`gf.rejuice` provides additional tools for developers to use `Juicer` for the compression of Javascript and CSS resources, in the context of python web applications that run via WSGI.
Project description
gf.rejuice
`gf.rejuice` provides additional tools for developers to use `Juicer` for the compression of Javascript and CSS resources, in the context of python web applications that run via WSGI.
Q: Is this for me, shall I use it?
A: If you develop javascript with some python based (WSGI) application, and you already use Juicer, or consider using some method for compressing your resources, then you may find gf.rejuice useful.
This is a package under active development.
Q: Is is safe to use it?
A1: No. Although it is well tested, it may contain bugs, or may not support your use case. Things can also change substantially, in a following version.
A2: Yes, it is safe, because you actually only use it for development. It is not even installed on the production website. So, the risk is minimal.
Objectives
gf.rejuice attempts to provide additional tools for developers to use Juicer in the context of python web applications that run via WSGI.
Juicer is a CSS and JavaScript packaging tool, that provides a method to compress (minify) and concatenate the resources for a website or a software package. (Juicer supports the widely used and stable YUI Compressor.) This compression happens manually, offline. Then, if this resource is used in a website page, the page can use the compressed resources directly.
It is, however, very difficult or close to impossible to debug and develop websites with fully compressed resources. As a developer, my every day work routine needs an easy way to switch to a “development mode”, where I am able to access the original set of uncompressed, undeveloped resources.
One possible solution for this would be to provide two sets of resources from the website pages: one for production that contains the compressed resources, and one for development. This can be achieved in several ways, for example, by providing two sets of resources from the html headers conditionally, or use some kind of registry that supports a Development / Production mode switch. The problem with these approaches is that they almost always require changes in the software and possibly extra administration, redundancy, which can be especially painful if the project has many resources.
As an alternate solution, to avoid a dual set of resources, some tool can be used that supports the compression and minification of the original sources on the fly. This however has the disadvantage that due to the fact that even the most robust compression methods are prone to errors, it is more difficult to verify the validity of the produced resources, than in offline mode.
gf.rejuice attempts to provide a simple way to aid this process. In comparision with existing tools, that support the compression and minification of the original sources on the fly, gf.rejuice supports a workflow the other way around. It takes the minified resources as the reference, and provides access to the uncompressed resources for development.
It does this by providing a way to transparently switch a site that contains and refers the compressed (minified) resources only, into development mode. It does this without the need to change the original software and templates. In addition, it also provides a way to automate the process of compressing or recompressing the resources for production, in case this becomes necessary due to some changes that have been made to the sources.
License
gf.rejuice is dual-licensed by the GPLv2 and BSD licenses. You have to choose any one or both of these licenses for the redistribution of this software.
gf.rejuice does not contain or redistribute Juicer itself, Juicer still needs to be installed separately, but even this is not necessary for each use case.
Installation
You need to install the gf.rejuice package to be importable from your project. If you use buildout, this can be done by adding gf.rejuice to your egg section:
eggs =
....
gf.rejuice
In addition, you need to configure a paster.ini file that you will use for development.
To use the current newest development version, you can download the package from its source repository and install it package manually. Alternately, you can use a recipe like gf.recipe.bzr or similar from your buildout to install the software directly from the source repository:
[src]
recipe = gf.recipe.bzr
urls =
bzr+ssh://gfpublic@greenfinity.hu/home/gfpublic/gf.rejuice/trunk gf.rejuice
(To use gf.recipe.bzr, you need to have Bazaar installed on your computer.)
Simple configuration
To configure gf.rejuice, you need to provide a development configuration for paster. This can be done by copying your original ini file to a second ini file. Then, add the necessary configuration to the development (second) ini.
For example, your application had a paster configuration file myapp.ini, and you create a second myapp-devel.ini from it.
Following this, you can use paster with the original, unchanged ini file myapp.ini to run the application in production mode, and the myapp-devel.ini file will be used to run the application in development mode.
The following describes the parts to be added to myapp-devel.ini to produce a simple working configuration:
[filter:rejuice]
use = egg:gf.rejuice#develjuice
url_prefix = /static
filepath = egg:my.package/views/static
# Resource composition:
default.min.js = default.js
min/default.min.css = custom/default.css
[pipeline:main]
pipeline =
...
rejuice
main_app
The WSGI filter section
In the above example, the [filter:rejuice] section defines the wsgi middleware that does the transformation from production resource urls produced by the the main_app, to the corresponding development resource urls. Which application is generating the page to be transformed, or in which particular method this happens, is ambivalent for this process.
