Pure-Python ECDSA

This is an easy-to-use implementation of ECDSA cryptography (Elliptic Curve Digital Signature Algorithm), implemented purely in Python, released under the MIT license. With this library, you can quickly create keypairs (signing key and verifying key), sign messages, and verify the signatures. The keys and signatures are very short, making them easy to handle and incorporate into other protocols.

Features

This library provides key generation, signing, and verifying, for five popular NIST "Suite B" GF(p) (prime field) curves, with key lengths of 192, 224, 256, 384, and 521 bits. The "short names" for these curves, as known by the OpenSSL tool (openssl ecparam -list_curves), are: prime192v1, secp224r1, prime256v1, secp384r1, and secp521r1. It includes the 256-bit curve secp256k1 used by Bitcoin. There is also support for the regular (non-twisted) variants of Brainpool curves from 160 to 512 bits. The "short names" of those curves are: brainpoolP160r1, brainpoolP192r1, brainpoolP224r1, brainpoolP256r1, brainpoolP320r1, brainpoolP384r1, brainpoolP512r1. No other curves are included, but it is not too hard to add support for more curves over prime fields.

Dependencies

This library uses only Python and the 'six' package. It is compatible with Python 2.6, 2.7 and 3.3+. It also supports execution on the alternative implementations like pypy and pypy3.

If gmpy2 or gmpy is installed, they will be used for faster arithmetic. Either of them can be installed after this library is installed, python-ecdsa will detect their presence on start-up and use them automatically.

To run the OpenSSL compatibility tests, the 'openssl' tool must be in your PATH. This release has been tested successfully against OpenSSL 0.9.8o, 1.0.0a, 1.0.2f and 1.1.1d (among others).

Installation

This library is available on PyPI, it's recommended to install it using pip:

pip install ecdsa

In case higher performance is wanted and using native code is not a problem, it's possible to specify installation together with gmpy2:

pip install ecdsa[gmpy2]

or (slower, legacy option):

pip install ecdsa[gmpy]

Speed

The following table shows how long this library takes to generate keypairs (keygen), to sign data (sign), and to verify those signatures (verify). All those values are in seconds. For convenience, the inverses of those values are also provided: how many keys per second can be generated (keygen/s), how many signatures can be made per second (sign/s) and how many signatures can be verified per second (verify/s). The size of raw signature (generally the smallest way a signature can be encoded) is also provided in the siglen column. Use tox -e speed to generate this table on your own computer. On an Intel Core i7 4790K @ 4.0GHz I'm getting the following performance:

                  siglen    keygen   keygen/s      sign     sign/s    verify   verify/s
        NIST192p:     48   0.00035s   2893.02   0.00038s   2620.53   0.00069s   1458.92
        NIST224p:     56   0.00043s   2307.11   0.00048s   2092.00   0.00088s   1131.33
        NIST256p:     64   0.00056s   1793.70   0.00061s   1639.87   0.00113s    883.79
        NIST384p:     96   0.00116s    864.33   0.00124s    806.29   0.00233s    429.87
        NIST521p:    132   0.00221s    452.16   0.00234s    427.31   0.00460s    217.19
       SECP256k1:     64   0.00056s   1772.65   0.00061s   1628.73   0.00110s    912.13
 BRAINPOOLP160r1:     40   0.00026s   3801.86   0.00029s   3401.11   0.00052s   1930.47
 BRAINPOOLP192r1:     48   0.00034s   2925.73   0.00038s   2634.34   0.00070s   1438.06
 BRAINPOOLP224r1:     56   0.00044s   2287.98   0.00048s   2083.87   0.00088s   1137.52
 BRAINPOOLP256r1:     64   0.00056s   1774.11   0.00061s   1628.25   0.00112s    890.71
 BRAINPOOLP320r1:     80   0.00081s   1238.18   0.00087s   1146.71   0.00151s    661.95
 BRAINPOOLP384r1:     96   0.00117s    855.47   0.00124s    804.56   0.00241s    414.83
 BRAINPOOLP512r1:    128   0.00223s    447.99   0.00234s    427.49   0.00437s    229.09

