fonttools 4.6.0

The TTX file format

The following tables are currently supported:

BASE, CBDT, CBLC, CFF, CFF2, COLR, CPAL, DSIG, EBDT, EBLC, FFTM,
Feat, GDEF, GMAP, GPKG, GPOS, GSUB, Glat, Gloc, HVAR, JSTF, LTSH,
MATH, META, MVAR, OS/2, SING, STAT, SVG, Silf, Sill, TSI0, TSI1,
TSI2, TSI3, TSI5, TSIB, TSID, TSIJ, TSIP, TSIS, TSIV, TTFA, VDMX,
VORG, VVAR, ankr, avar, bsln, cidg, cmap, cvar, cvt, feat, fpgm,
fvar, gasp, gcid, glyf, gvar, hdmx, head, hhea, hmtx, kern, lcar,
loca, ltag, maxp, meta, mort, morx, name, opbd, post, prep, prop,
sbix, trak, vhea and vmtx

Other tables are dumped as hexadecimal data.

TrueType fonts use glyph indices (GlyphIDs) to refer to glyphs in most places. While this is fine in binary form, it is really hard to work with for humans. Therefore we use names instead.

The glyph names are either extracted from the CFF table or the post table, or are derived from a Unicode cmap table. In the latter case the Adobe Glyph List is used to calculate names based on Unicode values. If all of these methods fail, names are invented based on GlyphID (eg glyph00142)

It is possible that different glyphs use the same name. If this happens, we force the names to be unique by appending #n to the name (n being an integer number.) The original names are being kept, so this has no influence on a “round tripped” font.

Because the order in which glyphs are stored inside the binary font is important, we maintain an ordered list of glyph names in the font.

Optional Requirements

The fontTools package currently has no (required) external dependencies besides the modules included in the Python Standard Library. However, a few extra dependencies are required by some of its modules, which are needed to unlock optional features. The fonttools PyPI distribution also supports so-called “extras”, i.e. a set of keywords that describe a group of additional dependencies, which can be used when installing via pip, or when specifying a requirement. For example:

pip install fonttools[ufo,lxml,woff,unicode]

This command will install fonttools, as well as the optional dependencies that are required to unlock the extra features named “ufo”, etc.

• Lib/fontTools/misc/etree.py

  The module exports a ElementTree-like API for reading/writing XML files, and allows to use as the backend either the built-in xml.etree module or lxml. The latter is preferred whenever present, as it is generally faster and more secure.

  Extra: lxml

• Lib/fontTools/ufoLib

  Package for reading and writing UFO source files; it requires:

  • fs: (aka pyfilesystem2) filesystem abstraction layer.

  • enum34: backport for the built-in enum module (only required on Python < 3.4).

  Extra: ufo

• Lib/fontTools/ttLib/woff2.py

  Module to compress/decompress WOFF 2.0 web fonts; it requires:

  • brotli: Python bindings of the Brotli compression library.

  Extra: woff

• Lib/fontTools/ttLib/sfnt.py

  To better compress WOFF 1.0 web fonts, the following module can be used instead of the built-in zlib library:

  • zopfli: Python bindings of the Zopfli compression library.

  Extra: woff

• Lib/fontTools/unicode.py

  To display the Unicode character names when dumping the cmap table with ttx we use the unicodedata module in the Standard Library. The version included in there varies between different Python versions. To use the latest available data, you can install:

  • unicodedata2: unicodedata backport for Python 2.7 and 3.x updated to the latest Unicode version 12.0. Note this is not necessary if you use Python 3.8 as the latter already comes with an up-to-date unicodedata.

  Extra: unicode

• Lib/fontTools/varLib/interpolatable.py

  Module for finding wrong contour/component order between different masters. It requires one of the following packages in order to solve the so-called “minimum weight perfect matching problem in bipartite graphs”, or the Assignment problem:

  • scipy: the Scientific Library for Python, which internally uses NumPy arrays and hence is very fast;

  • munkres: a pure-Python module that implements the Hungarian or Kuhn-Munkres algorithm.

  Extra: interpolatable

• Lib/fontTools/varLib/plot.py

  Module for visualizing DesignSpaceDocument and resulting VariationModel.

  • matplotlib: 2D plotting library.

  Extra: plot

• Lib/fontTools/misc/symfont.py

  Advanced module for symbolic font statistics analysis; it requires:

  • sympy: the Python library for symbolic mathematics.

  Extra: symfont

• Lib/fontTools/t1Lib.py

  To get the file creator and type of Macintosh PostScript Type 1 fonts on Python 3 you need to install the following module, as the old MacOS module is no longer included in Mac Python:

  • xattr: Python wrapper for extended filesystem attributes (macOS platform only).

  Extra: type1

• Lib/fontTools/pens/cocoaPen.py

  Pen for drawing glyphs with Cocoa NSBezierPath, requires:

  • PyObjC: the bridge between Python and the Objective-C runtime (macOS platform only).

• Lib/fontTools/pens/qtPen.py

  Pen for drawing glyphs with Qt’s QPainterPath, requires:

  • PyQt5: Python bindings for the Qt cross platform UI and application toolkit.

• Lib/fontTools/pens/reportLabPen.py

  Pen to drawing glyphs as PNG images, requires:

  • reportlab: Python toolkit for generating PDFs and graphics.

4.6.0 (released 2020-03-24)

• [varLib] Added support for building variable BASE table version 1.1 (#1858).

• [CPAL] Added fromRGBA method to Color class (#1861).

4.5.0 (released 2020-03-20)

• [designspaceLib] Added add{Axis,Source,Instance,Rule}Descriptor methods to DesignSpaceDocument class, to initialize new descriptor objects using keyword arguments, and at the same time append them to the current document (#1860).

• [unicodedata] Update to Unicode 13.0 (#1859).

4.4.3 (released 2020-03-13)

• [varLib] Always build gvar table for TrueType-flavored Variable Fonts, even if it contains no variation data. The table is required according to the OpenType spec (#1855, #1857).

4.4.2 (released 2020-03-12)

• [ttx] Annotate LookupFlag in XML dump with comment explaining what bits are set and what they mean (#1850).

• [feaLib] Added more descriptive message to IncludedFeaNotFound error (#1842).

4.4.1 (released 2020-02-26)

• [woff2] Skip normalizing glyf and loca tables if these are missing from a font (e.g. in NotoColorEmoji using CBDT/CBLC tables).

• [timeTools] Use non-localized date parsing in timestampFromString, to fix error when non-English LC_TIME locale is set (#1838, #1839).

• [fontBuilder] Make sure the CFF table generated by fontBuilder can be used by varLib without having to compile and decompile the table first. This was breaking in converting the CFF table to CFF2 due to some unset attributes (#1836).

4.4.0 (released 2020-02-18)

• [colorLib] Added fontTools.colorLib.builder module, initially with buildCOLR and buildCPAL public functions. More color font formats will follow (#1827).

• [fontBuilder] Added setupCOLR and setupCPAL methods (#1826).

• [ttGlyphPen] Quantize GlyphComponent.transform floats to F2Dot14 to fix round-trip issue when computing bounding boxes of transformed components (#1830).

• [glyf] If a component uses reference points (firstPt and secondPt) for alignment (instead of X and Y offsets), compute the effective translation offset after having applied any transform (#1831).

• [glyf] When all glyphs have zero contours, compile glyf table data as a single null byte in order to pass validation by OTS and Windows (#1829).

• [feaLib] Parsing feature code now ensures that referenced glyph names are part of the known glyph set, unless a glyph set was not provided.

• [varLib] When filling in the default axis value for a missing location of a source or instance, correctly map the value forward.

• [varLib] The avar table can now contain mapping output values that are greater than OR EQUAL to the preceeding value, as the avar specification allows this.

• [varLib] The errors of the module are now ordered hierarchically below VarLibError. See #1821.

4.3.0 (released 2020-02-03)

• [EBLC/CBLC] Fixed incorrect padding length calculation for Format 3 IndexSubTable (#1817, #1818).

• [varLib] Fixed error when merging OTL tables and TTFonts were loaded as lazy=True (#1808, #1809).

• [varLib] Allow to use master fonts containing CFF2 table when building VF (#1816).

• [ttLib] Make recalcBBoxes option work also with CFF2 table (#1816).

• [feaLib] Don’t reset lookupflag in lookups defined inside feature blocks. They will now inherit the current lookupflag of the feature. This is what Adobe makeotf also does in this case (#1815).

• [feaLib] Fixed bug with mixed single/multiple substitutions. If a single substitution involved a glyph class, we were incorrectly using only the first glyph in the class (#1814).

4.2.5 (released 2020-01-29)

• [feaLib] Do not fail on duplicate multiple substitutions, only warn (#1811).

• [subset] Optimize SinglePos subtables to Format 1 if all ValueRecords are the same (#1802).

4.2.4 (released 2020-01-09)

• [unicodedata] Update RTL_SCRIPTS for Unicode 11 and 12.

4.2.3 (released 2020-01-07)

• [otTables] Fixed bug when splitting MarkBasePos subtables as offsets overflow. The mark class values in the split subtable were not being updated, leading to invalid mark-base attachments (#1797, googlefonts/noto-source#145).

• [feaLib] Only log a warning instead of error when features contain duplicate substitutions (#1767).

• [glifLib] Strip XML comments when parsing with lxml (#1784, #1785).

