A Python package for testing hardware (part of the magma ecosystem)
Project description
# Fault
[](https://travis-ci.com/leonardt/fault)
[](https://coveralls.io/github/leonardt/fault?branch=master)
A Python package for testing hardware (part of the magma ecosystem).
[API Documentation](http://truong.io/fault/)
[CHANGELOG](./CHANGELOG.md)
## Documentation
* [Actions](https://github.com/leonardt/fault/blob/master/doc/actions.md)
* [Tester](https://github.com/leonardt/fault/blob/master/doc/tester.md)
## Example
Here is a simple ALU defined in magma.
```python
import magma as m
import mantle
class ConfigReg(m.Circuit):
IO = ["D", m.In(m.Bits(2)), "Q", m.Out(m.Bits(2))] + \
m.ClockInterface(has_ce=True)
@classmethod
def definition(io):
reg = mantle.Register(2, has_ce=True, name="conf_reg")
io.Q <= reg(io.D, CE=io.CE)
class SimpleALU(m.Circuit):
IO = ["a", m.In(m.UInt(16)),
"b", m.In(m.UInt(16)),
"c", m.Out(m.UInt(16)),
"config_data", m.In(m.Bits(2)),
"config_en", m.In(m.Enable),
] + m.ClockInterface()
@classmethod
def definition(io):
opcode = ConfigReg(name="config_reg")(io.config_data, CE=io.config_en)
io.c <= mantle.mux(
[io.a + io.b, io.a - io.b, io.a * io.b, io.a / io.b], opcode)
```
Here's an example test in fault that uses the configuration interface, expects
a value on the internal register, and checks the result of performing the
expected operation.
```python
import operator
import fault
ops = [operator.add, operator.sub, operator.mul, operator.floordiv]
tester = fault.Tester(SimpleALU, SimpleALU.CLK)
tester.circuit.CLK = 0
tester.circuit.config_en = 1
for i in range(0, 4):
tester.circuit.config_data = i
tester.step(2)
tester.circuit.a = 3
tester.circuit.b = 2
tester.eval()
tester.circuit.c.expect(ops[i](3, 2))
```
We can run this with three different simulators
```python
tester.compile_and_run("verilator", flags=["-Wno-fatal"], directory="build")
tester.compile_and_run("system-verilog", simulator="ncsim", directory="build")
tester.compile_and_run("system-verilog", simulator="vcs", directory="build")
```
### Working with internal signals
Fault supports peeking, expecting, and printing internal signals. For the
`verilator` target, you should use the keyword argument `magma_opts` with
`"verilator_debug"` set to true. This will cause coreir to compile the verilog
with the required debug comments. Example:
```python
tester.compile_and_run("verilator", flags=["-Wno-fatal"],
magma_opts={"verilator_debug": True}, directory="build")
```
If you're using `mantle.Register` from the `coreir` implementation, you can
also poke the internal register value directly using the `value` field. Notice
that `conf_reg` is defined in `ConfigReg` to be an instance of
`mantle.Register` and the test bench pokes it by setting `confg_reg.value`
equal to `1`.
```python
tester = fault.Tester(SimpleALU, SimpleALU.CLK)
tester.circuit.CLK = 0
# Initialize
tester.step(2)
for i in reversed(range(4)):
tester.circuit.config_reg.conf_reg.value = i
tester.step(2)
tester.circuit.config_reg.conf_reg.O.expect(i)
```
## FAQ
### How do I generate waveforms with fault?
Fault supports generating `.vcd` dumps when using the `verilator` and
`system-verilog/ncsim` target.
For the `verilator` target, use the `flags` keyword argument to pass the
`--trace` flag. For example,
tester.compile_and_run("verilator", flags=["-Wno-fatal", "--trace"])
The `--trace` flag must be passed through to verilator so it generates code
that supports waveform dumping. The test harness generated by fault will
include the required logic for invoking `tracer->dump(main_time)` for every
call to `eval` and `step`. `main_time` is incremented for every call to step.
The output `.vcd` file will be saved in the file `logs/{circuit_name}` where
`circuit_name` is the name of the ciruit passed to `Tester`. The `logs`
directory will be placed in the same directory as the generated harness, which
is controlled by the `directory` keyword argument (by default this is
`"build/"`).
For the `system-verilog/ncsim` target, tracing is enabled by default. For
`ncsim`, the trace will be placed in a file called `verilog.vcd` in the same
directory as the generated harness.
[](https://travis-ci.com/leonardt/fault)
[](https://coveralls.io/github/leonardt/fault?branch=master)
A Python package for testing hardware (part of the magma ecosystem).
[API Documentation](http://truong.io/fault/)
[CHANGELOG](./CHANGELOG.md)
## Documentation
* [Actions](https://github.com/leonardt/fault/blob/master/doc/actions.md)
* [Tester](https://github.com/leonardt/fault/blob/master/doc/tester.md)
## Example
Here is a simple ALU defined in magma.
