A pluggable switch/router command-line simulator
Project description
[](https://travis-ci.org/internap/fake-switches)
[](http://badge.fury.io/py/fake-switches)
Fake-switches
=============
Fake-switches is a pluggable switch/router command-line simulator. It is meant
to help running integrated tests against network equipment without the burden
of having devices in a lab. This helps testing the communication with the
equipment along with all of its layers for more robust high level tests. Since
it is meant to be used by other systems and not humans, error handling on
incomplete commands and fail-proofing has been mostly left out and only
relevant errors are shown.
The library can easily be extended to react to some changes in the fake switch
configuration and control an actual set of tools to have an environment
behaving like a real one driven by a switch. For example, you could hook
yourself to the VLAN creation and use vconfig to create an actual vlan on a
machine for some network testing.
This library is NOT supported by any vendor, it was built by
reverse-engineering network equipment.
Actual supported commands
=========================
Command support has been added in a as-needed manner for the purpose of what
was tested and how. So see which commands may be used and their supported
behavior, please see the tests section for each model.
| Model | Protocols | Test location |
| ------- | ---------------- | ------------- |
| Cisco | ssh and telnet | [tests/cisco/test_cisco_switch_protocol.py](tests/cisco/test_cisco_switch_protocol.py) |
| Brocade | ssh | [tests/brocade/test_brocade_switch_protocol.py](tests/brocade/test_brocade_switch_protocol.py) |
| Juniper | netconf over ssh | [tests/juniper/juniper_base_protocol_test.py](tests/juniper/juniper_base_protocol_test.py) |
| Dell | ssh and telnet | [tests/dell/](tests/dell/) |
Using it with Docker
====================
```shell
$ docker run -P -d internap/fake-switches
$ docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
6eec86849561 internap/fake-switches "/bin/sh -c 'fake-swi" 35 seconds ago Up 13 seconds 0.0.0.0:32776->22/tcp boring_thompson
$ ssh 127.0.0.1 -p 32776 -l root
root@127.0.0.1's password: # root
my_switch>enable
Password: # press <RETURN>
my_switch#show run
Building configuration...
Current configuration : 164 bytes
version 12.1
!
hostname my_switch
!
!
vlan 1
!
interface FastEthernet0/1
!
interface FastEthernet0/2
!
interface FastEthernet0/3
!
interface FastEthernet0/4
!
end
my_switch#
```
Launching with custom parameters
--------------------------------
```shell
$ docker run -P -d -e SWITCH_MODEL="another_model" internap/fake-switches
```
Building image from source
--------------------------
```shell
$ docker build -t fake-switches .
$ docker run -P -d fake-switches
```
Making the switches more real
=============================
The SwitchConfiguration class can be extended and given an object factory with
custom classes that can act upon resources changes. For example :
```python
from twisted.internet import reactor
from fake_switches.switch_configuration import SwitchConfiguration, Port
from fake_switches.ssh_service import SwitchSshService
from fake_switches.cisco.cisco_core import CiscoSwitchCore
class MySwitchConfiguration(SwitchConfiguration):
def __init__(self, *args, **kwargs):
super(MySwitchConfiguration, self).__init__(objects_overrides={"Port": MyPort}, *args, **kwargs)
class MyPort(Port):
def __init__(self, name):
self._access_vlan = None
super(MyPort, self).__init__(name)
@property
def access_vlan(self):
return self._access_vlan
@access_vlan.setter
def access_vlan(self, value):
if self._access_vlan != value:
self._access_vlan = value
print "This could add vlan to eth0"
if __name__ == '__main__':
ssh_service = SwitchSshService(
ip="127.0.0.1",
ssh_port=11001,
switch_core=CiscoSwitchCore(MySwitchConfiguration("127.0.0.1", "my_switch", ports=[MyPort("FastEthernet0/1")])))
ssh_service.hook_to_reactor(reactor)
reactor.run()
```
Then, if you connect to the switch and do
```
ssh root@127.0.0.1 -p 11001
password : root
> enable
password:
# configure terminal
# vlan 1000
# interface FastEthernet0/1
# switchport access vlan 1000
```
Your program should say "This could add vlan to eth0" or do anything you would
want it to do :)
Starting a switch from the command line
=======================================
```shell
pip install fake-switches
# fake-switches <model> <listen_host> <listen_port>
fake-switches cisco_generic 0.0.0.0 22222
# On a different shell, type the following:
ssh root@127.0.0.1 -p 22222
```
You can replace cisco_generic by any other supported switch model.
Available switch models
-----------------------
The following models are available:
* brocade_generic
* cisco_generic
* cisco_2960_24TT_L
* cisco_2960_48TT_L
* dell_generic
* dell10g_generic
* juniper_generic
* juniper_qfx_copper_generic
The generic models are mainly for test purposes. They usually have less ports than a proper switch
model but behave the same otherwise. Once a "core" is available, more specific models can be very
easily added. Send your pull requests :)
Contributing
============
Feel free raise issues and send some pull request,
we'll be happy to look at them!
[](http://badge.fury.io/py/fake-switches)
Fake-switches
=============
Fake-switches is a pluggable switch/router command-line simulator. It is meant
to help running integrated tests against network equipment without the burden
of having devices in a lab. This helps testing the communication with the
equipment along with all of its layers for more robust high level tests. Since
it is meant to be used by other systems and not humans, error handling on
incomplete commands and fail-proofing has been mostly left out and only
relevant errors are shown.
