Python gRPC Client for EventStoreDB

This Python package provides a Python gRPC client for the EventStoreDB database.

This client has been developed in collaboration with the EventStoreDB team. Although not all the features of EventStoreDB are supported by this client, many of the most useful features are presented in an easy-to-use interface.

This client has been tested to work with EventStoreDB LTS versions 21.10 and 22.10, without and without SSL/TLS, and with Python versions 3.7 to 3.11. There is 100% test coverage. The code has typing annotations, checked with mypy. The code is formatted with black and isort, and checked with flake8. Poetry is used for package management during development, and for building and publishing distributions to PyPI.

Synopsis

You can connect to an EventStoreDB database using the EventStoreDBClient class.

The EventStoreDBClient class can be imported from the esdbclient package.

Probably the three most useful methods of EventStoreDBClient are:

• append_to_stream() This method can be used to record new events in a particular "stream". This is useful, for example, when executing a command in an application that mutates an aggregate. This method is "atomic" in that either all or none of the events will be recorded.

• read_stream() This method can be used to retrieve all the recorded events in a "stream". This is useful, for example, when reconstructing an aggregate from recorded events before executing a command in an application that creates new events.

• subscribe_to_all() This method can be used to receive all recorded events in the database. This is useful, for example, in event-processing components because it supports processing events with "exactly-once" semantics.

The example below uses an "insecure" EventStoreDB server running locally on port 2113.

import uuid

from esdbclient import EventStoreDBClient, NewEvent, StreamState


# Construct EventStoreDBClient with an EventStoreDB URI. The
# connection string URI specifies that the client should
# connect to an "insecure" server running on port 2113.

client = EventStoreDBClient(
    uri="esdb://localhost:2113?Tls=false"
)


# Generate new events. Typically, domain events of different
# types are generated in a domain model, and then serialized
# into NewEvent objects. An aggregate ID may be used as the
# name of a stream in EventStoreDB.

stream_name1 = str(uuid.uuid4())
event1 = NewEvent(
    type='OrderCreated',
    data=b'{"order_number": "123456"}'
)
event2 = NewEvent(
    type='OrderSubmitted',
    data=b'{}'
)
event3 = NewEvent(
    type='OrderCancelled',
    data=b'{}'
)


# Append new events to a new stream. The value returned
# from the append_to_stream() method is the overall
# "commit position" in the database of the last new event
# recorded by this operation. The returned "commit position"
# may be used in a user interface to poll an eventually
# consistent event-processing component until it can
# present an up-to-date materialized view. New events are
# each allocated a "stream position", which is the next
# available position in the stream, starting from 0.

commit_position1 = client.append_to_stream(
    stream_name=stream_name1,
    current_version=StreamState.NO_STREAM,
    events=[event1, event2],
)

# Append events to an existing stream. The "current version"
# is the "stream position" of the last recorded event in a
# stream. We have recorded two new events, so the "current
# version" is 1. The exception 'WrongCurrentVersion' will be
# raised if an incorrect value is given.

commit_position2 = client.append_to_stream(
    stream_name=stream_name1,
    current_version=1,
    events=[event3],
)

# - allocated commit positions increase monotonically
assert commit_position2 > commit_position1


# Read events from a stream. This method returns a
# "read response" iterator, which returns recorded
# events. The iterator will stop when there are no
# more events to be returned.

read_response = client.read_stream(
    stream_name=stream_name1
)

# Iterate over "read response" to get recorded events.
# The recorded events may be deserialized to domain event
# objects of different types and used to reconstruct an
# aggregate in a domain model.
recorded_events = tuple(read_response)

# - stream 'stream_name1' now has three events
assert len(recorded_events) == 3

# - allocated stream positions are zero-based and gapless
assert recorded_events[0].stream_position == 0
assert recorded_events[1].stream_position == 1
assert recorded_events[2].stream_position == 2

# - event attribute values are recorded faithfully
assert recorded_events[0].type == "OrderCreated"
assert recorded_events[0].data == b'{"order_number": "123456"}'
assert recorded_events[0].id == event1.id

assert recorded_events[1].type == "OrderSubmitted"
assert recorded_events[1].data == b'{}'
assert recorded_events[1].id == event2.id

assert recorded_events[2].type == "OrderCancelled"
assert recorded_events[2].data == b'{}'
assert recorded_events[2].id == event3.id


# Start a catch-up subscription from last recorded position.
# This method returns a "catch-up subscription" iterator,
# which returns recorded events. The iterator will not stop
# when there are no more recorded events to be returned, but
# will block, and continue when further events are recorded.

catchup_subscription = client.subscribe_to_all()


# Iterate over the catch-up subscription. Process each recorded
# event in turn. Within an atomic database transaction, record
# the event's "commit position" along with any new state generated
# by processing the event. Use the component's last recorded commit
# position when restarting the catch-up subscription.

received_events = []
for event in catchup_subscription:
    received_events.append(event)

    if event.commit_position == commit_position2:
        # Break so we can continue with the example.
        break


# - events are received in the order they were recorded
assert received_events[-3].type == "OrderCreated"
assert received_events[-3].data == b'{"order_number": "123456"}'
assert received_events[-3].id == event1.id

assert received_events[-2].type == "OrderSubmitted"
assert received_events[-2].data == b'{}'
assert received_events[-2].id == event2.id

assert received_events[-1].type == "OrderCancelled"
assert received_events[-1].data == b'{}'
assert received_events[-1].id == event3.id


# Stop the catch-up subscription iterator.

catchup_subscription.stop()


# Close the client's gRPC connection.

client.close()

See below for more details.

For an example of usage, see the eventsourcing-eventstoredb package.

Table of contents

• Install package
  • From PyPI
  • With Poetry
• EventStoreDB server
  • Run container
  • Stop container
• EventStoreDB client
  • Import class
  • Construct client
• Connection strings
  • Two schemes
  • User info string
  • Query string
  • Examples
• Event objects
  • New events
  • Recorded events
• Streams
  • Append events
  • Idempotent append operations
  • Read stream events
  • Get current version
  • How to implement snapshotting with EventStoreDB
  • Read all events
  • Get commit position
  • Get stream metadata
  • Set stream metadata
  • Delete stream
  • Tombstone stream
• Catch-up subscriptions
  • Subscribe to all events
  • Subscribe to stream events
  • How to implement exactly-once event processing
• Persistent subscriptions
  • Create subscription to all
  • Read subscription to all
  • How to write a persistent subscription consumer
  • Update subscription to all
  • Create subscription to stream
  • Read subscription to stream
  • Update subscription to stream
  • Replay parked events
  • Get subscription info
  • List subscriptions
  • List subscriptions to stream
  • Delete subscription
• Call credentials
  • Construct call credentials
• Connection
  • Reconnect
  • Close
• Asyncio client
  • Synopsis
• Notes
  • Regular expression filters
  • Reconnect and retry method decorators
• Contributors
  • Install Poetry
  • Setup for PyCharm users
  • Setup from command line
  • Project Makefile commands

Install package

It is recommended to install Python packages into a Python virtual environment.

From PyPI

You can use pip to install this package directly from the Python Package Index.

$ pip install esdbclient

With Poetry

You can use Poetry to add this package to your pyproject.toml and install it.

$ poetry add esdbclient

EventStoreDB server

The EventStoreDB server can be run locally using the official Docker container image.

Run container

For development, you can run a "secure" EventStoreDB server using the following command.

$ docker run -d --name eventstoredb-secure -it -p 2113:2113 --env "HOME=/tmp" eventstore/eventstore:21.10.9-buster-slim --dev

As we will see, your client will need an EventStoreDB connection string URI as the value of its uri constructor argument. The connection string for this "secure" EventStoreDB server would be:

esdb://admin:changeit@localhost:2113

To connect to a "secure" server, you will usually need to include a "username" and a "password" in the connection string, so that the server can authenticate the client. With EventStoreDB, the default username is "admin" and the default password is "changeit".

When connecting to a "secure" server, your client will also need an SSL/TLS certificate as the value of its root_certificates constructor argument. The client uses the SSL/TLS certificate to authenticate the server. For development, you can either use the SSL/TLS certificate of the certificate authority used to create the server's certificate, or when using a single-node cluster, you can use the server certificate itself. You can get the server certificate with the following Python code.

import ssl

server_certificate = ssl.get_server_certificate(addr=('localhost', 2113))

Alternatively, you can start an "insecure" server using the following command.

$ docker run -d --name eventstoredb-insecure -it -p 2113:2113 eventstore/eventstore:21.10.9-buster-slim --insecure

The connection string URI for this "insecure" server would be:

esdb://localhost:2113?Tls=false

As we will see, when connecting to an "insecure" server, there is no need to include a "username" and a "password" in the connection string. If you do, these values will be ignored by the client, so that they are not sent over an insecure channel.

Please note, the "insecure" connection string uses a query string with the field-value Tls=false. The value of this field is by default true.

Stop container

To stop and remove the "secure" container, use the following Docker commands.

$ docker stop eventstoredb-secure
$ docker rm eventstoredb-secure

To stop and remove the "insecure" container, use the following Docker commands.

$ docker stop eventstoredb-insecure
$ docker rm eventstoredb-insecure

EventStoreDB client

This EventStoreDB client is implemented in the esdbclient package with the EventStoreDBClient class.

Import class

The EventStoreDBClient class can be imported from the esdbclient package.

from esdbclient import EventStoreDBClient

Construct client

The EventStoreDBClient class has one required constructor argument, uri, and one optional constructor argument, root_certificates.

The uri argument is expected to be an EventStoreDB connection string URI that conforms with the standard EventStoreDB "esdb" or "esdb+discover" URI schemes.

For example, the following connection string specifies that the client should attempt to create a "secure" connection to port 2113 on "localhost", and use the client credentials "username" and "password" when making calls to the server.

esdb://username:password@localhost:2113?Tls=true

The client must be configured to create a "secure" connection to a "secure" server, or alternatively an "insecure" connection to an "insecure" server. By default, the client will attempt to create a "secure" connection. And so, when connecting to an "insecure" server, the connection string must specify that the client should attempt to make an "insecure" connection.

The following connection string specifies that the client should attempt to create an "insecure" connection to port 2113 on "localhost". When connecting to an "insecure" server, the client will ignore any username and password information included in the connection string, so that usernames and passwords are not sent over an "insecure" connection.

esdb://localhost:2113?Tls=false

Please note, the "insecure" connection string uses a query string with the field-value Tls=false. The value of this field is by default true. Unless the connection string URI includes the field-value Tls=false in the query string, the root_certificates constructor argument is also required.

