git-multimail 1.2.0

Requirements

• Python 2.x, version 2.4 or later. No non-standard Python modules are required. git-multimail has preliminary support for Python 3 (but it has been better tested with Python 2).

• The git command must be in your PATH. git-multimail is known to work with Git versions back to 1.7.1. (Earlier versions have not been tested; if you do so, please report your results.)

• To send emails using the default configuration, a standard sendmail program must be located at ‘/usr/sbin/sendmail’ or ‘/usr/lib/sendmail’ and must be configured correctly to send emails. If this is not the case, set multimailhook.sendmailCommand, or see the multimailhook.mailer configuration variable below for how to configure git-multimail to send emails via an SMTP server.

Invocation

git_multimail.py is designed to be used as a post-receive hook in a Git repository (see githooks(5)). Link or copy it to $GIT_DIR/hooks/post-receive within the repository for which email notifications are desired. Usually it should be installed on the central repository for a project, to which all commits are eventually pushed.

For use on pre-v1.5.1 Git servers, git_multimail.py can also work as an update hook, taking its arguments on the command line. To use this script in this manner, link or copy it to $GIT_DIR/hooks/update. Please note that the script is not completely reliable in this mode [2].

Alternatively, git_multimail.py can be imported as a Python module into your own Python post-receive script. This method is a bit more work, but allows the behavior of the hook to be customized using arbitrary Python code. For example, you can use a custom environment (perhaps inheriting from GenericEnvironment or GitoliteEnvironment) to

• change how the user who did the push is determined

• read users’ email addresses from an LDAP server or from a database

• decide which users should be notified about which commits based on the contents of the commits (e.g., for users who want to be notified only about changes affecting particular files or subdirectories)

Or you can change how emails are sent by writing your own Mailer class. The post-receive script in this directory demonstrates how to use git_multimail.py as a Python module. (If you make interesting changes of this type, please consider sharing them with the community.)

Configuration

By default, git-multimail mostly takes its configuration from the following git config settings:

multimailhook.environment

This describes the general environment of the repository. In most cases, you do not need to specify a value for this variable: git-multimail will autodetect which environment to use. Currently supported values:

• generic

  the username of the pusher is read from $USER or $USERNAME and the repository name is derived from the repository’s path.

• gitolite

  the username of the pusher is read from $GL_USER, the repository name is read from $GL_REPO, and the From: header value is optionally read from gitolite.conf (see multimailhook.from).

  For more information about gitolite and git-multimail, read doc/gitolite.rst

• stash

  Environment to use when git-multimail is ran as an Atlassian BitBucket Server (formerly known as Atlassian Stash) hook.

  Warning: this mode was provided by a third-party contributor and never tested by the git-multimail maintainers. It is provided as-is and may or may not work for you.

  This value is automatically assumed when the stash-specific flags (--stash-user and --stash-repo) are specified on the command line. When this environment is active, the username and repo come from these two command line flags, which must be specified.

• gerrit

  Environment to use when git-multimail is ran as a ref-updated Gerrit hook.

  This value is used when the gerrit-specific command line flags (--oldrev, --newrev, --refname, --project) for gerrit’s ref-updated hook are present. When this environment is active, the username of the pusher is taken from the --submitter argument if that command line option is passed, otherwise ‘Gerrit’ is used. The repository name is taken from the --project option on the command line, which must be passed.

  For more information about gerrit and git-multimail, read doc/gerrit.rst

If none of these environments is suitable for your setup, then you can implement a Python class that inherits from Environment and instantiate it via a script that looks like the example post-receive script.

The environment value can be specified on the command line using the --environment option. If it is not specified on the command line or by multimailhook.environment, the value is guessed as follows:

• If stash-specific (respectively gerrit-specific) command flags are present on the command-line, then stash (respectively gerrit) is used.

• If the environment variables $GL_USER and $GL_REPO are set, then gitolite is used.

