Enviro+

Designed for environmental monitoring, Enviro+ lets you measure air quality (pollutant gases and particulates), temperature, pressure, humidity, light, and noise level. Learn more - https://shop.pimoroni.com/products/enviro-plus

Installing

You are best using the "One-line" install method if you want all of the UART serial configuration for the PMS5003 particulate matter sensor to run automatically.

Note The code in this repository supports both the Enviro+ and Enviro Mini boards. The Enviro Mini board does not have the Gas sensor or the breakout for the PM sensor.

:warning: This library now supports Python 3 only, Python 2 is EOL - https://www.python.org/doc/sunset-python-2/

One-line (Installs from GitHub)

curl -sSL https://get.pimoroni.com/enviroplus | bash

Note report issues with one-line installer here: https://github.com/pimoroni/get

Or... Install and configure dependencies from GitHub:

• git clone https://github.com/pimoroni/enviroplus-python
• cd enviroplus-python
• sudo ./install.sh

Note Raspbian/Raspberry Pi OS Lite users may first need to install git: sudo apt install git

Or... Install from PyPi and configure manually:

• Run sudo python3 -m pip install enviroplus

Note this will not perform any of the required configuration changes on your Pi, you may additionally need to:

• Enable i2c: raspi-config nonint do_i2c 0
• Enable SPI: raspi-config nonint do_spi 0

And if you're using a PMS5003 sensor you will need to:

• Enable serial: raspi-config nonint set_config_var enable_uart 1 /boot/config.txt
• Disable serial terminal: sudo raspi-config nonint do_serial 1
• Add dtoverlay=pi3-miniuart-bt to your /boot/config.txt

And install additional dependencies:

sudo apt install python3-numpy python3-smbus python3-pil python3-setuptools

Alternate Software & User Projects

• Enviro Plus Dashboard - https://gitlab.com/dedSyn4ps3/enviroplus-dashboard - A React-based web dashboard for viewing sensor data
• Enviro+ Example Projects - https://gitlab.com/dedSyn4ps3/enviroplus-python-projects - Includes original examples plus code to stream to Adafruit IO (more projects coming soon)
• enviro monitor - https://github.com/roscoe81/enviro-monitor
• mqtt-all - https://github.com/robmarkcole/rpi-enviro-mqtt - now upstream: see examples/mqtt-all.py
• enviroplus_exporter - https://github.com/tijmenvandenbrink/enviroplus_exporter - Prometheus exporter (with added support for Luftdaten and InfluxDB Cloud)
• homekit-enviroplus - https://github.com/sighmon/homekit-enviroplus - An Apple HomeKit accessory for the Pimoroni Enviro+
• go-enviroplus - https://github.com/rubiojr/go-enviroplus - Go modules to read Enviro+ sensors
• homebridge-enviroplus - https://github.com/mhawkshaw/homebridge-enviroplus - a Homebridge plugin to add the Enviro+ to HomeKit via Homebridge
• Enviro Plus Web - https://gitlab.com/idotj/enviroplusweb - Simple Flask application serves a web page with the current sensor readings and a graph over a specified time period

Help & Support

• GPIO Pinout - https://pinout.xyz/pinout/enviro_plus
• Support forums - https://forums.pimoroni.com/c/support
• Discord - https://discord.gg/hr93ByC

1.0.1

• README.md: Fix images

1.0.0

• BREAKING: Port to gpiod/gpiodevice for Pi 5/Bookworm.

0.0.6

• Fix noise by specifying adau7002 device

0.0.5

• Drop Python 2.x support
• Add "available()" method for gas sensor

0.0.4

• Add support for ads1015 >= v0.0.7 (ADS1115 ADCs)
• Packaging tweaks

0.0.3

• Fix "self.noise_floor" bug in get_noise_profile

0.0.2

• Add support for extra ADC channel in Gas
• Handle breaking change in new ltr559 library
• Add Noise functionality

0.0.1

• Initial Release