                       ecdh     ecdh/s
        NIST192p:   0.00110s    910.70
        NIST224p:   0.00143s    701.17
        NIST256p:   0.00178s    560.44
        NIST384p:   0.00383s    261.03
        NIST521p:   0.00745s    134.23
       SECP256k1:   0.00168s    596.23
 BRAINPOOLP160r1:   0.00085s   1174.02
 BRAINPOOLP192r1:   0.00113s    883.47
 BRAINPOOLP224r1:   0.00145s    687.82
 BRAINPOOLP256r1:   0.00195s    514.03
 BRAINPOOLP320r1:   0.00277s    360.80
 BRAINPOOLP384r1:   0.00412s    242.58
 BRAINPOOLP512r1:   0.00787s    127.12

To test performance with gmpy2 loaded, use tox -e speedgmpy2. On the same machine I'm getting the following performance with gmpy2:

                  siglen    keygen   keygen/s      sign     sign/s    verify   verify/s
        NIST192p:     48   0.00017s   5945.50   0.00018s   5544.66   0.00033s   3002.54
        NIST224p:     56   0.00021s   4742.14   0.00022s   4463.52   0.00044s   2248.59
        NIST256p:     64   0.00024s   4155.73   0.00025s   3994.28   0.00047s   2105.34
        NIST384p:     96   0.00041s   2415.06   0.00043s   2316.41   0.00085s   1177.18
        NIST521p:    132   0.00072s   1391.14   0.00074s   1359.63   0.00140s    716.31
       SECP256k1:     64   0.00024s   4216.50   0.00025s   3994.52   0.00047s   2120.57
 BRAINPOOLP160r1:     40   0.00014s   7038.99   0.00015s   6501.55   0.00029s   3397.79
 BRAINPOOLP192r1:     48   0.00017s   5983.18   0.00018s   5626.08   0.00035s   2843.62
 BRAINPOOLP224r1:     56   0.00021s   4727.54   0.00022s   4464.86   0.00043s   2326.84
 BRAINPOOLP256r1:     64   0.00024s   4221.00   0.00025s   4010.26   0.00049s   2046.40
 BRAINPOOLP320r1:     80   0.00032s   3142.14   0.00033s   3009.15   0.00061s   1652.88
 BRAINPOOLP384r1:     96   0.00041s   2415.98   0.00043s   2340.35   0.00083s   1198.77
 BRAINPOOLP512r1:    128   0.00064s   1567.27   0.00066s   1526.33   0.00127s    788.51

                       ecdh     ecdh/s
        NIST192p:   0.00051s   1960.26
        NIST224p:   0.00067s   1502.97
        NIST256p:   0.00073s   1376.12
        NIST384p:   0.00132s    758.68
        NIST521p:   0.00231s    433.23
       SECP256k1:   0.00072s   1387.18
 BRAINPOOLP160r1:   0.00042s   2366.60
 BRAINPOOLP192r1:   0.00049s   2026.80
 BRAINPOOLP224r1:   0.00067s   1486.52
 BRAINPOOLP256r1:   0.00076s   1310.31
 BRAINPOOLP320r1:   0.00101s    986.16
 BRAINPOOLP384r1:   0.00131s    761.35
 BRAINPOOLP512r1:   0.00211s    473.30

(there's also gmpy version, execute it using tox -e speedgmpy)

For comparison, a highly optimised implementation (including curve-specific assembly for some curves), like the one in OpenSSL 1.1.1d, provides following performance numbers on the same machine. Run openssl speed ecdsa and openssl speed ecdh to reproduce it:

