distribute 0.6.46

===============================
Installing and Using Distribute
===============================

.. contents:: **Table of Contents**

-----------
Disclaimers
-----------

About the fork
==============

`Distribute` is a now deprecated fork of the `Setuptools` project.

Distribute was intended to replace Setuptools as the standard method
for working with Python module distributions. The code has since been merged
back into the parent project as is being maintained by the community at large.

`Distribute` is now being maintained as a branch in the `Setuptools
repository <https://bitbucket.org/pypa/setuptools>`_.

More documentation
==================

You can get more information in the Sphinx-based documentation, located
at http://packages.python.org/distribute. This documentation includes the old
Setuptools documentation that is slowly replaced, and brand new content.

About the installation process
==============================

The `Distribute` installer modifies your installation by de-activating an
existing installation of `Setuptools` in a bootstrap process. This process
has been tested in various installation schemes and contexts but in case of a
bug during this process your Python installation might be left in a broken
state. Since all modified files and directories are copied before the
installation starts, you will be able to get back to a normal state by reading
the instructions in the `Uninstallation instructions`_ section.

In any case, it is recommended to save you `site-packages` directory before
you start the installation of `Distribute`.

-------------------------
Installation Instructions
-------------------------

Distribute is only released as a source distribution.

It can be installed using pip, and can be done so with the source tarball,
or by using the ``distribute_setup.py`` script provided online.

``distribute_setup.py`` is the simplest and preferred way on all systems.

distribute_setup.py
===================

Download
`distribute_setup.py <http://python-distribute.org/distribute_setup.py>`_
and execute it, using the Python interpreter of your choice.

If your shell has the ``curl`` program you can do::

$ curl -O http://python-distribute.org/distribute_setup.py
$ python distribute_setup.py

Notice this file is also provided in the source release.

pip
===

Run easy_install or pip::

$ pip install distribute

Source installation
===================

Download the source tarball, uncompress it, then run the install command::

$ curl -O http://pypi.python.org/packages/source/d/distribute/distribute-0.6.46.tar.gz
$ tar -xzvf distribute-0.6.46.tar.gz
$ cd distribute-0.6.46
$ python setup.py install

---------------------------
Uninstallation Instructions
---------------------------

Like other distutils-based distributions, Distribute doesn't provide an
uninstaller yet. It's all done manually! We are all waiting for PEP 376
support in Python.

Distribute is installed in three steps:

1. it gets out of the way an existing installation of Setuptools
2. it installs a `fake` setuptools installation
3. it installs distribute

Distribute can be removed like this:

- remove the ``distribute*.egg`` file located in your site-packages directory
- remove the ``setuptools.pth`` file located in you site-packages directory
- remove the easy_install script located in you ``sys.prefix/bin`` directory
- remove the ``setuptools*.egg`` directory located in your site-packages directory,
if any.

If you want to get back to setuptools:

- reinstall setuptools using its instruction.

Lastly:

- remove the *.OLD.* directory located in your site-packages directory if any,
**once you have checked everything was working correctly again**.

-------------------------
Quick help for developers
-------------------------

To create an egg which is compatible with Distribute, use the same
practice as with Setuptools, e.g.::

from setuptools import setup

setup(...
)

To use `pkg_resources` to access data files in the egg, you should
require the Setuptools distribution explicitly::

from setuptools import setup

setup(...
install_requires=['setuptools']
)

Only if you need Distribute-specific functionality should you depend
on it explicitly. In this case, replace the Setuptools dependency::

from setuptools import setup

setup(...
install_requires=['distribute']
)

-----------
Install FAQ
-----------

- **Why is Distribute wrapping my Setuptools installation?**

Since Distribute is a fork, and since it provides the same package
and modules, it renames the existing Setuptools egg and inserts a
new one which merely wraps the Distribute code. This way, full
backwards compatibility is kept for packages which rely on the
Setuptools modules.

At the same time, packages can meet their dependency on Setuptools
without actually installing it (which would disable Distribute).

- **How does Distribute interact with virtualenv?**

Everytime you create a virtualenv it will install setuptools by default.
You either need to re-install Distribute in it right after or pass the
``--distribute`` option when creating it.

Once installed, your virtualenv will use Distribute transparently.

Although, if you have Setuptools installed in your system-wide Python,
and if the virtualenv you are in was generated without the `--no-site-packages`
option, the Distribute installation will stop.

