energymeter2mqtt

Get values from modbus energy meter to MQTT / HomeAssistant

Energy Meter -> modbus -> RS485-USB-Adapter -> energymeter2mqtt -> MQTT -> Home Assistant

The current focus is on the energy meter "Saia PCD ALD1D5FD" However, the code is kept flexible, so that similar meters can be quickly put into operation.

Quick start

Overview:

• Clone the sources
• Create your config: ./cli.py edit-settings
• Test: ./cli.py print-values
• Setup and start MQTT publishing: sudo ./cli.py systemd-setup

~$ git clone https://github.com/jedie/energymeter2mqtt.git
~$ cd energymeter2mqtt
~/energymeter2mqtt$ ./dev-cli.py --help

Usage: ./cli.py [OPTIONS] COMMAND [ARGS]...

╭─ Options ────────────────────────────────────────────────────────────────────────────────────────╮
│ --help      Show this message and exit.                                                          │
╰──────────────────────────────────────────────────────────────────────────────────────────────────╯
╭─ Commands ───────────────────────────────────────────────────────────────────────────────────────╮
│ debug-settings   Display (anonymized) MQTT server username and password                          │
│ edit-settings    Edit the settings file. On first call: Create the default one.                  │
│ print-registers  Print RAW modbus register data                                                  │
│ print-values     Print all values from the definition in endless loop                            │
│ publish-loop     Publish all values via MQTT to Home Assistant in a endless loop.                │
│ systemd-debug    Print Systemd service template + context + rendered file content.               │
│ systemd-remove   Stops the systemd service and removed the service file. (May need sudo)         │
│ systemd-setup    Write Systemd service file, enable it and (re-)start the service. (May need     │
│                  sudo)                                                                           │
│ systemd-status   Display status of systemd service. (May need sudo)                              │
│ systemd-stop     Stops the systemd service. (May need sudo)                                      │
│ version          Print version and exit                                                          │
╰──────────────────────────────────────────────────────────────────────────────────────────────────╯

start development

~$ git clone https://github.com/jedie/energymeter2mqtt.git
~$ cd energymeter2mqtt
~/energymeter2mqtt$ ./dev-cli.py --help

dev CLI

Usage: ./dev-cli.py [OPTIONS] COMMAND [ARGS]...

╭─ Options ────────────────────────────────────────────────────────────────────────────────────────╮
│ --help      Show this message and exit.                                                          │
╰──────────────────────────────────────────────────────────────────────────────────────────────────╯
╭─ Commands ───────────────────────────────────────────────────────────────────────────────────────╮
│ check-code-style            Check code style by calling darker + flake8                          │
│ coverage                    Run and show coverage.                                               │
│ create-default-settings     Create a default user settings file. (Used by CI pipeline ;)         │
│ fix-code-style              Fix code style of all inverter source code files via darker          │
│ install                     Run pip-sync and install 'inverter' via pip as editable.             │
│ mypy                        Run Mypy (configured in pyproject.toml)                              │
│ publish                     Build and upload this project to PyPi                                │
│ safety                      Run safety check against current requirements files                  │
│ test                        Run unittests                                                        │
│ tox                         Run tox                                                              │
│ update                      Update "requirements*.txt" dependencies files                        │
│ update-test-snapshot-files  Update all test snapshot files (by remove and recreate all snapshot  │
│                             files)                                                               │
│ version                     Print version and exit                                               │
╰──────────────────────────────────────────────────────────────────────────────────────────────────╯