The url_prefix and filepath parameters are needed to specify where the resources reside, following that a resource list specifies what resources the WSGI filter should consider.
url_prefix, filepath: specifying the static tree of resources
The url_prefix and filepath parameters must always stand together with the actual list of resources. Together they specify a static tree in your application.
url_prefix specify the prefix of the url where the root of this static tree appears in the application’s url space. The setting:
url_prefix = /static
specifies that the http://127.0.0.1:6543/static url is the root of the static tree that your application publishes.
filepath specifies where the same static tree can be found in the filesystem:
filepath = views/static
In this example, the path is constructed relatively to the directory of the myapp-devel.ini configuration file that holds the declaration.
Note that the gf.rejuice middleware does not actually publish this static tree, it still is the responsibility of your application. The parameters are needed for url rewrite.
Specifying resource composition
With the rest of the section content, you can specify a list of javascript or css resources here. Anything ending with .js or .css will be considered to be a resource:
default.min.js = default.js min/default.min.css = custom/default.css
Each line contains two values here. The value on the left of the equal sign specifies the compressed, minified resource (the result of compression). The right value specified the original, uncompressed source (the origin of compression). All file paths are applied relatively from the root of the static tree, specified by url_prefix and filepath.
Later we will see that it is also possible to produce one resource from a list of resources, which, in that case will be compressed and concatenated to a single resource. The configuration allows a list of resources in multiple lines:
default.min.js =
dependency.js
...
default.js
Result of the configuration
Let’s assume that you have the following resources specified from the head section of your html page:
<script src="http://127.0.0.1:6543/static/default.min.js" type="text/javascript"></script> <link href="http://127.0.0.1:6543/static/min/default.min.css" type="text/css" rel="stylesheet">
The middleware will transform this to a website that loads the original sources:
<script src="http://127.0.0.1:6543/static/default.js" type="text/javascript"></script> <link href="http://127.0.0.1:6543/static/custom/default.css" type="text/css" rel="stylesheet">
Juicer also allows to specify dependencies for the resources. The dependent resources may also contain further dependencies. For further explanation, please read the documentation of juicer.
default.js:
/* @depends a/source_a.js @depends b/source_b.js */
custom/default.css:
@import ../a/style_a.css @import ../b/style_b.css
The middleware will add the dependent javascript resources to the html headers. For css this is not needed, as @import describes the inclusion dependencies in a native way for the browser. The end result will be a html that contains the full set of original resources:
<script src="http://127.0.0.1:6543/static/a/source_a.js" type="text/javascript"></script> <script src="http://127.0.0.1:6543/static/b/source_b.js" type="text/javascript"></script> <script src="http://127.0.0.1:6543/static/default.js" type="text/javascript"></script> <link href="http://127.0.0.1:6543/static/custom/default.css" type="text/css" rel="stylesheet">
For more complex examples on how to specify dependencies for juicer, you can look at the sources of the Bottlecap UI, that provides the dependencies to compress the jquery-ui framework.
Two ways to produce the same result
Rather than specifying the dependencies in the style of Juicer, by using @import for css and @depends for js, the same results can be achieved directly from the configuration as well:
default.min.js =
a/source_a.js
b/source_b.js
default.js
min/default.min.css =
a/style_a.css
b/style_b.css
custom/default.css
This configuration could replace and is equivalent with the usage of @import and @depends in the above example.
Which one of the two ways are better to use, depends on use case and personal taste.
Compression
Although it is quite easy to use Juicer directly from the command line to produce the compressed resources, gf.rejuice provides an automation for this.
To use Juicer, you must have Juicer and its dependencies already installed. The documentation of Juicer describes this simple process. This installation (including java and ruby) does not need to be present for the middleware to work, only for carrying out the actual compression.
If you use buildout, you can enter the following from the command line:
bin/rejuice paster_devel.ini filter:rejuice
With the example ini file described earlier, this will produce or reproduce both default.min.js and default.min.css from their original sources. filter:rejuice here refers to the juicer definition section from the ini file. Any extensions referred from this section are also processed.
An extension section can also be specified directly:
bin/rejuice another_config_file.ini juice_resources
If you do not use buildout, you can also run the rejuice_script.py file directly:
python path/to/package/gf/rejuice/rejuice_script.py paster_devel.ini juice_resources
Advanced configuration
In this section we explain the usage of all parameters. They belong to two groups: the first group specifies which urls the middleware should consider for transformation at all, the second group gives control over selecting the resources that should be considered, by specifying a static tree and by specifying the resource composition itself.