You need in this case to build a virtualenv with the `--no-site-packages`
option or to install `Distribute` globally.

- **How does Distribute interacts with zc.buildout?**

You can use Distribute in your zc.buildout, with the --distribute option,
starting at zc.buildout 1.4.2::

$ python bootstrap.py --distribute

For previous zc.buildout versions, *the only thing* you need to do
is use the bootstrap at `http://python-distribute.org/bootstrap.py`. Run
that bootstrap and ``bin/buildout`` (and all other buildout-generated
scripts) will transparently use distribute instead of setuptools. You do
not need a specific buildout release.

A shared eggs directory is no problem (since 0.6.6): the setuptools egg is
left in place unmodified. So other buildouts that do not yet use the new
bootstrap continue to work just fine. And there is no need to list
``distribute`` somewhere in your eggs: using the bootstrap is enough.

The source code for the bootstrap script is located at
`http://bitbucket.org/tarek/buildout-distribute`.



-----------------------------
Feedback and getting involved
-----------------------------

- Mailing list: http://mail.python.org/mailman/listinfo/distutils-sig
- Issue tracker: http://bitbucket.org/tarek/distribute/issues/
- Code Repository: http://bitbucket.org/pypa/setuptools?at=distribute
=======
CHANGES
=======

------
0.6.46
------

* `Issue #375`_: Issue a warning if the PYTHON_EGG_CACHE or otherwise
customized egg cache location specifies a directory that's group- or
world-writable.

------
0.6.45
------

* `Issue #379`_: ``distribute_setup.py`` now traps VersionConflict as well,
restoring ability to upgrade from an older setuptools version.

------
0.6.44
------

* ``distribute_setup.py`` has been updated to allow Setuptools 0.7 to
satisfy use_setuptools.

------
0.6.43
------

* Issue #378: Restore support for Python 2.4 Syntax (regression in 0.6.42).

------
0.6.42
------

* External links finder no longer yields duplicate links.
* Issue #337: Moved site.py to setuptools/site-patch.py (graft of very old
patch from setuptools trunk which inspired PR #31).

------
0.6.41
------

* Issue #27: Use public api for loading resources from zip files rather than
the private method `_zip_directory_cache`.
* Added a new function ``easy_install.get_win_launcher`` which may be used by
third-party libraries such as buildout to get a suitable script launcher.

------
0.6.40
------

* Issue #376: brought back cli.exe and gui.exe that were deleted in the
previous release.

------
0.6.39
------

* Add support for console launchers on ARM platforms.
* Fix possible issue in GUI launchers where the subsystem was not supplied to
the linker.
* Launcher build script now refactored for robustness.
* Issue #375: Resources extracted from a zip egg to the file system now also
check the contents of the file against the zip contents during each
invocation of get_resource_filename.

------
0.6.38
------

* Issue #371: The launcher manifest file is now installed properly.

------
0.6.37
------

* Issue #143: Launcher scripts, including easy_install itself, are now
accompanied by a manifest on 32-bit Windows environments to avoid the
Installer Detection Technology and thus undesirable UAC elevation described
in `this Microsoft article
<http://technet.microsoft.com/en-us/library/cc709628%28WS.10%29.aspx>`_.

------
0.6.36
------

* Pull Request #35: In `Buildout issue 64
<https://github.com/buildout/buildout/issues/64>`_, it was reported that
under Python 3, installation of distutils scripts could attempt to copy
the ``__pycache__`` directory as a file, causing an error, apparently only
under Windows. Easy_install now skips all directories when processing
metadata scripts.

------
0.6.35
------


Note this release is backward-incompatible with distribute 0.6.23-0.6.34 in
how it parses version numbers.

* Issue #278: Restored compatibility with distribute 0.6.22 and setuptools
0.6. Updated the documentation to match more closely with the version
parsing as intended in setuptools 0.6.

------
0.6.34
------

* Issue #341: 0.6.33 fails to build under Python 2.4.

------
0.6.33
------

* Fix 2 errors with Jython 2.5.
* Fix 1 failure with Jython 2.5 and 2.7.
* Disable workaround for Jython scripts on Linux systems.
* Issue #336: `setup.py` no longer masks failure exit code when tests fail.
* Fix issue in pkg_resources where try/except around a platform-dependent
import would trigger hook load failures on Mercurial. See pull request 32
for details.
* Issue #341: Fix a ResourceWarning.