The library can easily be extended to react to some changes in the fake switch
configuration and control an actual set of tools to have an environment
behaving like a real one driven by a switch. For example, you could hook
yourself to the VLAN creation and use vconfig to create an actual vlan on a
machine for some network testing.
This library is NOT supported by any vendor, it was built by
reverse-engineering network equipment.
Actual supported commands
=========================
Command support has been added in a as-needed manner for the purpose of what
was tested and how. So see which commands may be used and their supported
behavior, please see the tests section for each model.
| Model | Protocols | Test location |
| ------- | ---------------- | ------------- |
| Cisco | ssh and telnet | [tests/cisco/test_cisco_switch_protocol.py](tests/cisco/test_cisco_switch_protocol.py) |
| Brocade | ssh | [tests/brocade/test_brocade_switch_protocol.py](tests/brocade/test_brocade_switch_protocol.py) |
| Juniper | netconf over ssh | [tests/juniper/juniper_base_protocol_test.py](tests/juniper/juniper_base_protocol_test.py) |
| Dell | ssh and telnet | [tests/dell/](tests/dell/) |
Using it with Docker
====================
```shell
$ docker run -P -d internap/fake-switches
$ docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
6eec86849561 internap/fake-switches "/bin/sh -c 'fake-swi" 35 seconds ago Up 13 seconds 0.0.0.0:32776->22/tcp boring_thompson
$ ssh 127.0.0.1 -p 32776 -l root
root@127.0.0.1's password: # root
my_switch>enable
Password: # press <RETURN>
my_switch#show run
Building configuration...
Current configuration : 164 bytes
version 12.1
!
hostname my_switch
!
!
vlan 1
!
interface FastEthernet0/1
!
interface FastEthernet0/2
!
interface FastEthernet0/3
!
interface FastEthernet0/4
!
end
my_switch#
```
Launching with custom parameters
--------------------------------
```shell
$ docker run -P -d -e SWITCH_MODEL="another_model" internap/fake-switches
```
Building image from source
--------------------------
```shell
$ docker build -t fake-switches .
$ docker run -P -d fake-switches
```
Making the switches more real
=============================
The SwitchConfiguration class can be extended and given an object factory with
custom classes that can act upon resources changes. For example :
```python
from twisted.internet import reactor
from fake_switches.switch_configuration import SwitchConfiguration, Port
from fake_switches.ssh_service import SwitchSshService
from fake_switches.cisco.cisco_core import CiscoSwitchCore
class MySwitchConfiguration(SwitchConfiguration):
def __init__(self, *args, **kwargs):
super(MySwitchConfiguration, self).__init__(objects_overrides={"Port": MyPort}, *args, **kwargs)
class MyPort(Port):
def __init__(self, name):
self._access_vlan = None
super(MyPort, self).__init__(name)
@property
def access_vlan(self):
return self._access_vlan
@access_vlan.setter
def access_vlan(self, value):
if self._access_vlan != value:
self._access_vlan = value
print "This could add vlan to eth0"
if __name__ == '__main__':
ssh_service = SwitchSshService(
ip="127.0.0.1",
ssh_port=11001,
switch_core=CiscoSwitchCore(MySwitchConfiguration("127.0.0.1", "my_switch", ports=[MyPort("FastEthernet0/1")])))
ssh_service.hook_to_reactor(reactor)
reactor.run()
```
Then, if you connect to the switch and do
```
ssh root@127.0.0.1 -p 11001
password : root
> enable
password:
# configure terminal
# vlan 1000
# interface FastEthernet0/1
# switchport access vlan 1000
```
Your program should say "This could add vlan to eth0" or do anything you would
want it to do :)
Starting a switch from the command line
=======================================
```shell
pip install fake-switches
# fake-switches <model> <listen_host> <listen_port>
fake-switches cisco_generic 0.0.0.0 22222
# On a different shell, type the following:
ssh root@127.0.0.1 -p 22222
```
You can replace cisco_generic by any other supported switch model.
Available switch models
-----------------------
The following models are available:
* brocade_generic
* cisco_generic
* cisco_2960_24TT_L
* cisco_2960_48TT_L
* dell_generic
* dell10g_generic
* juniper_generic
* juniper_qfx_copper_generic
The generic models are mainly for test purposes. They usually have less ports than a proper switch
model but behave the same otherwise. Once a "core" is available, more specific models can be very
easily added. Send your pull requests :)
Contributing
============
Feel free raise issues and send some pull request,
we'll be happy to look at them!
Release history Release notifications | RSS feed
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
Source Distribution
fake-switches-1.1.8.tar.gz
(100.4 kB
view details)
File details
Details for the file fake-switches-1.1.8.tar.gz.
File metadata
- Download URL: fake-switches-1.1.8.tar.gz
- Upload date:
- Size: 100.4 kB
- Tags: Source
- Uploaded using Trusted Publishing? No
File hashes
| Algorithm | Hash digest | |
|---|---|---|
| SHA256 | 48044a8b0bd655a336398a8427eb2604a0cad84d7d0e54c0a10084b2e76e7325 |
|
| MD5 | da9efadba3397b808dc2518560ee0cd8 |
|
| BLAKE2b-256 | e10fcbc2ceccdcb010d744cf464fe5320aadbf5d1cbac5822dcc2300dca3e071 |
