django-cors-headers 2.3.0

Requirements

Tested with all combinations of:

• Python: 2.7, 3.6

• Django: 1.8, 1.9, 1.10, 1.11, 2.0

Setup

Install from pip:

pip install django-cors-headers

and then add it to your installed apps:

INSTALLED_APPS = (
    ...
    'corsheaders',
    ...
)

You will also need to add a middleware class to listen in on responses:

MIDDLEWARE = [  # Or MIDDLEWARE_CLASSES on Django < 1.10
    ...
    'corsheaders.middleware.CorsMiddleware',
    'django.middleware.common.CommonMiddleware',
    ...
]

CorsMiddleware should be placed as high as possible, especially before any middleware that can generate responses such as Django’s CommonMiddleware or Whitenoise’s WhiteNoiseMiddleware. If it is not before, it will not be able to add the CORS headers to these responses.

Also if you are using CORS_REPLACE_HTTPS_REFERER it should be placed before Django’s CsrfViewMiddleware (see more below).

Configuration

Configure the middleware’s behaviour in your Django settings. You must add the hosts that are allowed to do cross-site requests to CORS_ORIGIN_WHITELIST, or set CORS_ORIGIN_ALLOW_ALL to True to allow all hosts.

CORS_ORIGIN_WHITELIST = (
    'google.com',
    'hostname.example.com',
    'localhost:8000',
    '127.0.0.1:9000'
)

CORS_ORIGIN_REGEX_WHITELIST = (r'^(https?://)?(\w+\.)?google\.com$', )

CORS_URLS_REGEX = r'^/api/.*$'

CORS_ALLOW_METHODS = (
    'DELETE',
    'GET',
    'OPTIONS',
    'PATCH',
    'POST',
    'PUT',
)

from corsheaders.defaults import default_methods

CORS_ALLOW_METHODS = default_methods + (
    'POKE',
)

CORS_ALLOW_HEADERS = (
    'accept',
    'accept-encoding',
    'authorization',
    'content-type',
    'dnt',
    'origin',
    'user-agent',
    'x-csrftoken',
    'x-requested-with',
)

from corsheaders.defaults import default_headers

CORS_ALLOW_HEADERS = default_headers + (
    'my-custom-header',
)

CSRF Integration

Most sites will need to take advantage of the Cross-Site Request Forgery protection that Django offers. CORS and CSRF are separate, and Django has no way of using your CORS configuration to exempt sites from the Referer checking that it does on secure requests. The way to do that is with its CSRF_TRUSTED_ORIGINS setting. For example:

CORS_ORIGIN_WHITELIST = (
    'read.only.com',
    'change.allowed.com',
)

CSRF_TRUSTED_ORIGINS = (
    'change.allowed.com',
)

MIDDLEWARE_CLASSES = [
    ...
    'corsheaders.middleware.CorsMiddleware',
    ...
    'django.middleware.csrf.CsrfViewMiddleware',
    'corsheaders.middleware.CorsPostCsrfMiddleware',
    ...
]

Signals

If you have a use case that requires more than just the above configuration, you can attach code to check if a given request should be allowed. For example, this can be used to read the list of origins you allow from a model. Attach any number of handlers to the check_request_enabled Django signal, which provides the request argument (use **kwargs in your handler to protect against any future arguments being added). If any handler attached to the signal returns a truthy value, the request will be allowed.

For example you might define a handler like this:

# myapp/handlers.py
from corsheaders.signals import check_request_enabled

from .models import MySite

def cors_allow_mysites(sender, request, **kwargs):
    return MySite.objects.filter(host=request.host).exists()

check_request_enabled.connect(cors_allow_mysites)

Then connect it at app ready time using a Django AppConfig:

# myapp/__init__.py

default_app_config = 'myapp.apps.MyAppConfig'

# myapp/apps.py

from django.apps import AppConfig

class MyAppConfig(AppConfig):
    name = 'myapp'

    def ready(self):
        # Makes sure all signal handlers are connected
        from . import handlers  # noqa

A common use case for the signal is to allow all origins to access a subset of URL’s, whilst allowing a normal set of origins to access all URL’s. This isn’t possible using just the normal configuration, but it can be achieved with a signal handler.

First set CORS_ORIGIN_WHITELIST to the list of trusted origins that are allowed to access every URL, and then add a handler to check_request_enabled to allow CORS regardless of the origin for the unrestricted URL’s. For example:

# myapp/handlers.py
from corsheaders.signals import check_request_enabled

def cors_allow_api_to_everyone(sender, request, **kwargs):
    return request.path.startswith('/api/')

check_request_enabled.connect(cors_allow_api_to_everyone)

Credits

django-cors-headers was created by Otto Yiu (@ottoyiu) and has been worked on by 25+ contributors. Thanks to every contributor, and if you want to get involved please don’t hesitate to make a pull request.