------
0.6.32
------

* Fix test suite with Python 2.6.
* Fix some DeprecationWarnings and ResourceWarnings.
* Issue #335: Backed out `setup_requires` superceding installed requirements
until regression can be addressed.

------
0.6.31
------

* Issue #303: Make sure the manifest only ever contains UTF-8 in Python 3.
* Issue #329: Properly close files created by tests for compatibility with
Jython.
* Work around Jython bugs `#1980 <http://bugs.jython.org/issue1980>`_ and
`#1981 <http://bugs.jython.org/issue1981>`_.
* `Issue #334`_: Provide workaround for packages that reference `sys.__stdout__`
such as numpy does. This change should address
`virtualenv #359 <https://github.com/pypa/virtualenv/issues/359>`_ as long
as the system encoding is UTF-8 or the IO encoding is specified in the
environment, i.e.::

PYTHONIOENCODING=utf8 pip install numpy

* Fix for encoding issue when installing from Windows executable on Python 3.
* `Issue #323`_: Allow `setup_requires` requirements to supercede installed
requirements. Added some new keyword arguments to existing pkg_resources
methods. Also had to updated how __path__ is handled for namespace packages
to ensure that when a new egg distribution containing a namespace package is
placed on sys.path, the entries in __path__ are found in the same order they
would have been in had that egg been on the path when pkg_resources was
first imported.

------
0.6.30
------

* `Issue #328`_: Clean up temporary directories in distribute_setup.py.
* Fix fatal bug in distribute_setup.py.

------
0.6.29
------

* Pull Request #14: Honor file permissions in zip files.
* `Issue #327`_: Merged pull request #24 to fix a dependency problem with pip.
* Merged pull request #23 to fix https://github.com/pypa/virtualenv/issues/301.
* If Sphinx is installed, the `upload_docs` command now runs `build_sphinx`
to produce uploadable documentation.
* `Issue #326`_: `upload_docs` provided mangled auth credentials under Python 3.
* `Issue #320`_: Fix check for "createable" in distribute_setup.py.
* `Issue #305`_: Remove a warning that was triggered during normal operations.
* `Issue #311`_: Print metadata in UTF-8 independent of platform.
* `Issue #303`_: Read manifest file with UTF-8 encoding under Python 3.
* `Issue #301`_: Allow to run tests of namespace packages when using 2to3.
* `Issue #304`_: Prevent import loop in site.py under Python 3.3.
* `Issue #283`_: Reenable scanning of `*.pyc` / `*.pyo` files on Python 3.3.
* `Issue #299`_: The develop command didn't work on Python 3, when using 2to3,
as the egg link would go to the Python 2 source. Linking to the 2to3'd code
in build/lib makes it work, although you will have to rebuild the module
before testing it.
* `Issue #306`_: Even if 2to3 is used, we build in-place under Python 2.
* `Issue #307`_: Prints the full path when .svn/entries is broken.
* `Issue #313`_: Support for sdist subcommands (Python 2.7)
* `Issue #314`_: test_local_index() would fail an OS X.
* `Issue #310`_: Non-ascii characters in a namespace __init__.py causes errors.
* `Issue #218`_: Improved documentation on behavior of `package_data` and
`include_package_data`. Files indicated by `package_data` are now included
in the manifest.
* `distribute_setup.py` now allows a `--download-base` argument for retrieving
distribute from a specified location.

------
0.6.28
------

* `Issue #294`_: setup.py can now be invoked from any directory.
* Scripts are now installed honoring the umask.
* Added support for .dist-info directories.
* `Issue #283`_: Fix and disable scanning of `*.pyc` / `*.pyo` files on
Python 3.3.

------
0.6.27
------

* Support current snapshots of CPython 3.3.
* Distribute now recognizes README.rst as a standard, default readme file.
* Exclude 'encodings' modules when removing modules from sys.modules.
Workaround for #285.
* `Issue #231`_: Don't fiddle with system python when used with buildout
(bootstrap.py)

------
0.6.26
------

* `Issue #183`_: Symlinked files are now extracted from source distributions.
* `Issue #227`_: Easy_install fetch parameters are now passed during the
installation of a source distribution; now fulfillment of setup_requires
dependencies will honor the parameters passed to easy_install.