                              sign    verify    sign/s verify/s
 192 bits ecdsa (nistp192)   0.0002s   0.0002s   4785.6   5380.7
 224 bits ecdsa (nistp224)   0.0000s   0.0001s  22475.6   9822.0
 256 bits ecdsa (nistp256)   0.0000s   0.0001s  45069.6  14166.6
 384 bits ecdsa (nistp384)   0.0008s   0.0006s   1265.6   1648.1
 521 bits ecdsa (nistp521)   0.0003s   0.0005s   3753.1   1819.5
 256 bits ecdsa (brainpoolP256r1)   0.0003s   0.0003s   2983.5   3333.2
 384 bits ecdsa (brainpoolP384r1)   0.0008s   0.0007s   1258.8   1528.1
 512 bits ecdsa (brainpoolP512r1)   0.0015s   0.0012s    675.1    860.1

                               op      op/s
 192 bits ecdh (nistp192)   0.0002s   4853.4
 224 bits ecdh (nistp224)   0.0001s  15252.1
 256 bits ecdh (nistp256)   0.0001s  18436.3
 384 bits ecdh (nistp384)   0.0008s   1292.7
 521 bits ecdh (nistp521)   0.0003s   2884.7
 256 bits ecdh (brainpoolP256r1)   0.0003s   3066.5
 384 bits ecdh (brainpoolP384r1)   0.0008s   1298.0
 512 bits ecdh (brainpoolP512r1)   0.0014s    694.8

Keys and signature can be serialized in different ways (see Usage, below). For a NIST192p key, the three basic representations require strings of the following lengths (in bytes):

to_string:  signkey= 24, verifykey= 48, signature=48
compressed: signkey=n/a, verifykey= 25, signature=n/a
DER:        signkey=106, verifykey= 80, signature=55
PEM:        signkey=278, verifykey=162, (no support for PEM signatures)

History

In 2006, Peter Pearson announced his pure-python implementation of ECDSA in a message to sci.crypt, available from his download site. In 2010, Brian Warner wrote a wrapper around this code, to make it a bit easier and safer to use. Hubert Kario then included an implementation of elliptic curve cryptography that uses Jacobian coordinates internally, improving performance about 20-fold. You are looking at the README for this wrapper.

Testing

To run the full test suite, do this:

tox -e coverage

On an Intel Core i7 4790K @ 4.0GHz, the tests take about 16 seconds to execute. The test suite uses hypothesis so there is some inherent variability in the test suite execution time.

One part of test_pyecdsa.py checks compatibility with OpenSSL, by running the "openssl" CLI tool, make sure it's in your PATH if you want to test compatibility with it.

Security

This library was not designed with security in mind. If you are processing data that needs to be protected we suggest you use a quality wrapper around OpenSSL. pyca/cryptography is one example of such a wrapper. The primary use-case of this library is as a portable library for interoperability testing and as a teaching tool.

This library does not protect against side channel attacks.

Do not allow attackers to measure how long it takes you to generate a keypair or sign a message. Do not allow attackers to run code on the same physical machine when keypair generation or signing is taking place (this includes virtual machines). Do not allow attackers to measure how much power your computer uses while generating the keypair or signing a message. Do not allow attackers to measure RF interference coming from your computer while generating a keypair or signing a message. Note: just loading the private key will cause keypair generation. Other operations or attack vectors may also be vulnerable to attacks. For a sophisticated attacker observing just one operation with a private key will be sufficient to completely reconstruct the private key.

Please also note that any Pure-python cryptographic library will be vulnerable to the same side channel attacks. This is because Python does not provide side-channel secure primitives (with the exception of hmac.compare_digest()), making side-channel secure programming impossible.

This library depends upon a strong source of random numbers. Do not use it on a system where os.urandom() does not provide cryptographically secure random numbers.