When connecting to a "secure" server, the root_certificates argument is expected to be a Python str containing PEM encoded SSL/TLS root certificates. This value is passed directly to grpc.ssl_channel_credentials(). It is used for authenticating the server to the client. It is commonly the certificate of the certificate authority that was responsible for generating the SSL/TLS certificate used by the EventStoreDB server. But, alternatively for development, you can use the server's certificate itself.

In the example below, the constructor argument values are taken from the operating system environment. This is a typical arrangement in a production environment. It is done this way here so that the code in this documentation can be tested with both a "secure" and an "insecure" server.

import os

client = EventStoreDBClient(
    uri=os.getenv("ESDB_URI"),
    root_certificates=os.getenv("ESDB_ROOT_CERTIFICATES"),
)

Connection strings

An EventStoreDB connection string is a URI that conforms with one of two possible schemes: either the "esdb" scheme, or the "esdb+discover" scheme.

The syntax and semantics of the EventStoreDB URI schemes are described below. The syntax is defined using EBNF.

Two schemes

The "esdb" URI scheme can be defined in the following way.

esdb-uri = "esdb://" , [ user-info , "@" ] , grpc-target, { "," , grpc-target } , [ "?" , query-string ] ;

In the "esdb" URI scheme, after the optional user info string, there must be at least one gRPC target. If there are several gRPC targets, they must be separated from each other with the "," character. Each gRPC target should indicate an EventStoreDB gRPC server socket, by specifying a host and a port number separated with the ":" character. The host may be a hostname that can be resolved to an IP address, or an IP address.

grpc-target = ( hostname | ip-address ) , ":" , port-number ;

The "esdb+discover" URI scheme can be defined in the following way.

esdb-discover-uri = "esdb+discover://" , [ user-info, "@" ] , cluster-domainname , [ "?" , query-string ] ;

In the "esdb+discover" URI scheme, after the optional user info string, there must be a domain name which should identify a cluster of EventStoreDB servers. The client will use a DNS server to resolve the domain name to a list of addresses of EventStoreDB servers, by querying for 'A' records. In this case, the port number "2113" will be used to construct gRPC targets from the addresses obtained from 'A' records provided by the DNS server. Therefore, if you want to use the "esdb+discover" URI scheme, you will need to configure DNS when setting up your EventStoreDB cluster.

With both the "esdb" and "esdb+discover" URI schemes, the client firstly obtains a list of gRPC targets: either directly from "esdb" connection strings; or indirectly from "esdb+discover" connection strings via DNS. This list of targets is known as the "gossip seed". The client will then attempt to connect to each gRPC target in turn, attempting to call the EventStoreDB Gossip API to obtain information about the EventStoreDB cluster. A member of the cluster is selected by the client, according to the "node preference" option. The client may then need to close its connection and reconnect to the selected server.

User info string

In both the "esdb" and "esdb+discover" schemes, the URI may include a user info string. If it exists in the URI, the user info string must be separated from the rest of the URI with the "@" character. The user info string must include a username and a password, separated with the ":" character.

user-info = username , ":" , password ;

The user info is sent by the client as "call credentials" in each call to a "secure" server, in a "basic auth" authorization header. This authorization header is used by the server to authenticate the client. The authorization header is not sent to "insecure" servers.

Query string

In both the "esdb" and "esdb+discover" schemes, the optional query string must be one or many field-value arguments, separated from each other with the "&" character.

query-string = field-value, { "&", field-value } ;

Each field-value argument must be one of the supported fields, and an appropriate value, separated with the "=" character.

field-value = ( "Tls", "=" , "true" | "false" )
            | ( "TlsVerifyCert", "=" , "true" | "false" )
            | ( "ConnectionName", "=" , string )
            | ( "NodePreference", "=" , "leader" | "follower" | "readonlyreplica" | "random" )
            | ( "DefaultDeadline", "=" , integer )
            | ( "GossipTimeout", "=" , integer )
            | ( "MaxDiscoverAttempts", "=" , integer )
            | ( "DiscoveryInterval", "=" , integer )
            | ( "MaxDiscoverAttempts", "=" , integer )
            | ( "KeepAliveInterval", "=" , integer )
            | ( "KeepAliveInterval", "=" , integer ) ;

The table below describes the query field-values supported by this client.

Examples

Here are some examples of EventStoreDB connection string URIs.

The following URI will cause the client to connect to, and get cluster info, from "secure" server socket localhost:2113. And then to connect to a "leader" node. And also to use "admin" and "changeit" as the username and password when making calls to EventStoreDB API methods.

esdb://admin:changeit@localhost:2113

The following URI will cause the client to get cluster info from "insecure" server socket 127.0.0.1:2113. And then to connect to a "leader" node.

esdb://127.0.0.1:2113?Tls=false

The following URI will cause the client to get cluster info from addresses in DNS 'A' records for cluster1.example.com. And then to connect to a "leader" node. And use a default deadline of 5 seconds when making calls to EventStore API "write" methods.

esdb+discover://admin:changeit@cluster1.example.com?DefaultDeadline=5

The following URI will cause the client to get cluster info from either localhost:2111, or localhost:2112, or localhost:2113. And then to connect to a "follower" node.

esdb://admin:changeit@localhost:2111,localhost:2112,localhost:2113?NodePreference=follower

The following URI will cause the client to get cluster info from addresses in DNS 'A' records for cluster1.example.com. And to configure "keep alive" timeout and interval in the gRPC channel.

esdb+discover://admin:changeit@cluster1.example.com?KeepAliveInterval=10000&KeepAliveTimeout=10000

Please note, the client is insensitive to the case of fields and values. If fields are repeated in the query string, the query string will be parsed without error. However, the connection options used by the client will use the value of the first field. All the other field-values in the query string with the same field name will be ignored. Fields without values will also be ignored.

If the client's node preference is "leader" and the node becomes a "follower", the client will attempt to reconnect to the current leader when a method is called that expects to call a leader. Methods which mutate the state of the database expect to call a leader. For such methods, the HTTP header "requires-leader" is set to "true", and this header is observed by the server, and so a node which is not a leader that receives such a request will return an error. This error is detected by the client, which will then close the current gRPC connection and create a new connection to the leader. The request will then be retried with the leader.

If the client's node preference is "follower" and there are no follower nodes in the cluster, then the client will raise an exception. Similarly, if the client's node preference is "readonlyreplica" and there are no read-only replica nodes in the cluster, then the client will also raise an exception.

The gRPC channel option "grpc.max_receive_message_length" is automatically configured to the value 17 * 1024 * 1024. This value cannot be changed.

Event objects

This package defines a NewEvent class and a RecordedEvent class. The NewEvent class should be used when writing events to the database. The RecordedEvent class is used when reading events from the database.

New events

The NewEvent class should be used when writing events to an EventStoreDB database. You will need to construct new event objects before calling append_to_stream().

The NewEvent class is a frozen Python dataclass. It has two required constructor arguments (type and data) and three optional constructor arguments (metadata, content_type and id).

The required type argument is a Python str, used to describe the type of domain event that is being recorded.

The required data argument is a Python bytes object, used to state the serialized data of the domain event that is being recorded.

The optional metadata argument is a Python bytes object, used to indicate any metadata of the event that will be recorded. The default value is an empty bytes object.

The optional content_type argument is a Python str, used to indicate the kind of data that is being recorded. The default value is 'application/json', which indicates that the data was serialised using JSON. An alternative value for this argument is the more general indication 'application/octet-stream'.

The optional id argument is a Python UUID object, used to specify the unique ID of the event that will be recorded. If no value is provided, a new version-4 UUID will be generated.

new_event1 = NewEvent(
    type='OrderCreated',
    data=b'{"name": "Greg"}',
)
assert new_event1.type == 'OrderCreated'
assert new_event1.data == b'{"name": "Greg"}'
assert new_event1.metadata == b''
assert new_event1.content_type == 'application/json'
assert isinstance(new_event1.id, uuid.UUID)

event_id = uuid.uuid4()
new_event2 = NewEvent(
    type='ImageCreated',
    data=b'01010101010101',
    metadata=b'{"a": 1}',
    content_type='application/octet-stream',
    id=event_id,
)
assert new_event2.type == 'ImageCreated'
assert new_event2.data == b'01010101010101'
assert new_event2.metadata == b'{"a": 1}'
assert new_event2.content_type == 'application/octet-stream'
assert new_event2.id == event_id

Recorded events

The RecordedEvent class is used when reading events from an EventStoreDB database. The client will return event objects of this type from all methods that return recorded events, such as get_stream(), subscribe_to_all(), and read_subscription_to_all(). You do not need to construct recorded event objects.

Like NewEvent, the RecordedEvent class is also a frozen Python dataclass. It has all the attributes that NewEvent has (type, data, metadata, content_type, id) and some additional attributes that follow from the fact that an event was recorded (stream_name, stream_position, commit_position).

The type attribute is a Python str, used to indicate the type of an event that was recorded.

The data attribute is a Python bytes object, used to indicate the data of an event that was recorded.

The metadata attribute is a Python bytes object, used to indicate the metadata of an event that was recorded.

The content_type attribute is a Python str, used to indicate the type of data that was recorded for an event. It is usually 'application/json', indicating that the data can be parsed as JSON. Alternatively, it is 'application/octet-stream'.

The id attribute is a Python UUID object, used to indicate the unique ID of an event that was recorded.

The stream_name attribute is a Python str, used to indicate the name of a stream in which an event was recorded.

The stream_position attribute is a Python int, used to indicate the position in a stream at which an event was recorded.

In EventStoreDB, a "stream position" is an integer representing the position of a recorded event in a stream. Each recorded event is recorded at a position in a stream. Each stream position is occupied by only one recorded event. New events are recorded at the next unoccupied position. All sequences of stream positions are zero-based and gapless.

The commit_position attribute is a Python int, used to indicate the position in the database at which an event was recorded.

In EventStoreDB, a "commit position" is an integer representing the position of a recorded event in the database. Each recorded event is recorded at a position in the database. Each commit position is occupied by only one recorded event. Commit positions are zero-based and increase monotonically as new events are recorded. But, unlike stream positions, the sequence of successive commit positions is not gapless. Indeed, there are usually large differences between the commit positions of successively recorded events.