------
0.6.25
------

* `Issue #258`_: Workaround a cache issue
* `Issue #260`_: distribute_setup.py now accepts the --user parameter for
Python 2.6 and later.
* `Issue #262`_: package_index.open_with_auth no longer throws LookupError
on Python 3.
* `Issue #269`_: AttributeError when an exception occurs reading Manifest.in
on late releases of Python.
* `Issue #272`_: Prevent TypeError when namespace package names are unicode
and single-install-externally-managed is used. Also fixes PIP `issue
449`_.
* `Issue #273`_: Legacy script launchers now install with Python2/3 support.

------
0.6.24
------

* `Issue #249`_: Added options to exclude 2to3 fixers

------
0.6.23
------

* `Issue #244`_: Fixed a test
* `Issue #243`_: Fixed a test
* `Issue #239`_: Fixed a test
* `Issue #240`_: Fixed a test
* `Issue #241`_: Fixed a test
* `Issue #237`_: Fixed a test
* `Issue #238`_: easy_install now uses 64bit executable wrappers on 64bit Python
* `Issue #208`_: Fixed parsed_versions, it now honors post-releases as noted in the documentation
* `Issue #207`_: Windows cli and gui wrappers pass CTRL-C to child python process
* `Issue #227`_: easy_install now passes its arguments to setup.py bdist_egg
* `Issue #225`_: Fixed a NameError on Python 2.5, 2.4

------
0.6.21
------

* `Issue #225`_: FIxed a regression on py2.4

------
0.6.20
------

* `Issue #135`_: Include url in warning when processing URLs in package_index.
* `Issue #212`_: Fix issue where easy_instal fails on Python 3 on windows installer.
* `Issue #213`_: Fix typo in documentation.

------
0.6.19
------

* `Issue 206`_: AttributeError: 'HTTPMessage' object has no attribute 'getheaders'

------
0.6.18
------

* `Issue 210`_: Fixed a regression introduced by `Issue 204`_ fix.

------
0.6.17
------

* Support 'DISTRIBUTE_DISABLE_VERSIONED_EASY_INSTALL_SCRIPT' environment
variable to allow to disable installation of easy_install-${version} script.
* Support Python >=3.1.4 and >=3.2.1.
* `Issue 204`_: Don't try to import the parent of a namespace package in
declare_namespace
* `Issue 196`_: Tolerate responses with multiple Content-Length headers
* `Issue 205`_: Sandboxing doesn't preserve working_set. Leads to setup_requires
problems.

------
0.6.16
------

* Builds sdist gztar even on Windows (avoiding `Issue 193`_).
* `Issue 192`_: Fixed metadata omitted on Windows when package_dir
specified with forward-slash.
* `Issue 195`_: Cython build support.
* `Issue 200`_: Issues with recognizing 64-bit packages on Windows.

------
0.6.15
------

* Fixed typo in bdist_egg
* Several issues under Python 3 has been solved.
* `Issue 146`_: Fixed missing DLL files after easy_install of windows exe package.

------
0.6.14
------

* `Issue 170`_: Fixed unittest failure. Thanks to Toshio.
* `Issue 171`_: Fixed race condition in unittests cause deadlocks in test suite.
* `Issue 143`_: Fixed a lookup issue with easy_install.
Thanks to David and Zooko.
* `Issue 174`_: Fixed the edit mode when its used with setuptools itself

------
0.6.13
------

* `Issue 160`_: 2.7 gives ValueError("Invalid IPv6 URL")
* `Issue 150`_: Fixed using ~/.local even in a --no-site-packages virtualenv
* `Issue 163`_: scan index links before external links, and don't use the md5 when
comparing two distributions

------
0.6.12
------

* `Issue 149`_: Fixed various failures on 2.3/2.4

------
0.6.11
------

* Found another case of SandboxViolation - fixed
* `Issue 15`_ and 48: Introduced a socket timeout of 15 seconds on url openings
* Added indexsidebar.html into MANIFEST.in
* `Issue 108`_: Fixed TypeError with Python3.1
* `Issue 121`_: Fixed --help install command trying to actually install.
* `Issue 112`_: Added an os.makedirs so that Tarek's solution will work.
* `Issue 133`_: Added --no-find-links to easy_install
* Added easy_install --user
* `Issue 100`_: Fixed develop --user not taking '.' in PYTHONPATH into account
* `Issue 134`_: removed spurious UserWarnings. Patch by VanLindberg
* `Issue 138`_: cant_write_to_target error when setup_requires is used.
* `Issue 147`_: respect the sys.dont_write_bytecode flag

------
0.6.10
------

* Reverted change made for the DistributionNotFound exception because
zc.buildout uses the exception message to get the name of the
distribution.