4.2.2 (released 2019-12-12)

• [subset] Fixed issue with subsetting FeatureVariations table when the index of features changes as features get dropped. The feature index need to be remapped to point to index of the remaining features (#1777, #1782).

• [fontBuilder] Added addFeatureVariations method to FontBuilder class. This is a shorthand for calling featureVars.addFeatureVariations on the builder’s TTFont object (#1781).

• [glyf] Fixed the flags bug in glyph.drawPoints() like we did for glyph.draw() (#1771, #1774).

4.2.1 (released 2019-12-06)

• [glyf] Use the flagOnCurve bit mask in glyph.draw(), so that we ignore the overlap flag that may be set when instantiating variable fonts (#1771).

4.2.0 (released 2019-11-28)

• [pens] Added the following pens:

  • roundingPen.RoundingPen: filter pen that rounds coordinates and components’ offsets to integer;

  • roundingPen.RoundingPointPen: like the above, but using PointPen protocol.

  • filterPen.FilterPointPen: base class for filter point pens;

  • transformPen.TransformPointPen: filter point pen to apply affine transform;

  • recordingPen.RecordingPointPen: records and replays point-pen commands.

• [ttGlyphPen] Always round float coordinates and component offsets to integers (#1763).

• [ufoLib] When converting kerning groups from UFO2 to UFO3, avoid confusing groups with the same name as one of the glyphs (#1761, #1762, unified-font-object/ufo-spec#98).

4.1.0 (released 2019-11-18)

• [instancer] Implemented restricting axis ranges (level 3 partial instancing). You can now pass {axis_tag: (min, max)} tuples as input to the instantiateVariableFont function. Note that changing the default axis position is not supported yet. The command-line script also accepts axis ranges in the form of colon-separated float values, e.g. wght=400:700 (#1753, #1537).

• [instancer] Never drop STAT DesignAxis records, but only prune out-of-range AxisValue records.

• [otBase/otTables] Enforce that VarStore.RegionAxisCount == fvar.axisCount, even when regions list is empty to appease OTS < v8.0 (#1752).

• [designspaceLib] Defined new processing attribute for <rules> element, with values “first” or “last”, plus other editorial changes to DesignSpace specification. Bumped format version to 4.1 (#1750).

• [varLib] Improved error message when masters’ glyph orders do not match (#1758, #1759).

• [featureVars] Allow to specify custom feature tag in addFeatureVariations; allow said feature to already exist, in which case we append new lookup indices to existing features. Implemented <rules> attribute processing according to DesignSpace specification update in #1750. Depending on this flag, we generate either an ‘rvrn’ (always processed first) or a ‘rclt’ feature (follows lookup order, therefore last) (#1747, #1625, #1371).

• [ttCollection] Added support for context manager auto-closing via with statement like with TTFont (#1751).

• [unicodedata] Require unicodedata2 >= 12.1.0.

• [py2.py3] Removed yet more PY2 vestiges (#1743).

• [_n_a_m_e] Fixed issue when comparing NameRecords with different string types (#1742).

• [fixedTools] Changed fixedToFloat to not do any rounding but simply return value / (1 << precisionBits). Added floatToFixedToStr and strToFixedToFloat functions to be used when loading from or dumping to XML. Fixed values (e.g. fvar axes and instance coordinates, avar mappings, etc.) are are now stored as un-rounded decimal floats upon decompiling (#1740, #737).

• [feaLib] Fixed handling of multiple LigatureCaret statements for the same glyph. Only the first rule per glyph is used, additional ones are ignored (#1733).

4.0.2 (released 2019-09-26)

• [voltLib] Added support for ALL and NONE in PROCESS_MARKS (#1732).

• [Silf] Fixed issue in Silf table compilation and decompilation regarding str vs bytes in python3 (#1728).

• [merge] Handle duplicate glyph names better: instead of appending font index to all glyph names, use similar code like we use in post and CFF tables (#1729).

4.0.1 (released 2019-09-11)

• [otTables] Support fixing offset overflows in MultipleSubst lookup subtables (#1706).

• [subset] Prune empty strikes in EBDT and CBDT table data (#1698, #1633).

• [pens] Fixed issue in PointToSegmentPen when last point of closed contour has same coordinates as the starting point and was incorrectly dropped (#1720).

• [Graphite] Fixed Sill table output to pass OTS (#1705).

• [name] Added removeNames method to table__n_a_m_e class (#1719).

• [ttLib] Added aliases for renamed entries ascender and descender in hhea table (#1715).

4.0.0 (released 2019-08-22)

• NOTE: The v4.x version series only supports Python 3.6 or greater. You can keep using fonttools 3.x if you need support for Python 2.

• [py23] Removed all the python2-only code since it is no longer reachable, thus unused; only the Python3 symbols were kept, but these are no-op. The module is now DEPRECATED and will removed in the future.

• [ttLib] Fixed UnboundLocalError for empty loca/glyph tables (#1680). Also, allow the glyf table to be incomplete when dumping to XML (#1681).

• [varLib.models] Fixed KeyError while sorting masters and there are no on-axis for a given axis (38a8eb0e).

• [cffLib] Make sure glyph names are unique (#1699).

• [feaLib] Fix feature parser to correctly handle octal numbers (#1700).

3.44.0 (released 2019-08-02)

• NOTE: This is the last scheduled release to support Python 2.7. The upcoming fonttools v4.x series is going to require Python 3.6 or greater.

• [varLib] Added new varLib.instancer module for partially instantiating variable fonts. This extends (and will eventually replace) varLib.mutator module, as it allows to create not just full static instances from a variable font, but also “partial” or “less variable” fonts where some of the axes are dropped or instantiated at a particular value. Also available from the command-line as fonttools varLib.instancer –help (#1537, #1628).

• [cffLib] Added support for FDSelect format 4 (#1677).

• [subset] Added support for subsetting sbix (Apple bitmap color font) table.

• [t1Lib] Fixed issue parsing eexec section in Type1 fonts when whitespace characters are interspersed among the trailing zeros (#1676).

• [cffLib.specializer] Fixed bug in programToCommands with CFF2 charstrings (#1669).

3.43.2 (released 2019-07-10)

• [featureVars] Fixed region-merging code on python3 (#1659).

• [varLib.cff] Fixed merging of sparse PrivateDict items (#1653).

3.43.1 (released 2019-06-19)

• [subset] Fixed regression when passing --flavor=woff2 option with an input font that was already compressed as WOFF 1.0 (#1650).

3.43.0 (released 2019-06-18)

• [woff2] Added support for compressing/decompressing WOFF2 fonts with non-transformed glyf and loca tables, as well as with transformed hmtx table. Removed Snippets/woff2_compress.py and Snippets/woff2_decompress.py scripts, and replaced them with a new console entry point fonttools ttLib.woff2 that provides two sub-commands compress and decompress.

• [varLib.cff] Fixed bug when merging CFF2 PrivateDicts. The PrivateDict data from the first region font was incorrecty used for all subsequent fonts. The bug would only affect variable CFF2 fonts with hinting (#1643, #1644). Also, fixed a merging bug when VF masters have no blends or marking glyphs (#1632, #1642).

• [loggingTools] Removed unused backport of LastResortLogger class.

• [subset] Gracefully handle partial MATH table (#1635).

• [featureVars] Avoid duplicate references to rvrn feature record in DefaultLangSys tables when calling addFeatureVariations on a font that does not already have a GSUB table (aa8a5bc6).

• [varLib] Fixed merging of class-based kerning. Before, the process could introduce rogue kerning values and variations for random classes against class zero (everything not otherwise classed).

• [varLib] Fixed merging GPOS tables from master fonts with different number of SinglePos subtables (#1621, #1641).

• [unicodedata] Updated Blocks, Scripts and ScriptExtensions to Unicode 12.1.

3.42.0 (released 2019-05-28)

• [OS/2] Fixed sign of fsType: it should be uint16, not int16 (#1619).

• [subset] Skip out-of-range class values in mark attachment (#1478).

• [fontBuilder] Add an empty DSIG table with setupDummyDSIG method (#1621).

• [varLib.merger] Fixed bug whereby GDEF.GlyphClassDef were being dropped when generating instance via varLib.mutator (#1614).

• [varLib] Added command-line options -v and -q to configure logging (#1613).

• [subset] Update font extents in head table (#1612).

• [subset] Make –retain-gids truncate empty glyphs after the last non-empty glyph (#1611).

• [requirements] Updated unicodedata2 backport for Unicode 12.0.

3.41.2 (released 2019-05-13)

• [cffLib] Fixed issue when importing a CFF2 variable font from XML, whereby the VarStore state was not propagated to PrivateDict (#1598).

• [varLib] Don’t drop post glyph names when building CFF2 variable font (#1609).

3.41.1 (released 2019-05-13)

• [designspaceLib] Added loadSourceFonts method to load source fonts using custom opener function (#1606).

• [head] Round font bounding box coordinates to integers to fix compile error if CFF font has float coordinates (#1604, #1605).

• [feaLib] Don’t write None in ast.ValueRecord.asFea() (#1599).

• [subset] Fixed issue AssertionError when using --desubroutinize option (#1590, #1594).

• [graphite] Fixed bug in Silf table’s decompile method unmasked by previous typo fix (#1597). Decode languange code as UTF-8 in Sill table’s decompile method (#1600).