Please note, in EventStoreDB 21.10, the commit_position of all RecordedEvent objects obtained from read_stream() is None, whereas those obtained from read_all() have the actual commit position of the recorded event. This was changed in version 22.10, so that event objects obtained from both get_stream() and read_all() have the actual commit position. The commit_position attribute of the RecordedEvent class is annotated with the type Optional[int] for this reason only.

from esdbclient.events import RecordedEvent

recorded_event = RecordedEvent(
    type='OrderCreated',
    data=b'{}',
    metadata=b'',
    content_type='application/json',
    id=uuid.uuid4(),
    stream_name='stream1',
    stream_position=0,
    commit_position=512,
)

Streams

In EventStoreDB, a "stream" is a sequence of recorded events that all have the same "stream name". There will normally be many streams in a database, each with many recorded events. Each recorded event has a position in its stream (the "stream position"), and a position in the database (the "commit position"). Stream positions are zero-based and gapless. Commit positions are also zero-based, but are not gapless.

The methods append_to_stream(), get_stream() and read_all() can be used to read and record in the database.

Append events

requires leader

The append_to_stream() method can be used atomically to record a sequence of new events. If the operation is successful, it returns the commit position of the last event in the sequence that has been recorded.

This method has three required arguments, stream_name, current_version and events.

The required stream_name argument is a Python str that uniquely identifies a stream to which a sequence of events will be appended.

The required current_version argument is expected to be either a Python int that indicates the stream position of the last recorded event in the stream, or StreamState.NO_STREAM if the stream does not yet exist or has been deleted. The stream positions are zero-based and gapless, so that if a stream has two events, the current_version should be 1. If an incorrect value is given, this method will raise a WrongCurrentVersion exception. This behavior is designed to provide concurrency control when recording new events. The correct value of current_version for any stream can be obtained by calling get_current_version(). However, the typical approach is to reconstruct an aggregate from the recorded events, so that the version of the aggregate is the stream position of the last recorded event, then have the aggregate generate new events, and then use the current version of the aggregate as the value of the current_version argument when appending the new aggregate events. This ensures the consistency of the recorded aggregate events, because operations that generate new aggregate events can be retried with a freshly reconstructed aggregate if a WrongCurrentVersion exception is encountered when recording new events. This controlling behavior can be disabled by setting the value of the current_version argument to the constant StreamState.ANY.

The required events argument is expected to be a sequence of new event objects. The NewEvent class should be used to construct new event objects. The append_to_stream() operation is atomic, so that either all or none of the new events will be recorded. It is not possible with EventStoreDB atomically to record new events in more than one stream.

This method also has an optional timeout argument, which is a Python float that sets a deadline for the completion of the gRPC operation.

This method also has an optional credentials argument, which can be used to override call credentials derived from the connection string URI.

In the example below, a new event, event1, is appended to a new stream. The stream does not yet exist, so current_version is StreamState.NO_STREAM.

# Construct a new event object.
event1 = NewEvent(type='OrderCreated', data=b'data1')

# Define a new stream name.
stream_name1 = str(uuid.uuid4())

# Append the new events to the new stream.
commit_position1 = client.append_to_stream(
    stream_name=stream_name1,
    current_version=StreamState.NO_STREAM,
    events=[event1],
)

In the example below, two subsequent events are appended to an existing stream. The stream has one recorded event, so current_version is 0.

event2 = NewEvent(type='OrderUpdated', data=b'data2')
event3 = NewEvent(type='OrderDeleted', data=b'data3')

commit_position2 = client.append_to_stream(
    stream_name=stream_name1,
    current_version=0,
    events=[event2, event3],
)

The returned values, commit_position1 and commit_position2, are the commit positions in the database of the last events in the recorded sequences. That is, commit_position1 is the commit position of event1 and commit_position2 is the commit position of event3.

Commit positions that are returned in this way can be used by a user interface to poll a downstream component until it has processed all the newly recorded events. For example, consider a user interface command that results in the recording of new events, and an eventually consistent materialized view in a downstream component that is updated from these events. If the new events have not yet been processed, the view might be stale, or out-of-date. Instead of displaying a stale view, the user interface can poll the downstream component until it has processed the newly recorded events, and then display an up-to-date view to the user.

Idempotent append operations

The append_to_stream() method is "idempotent", in that if called with new events whose id attribute values equal those of recorded events in the named stream immediately after the stream position specified by the value of the current_version argument, then it will return the commit position of the last new event, without making any changes to the database.

Sometimes it may happen, when calling append_to_stream(), that the new events are successfully recorded but somehow a connection issue occurs before the successful call can return successfully to the client. We cannot be sure if the events were recorded or not, and so we may wish to retry. If the events were in fact successfully recorded, it is convenient for the retried operation to return successfully without raising an exception. If those new events were in fact not recorded, and in the meantime no other new events were recorded in that stream, then it makes sense that the new events will be recorded when the append operation is retried. Of course, if a WrongCurrentVersion exception is raised when retrying the operation, then an application command which generated the new events in the context of already recorded events may need to be executed again. Alternatively, a suitable error might be displayed by the application, with an up-to-date view of the recorded data, giving a user of the application an opportunity to decide if they still wish to proceed with their original intention.

The example below shows the append_to_stream() method being called again with event3 and current_version=0. We can see that repeating the call to append_to_stream() returns successfully.

# Retry appending event3.
commit_position_retry = client.append_to_stream(
    stream_name=stream_name1,
    current_version=0,
    events=[event2, event3],
)

We can see that the same commit position is returned as above.

assert commit_position_retry == commit_position2

By calling get_stream(), we can also see the stream has been unchanged despite the append_to_stream() method having been called twice with the same arguments. That is, there are still only three events in the stream.

events = client.get_stream(
    stream_name=stream_name1
)

assert len(events) == 3

This idempotent behaviour depends on the id attribute of the NewEvent class. This attribute, by default, is assigned a new and unique version-4 UUID when an instance of NewEvent is constructed. The id argument can be used when constructing NewEvent objects to set the value of this attribute.

Read stream events

The read_stream() method can be used to get events that have been appended to a stream. This method returns a "read response" object.

A "read response" object is a Python iterator. Recorded events can be obtained by iterating over the "read response" object. Recorded events are streamed from the server to the client as the iteration proceeds. The iteration will automatically stop when there are no more recorded events to be returned. The streaming of events, and hence the iterator, can also be stopped by calling the stop() method on the "read response" object.

The get_stream() method can be used to get events that have been appended to a stream. This method returns a Python tuple of recorded event objects. The recorded event objects are instances of the RecordedEvent class. It calls read_stream() and passes the "read response" iterator into a Python tuple, so that the streaming will complete before the method returns.

The read_stream() and get_stream() methods have one required argument, stream_name.

The required stream_name argument is a Python str that uniquely identifies a stream from which recorded events will be returned.

The read_stream() and get_stream() methods also have five optional arguments, stream_position, backwards, resolve_links, limit, and timeout.

The optional stream_position argument is a Python int that can be used to indicate the position in the stream from which to start reading. The default value of stream_position is None. When reading a stream from a specific position in the stream, the recorded event at that position will be included, both when reading forwards from that position, and when reading backwards.

The optional backwards argument is a Python bool. The default value of backwards is False, which means the stream will be read forwards, so that events are returned in the order they were recorded. If backwards is True, the events are returned in reverse order.

If backwards is False and stream_position is None, the stream's events will be returned in the order they were recorded, starting from the first recorded event. If backwards is True and stream_position is None, the stream's events will be returned in reverse order, starting from the last recorded event.

The optional resolve_links argument is a Python bool. The default value of resolve_links is False, which means any event links will not be resolved, so that the events that are returned may represent event links. If resolve_links is True, any event links will be resolved, so that the linked events will be returned instead of the event links.

The optional limit argument is a Python int which restricts the number of events that will be returned. The default value of limit is sys.maxint.

The optional timeout argument is a Python float which sets a deadline for the completion of the gRPC operation.

This method also has an optional credentials argument, which can be used to override call credentials derived from the connection string URI.

The example below shows the default behavior, which is to return all the recorded events of a stream forwards from the first recorded events to the last.

events = client.get_stream(
    stream_name=stream_name1
)

assert len(events) == 3
assert events[0].id == event1.id
assert events[1].id == event2.id
assert events[2].id == event3.id

The example below shows how to use the stream_position argument to read a stream from a specific stream position to the end of the stream. Stream positions are zero-based, and so stream_position=1 corresponds to the second event that was recorded in the stream, in this case event2.

events = client.get_stream(
    stream_name=stream_name1,
    stream_position=1,
)

assert len(events) == 2
assert events[0].id == event2.id
assert events[1].id == event3.id

The example below shows how to use the backwards argument to read a stream backwards.

events = client.get_stream(
    stream_name=stream_name1,
    backwards=True,
)

assert len(events) == 3
assert events[0].id == event3.id
assert events[1].id == event2.id
assert events[2].id == event1.id

The example below shows how to use the limit argument to read a limited number of events.

events = client.get_stream(
    stream_name=stream_name1,
    limit=2,
)

assert len(events) == 2
assert events[0].id == event1.id
assert events[1].id == event2.id

The read_stream() and get_stream() methods will raise a NotFound exception if the named stream has never existed or has been deleted.

from esdbclient.exceptions import NotFound


try:
    client.get_stream('does-not-exist')
except NotFound:
    pass  # The stream does not exist.
else:
    raise Exception("Shouldn't get here")

Please note, the get_stream() method is decorated with the @autoreconnect and @retrygrpc decorators, whilst the read_stream() method is not. This means that all errors due to connection issues will be caught by the retry and reconnect decorators when calling the get_stream() method, but not when calling read_stream(). The read_stream() method has no such decorators because the streaming only starts when iterating over the "read response" starts, which means that the method returns before the streaming starts, and so there is no chance for any decorators to catch any connection issues.

For the same reason, read_stream() will not raise a NotFound exception when the stream does not exist, until iterating over the "read response" object begins.

If you are reading a very large stream, then you might prefer to call read_stream(), and begin iterating through the recorded events whilst they are being streamed from the server, rather than both waiting and having them all accumulate in memory.

Get current version

The get_current_version() method is a convenience method that essentially calls get_stream() with backwards=True and limit=1. This method returns the value of the stream_position attribute of the last recorded event in a stream. If a stream does not exist, the returned value is StreamState.NO_STREAM. The returned value is the correct value of current_version when appending events to a stream, and when deleting or tombstoning a stream.

This method has one required argument, stream_name.

The required stream_name argument is a Python str that uniquely identifies a stream from which a stream position will be returned.

This method also has an optional timeout argument, that is expected to be a Python float, which sets a deadline for the completion of the gRPC operation.

This method also has an optional credentials argument, which can be used to override call credentials derived from the connection string URI.