Pending

2.3.0 (2018-06-27)

• Match CORS_URLS_REGEX to request.path_info instead of request.path, so the patterns can work without knowing the site’s path prefix at configuration time.

2.2.1 (2018-06-27)

• Add Content-Length header to CORS preflight requests. This fixes issues with some HTTP proxies and servers, e.g. AWS Elastic Beanstalk.

2.2.0 (2018-02-28)

• Django 2.0 compatibility. Again there were no changes to the actual library code, so previous versions probably work.

• Ensured that request._cors_enabled is always a bool() - previously it could be set to a regex match object.

2.1.0 (2017-05-28)

• Django 1.11 compatibility. There were no changes to the actual library code, so previous versions probably work, though they weren’t properly tested on 1.11.

2.0.2 (2017-02-06)

• Fix when the check for CORS_MODEL is done to allow it to properly add the headers and respond to OPTIONS requests.

2.0.1 (2017-01-29)

• Add support for specifying ‘null’ in CORS_ORIGIN_WHITELIST.

2.0.0 (2017-01-07)

• Remove previously undocumented CorsModel as it was causing migration issues. For backwards compatibility, any users previously using CorsModel should create a model in their own app that inherits from the new AbstractCorsModel, and to keep using the same data, set the model’s db_table to ‘corsheaders_corsmodel’. Users not using CorsModel will find they have an unused table that they can drop.

• Make sure that Access-Control-Allow-Credentials is in the response if the client asks for it.

1.3.1 (2016-11-09)

• Fix a bug with the single check if CORS enabled added in 1.3.0: on Django < 1.10 shortcut responses could be generated by middleware above CorsMiddleware, before it processed the request, failing with an AttributeError for request._cors_enabled. Also clarified the docs that CorsMiddleware should be kept as high as possible in your middleware stack, above any middleware that can generate such responses.

1.3.0 (2016-11-06)

• Add checks to validate the types of the settings.

• Add the ‘Do Not Track’ header 'DNT' to the default for CORS_ALLOW_HEADERS.

• Add ‘Origin’ to the ‘Vary’ header of outgoing requests when not allowing all origins, as per the CORS spec. Note this changes the way HTTP caching works with your CORS-enabled responses.

• Check whether CORS should be enabled on a request only once. This has had a minor change on the conditions where any custom signals will be called - signals will now always be called before HTTP_REFERER gets replaced, whereas before they could be called before and after. Also this attaches the attribute _cors_enabled to request - please take care that other code you’re running does not remove it.

1.2.2 (2016-10-05)

• Add CorsModel.__str__ for human-readable text

• Add a signal that allows you to add code for more intricate control over when CORS headers are added.

1.2.1 (2016-09-30)

• Made settings dynamically respond to changes, and which allows you to import the defaults for headers and methods in order to extend them.

1.2.0 (2016-09-28)

• Drop Python 2.6 support.

• Drop Django 1.3-1.7 support, as they are no longer supported.

• Confirmed Django 1.9 support (no changes outside of tests were necessary).

• Added Django 1.10 support.

• Package as a universal wheel.

1.1.0 (2014-12-15)

• django-cors-header now supports Django 1.8 with its new application loading system! Thanks @jpadilla for making this possible and sorry for the delay in making a release.

1.0.0 (2014-12-13)

django-cors-headers is all grown-up :) Since it’s been used in production for many many deployments, I think it’s time we mark this as a stable release.

• Switching this middleware versioning over to semantic versioning

• #46 add user-agent and accept-encoding default headers

• #45 pep-8 this big boy up

0.13 (2014-08-14)

• Add support for Python 3

• Updated tests

• Improved docuemntation

• Small bugfixes

0.12 (2013-09-24)

• Added an option to selectively enable CORS only for specific URLs

0.11 (2013-09-24)

• Added the ability to specify a regex for whitelisting many origin hostnames at once

0.10 (2013-09-05)

• Introduced port distinction for origin checking

• Use urlparse for Python 3 support

• Added testcases to project

0.06 (2013-02-18)

• Add support for exposed response headers

0.05 (2013-01-26)

• Fixed middleware to ensure correct response for CORS preflight requests

0.04 (2013-01-25)

• Add Access-Control-Allow-Credentials control to simple requests

0.03 (2013-01-22)

• Bugfix to repair mismatched default variable names

0.02 (2013-01-19)

• Refactor/pull defaults into separate file

0.01 (2013-01-19)

• Initial release