3.41.0 (released 2019-04-29)

• [varLib/cffLib] Added support for building CFF2 variable font from sparse masters, or masters with more than one model (multiple VarStore.VarData). In cffLib.specializer, added support for CFF2 CharStrings with blend operators (#1547, #1591).

• [subset] Fixed subsetting HVAR and VVAR with --retain-gids option, and when advances mapping is null while sidebearings mappings are non-null (#1587, #1588).

• Added otlLib.maxContextCalc module to compute OS/2.usMaxContext value. Calculate it automatically when compiling features with feaLib. Added option --recalc-max-context to subset module (#1582).

• [otBase/otTables] Fixed AttributeError on missing OT table fields after importing font from TTX (#1584).

• [graphite] Fixed typo Silf table’s decompile method (#1586).

• [otlLib] Better compress GPOS SinglePos (LookupType 1) subtables (#1539).

3.40.0 (released 2019-04-08)

• [subset] Fixed error while subsetting VVAR with --retain-gids option (#1552).

• [designspaceLib] Use up-to-date default location in findDefault method (#1554).

• [voltLib] Allow passing file-like object to Parser.

• [arrayTools/glyf] calcIntBounds (used to compute bounding boxes of glyf table’s glyphs) now uses otRound instead of round3 (#1566).

• [svgLib] Added support for converting more SVG shapes to path d strings (ellipse, line, polyline), as well as support for transform attributes. Only matrix transformations are currently supported (#1564, #1564).

• [varLib] Added support for building VVAR table from vmtx and VORG tables (#1551).

• [fontBuilder] Enable making CFF2 fonts with post table format 2 (#1557).

• Fixed DeprecationWarning on invalid escape sequences (#1562).

3.39.0 (released 2019-03-19)

• [ttLib/glyf] Raise more specific error when encountering recursive component references (#1545, #1546).

• [Doc/designspaceLib] Defined new public.skipExportGlyphs lib key (#1534, unified-font-object/ufo-spec#84).

• [varLib] Use vmtx to compute vertical phantom points; or hhea.ascent and head.unitsPerEM if vmtx is missing (#1528).

• [gvar/cvar] Sort XML element’s min/value/max attributes in TupleVariation toXML to improve readability of TTX dump (#1527).

• [varLib.plot] Added support for 2D plots with only 1 variation axis (#1522).

• [designspaceLib] Use axes maps when normalizing locations in DesignSpaceDocument (#1226, #1521), and when finding default source (#1535).

• [mutator] Set OVERLAP_SIMPLE and OVERLAP_COMPOUND glyf flags by default in instantiateVariableFont. Added --no-overlap cli option to disable this (#1518).

• [subset] Fixed subsetting VVAR table (#1516, #1517). Fixed subsetting an HVAR table that has an AdvanceWidthMap when the option --retain-gids is used.

• [feaLib] Added forceChained in MultipleSubstStatement (#1511). Fixed double indentation of subtable statement (#1512). Added support for subtable statement in more places than just PairPos lookups (#1520). Handle lookupflag 0 and lookupflag without a value (#1540).

• [varLib] In load_designspace, provide a default English name for the ital axis tag.

• Remove pyftinspect because it is unmaintained and bitrotted.

3.38.0 (released 2019-02-18)

• [cffLib] Fixed RecursionError when unpickling or deepcopying TTFont with CFF table (#1488, 649dc49).

• [subset] Fixed AttributeError when using –desubroutinize option (#1490). Also, fixed desubroutinizing bug when subrs contain hints (#1499).

• [CPAL] Make Color a subclass of namedtuple (173a0f5).

• [feaLib] Allow hyphen in glyph class names.

• [feaLib] Added ‘tables’ option to __main__.py (#1497).

• [feaLib] Add support for special-case contextual positioning formatting (#1501).

• [svgLib] Support converting SVG basic shapes (rect, circle, etc.) into equivalent SVG paths (#1500, #1508).

• [Snippets] Added name-viewer.ipynb Jupyter notebook.

3.37.3 (released 2019-02-05)

• The previous release accidentally changed several files from Unix to DOS line-endings. Fix that.

3.37.2 (released 2019-02-05)

• [varLib] Temporarily revert the fix to load_masters(), which caused a crash in interpolate_layout() when deepcopy-ing OTFs.

3.37.1 (released 2019-02-05)

• [varLib] load_masters() now actually assigns the fonts it loads to the source.font attributes.

• [varLib] Fixed an MVAR table generation crash when sparse masters were involved.

• [voltLib] parse_coverage_() returns a tuple instead of an ast.Enum.

• [feaLib] A MarkClassDefinition inside a block is no longer doubly indented compared to the rest of the block.

3.37.0 (released 2019-01-28)

• [svgLib] Added support for converting elliptical arcs to cubic bezier curves (#1464).

• [py23] Added backport for math.isfinite.

• [varLib] Apply HIDDEN flag to fvar axis if designspace axis has attribute hidden=1.

• Fixed “DeprecationWarning: invalid escape sequence” in Python 3.7.

• [voltLib] Fixed parsing glyph groups. Distinguish different PROCESS_MARKS. Accept COMPONENT glyph type.

• [feaLib] Distinguish missing value and explicit <NULL> for PairPos2 format A (#1459). Round-trip useExtension keyword. Implemented ValueRecord.asFea method.

• [subset] Insert empty widths into hdmx when retaining gids (#1458).

3.36.0 (released 2019-01-17)

• [ttx] Added --no-recalc-timestamp option to keep the original font’s head.modified timestamp (#1455, #46).

• [ttx/psCharStrings] Fixed issues while dumping and round-tripping CFF2 table with ttx (#1451, #1452, #1456).

• [voltLib] Fixed check for duplicate anchors (#1450). Don’t try to read past the END operator in .vtp file (#1453).

• [varLib] Use sentinel value -0x8000 (-32768) to ignore post.underlineThickness and post.underlinePosition when generating MVAR deltas (#1449, googlei18n/ufo2ft#308).

• [subset] Added --retain-gids option to subset font without modifying the current glyph indices (#1443, #1447).

• [ufoLib] Replace deprecated calls to getbytes and setbytes with new equivalent readbytes and writebytes calls. fs >= 2.2 no required.

• [varLib] Allow loading masters from TTX files as well (#1441).

3.35.2 (released 2019-01-14)

• [hmtx/vmtx]: Allow to compile/decompile hmtx and vmtx tables even without the corresponding (required) metrics header tables, hhea and vhea (#1439).

• [varLib] Added support for localized axes’ labelname and named instances’ stylename (#1438).

3.35.1 (released 2019-01-09)

• [_m_a_x_p] Include maxComponentElements in maxp table’s recalculation.

3.35.0 (released 2019-01-07)

• [psCharStrings] In encodeFloat function, use float’s “general format” with 8 digits of precision (i.e. %8g) instead of str(). This works around a macOS rendering issue when real numbers in CFF table are too long, and also makes sure that floats are encoded with the same precision in python 2.7 and 3.x (#1430, googlei18n/ufo2ft#306).

• [_n_a_m_e/fontBuilder] Make _n_a_m_e_table.addMultilingualName also add Macintosh (platformID=1) names by default. Added options to FontBuilder setupNameTable method to optionally disable Macintosh or Windows names. (#1359, #1431).

• [varLib] Make build optionally accept a DesignSpaceDocument object, instead of a designspace file path. The caller can now set the font attribute of designspace’s sources to a TTFont object, thus allowing to skip filenames manipulation altogether (#1416, #1425).

• [sfnt] Allow SFNTReader objects to be deep-copied.

• Require typing>=3.6.4 on py27 to fix issue with singledispatch (#1423).

• [designspaceLib/t1Lib/macRes] Fixed some cases where pathlib.Path objects were not accepted (#1421).

• [varLib] Fixed merging of multiple PairPosFormat2 subtables (#1411).

• [varLib] The default STAT table version is now set to 1.1, to improve compatibility with legacy applications (#1413).

3.34.2 (released 2018-12-17)

• [merge] Fixed AssertionError when none of the script tables in GPOS/GSUB have a DefaultLangSys record (#1408, 135a4a1).

3.34.1 (released 2018-12-17)

• [varLib] Work around macOS rendering issue for composites without gvar entry (#1381).

3.34.0 (released 2018-12-14)

• [varLib] Support generation of CFF2 variable fonts. model.reorderMasters() now supports arbitrary mapping. Fix handling of overlapping ranges for feature variations (#1400).

• [cffLib, subset] Code clean-up and fixing related to CFF2 support.

• [ttLib.tables.ttProgram] Use raw strings for regex patterns (#1389).

• [fontbuilder] Initial support for building CFF2 fonts. Set CFF’s FontMatrix automatically from unitsPerEm.

• [plistLib] Accept the more general collections.Mapping instead of the specific dict class to support custom data classes that should serialize to dictionaries.

3.33.0 (released 2018-11-30)

• [subset] subsetter bug fix with variable fonts.

• [varLib.featureVar] Improve FeatureVariations generation with many rules.

• [varLib] Enable sparse masters when building variable fonts: https://github.com/fonttools/fonttools/pull/1368#issuecomment-437257368

• [varLib.mutator] Add IDEF for GETVARIATION opcode, for handling hints in an instance.

• [ttLib] Ignore the length of kern table subtable format 0

3.32.0 (released 2018-11-01)

• [ufoLib] Make UFOWriter a subclass of UFOReader, and use mixins for shared methods (#1344).