In the example below, the last stream position of stream_name1 is obtained. Since three events have been appended to stream_name1, and because positions in a stream are zero-based and gapless, so the current version is 2.

current_version = client.get_current_version(
    stream_name=stream_name1
)

assert current_version == 2

If a stream has never existed or has been deleted, the returned value is StreamState.NO_STREAM, which is the correct value of the current_version argument both when appending the first event of a new stream, and also when appending events to a stream that has been deleted.

current_version = client.get_current_version(
    stream_name='does-not-exist'
)

assert current_version is StreamState.NO_STREAM

How to implement snapshotting with EventStoreDB

Snapshots can improve the performance of aggregates that would otherwise be reconstructed from very long streams. However, it is generally recommended to design aggregates to have a finite lifecycle, and so to have relatively short streams, thereby avoiding the need for snapshotting. This "how to" section is intended merely to show how snapshotting of aggregates can be implemented with EventStoreDB using this Python client.

Event-sourced aggregates are typically reconstructed from recorded events by calling a mutator function for each recorded event, evolving from an initial state None to the current state of the aggregate. The function get_aggregate() shows how this can be done. The aggregate ID is used as a stream name. The exception AggregateNotFound is raised if the aggregate stream is not found.

class AggregateNotFound(Exception):
    """Raised when an aggregate is not found."""


def get_aggregate(aggregate_id, mutator_func):
    stream_name = aggregate_id

    # Get recorded events.
    try:
        events = client.get_stream(
            stream_name=stream_name,
            stream_position=None
        )
    except NotFound as e:
        raise AggregateNotFound(aggregate_id) from e
    else:
        # Reconstruct aggregate from recorded events.
        aggregate = None
        for event in events:
            aggregate = mutator_func(aggregate, event)
        return aggregate

Snapshotting of aggregates can be implemented by recording the current state of an aggregate as a new event.

If an aggregate object has a version number that corresponds to the stream position of the last event that was used to reconstruct the aggregate, and this version number is recorded in the snapshot metadata, then any events that are recorded after the snapshot can be selected using this version number. The aggregate can then be reconstructed from the last snapshot and any subsequent events, without having to replay the entire history.

We will use a separate stream for an aggregate's snapshots that is named after the stream used for recording its events. The name of the snapshot stream will be constructed by prefixing the aggregate's stream name with 'snapshot-$'.

SNAPSHOT_STREAM_NAME_PREFIX = 'snapshot-$'

def make_snapshot_stream_name(stream_name):
    return f'{SNAPSHOT_STREAM_NAME_PREFIX}{stream_name}'


def remove_snapshot_stream_prefix(snapshot_stream_name):
    assert snapshot_stream_name.startswith(SNAPSHOT_STREAM_NAME_PREFIX)
    return snapshot_stream_name[len(SNAPSHOT_STREAM_NAME_PREFIX):]

Now, let's redefine the get_aggregate() function, so that it looks for a snapshot event, then selects subsequent aggregate events, and then calls a mutator function for each recorded event.

Notice that the aggregate events are read from a stream for serialized aggregate events, whilst the snapshot is read from a separate stream for serialized aggregate snapshots. We will use JSON to serialize and deserialize event data.

import json


def get_aggregate(aggregate_id, mutator_func):
    stream_name = aggregate_id
    recorded_events = []

    # Look for a snapshot.
    try:
        snapshots = client.get_stream(
            stream_name=make_snapshot_stream_name(stream_name),
            backwards=True,
            limit=1
        )
    except NotFound:
        stream_position = None
    else:
        assert len(snapshots) == 1
        snapshot = snapshots[0]
        stream_position = deserialize(snapshot.metadata)['version'] + 1
        recorded_events.append(snapshot)

    # Get subsequent events.
    try:
        events = client.get_stream(
            stream_name=stream_name,
            stream_position=stream_position
        )
    except NotFound as e:
        raise AggregateNotFound(aggregate_id) from e
    else:
        recorded_events += events

    # Reconstruct aggregate from recorded events.
    aggregate = None
    for event in recorded_events:
        aggregate = mutator_func(aggregate, event)

    return aggregate


def serialize(d):
    return json.dumps(d).encode('utf8')


def deserialize(s):
    return json.loads(s.decode('utf8'))

To show how get_aggregate() can be used, let's define a Dog aggregate class, with attributes name and tricks. The attributes id and version will indicate an aggregate object's ID and version number. The attribute is_from_snapshot is added here merely to demonstrate below when an aggregate object has been reconstructed using a snapshot.

from dataclasses import dataclass


@dataclass(frozen=True)
class Aggregate:
    id: str
    version: int
    is_from_snapshot: bool


@dataclass(frozen=True)
class Dog(Aggregate):
    name: str
    tricks: list

Let's also define a mutator function mutate_dog() that evolves the state of a Dog aggregate given various different types of events, 'DogRegistered', 'DogLearnedTrick', and 'Snapshot'.

def mutate_dog(dog, event):
    data = deserialize(event.data)
    if event.type == 'DogRegistered':
        return Dog(
            id=event.stream_name,
            version=event.stream_position,
            is_from_snapshot=False,
            name=data['name'],
            tricks=[],
        )
    elif event.type == 'DogLearnedTrick':
        assert event.stream_position == dog.version + 1
        assert event.stream_name == dog.id, (event.stream_name, dog.id)
        return Dog(
            id=dog.id,
            version=event.stream_position,
            is_from_snapshot=dog.is_from_snapshot,
            name=dog.name,
            tricks=dog.tricks + [data['trick']],
        )
    elif event.type == 'Snapshot':
        return Dog(
            id=remove_snapshot_stream_prefix(event.stream_name),
            version=deserialize(event.metadata)['version'],
            is_from_snapshot=True,
            name=data['name'],
            tricks=data['tricks'],
        )
    else:
        raise Exception(f"Unknown event type: {event.type}")

For convenience, let's also define a get_dog() function that calls get_aggregate() with the mutate_dog() function as the value of its mutator_func argument.

def get_dog(dog_id):
    return get_aggregate(
        aggregate_id=dog_id,
        mutator_func=mutate_dog,
    )

We can also define some "command" functions that append new events to the database. The register_dog() function appends a DogRegistered event. The record_trick_learned() appends a DogLearnedTrick event. The function snapshot_dog() appends a Snapshot event. Notice that the record_trick_learned() and snapshot_dog() functions use get_dog().

Notice also that the DogRegistered and DogLearnedTrick events are appended to a stream for aggregate events, whilst the Snapshot event is appended to a separate stream for aggregate snapshots.

def register_dog(name):
    dog_id = str(uuid.uuid4())
    event = NewEvent(
        type='DogRegistered',
        data=serialize({'name': name}),
    )
    client.append_to_stream(
        stream_name=dog_id,
        current_version=StreamState.NO_STREAM,
        events=event,
    )
    return dog_id


def record_trick_learned(dog_id, trick):
    dog = get_dog(dog_id)
    event = NewEvent(
        type='DogLearnedTrick',
        data=serialize({'trick': trick}),
    )
    client.append_to_stream(
        stream_name=dog_id,
        current_version=dog.version,
        events=event,
    )


def snapshot_dog(dog_id):
    dog = get_dog(dog_id)
    event = NewEvent(
        type='Snapshot',
        data=serialize({'name': dog.name, 'tricks': dog.tricks}),
        metadata=serialize({'version': dog.version}),
    )
    client.append_to_stream(
        stream_name=make_snapshot_stream_name(dog_id),
        current_version=StreamState.ANY,
        events=event,
    )

We can call register_dog() to register a new dog.

# Register a new dog.
dog_id = register_dog('Fido')

dog = get_dog(dog_id)
assert dog.name == 'Fido'
assert dog.tricks == []
assert dog.version == 0
assert dog.is_from_snapshot is False

We can call record_trick_learned() to record that some tricks have been learned.

# Record that 'Fido' learned a new trick.
record_trick_learned(dog_id, trick='roll over')

dog = get_dog(dog_id)
assert dog.name == 'Fido'
assert dog.tricks == ['roll over']
assert dog.version == 1
assert dog.is_from_snapshot is False


# Record that 'Fido' learned another new trick.
record_trick_learned(dog_id, trick='fetch ball')

dog = get_dog(dog_id)
assert dog.name == 'Fido'
assert dog.tricks == ['roll over', 'fetch ball']
assert dog.version == 2
assert dog.is_from_snapshot is False

We can call snapshot_dog() to record a snapshot of the current state of the Dog aggregate. After we call snapshot_dog(), the get_dog() function will return a Dog object that has been constructed using the Snapshot event.

# Snapshot 'Fido'.
snapshot_dog(dog_id)

dog = get_dog(dog_id)
assert dog.name == 'Fido'
assert dog.tricks == ['roll over', 'fetch ball']
assert dog.version == 2
assert dog.is_from_snapshot is True

We can continue to evolve the state of the Dog aggregate, using the snapshot both during the call to record_trick_learned() and when calling get_dog() directly.

record_trick_learned(dog_id, trick='sit')

dog = get_dog(dog_id)
assert dog.name == 'Fido'
assert dog.tricks == ['roll over', 'fetch ball', 'sit']
assert dog.version == 3
assert dog.is_from_snapshot is True

We can see from the is_from_snapshot attribute that the Dog object was indeed reconstructed from the snapshot.

Snapshots can be created at fixed version number intervals, fixed time periods, after a particular type of event, immediately after events are appended, or as a background process.

Read all events

The read_all() method can be used to get all recorded events in the database in the order they were recorded. This method returns a "read response" object, just like read_stream().

A "read response" is an iterator, and not a sequence. Recorded events can be obtained by iterating over the "read response" object. Recorded events are streamed from the server to the client as the iteration proceeds. The iteration will automatically stop when there are no more recorded events to be returned. The streaming of events, and hence the iterator, can also be stopped by calling the stop() method on the "read response" object. The recorded event objects are instances of the RecordedEvent class.

This method has eight optional arguments, commit_position, backwards, filter_exclude, filter_include, filter_by_stream_name, limit, timeout, and credentials.

The optional commit_position argument is a Python int that can be used to specify a commit position from which to start reading. The default value of commit_position is None. Please note, if a commit position is specified, it must be an actually existing commit position in the database. When reading forwards, the event at the commit position may be included, depending upon the filter. When reading backwards, the event at the commit position will not be included.

The optional backwards argument is a Python bool. The default of backwards is False, which means events are returned in the order they were recorded, If backwards is True, then events are returned in reverse order.

If backwards is False and commit_position is None, the database's events will be returned in the order they were recorded, starting from the first recorded event. This is the default behavior of read_all(). If backwards is True and commit_position is None, the database's events will be returned in reverse order, starting from the last recorded event.

The optional filter_exclude argument is a sequence of regular expressions that specifies which recorded events should be returned. This argument is ignored if filter_include is set to a non-empty sequence. The default value of this argument matches the event types of EventStoreDB "system events", so that system events will not normally be included. See the Notes section below for more information about filter expressions.