Usage

You start by creating a SigningKey. You can use this to sign data, by passing in data as a byte string and getting back the signature (also a byte string). You can also ask a SigningKey to give you the corresponding VerifyingKey. The VerifyingKey can be used to verify a signature, by passing it both the data string and the signature byte string: it either returns True or raises BadSignatureError.

from ecdsa import SigningKey
sk = SigningKey.generate() # uses NIST192p
vk = sk.verifying_key
signature = sk.sign(b"message")
assert vk.verify(signature, b"message")

Each SigningKey/VerifyingKey is associated with a specific curve, like NIST192p (the default one). Longer curves are more secure, but take longer to use, and result in longer keys and signatures.

from ecdsa import SigningKey, NIST384p
sk = SigningKey.generate(curve=NIST384p)
vk = sk.verifying_key
signature = sk.sign(b"message")
assert vk.verify(signature, b"message")

The SigningKey can be serialized into several different formats: the shortest is to call s=sk.to_string(), and then re-create it with SigningKey.from_string(s, curve) . This short form does not record the curve, so you must be sure to pass to from_string() the same curve you used for the original key. The short form of a NIST192p-based signing key is just 24 bytes long. If a point encoding is invalid or it does not lie on the specified curve, from_string() will raise MalformedPointError.

from ecdsa import SigningKey, NIST384p
sk = SigningKey.generate(curve=NIST384p)
sk_string = sk.to_string()
sk2 = SigningKey.from_string(sk_string, curve=NIST384p)
print(sk_string.hex())
print(sk2.to_string().hex())

Note: while the methods are called to_string() the type they return is actually bytes, the "string" part is leftover from Python 2.

sk.to_pem() and sk.to_der() will serialize the signing key into the same formats that OpenSSL uses. The PEM file looks like the familiar ASCII-armored "-----BEGIN EC PRIVATE KEY-----" base64-encoded format, and the DER format is a shorter binary form of the same data. SigningKey.from_pem()/.from_der() will undo this serialization. These formats include the curve name, so you do not need to pass in a curve identifier to the deserializer. In case the file is malformed from_der() and from_pem() will raise UnexpectedDER or MalformedPointError.

from ecdsa import SigningKey, NIST384p
sk = SigningKey.generate(curve=NIST384p)
sk_pem = sk.to_pem()
sk2 = SigningKey.from_pem(sk_pem)
# sk and sk2 are the same key

Likewise, the VerifyingKey can be serialized in the same way: vk.to_string()/VerifyingKey.from_string(), to_pem()/from_pem(), and to_der()/from_der(). The same curve= argument is needed for VerifyingKey.from_string().

from ecdsa import SigningKey, VerifyingKey, NIST384p
sk = SigningKey.generate(curve=NIST384p)
vk = sk.verifying_key
vk_string = vk.to_string()
vk2 = VerifyingKey.from_string(vk_string, curve=NIST384p)
# vk and vk2 are the same key

from ecdsa import SigningKey, VerifyingKey, NIST384p
sk = SigningKey.generate(curve=NIST384p)
vk = sk.verifying_key
vk_pem = vk.to_pem()
vk2 = VerifyingKey.from_pem(vk_pem)
# vk and vk2 are the same key

There are a couple of different ways to compute a signature. Fundamentally, ECDSA takes a number that represents the data being signed, and returns a pair of numbers that represent the signature. The hashfunc= argument to sk.sign() and vk.verify() is used to turn an arbitrary string into fixed-length digest, which is then turned into a number that ECDSA can sign, and both sign and verify must use the same approach. The default value is hashlib.sha1, but if you use NIST256p or a longer curve, you can use hashlib.sha256 instead.

There are also multiple ways to represent a signature. The default sk.sign() and vk.verify() methods present it as a short string, for simplicity and minimal overhead. To use a different scheme, use the sk.sign(sigencode=) and vk.verify(sigdecode=) arguments. There are helper functions in the ecdsa.util module that can be useful here.