• [featureVars] Fixed normalization error when a condition’s minimum/maximum attributes are missing in designspace <rule> (#1366).

• [setup.py] Added [plot] to extras, to optionally install matplotlib, needed to use the fonTools.varLib.plot module.

• [varLib] Take total bounding box into account when resolving model (7ee81c8). If multiple axes have the same range ratio, cut across both (62003f4).

• [subset] Don’t error if STAT has no AxisValue tables.

• [fontBuilder] Added a new submodule which contains a FontBuilder wrapper class around TTFont that makes it easier to create a working TTF or OTF font from scratch with code. NOTE: the API is still experimental and may change in future versions.

3.31.0 (released 2018-10-21)

• [ufoLib] Merged the ufoLib master branch into a new fontTools.ufoLib package (#1335, #1095). Moved ufoLib.pointPen module to fontTools.pens.pointPen. Moved ufoLib.etree module to fontTools.misc.etree. Moved ufoLib.plistlib module to fontTools.misc.plistlib. To use the new fontTools.ufoLib module you need to install fonttools with the [ufo] extra, or you can manually install the required additional dependencies (cf. README.rst).

• [morx] Support AAT action type to insert glyphs and clean up compilation of AAT action tables (4a1871f, 2011ccf).

• [subset] The --no-hinting on a CFF font now also drops the optional hinting keys in Private dict: ForceBold, LanguageGroup, and ExpansionFactor (#1322).

• [subset] Include nameIDs referenced by STAT table (#1327).

• [loggingTools] Added msg=None argument to CapturingLogHandler.assertRegex (0245f2c).

• [varLib.mutator] Implemented FeatureVariations instantiation (#1244).

• [g_l_y_f] Added PointPen support to _TTGlyph objects (#1334).

3.30.0 (released 2018-09-18)

• [feaLib] Skip building noop class PairPos subtables when Coverage is NULL (#1318).

• [ttx] Expose the previously reserved bit flag OVERLAP_SIMPLE of glyf table’s contour points in the TTX dump. This is used in some implementations to specify a non-zero fill with overlapping contours (#1316).

• [ttLib] Added support for decompiling/compiling TS1C tables containing VTT sources for cvar variation table (#1310).

• [varLib] Use fontTools.designspaceLib to read DesignSpaceDocument. The fontTools.varLib.designspace module is now deprecated and will be removed in future versions. The presence of an explicit axes element is now required in order to build a variable font (#1224, #1313).

• [varLib] Implemented building GSUB FeatureVariations table from the rules element of DesignSpace document (#1240, #713, #1314).

• [subset] Added --no-layout-closure option to not expand the subset with the glyphs produced by OpenType layout features. Instead, OpenType features will be subset to only rules that are relevant to the otherwise-specified glyph set (#43, #1121).

3.29.1 (released 2018-09-10)

• [feaLib] Fixed issue whereby lookups from DFLT/dflt were not included in the DFLT/non-dflt language systems (#1307).

• [graphite] Fixed issue on big-endian architectures (e.g. ppc64) (#1311).

• [subset] Added --layout-scripts option to add/exclude set of OpenType layout scripts that will be preserved. By default all scripts are retained ('*') (#1303).

3.29.0 (released 2018-07-26)

• [feaLib] In the OTL table builder, when the name table is excluded from the list of tables to be build, skip compiling featureNames blocks, as the records referenced in FeatureParams table don’t exist (68951b7).

• [otBase] Try ExtensionLookup if other offset-overflow methods fail (05f95f0).

• [feaLib] Added support for explicit subtable; break statements in PairPos lookups; previously these were ignored (#1279, #1300, #1302).

• [cffLib.specializer] Make sure the stack depth does not exceed maxstack - 1, so that a subroutinizer can insert subroutine calls (#1301, https://github.com/googlei18n/ufo2ft/issues/266).

• [otTables] Added support for fixing offset overflow errors occurring inside MarkBasePos subtables (#1297).

• [subset] Write the default output file extension based on --flavor option, or the value of TTFont.sfntVersion (d7ac0ad).

• [unicodedata] Updated Blocks, Scripts and ScriptExtensions for Unicode 11 (452c85e).

• [xmlWriter] Added context manager to XMLWriter class to autoclose file descriptor on exit (#1290).

• [psCharStrings] Optimize the charstring’s bytecode by encoding as integers all float values that have no decimal portion (8d7774a).

• [ttFont] Fixed missing import of TTLibError exception (#1285).

• [feaLib] Allow any languages other than dflt under DFLT script (#1278, #1292).

3.28.0 (released 2018-06-19)

• [featureVars] Added experimental module to build FeatureVariations tables. Still needs to be hooked up to varLib.build (#1240).

• [fixedTools] Added otRound to round floats to nearest integer towards positive Infinity. This is now used where we deal with visual data like X/Y coordinates, advance widths/heights, variation deltas, and similar (#1274, #1248).

• [subset] Improved GSUB closure memoize algorithm.

• [varLib.models] Fixed regression in model resolution (180124, #1269).

• [feaLib.ast] Fixed error when converting SubtableStatement to string (#1275).

• [varLib.mutator] Set OS/2.usWeightClass and usWidthClass, and post.italicAngle based on the ‘wght’, ‘wdth’ and ‘slnt’ axis values (#1276, #1264).

• [py23/loggingTools] Don’t automatically set logging.lastResort handler on py27. Moved LastResortLogger to the loggingTools module (#1277).

3.27.1 (released 2018-06-11)

• [ttGlyphPen] Issue a warning and skip building non-existing components (https://github.com/googlei18n/fontmake/issues/411).

• [tests] Fixed issue running ttx_test.py from a tagged commit.

3.27.0 (released 2018-06-11)

• [designspaceLib] Added new conditionSet element to rule element in designspace document. Bumped format attribute to 4.0 (previously, it was formatted as an integer). Removed checkDefault, checkAxes methods, and any kind of guessing about the axes when the <axes> element is missing. The default master is expected at the intersection of all default values for each axis (#1254, #1255, #1267).

• [cffLib] Fixed issues when compiling CFF2 or converting from CFF when the font has an FDArray (#1211, #1271).

• [varLib] Avoid attempting to build cvar table when glyf table is not present, as is the case for CFF2 fonts.

• [subset] Handle None coverages in MarkGlyphSets; revert commit 02616ab that sets empty Coverage tables in MarkGlyphSets to None, to make OTS happy.

• [ttFont] Allow to build glyph order from maxp.numGlyphs when post or cmap are missing.

• [ttFont] Added __len__ method to _TTGlyphSet.

• [glyf] Ensure GlyphCoordinates never overflow signed shorts (#1230).

• [py23] Added alias for itertools.izip shadowing the built-in zip.

• [loggingTools] Memoize log property of LogMixin class (fbab12).

• [ttx] Impoved test coverage (#1261).

• [Snippets] Addded script to append a suffix to all family names in a font.

• [varLib.plot] Make it work with matplotlib >= 2.1 (b38e2b).

3.26.0 (released 2018-05-03)

• [designspace] Added a new optional layer attribute to the source element, and a corresponding layerName attribute to the SourceDescriptor object (#1253). Added conditionset element to the rule element to the spec, but not implemented in designspace reader/writer yet (#1254).

• [varLib.models] Refine modeling one last time (0ecf5c5).

• [otBase] Fixed sharing of tables referred to by different offset sizes (795f2f9).

• [subset] Don’t drop a GDEF that only has VarStore (fc819d6). Set to None empty Coverage tables in MarkGlyphSets (02616ab).

• [varLib]: Added --master-finder command-line option (#1249).

• [varLib.mutator] Prune fvar nameIDs from instance’s name table (#1245).

• [otTables] Allow decompiling bad ClassDef tables with invalid format, with warning (#1236).

• [varLib] Make STAT v1.2 and reuse nameIDs from fvar table (#1242).

• [varLib.plot] Show master locations. Set axis limits to -1, +1.

• [subset] Handle HVAR direct mapping. Passthrough ‘cvar’. Added --font-number command-line option for collections.

• [t1Lib] Allow a text encoding to be specified when parsing a Type 1 font (#1234). Added kind argument to T1Font constructor (c5c161c).

• [ttLib] Added context manager API to TTFont class, so it can be used in with statements to auto-close the file when exiting the context (#1232).

3.25.0 (released 2018-04-03)

• [varLib] Improved support-resolution algorithm. Previously, the on-axis masters would always cut the space. They don’t anymore. That’s more consistent, and fixes the main issue Erik showed at TYPO Labs 2017. Any varfont built that had an unusual master configuration will change when rebuilt (42bef17, a523a697, https://github.com/googlei18n/fontmake/issues/264).

• [varLib.models] Added a main() entry point, that takes positions and prints model results.

• [varLib.plot] Added new module to plot a designspace’s VariationModel. Requires matplotlib.

• [varLib.mutator] Added -o option to specify output file path (2ef60fa).

• [otTables] Fixed IndexError while pruning of HVAR pre-write (6b6c34a).

• [varLib.models] Convert delta array to floats if values overflows signed short integer (0055f94).

3.24.2 (released 2018-03-26)

• [otBase] Don’t fail during ValueRecord copy if src has more items. We drop hinting in the subsetter by simply changing ValueFormat, without cleaning up the actual ValueRecords. This was causing assertion error if a variable font was subsetted without hinting and then passed directly to the mutator for instantiation without first it saving to disk.