-----
0.6.9
-----

* `Issue 90`_: unknown setuptools version can be added in the working set
* `Issue 87`_: setupt.py doesn't try to convert distribute_setup.py anymore
Initial Patch by arfrever.
* `Issue 89`_: added a side bar with a download link to the doc.
* `Issue 86`_: fixed missing sentence in pkg_resources doc.
* Added a nicer error message when a DistributionNotFound is raised.
* `Issue 80`_: test_develop now works with Python 3.1
* `Issue 93`_: upload_docs now works if there is an empty sub-directory.
* `Issue 70`_: exec bit on non-exec files
* `Issue 99`_: now the standalone easy_install command doesn't uses a
"setup.cfg" if any exists in the working directory. It will use it
only if triggered by ``install_requires`` from a setup.py call
(install, develop, etc).
* `Issue 101`_: Allowing ``os.devnull`` in Sandbox
* `Issue 92`_: Fixed the "no eggs" found error with MacPort
(platform.mac_ver() fails)
* `Issue 103`_: test_get_script_header_jython_workaround not run
anymore under py3 with C or POSIX local. Contributed by Arfrever.
* `Issue 104`_: remvoved the assertion when the installation fails,
with a nicer message for the end user.
* `Issue 100`_: making sure there's no SandboxViolation when
the setup script patches setuptools.

-----
0.6.8
-----

* Added "check_packages" in dist. (added in Setuptools 0.6c11)
* Fixed the DONT_PATCH_SETUPTOOLS state.

-----
0.6.7
-----

* `Issue 58`_: Added --user support to the develop command
* `Issue 11`_: Generated scripts now wrap their call to the script entry point
in the standard "if name == 'main'"
* Added the 'DONT_PATCH_SETUPTOOLS' environment variable, so virtualenv
can drive an installation that doesn't patch a global setuptools.
* Reviewed unladen-swallow specific change from
http://code.google.com/p/unladen-swallow/source/detail?spec=svn875&r=719
and determined that it no longer applies. Distribute should work fine with
Unladen Swallow 2009Q3.
* `Issue 21`_: Allow PackageIndex.open_url to gracefully handle all cases of a
httplib.HTTPException instead of just InvalidURL and BadStatusLine.
* Removed virtual-python.py from this distribution and updated documentation
to point to the actively maintained virtualenv instead.
* `Issue 64`_: use_setuptools no longer rebuilds the distribute egg every
time it is run
* use_setuptools now properly respects the requested version
* use_setuptools will no longer try to import a distribute egg for the
wrong Python version
* `Issue 74`_: no_fake should be True by default.
* `Issue 72`_: avoid a bootstrapping issue with easy_install -U

-----
0.6.6
-----

* Unified the bootstrap file so it works on both py2.x and py3k without 2to3
(patch by Holger Krekel)

-----
0.6.5
-----

* `Issue 65`_: cli.exe and gui.exe are now generated at build time,
depending on the platform in use.

* `Issue 67`_: Fixed doc typo (PEP 381/382)

* Distribute no longer shadows setuptools if we require a 0.7-series
setuptools. And an error is raised when installing a 0.7 setuptools with
distribute.

* When run from within buildout, no attempt is made to modify an existing
setuptools egg, whether in a shared egg directory or a system setuptools.

* Fixed a hole in sandboxing allowing builtin file to write outside of
the sandbox.

-----
0.6.4
-----

* Added the generation of `distribute_setup_3k.py` during the release.
This closes `issue #52`_.

* Added an upload_docs command to easily upload project documentation to
PyPI's http://packages.python.org. This close `issue #56`_.

* Fixed a bootstrap bug on the use_setuptools() API.

-----
0.6.3
-----

setuptools
==========

* Fixed a bunch of calls to file() that caused crashes on Python 3.

bootstrapping
=============

* Fixed a bug in sorting that caused bootstrap to fail on Python 3.