Affecting which urls the middleware should consider
The task of the middleware is to transform only resources that are on the same server as where the page is. So it needs to decide which resources are local and which not.
By default, the middleware considers those resources as local, whose domain matches the domain of the currently served page. To do this, nothing needs to be specified.
For example, if your application is served from this url:
http://127.0.0.1:6543/
Then the following resources will be considered local, if they appear in the page header:
http://127.0.0.1:6543/default.js http://127.0.0.1:6543/static/default.css /any/absolute/path/my.js any/relative/path/my.css
But the following resources will be considered remote, and thus ignored:
http://github.com/jquery/qunit/raw/master/qunit/qunit.js http://ajax.googleapis.com/ajax/libs/jqueryui/1.8.2/themes/smoothness/jquery-ui.css http://localhost:6543/static/default.css
This is adequate for most web applications, that generate resource names in a way that they use the base domain of the currently served page. If this is not a case (note that localhost would not be accepted as local if the page is served on 127.0.0.1), or the use case needs finer control, there are two parameters that make this possible.
base_urls: specifying the url host to consider
The base_urls parameter specifies the domain and prefix url for the static tree, in which both the production and development resources must be available and accessible from the web. Only the resources that match this url, will be transformed.
It is also possible to specify a list of urls for this, in which case any of the urls will be considered for matching:
base_urls =
http://127.0.0.1:6543/
http://localhost:6543/
http://foo.bar/
One specific case when this is needed, if the local resources may have a different domain than the base url of the page in which they are referred from. In this case you simply list all the possible urls you may want to use during development. Specifying more does not do any harm, besides making the designated resources local.
allow_request_url: disabling to consider the url host of the current request
allow_request_url is by default True, meaning that both the domains from base_urls and the domain of the current request url designate the locality of resources.
It is possible to specify allow_request_url as False, in which case, the use of the request url is prohibited, and only the declaration base_urls will be considered.
This would be useful, if your portal is not at the root of domain, for example, it is served from the following root url:
http://127.0.0.1:6543/myportal/...
In this case you would use the following specification, which will cause url_prefix to be applied after the prefix you specify from base_urls:
allow_request_url = false
base_urls =
http://127.0.0.1:6543/myportal
http://localhost:6543/myportal
http://foo.bar/myportal
Specifying allow_request_url = false, without also specifying base_urls to a sensible value, does not make sense, although it will not yield an error. The middleware will simply do nothing, not being able to identify any url as local.
Specifying the static tree containing the resources
Each resource that gf.rejuice handles is part of a static tree. Both the development, and the production resources are in some static tree. This tree resides somewhere on the filesystem, and the application also publishes this tree somewhere in its url space. The following parameters make it possible to define this tree. Both url_prefix and filepath need to be defined together.
url_prefix: specifying the url prefix of the static tree root
The url_prefix parameter is an url path segment that defines where the tree root is located in the application’s url space:
url_prefix = /static
The above example defines that the static tree url is:
http://127.0.0.1:6543/static
The / in the beginning (or end) of the prefix is optional, that is, the following parameters have an equivalent meaning:
url_prefix = /static/path
url_prefix = static/path
url_prefix = /static/path/
filepath: specifying the static tree root in the filesystem
The application uses the`filepath` parameter to locate the static tree on the filesystem. This must be the same static tree that is published under the url_prefix parameter described earlier:
filepath = views/static
If the path is a relative path, (does not starts with a /), then the path will be interpreted relatively from the ini file that holds the declaration.
It is also possible to use an absolute file path:
filepath = /Path/To/my/static/tree
It is also possible to specify a file path relative from a python egg:
filepath = egg:my.package/views/static
The above declaration will locate the import location of the my.package egg, and locate the tree from there, using the path section that follows the egg’s name.
The parameters url_prefix and filepath need to be defined together.
Specifying and extending the composition of resources
gf.rejuice provides a simple and flexible way to define how the production (compressed) resources are produced from the development resources (the original sources).
Specifying the composition of resources
A list of javascript or css resources can be specified from the configuration file. Anything ending with .js or .css will be considered to be a resource:
default.min.js = default.js min/default.min.css = custom/default.css
Each line contains two values here. The value on the left of the equal sign specifies the path of the compressed, minified resource (the result of compression). The right value specifies the path of original, uncompressed source (the origin of compression).
All file paths are applied relatively from the root of the static tree, specified by url_prefix and filepath.