3.24.1 (released 2018-03-06)

• [varLib] Don’t remap the same DeviceTable twice in VarStore optimizer (#1206).

• [varLib] Add --disable-iup option to fonttools varLib script, and a optimize=True keyword argument to varLib.build function, to optionally disable IUP optimization while building varfonts.

• [ttCollection] Fixed issue while decompiling ttc with python3 (#1207).

3.24.0 (released 2018-03-01)

• [ttGlyphPen] Decompose composite glyphs if any components’ transform is too large to fit a F2Dot14 value, or clamp transform values that are (almost) equal to +2.0 to make them fit and avoid decomposing (#1200, #1204, #1205).

• [ttx] Added new -g option to dump glyphs from the glyf table splitted as individual ttx files (#153, #1035, #1132, #1202).

• Copied ufoLib.filenames module to fontTools.misc.filenames, used for the ttx split-glyphs option (#1202).

• [feaLib] Added support for cvParameters blocks in Character Variant feautures cv01-cv99 (#860, #1169).

• [Snippets] Added checksum.py script to generate/check SHA1 hash of ttx files (#1197).

• [varLib.mutator] Fixed issue while instantiating some variable fonts whereby the horizontal advance width computed from gvar phantom points could turn up to be negative (#1198).

• [varLib/subset] Fixed issue with subsetting GPOS variation data not picking up ValueRecord Device objects (54fd71f).

• [feaLib/voltLib] In all AST elements, the location is no longer a required positional argument, but an optional kewyord argument (defaults to None). This will make it easier to construct feature AST from code (#1201).

3.23.0 (released 2018-02-26)

• [designspaceLib] Added an optional lib element to the designspace as a whole, as well as to the instance elements, to store arbitrary data in a property list dictionary, similar to the UFO’s lib. Added an optional font attribute to the SourceDescriptor, to allow operating on in-memory font objects (#1175).

• [cffLib] Fixed issue with lazy-loading of attributes when attempting to set the CFF TopDict.Encoding (#1177, #1187).

• [ttx] Fixed regression introduced in 3.22.0 that affected the split tables -s option (#1188).

• [feaLib] Added IncludedFeaNotFound custom exception subclass, raised when an included feature file cannot be found (#1186).

• [otTables] Changed VarIdxMap to use glyph names internally instead of glyph indexes. The old ttx dumps of HVAR/VVAR tables that contain indexes can still be imported (21cbab8, 38a0ffb).

• [varLib] Implemented VarStore optimizer (#1184).

• [subset] Implemented pruning of GDEF VarStore, HVAR and MVAR (#1179).

• [sfnt] Restore backward compatiblity with numFonts attribute of SFNTReader object (#1181).

• [merge] Initial support for merging LangSysRecords (#1180).

• [ttCollection] don’t seek(0) when writing to possibly unseekable strems.

• [subset] Keep all --name-IDs from 0 to 6 by default (#1170, #605, #114).

• [cffLib] Added width module to calculate optimal CFF default and nominal glyph widths.

• [varLib] Don’t fail if STAT already in the master fonts (#1166).

3.22.0 (released 2018-02-04)

• [subset] Support subsetting endchar acting as seac-like components in CFF (fixes #1162).

• [feaLib] Allow to build from pre-parsed ast.FeatureFile object. Added tables argument to only build some tables instead of all (#1159, #1163).

• [textTools] Replaced safeEval with ast.literal_eval (#1139).

• [feaLib] Added option to the parser to not resolve include statements (#1154).

• [ttLib] Added new ttCollection module to read/write TrueType and OpenType Collections. Exports a TTCollection class with a fonts attribute containing a list of TTFont instances, the methods save and saveXML, plus some list-like methods. The importXML method is not implemented yet (#17).

• [unicodeadata] Added ot_tag_to_script function that converts from OpenType script tag to Unicode script code.

• Added new designspaceLib subpackage, originally from Erik Van Blokland’s designSpaceDocument: https://github.com/LettError/designSpaceDocument NOTE: this is not yet used internally by varLib, and the API may be subject to changes (#911, #1110, LettError/designSpaceDocument#28).

• Added new FontTools icon images (8ee7c32).

• [unicodedata] Added script_horizontal_direction function that returns either “LTR” or “RTL” given a unicode script code.

• [otConverters] Don’t write descriptive name string as XML comment if the NameID value is 0 (== NULL) (#1151, #1152).

• [unicodedata] Add ot_tags_from_script function to get the list of OpenType script tags associated with unicode script code (#1150).

• [feaLib] Don’t error when “enumerated” kern pairs conflict with preceding single pairs; emit warning and chose the first value (#1147, #1148).

• [loggingTools] In CapturingLogHandler.assertRegex method, match the fully formatted log message.

• [sbix] Fixed TypeError when concatenating str and bytes (#1154).

• [bezierTools] Implemented cusp support and removed approximate_fallback arg in calcQuadraticArcLength. Added calcCubicArcLength (#1142).

3.21.2 (released 2018-01-08)

• [varLib] Fixed merging PairPos Format1/2 with missing subtables (#1125).

3.21.1 (released 2018-01-03)

• [feaLib] Allow mixed single/multiple substitutions (#612)

• Added missing *.afm test assets to MAINFEST.in (#1137).

• Fixed dumping SVG tables containing color palettes (#1124).

3.21.0 (released 2017-12-18)

• [cmap] when compiling format6 subtable, don’t assume gid0 is always called ‘.notdef’ (1e42224).

• [ot] Allow decompiling fonts with bad Coverage format number (1aafae8).

• Change FontTools licence to MIT (#1127).

• [post] Prune extra names already in standard Mac set (df1e8c7).

• [subset] Delete empty SubrsIndex after subsetting (#994, #1118).

• [varLib] Don’t share points in cvar by default, as it currently fails on some browsers (#1113).

• [afmLib] Make poor old afmLib work on python3.

3.20.1 (released 2017-11-22)

• [unicodedata] Fixed issue with script and script_extension functions returning inconsistent short vs long names. They both return the short four- letter script codes now. Added script_name and script_code functions to look up the long human-readable script name from the script code, and viceversa (#1109, #1111).

3.20.0 (released 2017-11-21)

• [unicodedata] Addded new module fontTools.unicodedata which exports the same interface as the built-in unicodedata module, with the addition of a few functions that are missing from the latter, such as script, script_extension and block. Added a MetaTools/buildUCD.py script to download and parse data files from the Unicode Character Database and generate python modules containing lists of ranges and property values.

• [feaLib] Added __str__ method to all ast elements (delegates to the asFea method).

• [feaLib] Parser constructor now accepts a glyphNames iterable instead of glyphMap dict. The latter still works but with a pending deprecation warning (#1104).

• [bezierTools] Added arc length calculation functions originally from pens.perimeterPen module (#1101).

• [varLib] Started generating STAT table (8af4309). Right now it just reflects the axes, and even that with certain limitations: * AxisOrdering is set to the order axes are defined, * Name-table entries are not shared with fvar.

• [py23] Added backports for redirect_stdout and redirect_stderr context managers (#1097).

• [Graphite] Fixed some round-trip bugs (#1093).

3.19.0 (released 2017-11-06)

• [varLib] Try set of used points instead of all points when testing whether to share points between tuples (#1090).

• [CFF2] Fixed issue with reading/writing PrivateDict BlueValues to TTX file. Read the commit message 8b02b5a and issue #1030 for more details. NOTE: this change invalidates all the TTX files containing CFF2 tables that where dumped with previous verisons of fonttools. CFF2 Subr items can have values on the stack after the last operator, thus a CFF2Subr class was added to accommodate this (#1091).

• [_k_e_r_n] Fixed compilation of AAT kern version=1.0 tables (#1089, #1094)

• [ttLib] Added getBestCmap() convenience method to TTFont class and cmap table class that returns a preferred Unicode cmap subtable given a list of options (#1092).

• [morx] Emit more meaningful subtable flags. Implement InsertionMorphAction

3.18.0 (released 2017-10-30)

• [feaLib] Fixed writing back nested glyph classes (#1086).

• [TupleVariation] Reactivated shared points logic, bugfixes (#1009).

• [AAT] Implemented morx ligature subtables (#1082).

• [reverseContourPen] Keep duplicate lineTo following a moveTo (#1080, https://github.com/googlei18n/cu2qu/issues/51).

• [varLib.mutator] Suport instantiation of GPOS, GDEF and MVAR (#1079).

• [sstruct] Fixed issue with unicode_literals and struct module in old versions of python 2.7 (#993).

3.17.0 (released 2017-10-16)

• [svgPathPen] Added an SVGPathPen that translates segment pen commands into SVG path descriptions. Copied from Tal Leming’s ufo2svg.svgPathPen https://github.com/typesupply/ufo2svg/blob/d69f992/Lib/ufo2svg/svgPathPen.py

• [reverseContourPen] Added ReverseContourPen, a filter pen that draws contours with the winding direction reversed, while keeping the starting point (#1071).

• [filterPen] Added ContourFilterPen to manipulate contours as a whole rather than segment by segment.

• [arrayTools] Added Vector class to apply math operations on an array of numbers, and pairwise function to loop over pairs of items in an iterable.

• [varLib] Added support for building and interpolation of cvar table (f874cf6, a25a401).