It is also possible to create a SigningKey from a "seed", which is deterministic. This can be used in protocols where you want to derive consistent signing keys from some other secret, for example when you want three separate keys and only want to store a single master secret. You should start with a uniformly-distributed unguessable seed with about curve.baselen bytes of entropy, and then use one of the helper functions in ecdsa.util to convert it into an integer in the correct range, and then finally pass it into SigningKey.from_secret_exponent(), like this:

import os
from ecdsa import NIST384p, SigningKey
from ecdsa.util import randrange_from_seed__trytryagain

def make_key(seed):
  secexp = randrange_from_seed__trytryagain(seed, NIST384p.order)
  return SigningKey.from_secret_exponent(secexp, curve=NIST384p)

seed = os.urandom(NIST384p.baselen) # or other starting point
sk1a = make_key(seed)
sk1b = make_key(seed)
# note: sk1a and sk1b are the same key
assert sk1a.to_string() == sk1b.to_string()
sk2 = make_key(b"2-"+seed)  # different key
assert sk1a.to_string() != sk2.to_string()

In case the application will verify a lot of signatures made with a single key, it's possible to precompute some of the internal values to make signature verification significantly faster. The break-even point occurs at about 100 signatures verified.

To perform precomputation, you can call the precompute() method on VerifyingKey instance:

from ecdsa import SigningKey, NIST384p
sk = SigningKey.generate(curve=NIST384p)
vk = sk.verifying_key
vk.precompute()
signature = sk.sign(b"message")
assert vk.verify(signature, b"message")

Once precompute() was called, all signature verifications with this key will be faster to execute.

OpenSSL Compatibility

To produce signatures that can be verified by OpenSSL tools, or to verify signatures that were produced by those tools, use:

# openssl ecparam -name prime256v1 -genkey -out sk.pem
# openssl ec -in sk.pem -pubout -out vk.pem
# echo "data for signing" > data
# openssl dgst -sha256 -sign sk.pem -out data.sig data
# openssl dgst -sha256 -verify vk.pem -signature data.sig data
# openssl dgst -sha256 -prverify sk.pem -signature data.sig data

import hashlib
from ecdsa import SigningKey, VerifyingKey
from ecdsa.util import sigencode_der, sigdecode_der

with open("vk.pem") as f:
   vk = VerifyingKey.from_pem(f.read())

with open("data", "rb") as f:
   data = f.read()

with open("data.sig", "rb") as f:
   signature = f.read()

assert vk.verify(signature, data, hashlib.sha256, sigdecode=sigdecode_der)

with open("sk.pem") as f:
   sk = SigningKey.from_pem(f.read(), hashlib.sha256)

new_signature = sk.sign_deterministic(data, sigencode=sigencode_der)

with open("data.sig2", "wb") as f:
   f.write(new_signature)

# openssl dgst -sha256 -verify vk.pem -signature data.sig2 data

Note: if compatibility with OpenSSL 1.0.0 or earlier is necessary, the sigencode_string and sigdecode_string from ecdsa.util can be used for respectively writing and reading the signatures.

The keys also can be written in format that openssl can handle:

from ecdsa import SigningKey, VerifyingKey

with open("sk.pem") as f:
    sk = SigningKey.from_pem(f.read())
with open("sk.pem", "wb") as f:
    f.write(sk.to_pem())

with open("vk.pem") as f:
    vk = VerifyingKey.from_pem(f.read())
with open("vk.pem", "wb") as f:
    f.write(vk.to_pem())

Entropy

Creating a signing key with SigningKey.generate() requires some form of entropy (as opposed to from_secret_exponent/from_string/from_der/from_pem, which are deterministic and do not require an entropy source). The default source is os.urandom(), but you can pass any other function that behaves like os.urandom as the entropy= argument to do something different. This may be useful in unit tests, where you want to achieve repeatable results. The ecdsa.util.PRNG utility is handy here: it takes a seed and produces a strong pseudo-random stream from it:

from ecdsa.util import PRNG
from ecdsa import SigningKey
rng1 = PRNG(b"seed")
sk1 = SigningKey.generate(entropy=rng1)
rng2 = PRNG(b"seed")
sk2 = SigningKey.generate(entropy=rng2)
# sk1 and sk2 are the same key

Likewise, ECDSA signature generation requires a random number, and each signature must use a different one (using the same number twice will immediately reveal the private signing key). The sk.sign() method takes an entropy= argument which behaves the same as SigningKey.generate(entropy=).