Derive a resource from a list of resources
It is also possible to produce one resource from a list of resources, which, in that case will be compressed and concatenated to a single resource. The configuration allows a list of resources in multiple lines:
default.min.js =
dependency.js
dependency2.js
default.js
min/default.min.css =
a/css1.css
b/css2.css
custom/default.css
Juicer’s scheme for specifying resource dependencies from inside the resources (by using @import from css files and @depends from commented parts of javascript files) is also taken into consideration. But if such dependencies are specified from the resources themselves, then they do not need to be (should not be) listed from the configuration section as well.
extend_resources: adding more static trees to the configuration
For more flexibility, it is possible to define the resource composition from a separate configuration file section. In this case the filter section will refer to this section with the extend_resources parameter:
[filter:rejuice] use = egg:gf.rejuice#develjuice base_urls = http://127.0.0.1:6543/static extend_resources = juice_resources [juice_resources] url_prefix = /static filepath = views/static # Resource composition: default.min.js = default.js min/default.min.css = custom/default.css
The extend_resources option selects a section in the ini file, that configures the actual resources to be considered for the transformation.
Instead of a single section, a list of sections can also be specified:
extend_resources =
juice_resources_1
juice_resources_2
Extending resources from another configuration file
Following the same syntax that PasteDeploy uses for extending its configuration, it is also possible to extend the resources from a section residing in an arbitrary .ini file:
extend_resources = config:another_config_file.ini#juice_resources
This makes it possible to separate the resource configuration for gf.rejuice into a separate file.
In the file my-devel.ini the following could be entered:
[filter:rejuice] use = egg:gf.rejuice#develjuice base_urls = http://127.0.0.1:6543/static extend_resources = config:another_config_file.ini#juice_resources
While the referred file another_config_file.ini could look like this:
[juice_resources] url_prefix = /static filepath = egg:my.package/views/static # Resource composition: default.min.js = default.js min/default.min.css = custom/default.css
The config: prefix makes it possible to refer a configuration file relatively from the location of the current configuration file:
extend_resources = config:another_config_file.ini#juice_resources
Alternately, an absolute file path can be used as well:
extend_resources = config:/Path/To/my/place/another_config_file.ini#juice_resources
Finally, the configuration file can be selected relative from a python egg import:
extend_resources = egg:my.package/path/to/another_config_file.ini#juice_resources
Instead of a single extension section, a list of extension sections can also be specified:
extend_resources =
base_resources
more_resources
egg:my.package/path/to/another_config_file.ini#juice_resources_1
egg:my.package/path/to/another_config_file.ini#juice_resources_2
Putting the resource declarations to a separate file makes it easier to manage them. The configuration file behaves just as expected from python configfiles or Paster configuration files. The [DEFAULT] section can specify a default value for the url_prefix and the filepath parameters, which then each section in the same file inherits, or can overwrite:
[DEFAULT] url_prefix = /static filepath = egg:my.package/views/static [juice_resources_1] default.min.js = default.js min/default.min.css = custom/default.css [juice_resources_2] some_other.min.js = some_other.js ... [juice_resources_3] url_prefix = /static2 filepath = egg:another.package/views/static different.min.js = different.js ...
It is also possible, just as in every python config file, to use %(varname) style interpolation anywhere inside the declarations. %(here) containing the full path of the current ini file, as well as %(__name__) containing the name of the current section, are also available, just as usual in the Paster configuration files.
Importing resources from another static tree
It is an important need to construct resources from another static tree than the one the final resource will be located in. Important use cases are: reusing the concatenation scheme of a resource defined elsewhere, or, making a site resource out of resources produced by separate javascript checkouts, or python eggs.
A resource originating from another section can be specified by providing the section name, following the resource path by one or more spaces:
default.min.js = default.js othersection
In a more realistic example, the resource would typically be produced from a list of resources from separate sections:
[main]
url_prefix = /static
filepath = egg:my.site/views/static
default.min.js =
jquery-1.4.4.min.js jquery_section
jquery-ui-1.8.min.js jquery-ui_section
default.js
extend_resources =
jquery_section
jquery-ui_section
[jquery-section]
url_prefix = /static-jquery
filepath = egg:my.jquery/static
[jquery-ui_section]
url_prefix = /static-jquery-ui
filepath = egg:my.jqueryui/static
Note that all the sections used as an import source, must also be listed in the extend_resource parameter. Failing to do so, will result in an error message.
As seen from the above example, the resources imported from another section (jquery-1.4.4.min.js, and jquery-ui-1.8.min.js in this case) need not be specified as resources in that section. They just need to be present in the source tree.
If however the imported resources are not themselves compressed, they will be. Also, if they contain further dependencies specified by @import or @depends, these dependencies will properly be included in the resulting resource.