3.16.0 (released 2017-10-03)

• [head] Try using SOURCE_DATE_EPOCH environment variable when setting the head modified timestamp to ensure reproducible builds (#1063). See https://reproducible-builds.org/specs/source-date-epoch/

• [VTT] Decode VTT’s TSI* tables text as UTF-8 (#1060).

• Added support for Graphite font tables: Feat, Glat, Gloc, Silf and Sill. Thanks @mhosken! (#1054).

• [varLib] Default to using axis “name” attribute if “labelname” element is missing (588f524).

• [merge] Added support for merging Script records. Remove unused features and lookups after merge (d802580, 556508b).

• Added fontTools.svgLib package. Includes a parser for SVG Paths that supports the Pen protocol (#1051). Also, added a snippet to convert SVG outlines to UFO GLIF (#1053).

• [AAT] Added support for ankr, bsln, mort, morx, gcid, and cidg.

• [subset] Implemented subsetting of prop, opbd, bsln, lcar.

3.15.1 (released 2017-08-18)

• [otConverters] Implemented __add__ and __radd__ methods on otConverters._LazyList that decompile a lazy list before adding it to another list or _LazyList instance. Fixes an AttributeError in the subset module when attempting to sum _LazyList objects (6ef48bd2, 1aef1683).

• [AAT] Support the opbd table with optical bounds (a47f6588).

• [AAT] Support prop table with glyph properties (d05617b4).

3.15.0 (released 2017-08-17)

• [AAT] Added support for AAT lookups. The lcar table can be decompiled and recompiled; futher work needed to handle morx table (#1025).

• [subset] Keep (empty) DefaultLangSys for Script ‘DFLT’ (6eb807b5).

• [subset] Support GSUB/GPOS.FeatureVariations (fe01d87b).

• [varLib] In models.supportScalars, ignore an axis when its peak value is 0 (fixes #1020).

• [varLib] Add default mappings to all axes in avar to fix rendering issue in some rasterizers (19c4b377, 04eacf13).

• [varLib] Flatten multiple tail PairPosFormat2 subtables before merging (c55ef525).

• [ttLib] Added support for recalculating font bounding box in CFF and head tables, and min/max values in hhea and vhea tables (#970).

3.14.0 (released 2017-07-31)

• [varLib.merger] Remove Extensions subtables before merging (f7c20cf8).

• [varLib] Initialize the avar segment map with required default entries (#1014).

• [varLib] Implemented optimal IUP optmiziation (#1019).

• [otData] Add AxisValueFormat4 for STAT table v1.2 from OT v1.8.2 (#1015).

• [name] Fixed BCP46 language tag for Mac langID=9: ‘si’ -> ‘sl’.

• [subset] Return value from _DehintingT2Decompiler.op_hintmask (c0d672ba).

• [cffLib] Allow to get TopDict by index as well as by name (dca96c9c).

• [cffLib] Removed global isCFF2 state; use one set of classes for both CFF and CFF2, maintaining backward compatibility existing code (#1007).

• [cffLib] Deprecated maxstack operator, per OpenType spec update 1.8.1.

• [cffLib] Added missing default (-100) for UnderlinePosition (#983).

• [feaLib] Enable setting nameIDs greater than 255 (#1003).

• [varLib] Recalculate ValueFormat when merging SinglePos (#996).

• [varLib] Do not emit MVAR if there are no entries in the variation store (#987).

• [ttx] For -x option, pad with space if table tag length is < 4.

3.13.1 (released 2017-05-30)

• [feaLib.builder] Removed duplicate lookups optimization. The original lookup order and semantics of the feature file are preserved (#976).

3.13.0 (released 2017-05-24)

• [varLib.mutator] Implement IUP optimization (#969).

• [_g_l_y_f.GlyphCoordinates] Changed __bool__() semantics to match those of other iterables (e46f949). Removed __abs__() (3db5be2).

• [varLib.interpolate_layout] Added mapped keyword argument to interpolate_layout to allow disabling avar mapping: if False (default), the location is mapped using the map element of the axes in designspace file; if True, it is assumed that location is in designspace’s internal space and no mapping is performed (#950, #975).

• [varLib.interpolate_layout] Import designspace-loading logic from varLib.

• [varLib] Fixed bug with recombining PairPosClass2 subtables (81498e5, #914).

• [cffLib.specializer] When copying iterables, cast to list (462b7f86).

3.12.1 (released 2017-05-18)

• [pens.t2CharStringPen] Fixed AttributeError when calling addComponent in T2CharStringPen (#965).

3.12.0 (released 2017-05-17)

• [cffLib.specializer] Added new specializer module to optimize CFF charstrings, used by the T2CharStringPen (#948).

• [varLib.mutator] Sort glyphs by component depth before calculating composite glyphs’ bounding boxes to ensure deltas are correctly caclulated (#945).

• [_g_l_y_f] Fixed loss of precision in GlyphCoordinates by using ‘d’ (double) instead of ‘f’ (float) as array.array typecode (#963, #964).

3.11.0 (released 2017-05-03)

• [t2CharStringPen] Initial support for specialized Type2 path operators: vmoveto, hmoveto, vlineto, hlineto, vvcurveto, hhcurveto, vhcurveto and hvcurveto. This should produce more compact charstrings (#940, #403).

• [Doc] Added Sphinx sources for the documentation. Thanks @gferreira (#935).

• [fvar] Expose flags in XML (#932)

• [name] Add helper function for building multi-lingual names (#921)

• [varLib] Fixed kern merging when a PairPosFormat2 has ClassDef1 with glyphs that are NOT present in the Coverage (1b5e1c4, #939).

• [varLib] Fixed non-deterministic ClassDef order with PY3 (f056c12, #927).

• [feLib] Throw an error when the same glyph is defined in multiple mark classes within the same lookup (3e3ff00, #453).

3.10.0 (released 2017-04-14)

• [varLib] Added support for building avar table, using the designspace <map> elements.

• [varLib] Removed unused build(..., axisMap) argument. Axis map should be specified in designspace file now. We do not accept nonstandard axes if <axes> element is not present.

• [varLib] Removed “custom” axis from the standard_axis_map. This was added before when glyphsLib was always exporting the (unused) custom axis.

• [varLib] Added partial support for building MVAR table; does not implement gasp table variations yet.

• [pens] Added FilterPen base class, for pens that control another pen; factored out addComponent method from BasePen into a separate abstract DecomposingPen class; added DecomposingRecordingPen, which records components decomposed as regular contours.

• [TSI1] Fixed computation of the textLength of VTT private tables (#913).

• [loggingTools] Added LogMixin class providing a log property to subclasses, which returns a logging.Logger named after the latter.

• [loggingTools] Added assertRegex method to CapturingLogHandler.

• [py23] Added backport for python 3’s types.SimpleNamespace class.

• [EBLC] Fixed issue with python 3 zip iterator.

3.9.2 (released 2017-04-08)

• [pens] Added pen to draw glyphs using WxPython GraphicsPath class: https://wxpython.org/docs/api/wx.GraphicsPath-class.html

• [varLib.merger] Fixed issue with recombining multiple PairPosFormat2 subtables (#888)

• [varLib] Do not encode gvar deltas that are all zeroes, or if all values are smaller than tolerance.

• [ttLib] _TTGlyphSet glyphs now also have height and tsb (top side bearing) attributes from the vmtx table, if present.

• [glyf] In GlyphCoordintes class, added __bool__ / __nonzero__ methods, and array property to get raw array.

• [ttx] Support reading TTX files with BOM (#896)

• [CFF2] Fixed the reporting of the number of regions in the font.

3.9.1 (released 2017-03-20)

• [varLib.merger] Fixed issue while recombining multiple PairPosFormat2 subtables if they were split because of offset overflows (9798c30).

• [varLib.merger] Only merge multiple PairPosFormat1 subtables if there is at least one of the fonts with a non-empty Format1 subtable (0f5a46b).

• [varLib.merger] Fixed IndexError with empty ClassDef1 in PairPosFormat2 (aad0d46).

• [varLib.merger] Avoid reusing Class2Record (mutable) objects (e6125b3).

• [varLib.merger] Calculate ClassDef1 and ClassDef2’s Format when merging PairPosFormat2 (23511fd).

• [macUtils] Added missing ttLib import (b05f203).

3.9.0 (released 2017-03-13)

• [feaLib] Added (partial) support for parsing feature file comments # ... appearing in between statements (#879).

• [feaLib] Cleaned up syntax tree for FeatureNames.

• [ttLib] Added support for reading/writing CFF2 table (thanks to @readroberts at Adobe), and TTFA (ttfautohint) table.

• [varLib] Fixed regression introduced with 3.8.0 in the calculation of NumShorts, i.e. the number of deltas in ItemVariationData’s delta sets that use a 16-bit representation (b2825ff).

3.8.0 (released 2017-03-05)

• New pens: MomentsPen, StatisticsPen, RecordingPen, and TeePen.