```python
import magma as m
import mantle
class ConfigReg(m.Circuit):
IO = ["D", m.In(m.Bits(2)), "Q", m.Out(m.Bits(2))] + \
m.ClockInterface(has_ce=True)
@classmethod
def definition(io):
reg = mantle.Register(2, has_ce=True, name="conf_reg")
io.Q <= reg(io.D, CE=io.CE)
class SimpleALU(m.Circuit):
IO = ["a", m.In(m.UInt(16)),
"b", m.In(m.UInt(16)),
"c", m.Out(m.UInt(16)),
"config_data", m.In(m.Bits(2)),
"config_en", m.In(m.Enable),
] + m.ClockInterface()
@classmethod
def definition(io):
opcode = ConfigReg(name="config_reg")(io.config_data, CE=io.config_en)
io.c <= mantle.mux(
[io.a + io.b, io.a - io.b, io.a * io.b, io.a / io.b], opcode)
```
Here's an example test in fault that uses the configuration interface, expects
a value on the internal register, and checks the result of performing the
expected operation.
```python
import operator
import fault
ops = [operator.add, operator.sub, operator.mul, operator.floordiv]
tester = fault.Tester(SimpleALU, SimpleALU.CLK)
tester.circuit.CLK = 0
tester.circuit.config_en = 1
for i in range(0, 4):
tester.circuit.config_data = i
tester.step(2)
tester.circuit.a = 3
tester.circuit.b = 2
tester.eval()
tester.circuit.c.expect(ops[i](3, 2))
```
We can run this with three different simulators
```python
tester.compile_and_run("verilator", flags=["-Wno-fatal"], directory="build")
tester.compile_and_run("system-verilog", simulator="ncsim", directory="build")
tester.compile_and_run("system-verilog", simulator="vcs", directory="build")
```
### Working with internal signals
Fault supports peeking, expecting, and printing internal signals. For the
`verilator` target, you should use the keyword argument `magma_opts` with
`"verilator_debug"` set to true. This will cause coreir to compile the verilog
with the required debug comments. Example:
```python
tester.compile_and_run("verilator", flags=["-Wno-fatal"],
magma_opts={"verilator_debug": True}, directory="build")
```
If you're using `mantle.Register` from the `coreir` implementation, you can
also poke the internal register value directly using the `value` field. Notice
that `conf_reg` is defined in `ConfigReg` to be an instance of
`mantle.Register` and the test bench pokes it by setting `confg_reg.value`
equal to `1`.
```python
tester = fault.Tester(SimpleALU, SimpleALU.CLK)
tester.circuit.CLK = 0
# Initialize
tester.step(2)
for i in reversed(range(4)):
tester.circuit.config_reg.conf_reg.value = i
tester.step(2)
tester.circuit.config_reg.conf_reg.O.expect(i)
```
## FAQ
### How do I generate waveforms with fault?
Fault supports generating `.vcd` dumps when using the `verilator` and
`system-verilog/ncsim` target.
For the `verilator` target, use the `flags` keyword argument to pass the
`--trace` flag. For example,
tester.compile_and_run("verilator", flags=["-Wno-fatal", "--trace"])
The `--trace` flag must be passed through to verilator so it generates code
that supports waveform dumping. The test harness generated by fault will
include the required logic for invoking `tracer->dump(main_time)` for every
call to `eval` and `step`. `main_time` is incremented for every call to step.
The output `.vcd` file will be saved in the file `logs/{circuit_name}` where
`circuit_name` is the name of the ciruit passed to `Tester`. The `logs`
directory will be placed in the same directory as the generated harness, which
is controlled by the `directory` keyword argument (by default this is
`"build/"`).
For the `system-verilog/ncsim` target, tracing is enabled by default. For
`ncsim`, the trace will be placed in a file called `verilog.vcd` in the same
directory as the generated harness.
Release history Release notifications | RSS feed
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
Source Distribution
fault-2.0.2.tar.gz
(25.2 kB
view details)
Built Distribution
fault-2.0.2-py3-none-any.whl
(34.2 kB
view details)
File details
Details for the file fault-2.0.2.tar.gz.
File metadata
- Download URL: fault-2.0.2.tar.gz
- Upload date:
- Size: 25.2 kB
- Tags: Source
- Uploaded using Trusted Publishing? No
- Uploaded via: Python-urllib/3.7
File hashes
| Algorithm | Hash digest | |
|---|---|---|
| SHA256 | fbbb9d5f88219c50cfdd5951fad6f27068f31b829f284d15ecd1f54950de47e4 |
|
| MD5 | 2bde21223880a723d6fcefc00691a3dc |
|
| BLAKE2b-256 | 90a3bfd4bf00680a3266a6dcad016720da9010b4b279931f9130988e6fbcb23b |
File details
Details for the file fault-2.0.2-py3-none-any.whl.
File metadata
- Download URL: fault-2.0.2-py3-none-any.whl
- Upload date:
- Size: 34.2 kB
- Tags: Python 3
- Uploaded using Trusted Publishing? No
- Uploaded via: Python-urllib/3.7
File hashes
| Algorithm | Hash digest | |
|---|---|---|
| SHA256 | f88e66c2202c5705e9b06a2c609fa619f9cbc3e7d045a07f4a0a95140058bfb9 |
|
| MD5 | af5523e82fec142e1be82af6770295e2 |
|
| BLAKE2b-256 | cf8c277a13cd8156d0635ed1632b492f68c597f0e3d3103793b1330864141861 |