The optional filter_include argument is a sequence of regular expressions that specifies which recorded events should be returned. By default, this argument is an empty tuple. If this argument is set to a non-empty sequence, the filter_exclude argument is ignored.

The optional filter_by_stream_name argument is a Python bool that indicates whether the filtering will apply to event types or stream names. By default, this value is False and so the filtering will apply to the event type strings of recorded events.

The optional limit argument is an integer which restricts the number of events that will be returned. The default value is sys.maxint.

The optional timeout argument is a Python float which sets a deadline for the completion of the gRPC operation.

The optional credentials argument can be used to override call credentials derived from the connection string URI.

The filtering of events is done on the EventStoreDB server. The limit argument is applied on the server after filtering.

The example below shows how to get all the events we have recorded in the database so far, in the order they were recorded. We can see the three events of stream_name1 (event1, event2 and event3) are included, along with others.

# Read all events (creates a streaming gRPC call).
read_response = client.read_all()

# Convert the iterator into a sequence of recorded events.
events = tuple(read_response)
assert len(events) > 3  # more than three

# Convert the sequence of recorded events into a set of event IDs.
event_ids = set(e.id for e in events)
assert event1.id in event_ids
assert event2.id in event_ids
assert event3.id in event_ids

The example below shows how to read all recorded events in the database from a particular commit position, in this case commit_position1. When reading forwards from a specific commit position, the event at the specified position will be included. The value of commit_position1 is the position we obtained when appending event1. And so event1 is the first recorded event we shall receive, event2 is the second, and event3 is the third.

# Read all events forwards from a commit position.
read_response = client.read_all(
    commit_position=commit_position1
)

# Step through the "read response" iterator.
assert next(read_response).id == event1.id
assert next(read_response).id == event2.id
assert next(read_response).id == event3.id

# Stop the iterator.
read_response.stop()

The example below shows how to read all events recorded in the database in reverse order. We can see that the first events we receive are the last events that were recorded: the events of the Dog aggregate from the section about snapshotting and the snapshot.

# Read all events backwards from the end.
read_response = client.read_all(
    backwards=True
)

# Step through the "read response" iterator.
assert next(read_response).type == "DogLearnedTrick"
assert next(read_response).type == "Snapshot"
assert next(read_response).type == "DogLearnedTrick"
assert next(read_response).type == "DogLearnedTrick"
assert next(read_response).type == "DogRegistered"

# Stop the iterator.
read_response.stop()

The example below shows how to read a limited number of events forwards from a specific commit position.

events = tuple(
    client.read_all(
        commit_position=commit_position1,
        limit=1,
    )
)

assert len(events) == 1
assert events[0].id == event1.id

The example below shows how to read a limited number of the recorded events in the database backwards from the end. In this case, the limit is 1, and so we receive the last recorded event.

events = tuple(
    client.read_all(
        backwards=True,
        limit=1,
    )
)

assert len(events) == 1

assert events[0].type == 'DogLearnedTrick'
assert deserialize(events[0].data)['trick'] == 'sit'

Please note, like the read_stream() method, the read_all() method is not decorated with retry and reconnect decorators, because the streaming of recorded events from the server only starts when iterating over the "read response" starts, which means that the method returns before the streaming starts, and so there is no chance for any decorators to catch any connection issues.

Get commit position

The get_commit_position() method can be used to get the commit position of the last recorded event in the database. It simply calls read_all() with backwards=True and limit=1, and returns the value of the commit_position attribute of the last recorded event.

commit_position = client.get_commit_position()

This method has five optional arguments, filter_exclude, filter_include, filter_by_stream_name, timeout and credentials. These values are passed to read_all().

The optional filter_exclude, filter_include and filter_by_stream_name arguments work in the same way as they do in the read_all() method.

The optional timeout argument is a Python float that sets a deadline for the completion of the gRPC operation.

The optional credentials argument can be used to override call credentials derived from the connection string URI.

This method might be used to measure progress of a downstream component that is processing all recorded events, by comparing the current commit position with the recorded commit position of the last successfully processed event in a downstream component. In this case, the value of the filter_exclude, filter_include and filter_by_stream_name arguments should equal those used by the downstream component to obtain recorded events.

Get stream metadata

The get_stream_metadata() method returns the metadata for a stream, along with the version of the stream metadata.

This method has one required argument, stream_name, which is a Python str that uniquely identifies a stream for which a stream metadata will be obtained.

This method has an optional timeout argument, which is a Python float that sets a deadline for the completion of the gRPC operation.

This method has an optional credentials argument, which can be used to override call credentials derived from the connection string URI.

In the example below, metadata for stream_name1 is obtained.

metadata, metadata_version = client.get_stream_metadata(stream_name=stream_name1)

The returned metadata value is a Python dict. The returned metadata_version value is either an int if the stream exists, or StreamState.NO_STREAM if the stream does not exist and no metadata has been set. These values can be used as the arguments of set_stream_metadata().

Set stream metadata

requires leader

The method set_stream_metadata() sets metadata for a stream. Stream metadata can be set before appending events to a stream.

This method has one required argument, stream_name, which is a Python str that uniquely identifies a stream for which a stream metadata will be set.

This method has an optional timeout argument, which is a Python float that sets a deadline for the completion of the gRPC operation.

This method has an optional credentials argument, which can be used to override call credentials derived from the connection string URI.

In the example below, metadata for stream_name1 is set.

metadata["foo"] = "bar"

client.set_stream_metadata(
    stream_name=stream_name1,
    metadata=metadata,
    current_version=metadata_version,
)

The current_version argument should be the current version of the stream metadata obtained from get_stream_metadata().

Please refer to the EventStoreDB documentation for more information about stream metadata.

Delete stream

requires leader

The method delete_stream() can be used to "delete" a stream.

This method has two required arguments, stream_name and current_version.

The required stream_name argument is a Python str that uniquely identifies a stream to which a sequence of events will be appended.

The required current_version argument is expected to be either a Python int that indicates the stream position of the last recorded event in the stream.

This method has an optional timeout argument, which is a Python float that sets a deadline for the completion of the gRPC operation.

This method has an optional credentials argument, which can be used to override call credentials derived from the connection string URI.

In the example below, stream_name1 is deleted.

commit_position = client.delete_stream(stream_name=stream_name1, current_version=2)

After deleting a stream, it's still possible to append new events. Reading from a deleted stream will return only events that have been appended after it was deleted.

Tombstone stream

requires leader

The method tombstone_stream() can be used to "tombstone" a stream.

This method has two required arguments, stream_name and current_version.

The required stream_name argument is a Python str that uniquely identifies a stream to which a sequence of events will be appended.

The required current_version argument is expected to be either a Python int that indicates the stream position of the last recorded event in the stream.

This method has an optional timeout argument, which is a Python float that sets a deadline for the completion of the gRPC operation.

This method has an optional credentials argument, which can be used to override call credentials derived from the connection string URI.

In the example below, stream_name1 is tombstoned.

commit_position = client.tombstone_stream(stream_name=stream_name1, current_version=2)

After tombstoning a stream, it's not possible to append new events.

Catch-up subscriptions

A "catch-up" subscription can be used to receive events that have already been recorded and events that are recorded subsequently. A catch-up subscription can be used by an event-processing component that processes recorded events with "exactly-once" semantics.

The subscribe_to_all() method starts a catch-up subscription that can receive all events in the database. The subscribe_to_stream() method starts a catch-up subscription that can receive events from a specific stream. Both methods return a "catch-up subscription" object, which is a Python iterator. Recorded events can be obtained by iteration. Recorded event objects obtained in this way are instances of the RecordedEvent class.

Before the "catch-up subscription" object is returned to the caller, the client will firstly obtain a "confirmation" response from the server, which allows the client to detect that both the gRPC connection and the streaming gRPC call is operational. For this reason, the subscribe_to_all() and subscribe_to_stream() methods are both usefully decorated with the reconnect and retry decorators. However, once the method has returned, the decorators will have exited, and any exceptions that are raised due to connection issues whilst iterating over the subscription object will have to be handled by your code.

A "catch-up subscription" iterator will not automatically stop when there are no more events to be returned, but instead the iteration will block until new events are subsequently recorded in the database. Any subsequently recorded events will then be immediately streamed to the client, and the iteration will then continue. The streaming of events, and hence the iteration, can be stopped by calling the stop() method on the "catch-up subscription" object.

Subscribe to all events

Thesubscribe_to_all() method can be used to start a catch-up subscription from which all events recorded in the database can be obtained in the order they were recorded. This method returns a "catch-up subscription" iterator.

This method also has six optional arguments, commit_position, filter_exclude, filter_include, filter_by_stream_name, timeout and credentials.

The optional commit_position argument specifies a commit position. The default value of commit_position is None, which means the catch-up subscription will start from the first recorded event in the database. If a commit position is given, it must match an actually existing commit position in the database. Only events recorded after that position will be obtained.

The optional filter_exclude argument is a sequence of regular expressions that specifies which recorded events should be returned. This argument is ignored if filter_include is set to a non-empty sequence. The default value of this argument matches the event types of EventStoreDB "system events", so that system events will not normally be included. See the Notes section below for more information about filter expressions.

The optional filter_include argument is a sequence of regular expressions that specifies which recorded events should be returned. By default, this argument is an empty tuple. If this argument is set to a non-empty sequence, the filter_exclude argument is ignored.

The optional filter_by_stream_name argument is a Python bool that indicates whether the filtering will apply to event types or stream names. By default, this value is False and so the filtering will apply to the event type strings of recorded events.

The optional timeout argument is a Python float which sets a deadline for the completion of the gRPC operation.

The optional credentials argument can be used to override call credentials derived from the connection string URI.

The example below shows how to start a catch-up subscription that starts from the first recorded event in the database.