-----
0.6.2
-----

setuptools
==========

* Added Python 3 support; see docs/python3.txt.
This closes http://bugs.python.org/setuptools/issue39.

* Added option to run 2to3 automatically when installing on Python 3.
This closes `issue #31`_.

* Fixed invalid usage of requirement.parse, that broke develop -d.
This closes http://bugs.python.org/setuptools/issue44.

* Fixed script launcher for 64-bit Windows.
This closes http://bugs.python.org/setuptools/issue2.

* KeyError when compiling extensions.
This closes http://bugs.python.org/setuptools/issue41.

bootstrapping
=============

* Fixed bootstrap not working on Windows. This closes `issue #49`_.

* Fixed 2.6 dependencies. This closes `issue #50`_.

* Make sure setuptools is patched when running through easy_install
This closes http://bugs.python.org/setuptools/issue40.

-----
0.6.1
-----

setuptools
==========

* package_index.urlopen now catches BadStatusLine and malformed url errors.
This closes `issue #16`_ and `issue #18`_.

* zip_ok is now False by default. This closes
http://bugs.python.org/setuptools/issue33.

* Fixed invalid URL error catching. http://bugs.python.org/setuptools/issue20.

* Fixed invalid bootstraping with easy_install installation (`issue #40`_).
Thanks to Florian Schulze for the help.

* Removed buildout/bootstrap.py. A new repository will create a specific
bootstrap.py script.


bootstrapping
=============

* The boostrap process leave setuptools alone if detected in the system
and --root or --prefix is provided, but is not in the same location.
This closes `issue #10`_.

---
0.6
---

setuptools
==========

* Packages required at build time where not fully present at install time.
This closes `issue #12`_.

* Protected against failures in tarfile extraction. This closes `issue #10`_.

* Made Jython api_tests.txt doctest compatible. This closes `issue #7`_.

* sandbox.py replaced builtin type file with builtin function open. This
closes `issue #6`_.

* Immediately close all file handles. This closes `issue #3`_.

* Added compatibility with Subversion 1.6. This references `issue #1`_.

pkg_resources
=============

* Avoid a call to /usr/bin/sw_vers on OSX and use the official platform API
instead. Based on a patch from ronaldoussoren. This closes `issue #5`_.

* Fixed a SandboxViolation for mkdir that could occur in certain cases.
This closes `issue #13`_.

* Allow to find_on_path on systems with tight permissions to fail gracefully.
This closes `issue #9`_.

* Corrected inconsistency between documentation and code of add_entry.
This closes `issue #8`_.

* Immediately close all file handles. This closes `issue #3`_.

easy_install
============

* Immediately close all file handles. This closes `issue #3`_.


