge darker isort

The darker <myfile.py> or darker <directory> command reads the original file(s), formats them using Black, combines original and formatted regions based on edits, and writes back over the original file(s).

Alternatively, you can invoke the module directly through the python executable, which may be preferable depending on your setup. Use python -m darker instead of darker in that case.

By default, darker just runs Black to reformat the code. You can enable additional features with command line options:

• -i / --isort: Reorder imports using isort. Note that isort must be run in the same Python environment as the packages to process, as it imports your modules to determine whether they are first or third party modules.

• -L <linter> / --lint <linter>: Run a supported linter (see Using linters)

New in version 1.1.0: The -L / --lint option. New in version 1.2.2: Package available in conda-forge.

Example

This example walks you through a minimal practical use case for Darker.

First, create an empty Git repository:

$ mkdir /tmp/test
$ cd /tmp/test
$ git init
Initialized empty Git repository in /tmp/test/.git/

In the root of that directory, create the ill-formatted Python file our_file.py:

if True: print('hi')
print()
if False: print('there')

Commit that file:

$ git add our_file.py
$ git commit -m "Initial commit"
[master (root-commit) a0c7c32] Initial commit
 1 file changed, 3 insertions(+)
 create mode 100644 our_file.py

Now modify the first line in that file:

if True: print('CHANGED TEXT')
print()
if False: print('there')

You can ask Darker to show the diff for minimal reformatting which makes edited lines conform to Black rules:

$ darker --diff our_file.py
--- our_file.py
+++ our_file.py
@@ -1,3 +1,4 @@
-if True: print('CHANGED TEXT')
+if True:
+    print("CHANGED TEXT")
print()
if False: print('there')

Alternatively, Darker can output the full reformatted file (works only when a single Python file is provided on the command line):

$ darker --stdout our_file.py

if True:
    print("CHANGED TEXT")
print()
if False: print('there')

If you omit the --diff and --stdout options, Darker replaces the files listed on the command line with partially reformatted ones as shown above:

$ darker our_file.py

Now the contents of our_file.py will have changed. Note that the original print() and if False: ... lines have not been reformatted since they had not been edited!

if True:
    print("CHANGED TEXT")
print()
if False: print('there')

You can also ask Darker to reformat edited lines in all Python files in the repository:

$ darker .

Or, if you want to compare to another branch (or, in fact, any commit) instead of the last commit:

$ darker --revision master .

Customizing darker, Black and isort behavior

Project-specific default options for darker, Black and isort are read from the project’s pyproject.toml file in the repository root. isort also looks for a few other places for configuration.

Darker does honor exclusion options in Black configuration files when recursing directories, but the exclusions are only applied to Black reformatting. Isort and linters are still run on excluded files. Also, individual files explicitly listed on the command line are still reformatted even if they match exclusion patterns.

For more details, see:

• Black documentation about pyproject.toml

• isort documentation about config files

The following command line arguments can also be used to modify the defaults:

-r REV, --revision REV

Git revision against which to compare the working tree. Tags, branch names, commit hashes, and other expressions like HEAD~5 work here. Also a range like master...HEAD or master... can be used to compare the best common ancestor. With the magic value :PRE-COMMIT:, Darker works in pre-commit compatible mode. Darker expects the revision range from the PRE_COMMIT_FROM_REF and PRE_COMMIT_TO_REF environment variables. If those are not found, Darker works against HEAD.

--diff

Don’t write the files back, just output a diff for each file on stdout. Highlight syntax if on a terminal and the pygments package is available, or if enabled by configuration.

-d, --stdout

Force complete reformatted output to stdout, instead of in-place. Only valid if there’s just one file to reformat. Highlight syntax if on a terminal and the pygments package is available, or if enabled by configuration.

--check

Don’t write the files back, just return the status. Return code 0 means nothing would change. Return code 1 means some files would be reformatted.

-i, --isort

Also sort imports using the isort package

-L CMD, --lint CMD

Also run a linter on changed files. CMD can be a name of path of the linter binary, or a full quoted command line. Highlight linter output syntax if on a terminal and the pygments package is available, or if enabled by configuration.

-c PATH, --config PATH

Ask black and isort to read configuration from PATH.

-v, --verbose

Show steps taken and summarize modifications

-q, --quiet

Reduce amount of output

--color

Enable syntax highlighting even for non-terminal output. Overrides the environment variable PY_COLORS=0

--no-color

Disable syntax highlighting even for terminal output. Overrides the environment variable PY_COLORS=1

-S, --skip-string-normalization

Don’t normalize string quotes or prefixes

--no-skip-string-normalization

Normalize string quotes or prefixes. This can be used to override skip_string_normalization = true from a configuration file.

--skip-magic-trailing-comma

Skip adding trailing commas to expressions that are split by comma where each element is on its own line. This includes function signatures. This can be used to override skip_magic_trailing_comma = true from a configuration file.

-l LENGTH, --line-length LENGTH

How many characters per line to allow [default: 88]

-W WORKERS, --workers WORKERS

How many parallel workers to allow, or 0 for one per core [default: 1]

To change default values for these options for a given project, add a [tool.darker] section to pyproject.toml in the project’s root directory. For example:

[tool.darker]
src = [
    "src/mypackage",
]
revision = "master"
diff = true
check = true
isort = true
lint = [
    "pylint",
]
log_level = "INFO"

Be careful to not use options which generate output which is unexpected for other tools. For example, VSCode only expects the reformat diff, so lint = [ ... ] can’t be used with it.

New in version 1.0.0:

• The -c, -S and -l command line options.

• isort is configured with -c and -l, too.