# Subscribe from the first recorded event in the database.
catchup_subscription = client.subscribe_to_all()

The example below shows that catch-up subscriptions do not stop automatically, but block when the last recorded event is received, and then continue when subsequent events are recorded.

from time import sleep
from threading import Thread


# Append a new event to a new stream.
stream_name2 = str(uuid.uuid4())
event4 = NewEvent(type='OrderCreated', data=b'data4')

client.append_to_stream(
    stream_name=stream_name2,
    current_version=StreamState.NO_STREAM,
    events=[event4],
)


# Receive events from the catch-up subscription in a different thread.
received_events = []

def receive_events():
    for event in catchup_subscription:
        received_events.append(event)


def wait_for_event(event_id):
    for _ in range(100):
        for event in reversed(received_events):
            if event.id == event_id:
                return
        else:
            sleep(0.1)
    else:
        raise AssertionError("Event wasn't received")


thread = Thread(target=receive_events, daemon=True)
thread.start()

# Wait to receive event4.
wait_for_event(event4.id)

# Append another event whilst the subscription is running.
event5 = NewEvent(type='OrderUpdated', data=b'data5')
client.append_to_stream(
    stream_name=stream_name2,
    current_version=0,
    events=[event5],
)

# Wait for the subscription to block.
wait_for_event(event5.id)

# Stop the subscription.
catchup_subscription.stop()
thread.join()

The example below shows how to subscribe to events recorded after a particular commit position, in this case from the commit position of the last recorded event that was received above. Another event is recorded before the subscription is restarted. Further events are recorded whilst the subscription is running. The events we appended are received in the order they were recorded.

# Append another event.
event6 = NewEvent(type='OrderDeleted', data=b'data6')
client.append_to_stream(
    stream_name=stream_name2,
    current_version=1,
    events=[event6],
)

# Restart subscribing to all events after the
# commit position of the last received event.
catchup_subscription = client.subscribe_to_all(
    commit_position=received_events[-1].commit_position
)

thread = Thread(target=receive_events, daemon=True)
thread.start()

# Wait for event6.
wait_for_event(event6.id)

# Append three more events to a new stream.
stream_name3 = str(uuid.uuid4())
event7 = NewEvent(type='OrderCreated', data=b'data7')
event8 = NewEvent(type='OrderUpdated', data=b'data8')
event9 = NewEvent(type='OrderDeleted', data=b'data9')

client.append_to_stream(
    stream_name=stream_name3,
    current_version=StreamState.NO_STREAM,
    events=[event7, event8, event9],
)

# Wait for events.
wait_for_event(event7.id)
wait_for_event(event8.id)
wait_for_event(event9.id)

# Stop the subscription.
catchup_subscription.stop()
thread.join()

The catch-up subscription call is ended as soon as the subscription object's stop() method is called. This happens automatically when it goes out of scope, or when it is explicitly deleted from memory using the Python del keyword.

Subscribe to stream events

The subscribe_to_stream() method can be used to start a catch-up subscription from which events recorded in a single stream can be obtained. This method returns a "catch-up subscription" iterator.

This method has a required stream_name argument, which specifies the name of the stream from which recorded events will be received.

This method also has four optional arguments, stream_position, resolve_links, timeout and credentials.

The optional stream_position argument specifies a position in the stream. The default value of stream_position is None, which means that all events recorded in the stream will be obtained in the order they were recorded. If a stream position is given, then only events recorded after that position will be obtained.

The optional resolve_links argument is a Python bool. The default value of resolve_links is False, which means any event links will not be resolved, so that the events that are returned may represent event links. If resolve_links is True, any event links will be resolved, so that the linked events will be returned instead of the event links.

The optional timeout argument is a Python float that sets a deadline for the completion of the gRPC operation.

The optional credentials argument can be used to override call credentials derived from the connection string URI.

The example below shows how to start a catch-up subscription from the first recorded event in a stream.

# Subscribe from the start of 'stream2'.
subscription = client.subscribe_to_stream(stream_name=stream_name2)

The example below shows how to start a catch-up subscription from a particular stream position.

# Subscribe to stream2, from the second recorded event.
subscription = client.subscribe_to_stream(
    stream_name=stream_name2,
    stream_position=1,
)

How to implement exactly-once event processing

The commit positions of recorded events that are received and processed by a downstream component are usefully recorded by the downstream component, so that the commit position of last processed event can be determined when processing is resumed.

The last recorded commit position can be used to specify the commit position from which to subscribe when processing is resumed. Since this commit position will represent the position of the last successfully processed event in a downstream component, so it will be usual to want the next event after this position, because that is the next event that has not yet been processed. For this reason, when subscribing for events from a specific commit position using a catch-up subscription in EventStoreDB, the recorded event at the specified commit position will NOT be included in the sequence of recorded events that are received.

To accomplish "exactly-once" processing of recorded events in a downstream component when using a catch-up subscription, the commit position of a recorded event should be recorded atomically and uniquely along with the result of processing recorded events, for example in the same database as materialised views when implementing eventually-consistent CQRS, or in the same database as a downstream analytics or reporting or archiving application. By recording the commit position of recorded events atomically with the new state that results from processing recorded events, "dual writing" in the consumption of recorded events can be avoided. By also recording the commit position uniquely, the new state cannot be recorded twice, and hence the recorded state of the downstream component will be updated only once for any recorded event. By using the greatest recorded commit position to resume a catch-up subscription, all recorded events will eventually be processed. The combination of the "at-most-once" condition and the "at-least-once" condition gives the "exactly-once" condition.

The danger with "dual writing" in the consumption of recorded events is that if a recorded event is successfully processed and new state recorded atomically in one transaction with the commit position recorded in a separate transaction, one may happen and not the other. If the new state is recorded but the position is lost, and then the processing is stopped and resumed, the recorded event may be processed twice. On the other hand, if the commit position is recorded but the new state is lost, the recorded event may effectively not be processed at all. By either processing an event more than once, or by failing to process an event, the recorded state of the downstream component might be inaccurate, or possibly inconsistent, and perhaps catastrophically so. Such consequences may or may not matter in your situation. But sometimes inconsistencies may halt processing until the issue is resolved. You can avoid "dual writing" in the consumption of events by atomically recording the commit position of a recorded event along with the new state that results from processing that event in the same atomic transaction. By making the recording of the commit positions unique, so that transactions will be rolled back when there is a conflict, you will prevent the results of any duplicate processing of a recorded event being committed.

Recorded events received from a catch-up subscription cannot be acknowledged back to the EventStoreDB server. Acknowledging events, however, is an aspect of "persistent subscriptions". Hoping to rely on acknowledging events to an upstream component is an example of dual writing.

Persistent subscriptions

In EventStoreDB, "persistent" subscriptions are similar to catch-up subscriptions, in that reading a persistent subscription will block when there are no more recorded events to be received, and then continue when new events are subsequently recorded.

Persistent subscriptions can

Persistent subscriptions can be consumed by a group of consumers operating with one of the supported "consumer strategies".

The significant different with persistent subscriptions is the server will keep track of the progress of the consumers. The consumer of a persistent subscription will therefore need to "acknowledge" when a recorded event has been processed successfully, and otherwise "negatively acknowledge" a recorded event that has been received but was not successfully processed.

All of this means that for persistent subscriptions there are "create", "read", "update" "delete", "ack", and "nack" operations to consider.

Whilst there are some advantages of persistent subscriptions, in particular the concurrent processing of recorded events by a group of consumers, by tracking in the server the position in the commit sequence of events that have been processed, the issue of "dual writing" in the consumption of events arises. Reliability in the processing of recorded events by a group of persistent subscription consumers will rely on their idempotent handling of duplicate messages, and their resilience to out-of-order delivery.

Create subscription to all

requires leader

The create_subscription_to_all() method can be used to create a "persistent subscription" to all the recorded events in the database across all streams.

This method has a required group_name argument, which is the name of a "group" of consumers of the subscription.

This method also has eight optional arguments, from_end, commit_position, filter_exclude, filter_include, filter_by_stream_name, consumer_strategy, timeout and credentials.

The optional from_end argument can be used to specify that the group of consumers of the subscription should only receive events that were recorded after the subscription was created.

Alternatively, the optional commit_position argument can be used to specify a commit position from which commit position the group of consumers of the subscription should receive events. Please note, the recorded event at the specified commit position might be included in the recorded events received by the group of consumers.

If neither from_end or commit_position are specified, the group of consumers of the subscription will potentially receive all recorded events in the database.

The optional filter_exclude argument is a sequence of regular expressions that specifies which recorded events should be returned. This argument is ignored if filter_include is set to a non-empty sequence. The default value of this argument matches the event types of EventStoreDB "system events", so that system events will not normally be included. See the Notes section below for more information about filter expressions.

The optional filter_include argument is a sequence of regular expressions that specifies which recorded events should be returned. By default, this argument is an empty tuple. If this argument is set to a non-empty sequence, the filter_exclude argument is ignored.

The optional filter_by_stream_name argument is a Python bool that indicates whether the filtering will apply to event types or stream names. By default, this value is False and so the filtering will apply to the event type strings of recorded events.

The optional consumer_strategy argument is a Python str that defines the consumer strategy for this persistent subscription. The value of this argument can be 'DispatchToSingle', 'RoundRobin', 'Pinned', or 'PinnedByCorrelation'. The default value is 'DispatchToSingle'.

The optional timeout argument is a Python float which sets a deadline for the completion of the gRPC operation.

The optional credentials argument can be used to override call credentials derived from the connection string URI.

The method create_subscription_to_all() does not return a value. Recorded events are obtained by calling the read_subscription_to_all() method.

In the example below, a persistent subscription is created to operate from the first recorded non-system event in the database.

# Create a persistent subscription.
group_name1 = f"group-{uuid.uuid4()}"
client.create_subscription_to_all(group_name=group_name1)

Read subscription to all

requires leader

The read_subscription_to_all() method can be used by a group of consumers to receive recorded events from a persistent subscription that has been created using the create_subscription_to_all() method.

This method has a required group_name argument, which is the name of a "group" of consumers of the subscription specified when create_subscription_to_all() was called.

This method has an optional timeout argument, that is expected to be a Python float, which sets a deadline for the completion of the gRPC operation.

This method also has an optional credentials argument, which can be used to override call credentials derived from the connection string URI.

This method returns a PersistentSubscription object, which is an iterator giving RecordedEvent objects. It also has ack(), nack() and stop() methods.

subscription = client.read_subscription_to_all(group_name=group_name1)

The ack() method should be used by a consumer to indicate to the server that it has received and successfully processed a recorded event. This will prevent that recorded event being received by another consumer in the same group. The ack() method takes an event_id argument, which is the ID of the recorded event that has been received.

The example below iterates over the subscription object, and calls ack(). The stop() method is called when we have received the last event, so that we can continue with the examples below.

received_events = []

for event in subscription:
    received_events.append(event)

    # Acknowledge the received event.
    subscription.ack(event_id=event.id)

    # Stop when 'event9' has been received.
    if event.id == event9.id:
        subscription.stop()

The events are not guaranteed to be received in the order they were recorded. But we will have received event9.

assert event9.id in [e.id for e in received_events]

The PersistentSubscription object also has an nack() method that should be used by a consumer to negatively acknowledge to the server that it has received but not successfully processed a recorded event. The nack() method has an event_id argument, which is the ID of the recorded event that has been received. The nack() method also has an action argument, which should be a Python str: either 'unknown', 'park', 'retry', 'skip' or 'stop'.