• [misc] Added new fontTools.misc.symfont module, for symbolic font statistical analysis; requires sympy (http://www.sympy.org/en/index.html)

• [varLib] Added experimental fontTools.varLib.interpolatable module for finding wrong contour order between different masters

• [varLib] designspace.load() now returns a dictionary, instead of a tuple, and supports <axes> element (#864); the ‘masters’ item was renamed ‘sources’, like the <sources> element in the designspace document

• [ttLib] Fixed issue with recalculating head modified timestamp when saving CFF fonts

• [ttLib] In TupleVariation, round deltas before compiling (#861, fixed #592)

• [feaLib] Ignore duplicate glyphs in classes used as MarkFilteringSet and MarkAttachmentType (#863)

• [merge] Changed the gasp table merge logic so that only the one from the first font is retained, similar to other hinting tables (#862)

• [Tests] Added tests for the varLib package, as well as test fonts from the “Annotated OpenType Specification” (AOTS) to exercise ttLib’s table readers/writers (<https://github.com/adobe-type-tools/aots>)

3.7.2 (released 2017-02-17)

• [subset] Keep advance widths when stripping “.notdef” glyph outline in CID-keyed CFF fonts (#845)

• [feaLib] Zero values now produce the same results as makeotf (#633, #848)

• [feaLib] More compact encoding for “Contextual positioning with in-line single positioning rules” (#514)

3.7.1 (released 2017-02-15)

• [subset] Fixed issue with --no-hinting option whereby advance widths in Type 2 charstrings were also being stripped (#709, #343)

• [feaLib] include statements now resolve relative paths like makeotf (#838)

• [feaLib] table name now handles Unicode codepoints beyond the Basic Multilingual Plane, also supports old-style MacOS platform encodings (#842)

• [feaLib] correctly escape string literals when emitting feature syntax (#780)

3.7.0 (released 2017-02-11)

• [ttx, mtiLib] Preserve ordering of glyph alternates in GSUB type 3 (#833).

• [feaLib] Glyph names can have dashes, as per new AFDKO syntax v1.20 (#559).

• [feaLib] feaLib.Parser now needs the font’s glyph map for parsing.

• [varLib] Fix regression where GPOS values were stored as 0.

• [varLib] Allow merging of class-based kerning when ClassDefs are different

3.6.3 (released 2017-02-06)

• [varLib] Fix building variation of PairPosFormat2 (b5c34ce).

• Populate defaults even for otTables that have postRead (e45297b).

• Fix compiling of MultipleSubstFormat1 with zero ‘out’ glyphs (b887860).

3.6.2 (released 2017-01-30)

• [varLib.merger] Fixed “TypeError: reduce() of empty sequence with no initial value” (3717dc6).

3.6.1 (released 2017-01-28)

• [py23] Fixed unhandled exception occurring at interpreter shutdown in the “last resort” logging handler (972b3e6).

• [agl] Ensure all glyph names are of native ‘str’ type; avoid mixing ‘str’ and ‘unicode’ in TTFont.glyphOrder (d8c4058).

• Fixed inconsistent title levels in README.rst that caused PyPI to incorrectly render the reStructuredText page.

3.6.0 (released 2017-01-26)

• [varLib] Refactored and improved the variation-font-building process.

• Assembly code in the fpgm, prep, and glyf tables is now indented in XML output for improved readability. The instruction element is written as a simple tag if empty (#819).

• [ttx] Fixed ‘I/O operation on closed file’ error when dumping multiple TTXs to standard output with the ‘-o -’ option.

• The unit test modules (*_test.py) have been moved outside of the fontTools package to the Tests folder, thus they are no longer installed (#811).

3.5.0 (released 2017-01-14)

• Font tables read from XML can now be written back to XML with no loss.

• GSUB/GPOS LookupType is written out in XML as an element, not comment. (#792)

• When parsing cmap table, do not store items mapped to glyph id 0. (#790)

• [otlLib] Make ClassDef sorting deterministic. Fixes #766 (7d1ddb2)

• [mtiLib] Added unit tests (#787)

• [cvar] Implemented cvar table

• [gvar] Renamed GlyphVariation to TupleVariation to match OpenType terminology.

• [otTables] Handle gracefully empty VarData.Item array when compiling XML. (#797)

• [varLib] Re-enabled generation of HVAR table for fonts with TrueType outlines; removed --build-HVAR command-line option.

• [feaLib] The parser can now be extended to support non-standard statements in FEA code by using a customized Abstract Syntax Tree. See, for example, feaLib.builder_test.test_extensions and baseClass.feax (#794, fixes #773).

• [feaLib] Added feaLib command to the ‘fonttools’ command-line tool; applies a feature file to a font. fonttools feaLib -h for help.

• [pens] The T2CharStringPen now takes an optional roundTolerance argument to control the rounding of coordinates (#804, fixes #769).

• [ci] Measure test coverage on all supported python versions and OSes, combine coverage data and upload to https://codecov.io/gh/fonttools/fonttools (#786)

• [ci] Configured Travis and Appveyor for running tests on Python 3.6 (#785, 55c03bc)

• The manual pages installation directory can be customized through FONTTOOLS_MANPATH environment variable (#799, fixes #84).

• [Snippets] Added otf2ttf.py, for converting fonts from CFF to TrueType using the googlei18n/cu2qu module (#802)

3.4.0 (released 2016-12-21)

• [feaLib] Added support for generating FEA text from abstract syntax tree (AST) objects (#776). Thanks @mhosken

• Added agl.toUnicode function to convert AGL-compliant glyph names to Unicode strings (#774)

• Implemented MVAR table (b4d5381)

3.3.1 (released 2016-12-15)

• [setup] We no longer use versioneer.py to compute fonttools version from git metadata, as this has caused issues for some users (#767). Now we bump the version strings manually with a custom release command of setup.py script.

3.3.0 (released 2016-12-06)

• [ttLib] Implemented STAT table from OpenType 1.8 (#758)

• [cffLib] Fixed decompilation of CFF fonts containing non-standard key/value pairs in FontDict (issue #740; PR #744)

• [py23] minor: in round3 function, allow the second argument to be None (#757)

• The standalone sstruct and xmlWriter modules, deprecated since vesion 3.2.0, have been removed. They can be imported from the fontTools.misc package.

3.2.3 (released 2016-12-02)

• [py23] optimized performance of round3 function; added backport for py35 math.isclose() (9d8dacb)

• [subset] fixed issue with ‘narrow’ (UCS-2) Python 2 builds and --text/--text-file options containing non-BMP chararcters (16d0e5e)

• [varLib] fixed issuewhen normalizing location values (8fa2ee1, #749)

• [inspect] Made it compatible with both python2 and python3 (167ee60, #748). Thanks @pnemade

3.2.2 (released 2016-11-24)

• [varLib] Do not emit null axes in fvar (1bebcec). Thanks @robmck-ms

• [varLib] Handle fonts without GPOS (7915a45)

• [merge] Ignore LangSys if None (a11bc56)

• [subset] Fix subsetting MathVariants (78d3cbe)

• [OS/2] Fix “Private Use (plane 15)” range (08a0d55). Thanks @mashabow

3.2.1 (released 2016-11-03)

• [OS/2] fix checking fsSelection bits matching head.macStyle bits

• [varLib] added --build-HVAR option to generate HVAR table for fonts with TrueType outlines. For CFF2, it is enabled by default.

3.2.0 (released 2016-11-02)

• [varLib] Improve support for OpenType 1.8 Variable Fonts:

• Implement GDEF’s VariationStore

• Implement HVAR/VVAR tables

• Partial support for loading MutatorMath .designspace files with varLib.designspace module

• Add varLib.models with Variation fonts interpolation models

• Implement GSUB/GPOS FeatureVariations

• Initial support for interpolating and merging OpenType Layout tables (see varLib.interpolate_layout and varLib.merger modules)

• [API change] Change version to be an integer instead of a float in XML output for GSUB, GPOS, GDEF, MATH, BASE, JSTF, HVAR, VVAR, feat, hhea and vhea tables. Scripts that set the Version for those to 1.0 or other float values also need fixing. A warning is emitted when code or XML needs fix.

• several bug fixes to the cffLib module, contributed by Adobe’s @readroberts

• The XML output for CFF table now has a ‘major’ and ‘minor’ elements for specifying whether it’s version 1.0 or 2.0 (support for CFF2 is coming soon)

• [setup.py] remove undocumented/deprecated extra_path Distutils argument. This means that we no longer create a “FontTools” subfolder in site-packages containing the actual fontTools package, as well as the standalone xmlWriter and sstruct modules. The latter modules are also deprecated, and scheduled for removal in upcoming releases. Please change your import statements to point to from fontTools.misc import xmlWriter and from fontTools.misc import sstruct.

• [scripts] Add a ‘fonttools’ command-line tool that simply runs fontTools.* sub-modules: e.g. fonttools ttx, fonttools subset, etc.

• [hmtx/vmts] Read advance width/heights as unsigned short (uint16); automatically round float values to integers.

• [ttLib/xmlWriter] add ‘newlinestr=None’ keyword argument to TTFont.saveXML for overriding os-specific line endings (passed on to XMLWriter instances).

• [versioning] Use versioneer instead of setuptools_scm to dynamically load version info from a git checkout at import time.

• [feaLib] Support backslash-prefixed glyph names.

3.1.2 (released 2016-09-27)

• restore Makefile as an alternative way to build/check/install

• README.md: update instructions for installing package from source, and for running test suite

• NEWS: Change log was out of sync with tagged release

3.1.1 (released 2016-09-27)

• Fix ttLibVersion attribute in TTX files still showing ‘3.0’ instead of ‘3.1’.

• Use setuptools_scm to manage package versions.