.. _`Issue #135`: http://bitbucket.org/tarek/distribute/issue/135
.. _`Issue #183`: http://bitbucket.org/tarek/distribute/issue/183
.. _`Issue #207`: http://bitbucket.org/tarek/distribute/issue/207
.. _`Issue #208`: http://bitbucket.org/tarek/distribute/issue/208
.. _`Issue #212`: http://bitbucket.org/tarek/distribute/issue/212
.. _`Issue #213`: http://bitbucket.org/tarek/distribute/issue/213
.. _`Issue #218`: http://bitbucket.org/tarek/distribute/issue/218
.. _`Issue #225`: http://bitbucket.org/tarek/distribute/issue/225
.. _`Issue #225`: http://bitbucket.org/tarek/distribute/issue/225
.. _`Issue #227`: http://bitbucket.org/tarek/distribute/issue/227
.. _`Issue #227`: http://bitbucket.org/tarek/distribute/issue/227
.. _`Issue #231`: http://bitbucket.org/tarek/distribute/issue/231
.. _`Issue #237`: http://bitbucket.org/tarek/distribute/issue/237
.. _`Issue #238`: http://bitbucket.org/tarek/distribute/issue/238
.. _`Issue #239`: http://bitbucket.org/tarek/distribute/issue/239
.. _`Issue #240`: http://bitbucket.org/tarek/distribute/issue/240
.. _`Issue #241`: http://bitbucket.org/tarek/distribute/issue/241
.. _`Issue #243`: http://bitbucket.org/tarek/distribute/issue/243
.. _`Issue #244`: http://bitbucket.org/tarek/distribute/issue/244
.. _`Issue #249`: http://bitbucket.org/tarek/distribute/issue/249
.. _`Issue #258`: http://bitbucket.org/tarek/distribute/issue/258
.. _`Issue #260`: http://bitbucket.org/tarek/distribute/issue/260
.. _`Issue #262`: http://bitbucket.org/tarek/distribute/issue/262
.. _`Issue #269`: http://bitbucket.org/tarek/distribute/issue/269
.. _`Issue #272`: http://bitbucket.org/tarek/distribute/issue/272
.. _`Issue #273`: http://bitbucket.org/tarek/distribute/issue/273
.. _`Issue #283`: http://bitbucket.org/tarek/distribute/issue/283
.. _`Issue #283`: http://bitbucket.org/tarek/distribute/issue/283
.. _`Issue #294`: http://bitbucket.org/tarek/distribute/issue/294
.. _`Issue #299`: http://bitbucket.org/tarek/distribute/issue/299
.. _`Issue #301`: http://bitbucket.org/tarek/distribute/issue/301
.. _`Issue #303`: http://bitbucket.org/tarek/distribute/issue/303
.. _`Issue #304`: http://bitbucket.org/tarek/distribute/issue/304
.. _`Issue #305`: http://bitbucket.org/tarek/distribute/issue/305
.. _`Issue #306`: http://bitbucket.org/tarek/distribute/issue/306
.. _`Issue #307`: http://bitbucket.org/tarek/distribute/issue/307
.. _`Issue #310`: http://bitbucket.org/tarek/distribute/issue/310
.. _`Issue #311`: http://bitbucket.org/tarek/distribute/issue/311
.. _`Issue #313`: http://bitbucket.org/tarek/distribute/issue/313
.. _`Issue #314`: http://bitbucket.org/tarek/distribute/issue/314
.. _`Issue #320`: http://bitbucket.org/tarek/distribute/issue/320
.. _`Issue #323`: http://bitbucket.org/tarek/distribute/issue/323
.. _`Issue #326`: http://bitbucket.org/tarek/distribute/issue/326
.. _`Issue #327`: http://bitbucket.org/tarek/distribute/issue/327
.. _`Issue #328`: http://bitbucket.org/tarek/distribute/issue/328
.. _`Issue #334`: http://bitbucket.org/tarek/distribute/issue/334
.. _`Issue #375`: http://bitbucket.org/tarek/distribute/issue/375
.. _`Issue #379`: http://bitbucket.org/tarek/distribute/issue/379
.. _`Issue 100`: http://bitbucket.org/tarek/distribute/issue/100
.. _`Issue 100`: http://bitbucket.org/tarek/distribute/issue/100
.. _`Issue 101`: http://bitbucket.org/tarek/distribute/issue/101
.. _`Issue 103`: http://bitbucket.org/tarek/distribute/issue/103
.. _`Issue 104`: http://bitbucket.org/tarek/distribute/issue/104
.. _`Issue 108`: http://bitbucket.org/tarek/distribute/issue/108
.. _`Issue 11`: http://bitbucket.org/tarek/distribute/issue/11
.. _`Issue 112`: http://bitbucket.org/tarek/distribute/issue/112
.. _`Issue 121`: http://bitbucket.org/tarek/distribute/issue/121
.. _`Issue 133`: http://bitbucket.org/tarek/distribute/issue/133
.. _`Issue 134`: http://bitbucket.org/tarek/distribute/issue/134