If the referenced sections contain further resource concatenation rules, they will be processed as well:
[main]
url_prefix = /static
filepath = egg:my.site/views/static
default.min.js =
jquery-1.4.4.min.js jquery_section
jquery-ui-1.8.min.js jquery-ui_section
default.js
extend_resources =
jquery_section
jquery-ui_section
[jquery-section]
url_prefix = /static-jquery
filepath = egg:my.jquery/static
jquery-1.4.4.min.js = jquery.1.4.4.js
[jquery-ui_section]
url_prefix = /static-jquery-ui
filepath = egg:my.jqueryui/static
jquery-ui-1.8.min.js =
ui/jquery.ui.core.js
ui/jquery.ui.widget.js
ui/jquery.ui.mouse.js
...
ui/jquery.effects.transfer.js
What will result from this configuration, that the middleware will explode every single resource to its development resources, recursively. Also, running bin/rejuice myconfig.ini main will produce all resources specified in all sections, providing a complete update based on the original sources.
To make the example even more realistic, let us suppose that each static tree has a standalone configuration as well, which are referred from the configuration of the site.
site.ini:
[main]
url_prefix = /static
filepath = views/static
default.min.js =
jquery-1.4.4.min.js egg:my.jquery/juicer.ini#jquery_section
jquery-ui-1.8.min.js egg:my.jqueryui/juicer.ini#jquery-ui_section
default.js
extend_resources =
egg:my.jquery/juicer.ini#jquery_section
egg:my.jqueryui/juicer.ini#jquery-ui_section
juicer.ini in my.jquery egg:
[jquery-section] url_prefix = /static-jquery filepath = views/static jquery-1.4.4.min.js = jquery.1.4.4.js
juicer.ini in my.jqueryui egg:
[jquery-ui_section]
url_prefix = /static-jquery-ui
filepath = views/static
jquery-ui-1.8.min.js =
ui/jquery.ui.core.js
ui/jquery.ui.widget.js
ui/jquery.ui.mouse.js
...
ui/jquery.effects.transfer.js
Localizing images for imported css resources
A valuable feature of gf.rejuice is the support of concatenation a single css resource from foreign css resources, that is normally not supported by Juicer and hard to be achieved by Juicer alone.
Css resources contain url(…) directives to refer to other resources, typically images. While Juicer takes care of rewriting the urls in these directives, so that the original resources can be located from the compressed css, the scheme will stop working as soon as a css file is composed from many different source trees or eggs.
To support this use case, gf.rejuice copies all images referenced in the compressed css file, that reside in different source trees. This only happens if a css image compresses from any resource from a section which has a different filepath than the target section.
For example, in case of a following configuration:
[main]
url_prefix = /static
filepath = egg:my.package/views/static
default.min.css =
other_package.css other_section
default.css
extend_resources = other_section
[other_section]
url_prefix = /other-static
filepath = egg:other.package/static
if we run bin/rejuice myconfig.ini main, the result will be a default.min.css file, and a default.min.css.images directory, created in the same directory next to each other. The default.min.css.images directory will contain a copy of all the resources that default.min.css references.
As a consequence of this, any other sections than the main section, are only needed for development mode while the middleware resolves urls to the original sources, and for the time when the compression is done by running bin/rejuice. Following that, the other trees can be brought to offline as they are not needed to be present in the production website at all, that operates solely on the compressed resources.
This makes it possible to establish a development scheme, when the production websites contains the compressed resources only, and the library dependencies, present in checked-out static trees or development eggs, are only present during the time of development.
Example use cases
XXX
Changelog for gf.rejuice
0.2 (2011-03-08)
Fix a bug in the resolver lists that prevented to resolve from any other resolver then the first one in the list [ree]
Small refactoring, fix docs [ree]
0.1 (2011-03-04)
Initial release [ree]
Release history Release notifications | RSS feed
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
Source Distribution
File details
Details for the file gf.rejuice-0.2.tar.gz.
File metadata
- Download URL: gf.rejuice-0.2.tar.gz
- Upload date:
- Size: 32.2 kB
- Tags: Source
- Uploaded using Trusted Publishing? No
File hashes
| Algorithm | Hash digest | |
|---|---|---|
| SHA256 | 84ea5957504e6bec151f62b7c1653e550c2652a6411b2f42dab88ac3e7fb7bd7 |
|
| MD5 | 8aefad28d56521b0c237df17a2d4892a |
|
| BLAKE2b-256 | c4bec4550971c77017d8286a688cf789b92c20bfa3e8fbc67fa65d8c97e295be |