3.1.0 (released 2016-09-26)

• [feaLib] New library to parse and compile Adobe FDK OpenType Feature files.

• [mtiLib] New library to parse and compile Monotype ‘FontDame’ OpenType Layout Tables files.

• [voltLib] New library to parse Microsoft VOLT project files.

• [otlLib] New library to work with OpenType Layout tables.

• [varLib] New library to work with OpenType Font Variations.

• [pens] Add ttGlyphPen to draw to TrueType glyphs, and t2CharStringPen to draw to Type 2 Charstrings (CFF); add areaPen and perimeterPen.

• [ttLib.tables] Implement ‘meta’ and ‘trak’ tables.

• [ttx] Add –flavor option for compiling to ‘woff’ or ‘woff2’; add --with-zopfli option to use Zopfli to compress WOFF 1.0 fonts.

• [subset] Support subsetting ‘COLR’/’CPAL’ and ‘CBDT’/’CBLC’ color fonts tables, and ‘gvar’ table for variation fonts.

• [Snippets] Add symfont.py, for symbolic font statistics analysis; interpolatable.py, a preliminary script for detecting interpolation errors; {merge,dump}_woff_metadata.py.

• [classifyTools] Helpers to classify things into classes.

• [CI] Run tests on Windows, Linux and macOS using Appveyor and Travis CI; check unit test coverage with Coverage.py/Coveralls; automatic deployment to PyPI on tags.

• [loggingTools] Use Python built-in logging module to print messages.

• [py23] Make round() behave like Python 3 built-in round(); define round2() and round3().

3.0 (released 2015-09-01)

• Add Snippet scripts for cmap subtable format conversion, printing GSUB/GPOS features, building a GX font from two masters

• TTX WOFF2 support and a -f option to overwrite output file(s)

• Support GX tables: avar, gvar, fvar, meta

• Support feat and gzip-compressed SVG tables

• Upgrade Mac East Asian encodings to native implementation if available

• Add Roman Croatian and Romanian encodings, codecs for mac-extended East Asian encodings

• Implement optimal GLYF glyph outline packing; disabled by default

2.5 (released 2014-09-24)

• Add a Qt pen

• Add VDMX table converter

• Load all OpenType sub-structures lazily

• Add support for cmap format 13.

• Add pyftmerge tool

• Update to Unicode 6.3.0d3

• Add pyftinspect tool

• Add support for Google CBLC/CBDT color bitmaps, standard EBLC/EBDT embedded bitmaps, and SVG table (thanks to Read Roberts at Adobe)

• Add support for loading, saving and ttx’ing WOFF file format

• Add support for Microsoft COLR/CPAL layered color glyphs

• Support PyPy

• Support Jython, by replacing numpy with array/lists modules and removed it, pure-Python StringIO, not cStringIO

• Add pyftsubset and Subsetter object, supporting CFF and TTF

• Add to ttx args for -q for quiet mode, -z to choose a bitmap dump format

2.4 (released 2013-06-22)

• Option to write to arbitrary files

• Better dump format for DSIG

• Better detection of OTF XML

• Fix issue with Apple’s kern table format

• Fix mangling of TT glyph programs

• Fix issues related to mona.ttf

• Fix Windows Installer instructions

• Fix some modern MacOS issues

• Fix minor issues and typos

2.3 (released 2009-11-08)

• TrueType Collection (TTC) support

• Python 2.6 support

• Update Unicode data to 5.2.0

• Couple of bug fixes

2.2 (released 2008-05-18)

• ClearType support

• cmap format 1 support

• PFA font support

• Switched from Numeric to numpy

• Update Unicode data to 5.1.0

• Update AGLFN data to 1.6

• Many bug fixes

2.1 (released 2008-01-28)

• Many years worth of fixes and features

2.0b2 (released 2002-??-??)

• Be “forgiving” when interpreting the maxp table version field: interpret any value as 1.0 if it’s not 0.5. Fixes dumping of these GPL fonts: http://www.freebsd.org/cgi/pds.cgi?ports/chinese/wangttf

• Fixed ttx -l: it turned out this part of the code didn’t work with Python 2.2.1 and earlier. My bad to do most of my testing with a different version than I shipped TTX with :-(

• Fixed bug in ClassDef format 1 subtable (Andreas Seidel bumped into this one).

2.0b1 (released 2002-09-10)

• Fixed embarrassing bug: the master checksum in the head table is now calculated correctly even on little-endian platforms (such as Intel).

• Made the cmap format 4 compiler smarter: the binary data it creates is now more or less as compact as possible. TTX now makes more compact data than in any shipping font I’ve tested it with.

• Dump glyph names as a separate “GlyphOrder” pseudo table as opposed to as part of the glyf table (obviously needed for CFF-OTF’s).

• Added proper support for the CFF table.

• Don’t barf on empty tables (questionable, but “there are font out there…”)

• When writing TT glyf data, align glyphs on 4-byte boundaries. This seems to be the current recommendation by MS. Also: don’t barf on fonts which are already 4-byte aligned.

• Windows installer contributed bu Adam Twardoch! Yay!

• Changed the command line interface again, now by creating one new tool replacing the old ones: ttx It dumps and compiles, depending on input file types. The options have changed somewhat.

• The -d option is back (output dir)

• ttcompile’s -i options is now called -m (as in “merge”), to avoid clash with dump’s -i.

• The -s option (“split tables”) no longer creates a directory, but instead outputs a small .ttx file containing references to the individual table files. This is not a true link, it’s a simple file name, and the referenced file should be in the same directory so ttcompile can find them.

• compile no longer accepts a directory as input argument. Instead it can parse the new “mini-ttx” format as output by “ttx -s”.

• all arguments are input files

• Renamed the command line programs and moved them to the Tools subdirectory. They are now installed by the setup.py install script.

• Added OpenType support. BASE, GDEF, GPOS, GSUB and JSTF are (almost) fully supported. The XML output is not yet final, as I’m still considering to output certain subtables in a more human-friendly manner.

• Fixed ‘kern’ table to correctly accept subtables it doesn’t know about, as well as interpreting Apple’s definition of the ‘kern’ table headers correctly.

• Fixed bug where glyphnames were not calculated from ‘cmap’ if it was (one of the) first tables to be decompiled. More specifically: it cmap was the first to ask for a glyphID -> glyphName mapping.

• Switched XML parsers: use expat instead of xmlproc. Should be faster.

• Removed my UnicodeString object: I now require Python 2.0 or up, which has unicode support built in.

• Removed assert in glyf table: redundant data at the end of the table is now ignored instead of raising an error. Should become a warning.

• Fixed bug in hmtx/vmtx code that only occured if all advances were equal.

• Fixed subtle bug in TT instruction disassembler.

• Couple of fixes to the ‘post’ table.

• Updated OS/2 table to latest spec.

1.0b1 (released 2001-08-10)

• Reorganized the command line interface for ttDump.py and ttCompile.py, they now behave more like “normal” command line tool, in that they accept multiple input files for batch processing.

• ttDump.py and ttCompile.py don’t silently override files anymore, but ask before doing so. Can be overridden by -f.

• Added -d option to both ttDump.py and ttCompile.py.

• Installation is now done with distutils. (Needs work for environments without compilers.)

• Updated installation instructions.

• Added some workarounds so as to handle certain buggy fonts more gracefully.

• Updated Unicode table to Unicode 3.0 (Thanks Antoine!)

• Included a Python script by Adam Twardoch that adds some useful stuff to the Windows registry.

• Moved the project to SourceForge.

1.0a6 (released 2000-03-15)

• Big reorganization: made ttLib a subpackage of the new fontTools package, changed several module names. Called the entire suite “FontTools”

• Added several submodules to fontTools, some new, some older.

• Added experimental CFF/GPOS/GSUB support to ttLib, read-only (but XML dumping of GPOS/GSUB is for now disabled)

• Fixed hdmx endian bug

• Added -b option to ttCompile.py, it disables recalculation of bounding boxes, as requested by Werner Lemberg.

• Renamed tt2xml.pt to ttDump.py and xml2tt.py to ttCompile.py

• Use “.ttx” as file extension instead of “.xml”.

• TTX is now the name of the XML-based format for TT fonts, and not just an application.

1.0a5

Never released

• More tables supported: hdmx, vhea, vmtx

1.0a3 & 1.0a4

Never released

• fixed most portability issues

• retracted the “Euro_or_currency” change from 1.0a2: it was nonsense!

1.0a2 (released 1999-05-02)

• binary release for MacOS

• genenates full FOND resources: including width table, PS font name info and kern table if applicable.

• added cmap format 4 support. Extra: dumps Unicode char names as XML comments!

• added cmap format 6 support

• now accepts true type files starting with “true” (instead of just 0x00010000 and “OTTO”)

• ‘glyf’ table support is now complete: I added support for composite scale, xy-scale and two-by-two for the ‘glyf’ table. For now, component offset scale behaviour defaults to Apple-style. This only affects the (re)calculation of the glyph bounding box.

• changed “Euro” to “Euro_or_currency” in the Standard Apple Glyph order list, since we cannot tell from the ‘post’ table which is meant. I should probably doublecheck with a Unicode encoding if available. (This does not affect the output!)

Fixed bugs: - ‘hhea’ table is now recalculated correctly - fixed wrong assumption about sfnt resource names

1.0a1 (released 1999-04-27)

• initial binary release for MacOS