How to write a persistent subscription consumer

The reading of a persistent subscription can be encapsulated in a "consumer" that calls a "policy" function when a recorded event is received and then automatically calls ack() if the policy function returns normally, and nack() if it raises an exception, perhaps retrying the event for a certain number of times before parking the event.

The simple example below shows how this might be done. We can see that 'event9' is acknowledged before 'event5' is finally parked.

acked_events = {}
nacked_events = {}


class ExampleConsumer:
    def __init__(self, subscription, max_retries, final_action):
        self.subscription = subscription
        self.max_retries = max_retries
        self.final_action = final_action
        self.error = None

    def run(self):
        try:
            for event in self.subscription:
                try:
                    self.policy(event)
                except Exception:
                    if event.retry_count < self.max_retries:
                        action = "retry"
                    else:
                        action = self.final_action
                    self.subscription.nack(event.id, action=action)
                    self.after_nack(event, action)
                else:
                    self.subscription.ack(event.id)
                    self.after_ack(event)
        except Exception:
            self.stop()
            raise

    def stop(self):
        self.subscription.stop()

    def policy(self, event):
        # Raise an exception when we see "event5".
        if event.id == event5.id:
            raise Exception()

    def after_ack(self, event):
        # Track retry count of acked events.
        acked_events[event.id] = event.retry_count

    def after_nack(self, event, action):
        # Track retry count of nacked events.
        nacked_events[event.id] = event.retry_count

        if action == self.final_action:
            # Stop the consumer, so we can continue with the examples.
            self.stop()


# Create subscription.
group_name = f"group-{uuid.uuid4()}"
client.create_subscription_to_all(group_name, commit_position=commit_position1)

# Read subscription.
subscription = client.read_subscription_to_all(group_name)

# Construct consumer.
consumer = ExampleConsumer(
    subscription=subscription,
    max_retries=5,
    final_action="park",
)

# Run consumer.
consumer.run()

# Check 'event5' was nacked and never acked.
assert event5.id in nacked_events
assert event5.id not in acked_events
assert nacked_events[event5.id] == 5

# Check 'event9' was acked and never nacked.
assert event9.id in acked_events
assert event9.id not in nacked_events

Update subscription to all

requires leader

The update_subscription_to_all() method can be used to update a "persistent subscription".

This method has a required group_name argument, which is the name of a "group" of consumers of the subscription.

This method also has three optional arguments, from_end, commit_position, timeout and credentials.

The optional from_end argument can be used to specify that the group of consumers of the subscription should only receive events that were recorded after the subscription was updated.

Alternatively, the optional commit_position argument can be used to specify a commit position from which commit position the group of consumers of the subscription should receive events. Please note, the recorded event at the specified commit position might be included in the recorded events received by the group of consumers.

If neither from_end or commit_position are specified, the group of consumers of the subscription will potentially receive all recorded events in the database.

Please note, the filter options and consumer strategy cannot be adjusted.

The optional timeout argument is a Python float which sets a deadline for the completion of the gRPC operation.

The optional credentials argument can be used to override call credentials derived from the connection string URI.

The method update_subscription_to_all() does not return a value.

In the example below, a persistent subscription is updated to run from the end of the database.

# Create a persistent subscription.
client.update_subscription_to_all(group_name=group_name1, from_end=True)

Create subscription to stream

requires leader

The create_subscription_to_stream() method can be used to create a persistent subscription to a stream.

This method has two required arguments, group_name and stream_name. The group_name argument names the group of consumers that will receive events from this subscription. The stream_name argument specifies which stream the subscription will follow. The values of both these arguments are expected to be Python str objects.

This method also has five optional arguments, stream_position, from_end, consumer_strategy, timeout and credentials.

The optional stream_position argument specifies a stream position from which to subscribe. The recorded event at this stream position will be received when reading the subscription.

The optional from_end argument is a Python bool. By default, the value of this argument is False. If this argument is set to True, reading from the subscription will receive only events recorded after the subscription was created. That is, it is not inclusive of the current stream position.

The optional consumer_strategy argument is a Python str that defines the consumer strategy for this persistent subscription. The value of this argument can be 'DispatchToSingle', 'RoundRobin', 'Pinned', or 'PinnedByCorrelation'. The default value is 'DispatchToSingle'.

The optional timeout argument is a Python float which sets a deadline for the completion of the gRPC operation.

The optional credentials argument can be used to override call credentials derived from the connection string URI.

This method does not return a value. Events can be received by calling read_subscription_to_stream().

The example below creates a persistent stream subscription from the start of the stream.

# Create a persistent stream subscription from start of the stream.
group_name2 = f"group-{uuid.uuid4()}"
client.create_subscription_to_stream(
    group_name=group_name2,
    stream_name=stream_name2,
)

Read subscription to stream

requires leader

The read_subscription_to_stream() method can be used to read a persistent subscription to a stream.

This method has two required arguments, group_name and stream_name, which should match the values of arguments used when calling create_subscription_to_stream().

This method has an optional timeout argument, that is expected to be a Python float, which sets a deadline for the completion of the gRPC operation.

This method also has an optional credentials argument, which can be used to override call credentials derived from the connection string URI.

This method returns a PersistentSubscription object, which is an iterator giving RecordedEvent objects, that also has ack(), nack() and stop() methods.

subscription = client.read_subscription_to_stream(
    group_name=group_name2,
    stream_name=stream_name2,
)

The example below iterates over the subscription object, and calls ack(). The for loop breaks when we have received the last event in the stream, so that we can finish the examples in this documentation.

events = []
for event in subscription:
    events.append(event)

    # Acknowledge the received event.
    subscription.ack(event_id=event.id)

    # Stop when 'event6' has been received.
    if event.id == event6.id:
        subscription.stop()

We can check we received all the events that were appended to stream_name2 in the examples above.

assert len(events) == 3
assert events[0].stream_name == stream_name2
assert events[0].id == event4.id
assert events[1].stream_name == stream_name2
assert events[1].id == event5.id
assert events[2].stream_name == stream_name2
assert events[2].id == event6.id

Update subscription to stream

requires leader

The update_subscription_to_stream() method can be used to update a persistent subscription to a stream.

This method has a required group_name argument, which is the name of a "group" of consumers of the subscription, and a required stream_name argument, which is the name of a stream.

This method also has four optional arguments, from_end, stream_position, timeout and credentials.

The optional from_end argument can be used to specify that the group of consumers of the subscription should only receive events that were recorded after the subscription was updated.

Alternatively, the optional stream_position argument can be used to specify a stream position from which commit position the group of consumers of the subscription should receive events. Please note, the recorded event at the specified stream position might be included in the recorded events received by the group of consumers.

If neither from_end or commit_position are specified, the group of consumers of the subscription will potentially receive all recorded events in the stream.

Please note, the consumer strategy cannot be adjusted.

The optional timeout argument is a Python float which sets a deadline for the completion of the gRPC operation.

The optional credentials argument can be used to override call credentials derived from the connection string URI.

The update_subscription_to_stream() method does not return a value.

In the example below, a persistent subscription to a stream is updated to run from the end of the stream.

# Create a persistent subscription.
client.update_subscription_to_stream(
    group_name=group_name2,
    stream_name=stream_name2,
    from_end=True,
)

Replay parked events

requires leader

The replay_parked_events() method can be used to "replay" events that have been "parked" (negatively acknowledged with the action 'park') when reading a persistent subscription. Parked events will then be received again by consumers reading from the persistent subscription.

This method has a required group_name argument and an optional stream_name argument. The values of these arguments should match those used when calling create_subscription_to_all() or create_subscription_to_stream().

This method has an optional timeout argument, that is expected to be a Python float, which sets a deadline for the completion of the gRPC operation.

This method also has an optional credentials argument, which can be used to override call credentials derived from the connection string URI.

The example below replays parked events for group group_name1.

client.replay_parked_events(
    group_name=group_name1,
)

The example below replays parked events for group group_name2.

client.replay_parked_events(
    group_name=group_name2,
    stream_name=stream_name2,
)

Get subscription info

requires leader

The get_subscription_info() method can be used to get information for a persistent subscription.

This method has a required group_name argument and an optional stream_name argument, which should match the values of arguments used when calling either create_subscription_to_all() or create_subscription_to_stream().

This method has an optional timeout argument, that is expected to be a Python float, which sets a deadline for the completion of the gRPC operation.

This method also has an optional credentials argument, which can be used to override call credentials derived from the connection string URI.

The example below gets information for the persistent subscription group_name1 which was created by calling create_subscription_to_all().

subscription_info = client.get_subscription_info(
    group_name=group_name1,
)

The example below gets information for the persistent subscription group_name2 on stream_name2 which was created by calling create_subscription_to_stream().

subscription_info = client.get_subscription_info(
    group_name=group_name2,
    stream_name=stream_name2,
)

The returned value is a SubscriptionInfo object.

List subscriptions

requires leader

The list_subscriptions() method can be used to get information for all existing persistent subscriptions, both "subscriptions to all" and "subscriptions to stream".

This method has an optional timeout argument, that is expected to be a Python float, which sets a deadline for the completion of the gRPC operation.

This method also has an optional credentials argument, which can be used to override call credentials derived from the connection string URI.

The example below lists all the existing persistent subscriptions.

subscriptions = client.list_subscriptions()

The returned value is a list of SubscriptionInfo objects.

List subscriptions to stream

requires leader

The list_subscriptions_to_stream() method can be used to get information for all the persistent subscriptions to a stream.

This method has one required argument, stream_name.

This method has an optional timeout argument, that is expected to be a Python float, which sets a deadline for the completion of the gRPC operation.

This method also has an optional credentials argument, which can be used to override call credentials derived from the connection string URI.

subscriptions = client.list_subscriptions_to_stream(
    stream_name=stream_name2,
)

The returned value is a list of SubscriptionInfo objects.

Delete subscription

requires leader

The delete_subscription() method can be used to delete a persistent subscription.

This method has a required group_name argument and an optional stream_name argument, which should match the values of arguments used when calling either create_subscription_to_all() or create_subscription_to_stream().

This method has an optional timeout argument, that is expected to be a Python float, which sets a deadline for the completion of the gRPC operation.

This method also has an optional credentials argument, which can be used to override call credentials derived from the connection string URI.

The example below deletes the persistent subscription group_name1 which was created by calling create_subscription_to_all().

client.delete_subscription(
    group_name=group_name1,
)

The example below deleted the persistent subscription group_name2 on stream_name2 which was created by calling create_subscription_to_stream().

client.delete_subscription(
    group_name=group_name2,
    stream_name=stream_name2,
)

Call credentials

Default call credentials are derived by the client from the user info part of the connection string URI.