Deterministic Signatures

If you call SigningKey.sign_deterministic(data) instead of .sign(data), the code will generate a deterministic signature instead of a random one. This uses the algorithm from RFC6979 to safely generate a unique k value, derived from the private key and the message being signed. Each time you sign the same message with the same key, you will get the same signature (using the same k).

This may become the default in a future version, as it is not vulnerable to failures of the entropy source.

Examples

Create a NIST192p keypair and immediately save both to disk:

from ecdsa import SigningKey
sk = SigningKey.generate()
vk = sk.verifying_key
with open("private.pem", "wb") as f:
    f.write(sk.to_pem())
with open("public.pem", "wb") as f:
    f.write(vk.to_pem())

Load a signing key from disk, use it to sign a message (using SHA-1), and write the signature to disk:

from ecdsa import SigningKey
with open("private.pem") as f:
    sk = SigningKey.from_pem(f.read())
with open("message", "rb") as f:
    message = f.read()
sig = sk.sign(message)
with open("signature", "wb") as f:
    f.write(sig)

Load the verifying key, message, and signature from disk, and verify the signature (assume SHA-1 hash):

from ecdsa import VerifyingKey, BadSignatureError
vk = VerifyingKey.from_pem(open("public.pem").read())
with open("message", "rb") as f:
    message = f.read()
with open("signature", "rb") as f:
    sig = f.read()
try:
    vk.verify(sig, message)
    print "good signature"
except BadSignatureError:
    print "BAD SIGNATURE"

Create a NIST521p keypair:

from ecdsa import SigningKey, NIST521p
sk = SigningKey.generate(curve=NIST521p)
vk = sk.verifying_key

Create three independent signing keys from a master seed:

from ecdsa import NIST192p, SigningKey
from ecdsa.util import randrange_from_seed__trytryagain

def make_key_from_seed(seed, curve=NIST192p):
    secexp = randrange_from_seed__trytryagain(seed, curve.order)
    return SigningKey.from_secret_exponent(secexp, curve)

sk1 = make_key_from_seed("1:%s" % seed)
sk2 = make_key_from_seed("2:%s" % seed)
sk3 = make_key_from_seed("3:%s" % seed)

Load a verifying key from disk and print it using hex encoding in uncompressed and compressed format (defined in X9.62 and SEC1 standards):

from ecdsa import VerifyingKey

with open("public.pem") as f:
    vk = VerifyingKey.from_pem(f.read())

print("uncompressed: {0}".format(vk.to_string("uncompressed").hex()))
print("compressed: {0}".format(vk.to_string("compressed").hex()))

Load a verifying key from a hex string from compressed format, output uncompressed:

from ecdsa import VerifyingKey, NIST256p

comp_str = '022799c0d0ee09772fdd337d4f28dc155581951d07082fb19a38aa396b67e77759'
vk = VerifyingKey.from_string(bytearray.fromhex(comp_str), curve=NIST256p)
print(vk.to_string("uncompressed").hex())

ECDH key exchange with remote party

from ecdsa import ECDH, NIST256p

ecdh = ECDH(curve=NIST256p)
ecdh.generate_private_key()
local_public_key = ecdh.get_public_key()
#send `local_public_key` to remote party and receive `remote_public_key` from remote party
with open("remote_public_key.pem") as e:
    remote_public_key = e.read()
ecdh.load_received_public_key_pem(remote_public_key)
secret = ecdh.generate_sharedsecret_bytes()