.. _`Issue 138`: http://bitbucket.org/tarek/distribute/issue/138
.. _`Issue 143`: http://bitbucket.org/tarek/distribute/issue/143
.. _`Issue 146`: http://bitbucket.org/tarek/distribute/issue/146
.. _`Issue 147`: http://bitbucket.org/tarek/distribute/issue/147
.. _`Issue 149`: http://bitbucket.org/tarek/distribute/issue/149
.. _`Issue 15`: http://bitbucket.org/tarek/distribute/issue/15
.. _`Issue 150`: http://bitbucket.org/tarek/distribute/issue/150
.. _`Issue 160`: http://bitbucket.org/tarek/distribute/issue/160
.. _`Issue 163`: http://bitbucket.org/tarek/distribute/issue/163
.. _`Issue 170`: http://bitbucket.org/tarek/distribute/issue/170
.. _`Issue 171`: http://bitbucket.org/tarek/distribute/issue/171
.. _`Issue 174`: http://bitbucket.org/tarek/distribute/issue/174
.. _`Issue 192`: http://bitbucket.org/tarek/distribute/issue/192
.. _`Issue 193`: http://bitbucket.org/tarek/distribute/issue/193
.. _`Issue 195`: http://bitbucket.org/tarek/distribute/issue/195
.. _`Issue 196`: http://bitbucket.org/tarek/distribute/issue/196
.. _`Issue 200`: http://bitbucket.org/tarek/distribute/issue/200
.. _`Issue 204`: http://bitbucket.org/tarek/distribute/issue/204
.. _`Issue 204`: http://bitbucket.org/tarek/distribute/issue/204
.. _`Issue 205`: http://bitbucket.org/tarek/distribute/issue/205
.. _`Issue 206`: http://bitbucket.org/tarek/distribute/issue/206
.. _`Issue 21`: http://bitbucket.org/tarek/distribute/issue/21
.. _`Issue 210`: http://bitbucket.org/tarek/distribute/issue/210
.. _`Issue 58`: http://bitbucket.org/tarek/distribute/issue/58
.. _`Issue 64`: http://bitbucket.org/tarek/distribute/issue/64
.. _`Issue 65`: http://bitbucket.org/tarek/distribute/issue/65
.. _`Issue 67`: http://bitbucket.org/tarek/distribute/issue/67
.. _`Issue 70`: http://bitbucket.org/tarek/distribute/issue/70
.. _`Issue 72`: http://bitbucket.org/tarek/distribute/issue/72
.. _`Issue 74`: http://bitbucket.org/tarek/distribute/issue/74
.. _`Issue 80`: http://bitbucket.org/tarek/distribute/issue/80
.. _`Issue 86`: http://bitbucket.org/tarek/distribute/issue/86
.. _`Issue 87`: http://bitbucket.org/tarek/distribute/issue/87
.. _`Issue 89`: http://bitbucket.org/tarek/distribute/issue/89
.. _`Issue 90`: http://bitbucket.org/tarek/distribute/issue/90
.. _`Issue 92`: http://bitbucket.org/tarek/distribute/issue/92
.. _`Issue 93`: http://bitbucket.org/tarek/distribute/issue/93
.. _`Issue 99`: http://bitbucket.org/tarek/distribute/issue/99
.. _`issue
449`: http://bitbucket.org/tarek/distribute/issue/449
.. _`issue #1`: http://bitbucket.org/tarek/distribute/issue/1
.. _`issue #10`: http://bitbucket.org/tarek/distribute/issue/10
.. _`issue #10`: http://bitbucket.org/tarek/distribute/issue/10
.. _`issue #12`: http://bitbucket.org/tarek/distribute/issue/12
.. _`issue #13`: http://bitbucket.org/tarek/distribute/issue/13
.. _`issue #16`: http://bitbucket.org/tarek/distribute/issue/16
.. _`issue #18`: http://bitbucket.org/tarek/distribute/issue/18
.. _`issue #3`: http://bitbucket.org/tarek/distribute/issue/3
.. _`issue #3`: http://bitbucket.org/tarek/distribute/issue/3
.. _`issue #3`: http://bitbucket.org/tarek/distribute/issue/3
.. _`issue #31`: http://bitbucket.org/tarek/distribute/issue/31
.. _`issue #40`: http://bitbucket.org/tarek/distribute/issue/40
.. _`issue #49`: http://bitbucket.org/tarek/distribute/issue/49
.. _`issue #5`: http://bitbucket.org/tarek/distribute/issue/5
.. _`issue #50`: http://bitbucket.org/tarek/distribute/issue/50
.. _`issue #52`: http://bitbucket.org/tarek/distribute/issue/52
.. _`issue #56`: http://bitbucket.org/tarek/distribute/issue/56
.. _`issue #6`: http://bitbucket.org/tarek/distribute/issue/6
.. _`issue #7`: http://bitbucket.org/tarek/distribute/issue/7
.. _`issue #8`: http://bitbucket.org/tarek/distribute/issue/8
.. _`issue #9`: http://bitbucket.org/tarek/distribute/issue/9