Many of the client methods described above have an optional credentials argument, which can be used to set call credentials for an individual method call that override those derived from the connection string URI.

Construct call credentials

The client method construct_call_credentials() can be used to construct a call credentials object from a username and password.

call_credentials = client.construct_call_credentials(
    username='admin', password='changeit'
)

The call credentials object can be used as the value of the credentials argument in other client methods.

Connection

Reconnect

The reconnect() method can be used to manually reconnect the client to a suitable EventStoreDB node. This method uses the same routine for reading the cluster node states and then connecting to a suitable node according to the client's node preference that is specified in the connection string URI when the client is constructed. This method is thread-safe, in that when it is called by several threads at the same time, only one reconnection will occur. Concurrent attempts to reconnect will block until the client has reconnected successfully, and then they will all return normally.

client.reconnect()

An example of when it might be desirable to reconnect manually is when (for performance reasons) the client's node preference is to be connected to a follower node in the cluster, and, after a cluster leader election, the follower becomes the leader. Reconnecting to a follower node in this case is currently beyond the capabilities of this client, but this behavior might be implemented in a future release.

Reconnection will happen automatically in many cases, due to the @autoreconnect decorator.

Close

The close() method can be used to cleanly close the client's gRPC connection.

client.close()

Asyncio client

The esdbclient package also includes an early version of an asynchronous I/O gRPC Python client. It follows exactly the same behaviors as the multithreaded EventStoreDBClient, but uses the grpc.aio package and the asyncio module, instead of grpc and threading.

The async function AsyncioEventStoreDBClient constructs the client, and connects to a server. It can be imported from esdbclient, and can be called with the same arguments as EventStoreDBClient. It supports both the "esdb" and the "esdb+discover" connection string URI schemes, and can connect to both "secure" and "insecure" EventStoreDB servers. It reconnects or retries when connection issues or server errors are encountered.

from esdbclient import AsyncioEventStoreDBClient

The asynchronous I/O client has the following methods: append_to_stream(), get_stream(), read_all(), subscribe_to_all(), delete_stream(), tombstone_stream(), and reconnect().

These methods are equivalent to the methods on EventStoreDBClient. They have the same method signatures, and can be called with the same arguments, to the same effect. The methods which appear on EventStoreDBClient but not on AsyncioEventStoreDBClient will be added soon.

Synopsis

The example below demonstrates the append_to_stream(), get_stream() and subscribe_to_all() methods. These are the most useful methods for writing an event-sourced application, allowing new aggregate events to be recorded, the recorded events of an aggregate to be obtained so aggregates can be reconstructed, and the state of an application to propagated and processed with "exactly-once" semantics.

import asyncio

async def demonstrate_asyncio_client():

    # Construct client.
    client = await AsyncioEventStoreDBClient(
        uri=os.getenv("ESDB_URI"),
        root_certificates=os.getenv("ESDB_ROOT_CERTIFICATES"),
    )

    # Append events.
    stream_name = str(uuid.uuid4())
    event1 = NewEvent("OrderCreated", data=b'{}')
    event2 = NewEvent("OrderUpdated", data=b'{}')
    event3 = NewEvent("OrderDeleted", data=b'{}')

    commit_position = await client.append_to_stream(
        stream_name=stream_name,
        current_version=StreamState.NO_STREAM,
        events=[event1, event2, event3]
    )

    # Read stream events.
    recorded = await client.get_stream(stream_name)
    assert len(recorded) == 3
    assert recorded[0].id == event1.id
    assert recorded[1].id == event2.id
    assert recorded[2].id == event3.id


    # Subscribe all events.
    received = []
    async for event in await client.subscribe_to_all():
        received.append(event)
        if event.commit_position == commit_position:
            break
    assert received[-3].id == event1.id
    assert received[-2].id == event2.id
    assert received[-1].id == event3.id


    # Close the client.
    await client.close()


# Run the demo.
asyncio.get_event_loop().run_until_complete(
    demonstrate_asyncio_client()
)

Notes

Regular expression filters

The read_all(), subscribe_to_all(), create_subscription_to_all() and get_commit_position() methods have filter_exclude and filter_include arguments. This section provides some more details about the values of these arguments.

The first thing to note is that these arguments are sequences of regular expressions. They are concatenated together by the client as bracketed alternatives in a larger regular expression that is anchored to the start and end of the strings being matched. So you shouldn't include the '^' and '$' anchor characters, unless these characters are escaped as literal characters to be matched. But you should use wildcards if you want to match substrings, for example '.*Snapshot' to match all strings that end with 'Snapshot'.

In all methods, the default value of the filter_exclude argument is the constant DEFAULT_EXCLUDE_FILTER, which is designed to exclude EventStoreDB "system" and "persistence subscription config" event types, which otherwise would be included.

System events generated by EventStoreDB have type strings that start with the $ sign. Persistence subscription events generated when manipulating persistence subscriptions have type strings that start with PersistentConfig.

For example, to match the type of EventStoreDB system events, use the regular expression string r'\$.+'. Please note, the constant ESDB_SYSTEM_EVENTS_REGEX is set to this value. You can import this constant from esdbclient and use it when building longer sequences of regular expressions.

Similarly, to match the type of EventStoreDB persistence subscription events, use the regular expression r'PersistentConfig\d+'. The constant ESDB_PERSISTENT_CONFIG_EVENTS_REGEX is set to this value. You can import this constant from esdbclient and use it when building longer sequences of regular expressions.

The constant DEFAULT_EXCLUDE_FILTER is a sequence of regular expressions that includes both ESDB_SYSTEM_EVENTS_REGEX and ESDB_PERSISTENT_CONFIG_EVENTS_REGEX. It is used as the default value of filter_exclude so that the events that EventStoreDB generates internally are excluded by default.

For example, if you want to exclude snapshots and system events and persistent subscription events, then you may wish to use a appropriately extended copy of DEFAULT_EXCLUDE_FILTER as the value of the filter_exclude arguments, such as DEFAULT_EXCLUDE_FILTER + ['.*Snapshot'].

Reconnect and retry method decorators

Please note, nearly all the client methods are decorated with the @autoreconnect and the @retrygrpc decorators.

The @autoreconnect decorator will reconnect to a suitable node in the cluster when the server to which the client has been connected has become unavailable, or when the client's gRPC channel happens to have been closed. The client will also reconnect when a method is called that requires a leader, and the client's node preference is to be connected to a leader, but the node that the client has been connected to stops being the leader. In this case, the client will reconnect to the current leader. After reconnecting, the failed operation will be retried.

The @retrygrpc decorator retries operations that have failed due to a deadline being reached (so that the operation times out), and in case the server throws an exception when handling a client request.

Please also note, the aspects not covered by the reconnect and retry decorator behaviours have to do with methods that return iterators. For example, consider the "read response" iterator returned from the read_all() method. The read_all() method will have returned, and the method decorators will therefore have exited, before iterating over the "read response" begins. Therefore, if a connection issues occurs whilst iterating over the "read response", it isn't possible for any decorator on the read_all() method to trigger a reconnection.

With the "catch-up subscription" objects, there is an initial "confirmation" response from the server which is received and checked by the client. And so, when a call is made to subscribe_to_all() or subscribe_to_stream(), if the server is unavailable, or if the channel has somehow been closed, or if the request fails for some other reason, then the client will reconnect and retry. However, if an exception is raised when iterating over a successfully returned "catch-up subscription" object, the catch-up subscription will need to be restarted. Similarly, when reading persistent subscriptions, if there are connection issues whilst iterating over a successfully received response, the consumer will need to be restarted.

Contributors

Install Poetry

The first thing is to check you have Poetry installed.

$ poetry --version

If you don't, then please install Poetry.

$ curl -sSL https://install.python-poetry.org | python3 -

It will help to make sure Poetry's bin directory is in your PATH environment variable.

But in any case, make sure you know the path to the poetry executable. The Poetry installer tells you where it has been installed, and how to configure your shell.

Please refer to the Poetry docs for guidance on using Poetry.

Setup for PyCharm users

You can easily obtain the project files using PyCharm (menu "Git > Clone..."). PyCharm will then usually prompt you to open the project.

Open the project in a new window. PyCharm will then usually prompt you to create a new virtual environment.

Create a new Poetry virtual environment for the project. If PyCharm doesn't already know where your poetry executable is, then set the path to your poetry executable in the "New Poetry Environment" form input field labelled "Poetry executable". In the "New Poetry Environment" form, you will also have the opportunity to select which Python executable will be used by the virtual environment.

PyCharm will then create a new Poetry virtual environment for your project, using a particular version of Python, and also install into this virtual environment the project's package dependencies according to the project's poetry.lock file.

You can add different Poetry environments for different Python versions, and switch between them using the "Python Interpreter" settings of PyCharm. If you want to use a version of Python that isn't installed, either use your favourite package manager, or install Python by downloading an installer for recent versions of Python directly from the Python website.

Once project dependencies have been installed, you should be able to run tests from within PyCharm (right-click on the tests folder and select the 'Run' option).

Because of a conflict between pytest and PyCharm's debugger and the coverage tool, you may need to add --no-cov as an option to the test runner template. Alternatively, just use the Python Standard Library's unittest module.

You should also be able to open a terminal window in PyCharm, and run the project's Makefile commands from the command line (see below).

Setup from command line

Obtain the project files, using Git or suitable alternative.

In a terminal application, change your current working directory to the root folder of the project files. There should be a Makefile in this folder.

Use the Makefile to create a new Poetry virtual environment for the project and install the project's package dependencies into it, using the following command.

$ make install-packages

It's also possible to also install the project in 'editable mode'.

$ make install

Please note, if you create the virtual environment in this way, and then try to open the project in PyCharm and configure the project to use this virtual environment as an "Existing Poetry Environment", PyCharm sometimes has some issues (don't know why) which might be problematic. If you encounter such issues, you can resolve these issues by deleting the virtual environment and creating the Poetry virtual environment using PyCharm (see above).

Project Makefile commands

You can start EventStoreDB using the following command.

$ make start-eventstoredb

You can run tests using the following command (needs EventStoreDB to be running).

$ make test

You can stop EventStoreDB using the following command.

$ make stop-eventstoredb

You can check the formatting of the code using the following command.

$ make lint

You can reformat the code using the following command.

$ make fmt

Tests belong in ./tests. Code-under-test belongs in ./esdbclient.

Edit package dependencies in pyproject.toml. Update installed packages (and the poetry.lock file) using the following command.

$ make update-packages