New in version 1.1.0: The command line options

• -r / --revision

• --diff

• --check

• --no-skip-string-normalization

• -L / --lint

New in version 1.2.0: Support for

• commit ranges in -r / --revision.

• a [tool.darker] section in pyproject.toml.

New in version 1.2.2: Support for -r :PRE-COMMIT: / --revision=:PRE_COMMIT:

New in version 1.3.0: Support for command line option --skip-magic-trailing-comma

New in version 1.3.0: The -d / --stdout command line option

New in version 1.5.0: The -W / --workers command line option

New in version 1.5.0: The --color and --no-color command line options

Editor integration

Many editors have plugins or recipes for integrating Black. You may be able to adapt them to be used with darker. See editor integration in the Black documentation.

set autoread
autocmd BufWritePost *.py silent :!darker %

(use-package reformatter
  :hook ((python-mode . darker-reformat-on-save-mode))
  :config
  (reformatter-define darker-reformat
    :program "darker"
    :stdin nil
    :stdout nil
    :args (list "-q" input-file))

Using as a pre-commit hook

New in version 1.2.1

To use Darker locally as a Git pre-commit hook for a Python project, do the following:

1. Install pre-commit in your environment (see pre-commit Installation for details).

2. Create a base pre-commit configuration:

   pre-commit sample-config >.pre-commit-config.yaml

3. Append to the created .pre-commit-config.yaml the following lines:

   -   repo: https://github.com/akaihola/darker
       rev: 1.5.0
       hooks:
       -   id: darker

4. install the Git hook scripts:

   pre-commit install

-   repo: https://github.com/akaihola/darker
    rev: 1.5.0
    hooks:
    -   id: darker
        args: [--isort]
        additional_dependencies:
        -   isort~=5.9

GitHub Actions integration

You can use Darker within a GitHub Actions workflow without setting your own Python environment. Great for enforcing that modifications and additions to your code match the Black code style.

name: Lint

on: [push, pull_request]

jobs:
  lint:
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v3
        with:
          fetch-depth: 0
      - uses: actions/setup-python@v2
      - uses: akaihola/darker@1.5.0
        with:
          options: "--check --diff --color"
          revision: "master..."
          src: "./src"
          version: "1.5.0"
          lint: "flake8,pylint==2.13.1"

Using linters

One way to use Darker is to filter linter output to modified lines only. Darker supports any linter with output in one of the following formats:

<file>:<linenum>: <description>
<file>:<linenum>:<col>: <description>

Most notably, the following linters/checkers have been verified to work with Darker:

• Mypy for static type checking

• Pylint for generic static checking of code

• Flake8 for style guide enforcement

• cov_to_lint.py for test coverage

New in version 1.1.0: Support for Mypy, Pylint, Flake8 and compatible linters.

New in version 1.2.0: Support for test coverage output using cov_to_lint.py.

To run a linter, use the --lint / -L command line option:

• -L mypy: do static type checking using Mypy

• -L pylint: analyze code using Pylint

• -L flake8: enforce the Python style guide using Flake8

• -L cov_to_lint.py: read .coverage and list non-covered modified lines

Darker also groups linter output into blocks of consecutive lines separated by blank lines. Here’s an example of cov_to_lint.py output:

$ darker --revision 0.1.0.. --check --lint cov_to_lint.py src
src/darker/__main__.py:94:  no coverage:             logger.debug("No changes in %s after isort", src)
src/darker/__main__.py:95:  no coverage:             break

src/darker/__main__.py:125: no coverage:         except NotEquivalentError:

src/darker/__main__.py:130: no coverage:             if context_lines == max_context_lines:
src/darker/__main__.py:131: no coverage:                 raise
src/darker/__main__.py:132: no coverage:             logger.debug(

Syntax highlighting

Darker automatically enables syntax highlighting for the --diff, -d/--stdout and -L/--lint options if it’s running on a terminal and the Pygments package is installed.

You can force enable syntax highlighting on non-terminal output using

• the color = true option in the [tool.darker] section of pyproject.toml of your Python project’s root directory,

• the PY_COLORS=1 environment variable, and

• the --color command line option for darker.

You can force disable syntax highlighting on terminal output using

• the color = false option in pyproject.toml,

• the PY_COLORS=0 environment variable, and

• the --no-color command line option.

In the above lists, latter configuration methods override earlier ones, so the command line options always take highest precedence.

How does it work?

Darker takes a git diff of your Python files, records which lines of current files have been edited or added since the last commit. It then runs Black and notes which chunks of lines were reformatted. Finally, only those reformatted chunks on which edited lines fall (even partially) are applied to the edited file.

Also, in case the --isort option was specified, isort is run on each edited file before applying Black. Similarly, each linter requested using the –lint <command> option is run, and only linting errors/warnings on modified lines are displayed.

License

BSD. See LICENSE.rst.

Prior art

• black-macchiato

• darken (deprecated in favor of Darker; thanks Carreau for inspiration!)

Interesting code formatting and analysis projects to watch

The following projects are related to Black or Darker in some way or another. Some of them we might want to integrate to be part of a Darker run.

• blacken-docs – Run Black on Python code blocks in documentation files

• blackdoc – Run Black on documentation code snippets

• velin – Reformat docstrings that follow the numpydoc convention

• diff-cov-lint – Pylint and coverage reports for git diff only

• xenon – Monitor code complexity

• pyupgrade – Upgrade syntax for newer versions of the language (see #51)

• yapf – Google’s Python formatter

• yapf_diff – apply yapf or other formatters to modified lines only

Contributors ✨

See README.rst for the list of contributors.

This project follows the all-contributors specification. Contributions of any kind are welcome!

GitHub stars trend