• If none of the above apply, then generic is used.

multimailhook.repoName

A short name of this Git repository, to be used in various places in the notification email text. The default is to use $GL_REPO for gitolite repositories, or otherwise to derive this value from the repository path name.

multimailhook.mailingList

The list of email addresses to which notification emails should be sent, as RFC 2822 email addresses separated by commas. This configuration option can be multivalued. Leave it unset or set it to the empty string to not send emails by default. The next few settings can be used to configure specific address lists for specific types of notification email.

multimailhook.refchangeList

The list of email addresses to which summary emails about reference changes should be sent, as RFC 2822 email addresses separated by commas. This configuration option can be multivalued. The default is the value in multimailhook.mailingList. Set this value to “none” (or the empty string) to prevent reference change emails from being sent even if multimailhook.mailingList is set.

multimailhook.announceList

The list of email addresses to which emails about new annotated tags should be sent, as RFC 2822 email addresses separated by commas. This configuration option can be multivalued. The default is the value in multimailhook.refchangeList or multimailhook.mailingList. Set this value to “none” (or the empty string) to prevent annotated tag announcement emails from being sent even if one of the other values is set.

multimailhook.commitList

The list of email addresses to which emails about individual new commits should be sent, as RFC 2822 email addresses separated by commas. This configuration option can be multivalued. The default is the value in multimailhook.mailingList. Set this value to “none” (or the empty string) to prevent notification emails about individual commits from being sent even if multimailhook.mailingList is set.

multimailhook.announceShortlog

If this option is set to true, then emails about changes to annotated tags include a shortlog of changes since the previous tag. This can be useful if the annotated tags represent releases; then the shortlog will be a kind of rough summary of what has happened since the last release. But if your tagging policy is not so straightforward, then the shortlog might be confusing rather than useful. Default is false.

multimailhook.commitEmailFormat

The format of email messages for the individual commits, can be “text” or “html”. In the latter case, the emails will include diffs using colorized HTML instead of plain text used by default. Note that this currently the ref change emails are always sent in plain text.

Note that when using “html”, the formatting is done by parsing the output of git log with -p. When using multimailhook.commitLogOpts to specify a --format for git log, one may get false positive (e.g. lines in the body of the message starting with +++ or --- colored in red or green).

multimailhook.refchangeShowGraph

If this option is set to true, then summary emails about reference changes will additionally include:

• a graph of the added commits (if any)

• a graph of the discarded commits (if any)

The log is generated by running git log --graph with the options specified in graphOpts. The default is false.

multimailhook.refchangeShowLog

If this option is set to true, then summary emails about reference changes will include a detailed log of the added commits in addition to the one line summary. The log is generated by running git log with the options specified in multimailhook.logOpts. Default is false.

multimailhook.mailer

This option changes the way emails are sent. Accepted values are:

• sendmail (the default): use the command /usr/sbin/sendmail or /usr/lib/sendmail (or sendmailCommand, if configured). This mode can be further customized via the following options:

  • multimailhook.sendmailCommand

    The command used by mailer sendmail to send emails. Shell quoting is allowed in the value of this setting, but remember that Git requires double-quotes to be escaped; e.g.:

    git config multimailhook.sendmailcommand '/usr/sbin/sendmail -oi -t -F \"Git Repo\"'

    Default is ‘/usr/sbin/sendmail -oi -t’ or ‘/usr/lib/sendmail -oi -t’ (depending on which file is present and executable).

  • multimailhook.envelopeSender

    If set then pass this value to sendmail via the -f option to set the envelope sender address.

• smtp: use Python’s smtplib. This is useful when the sendmail command is not available on the system. This mode can be further customized via the following options:

  • multimailhook.smtpServer

    The name of the SMTP server to connect to. The value can also include a colon and a port number; e.g., mail.example.com:25. Default is ‘localhost’ using port 25.

  • multimailhook.smtpUser

  • multimailhook.smtpPass

    Server username and password. Required if smtpEncryption is ‘ssl’. Note that the username and password currently need to be set cleartext in the configuration file, which is not recommended. If you need to use this option, be sure your configuration file is read-only.

  • multimailhook.envelopeSender

    The sender address to be passed to the SMTP server. If unset, then the value of multimailhook.from is used.

  • multimailhook.smtpServerTimeout

    Timeout in seconds.

  • multimailhook.smtpEncryption

    Set the security type. Allowed values: none, ssl, tls. Default=none.

  • multimailhook.smtpServerDebugLevel

    Integer number. Set to greater than 0 to activate debugging.

multimailhook.from multimailhook.fromCommit multimailhook.fromRefchange

If set, use this value in the From: field of generated emails. fromCommit is used for commit emails, fromRefchange is used for refchange emails, and from is used as fall-back in all cases.

The value for these variables can be either:

• An email address, which will be used directly.

• The value pusher, in which case the pusher’s address (if available) will be used.

• The value author (meaningful only for replyToCommit), in which case the commit author’s address will be used.

If config values are unset, the value of the From: header is determined as follows:

1. (gitolite environment only) Parse gitolite.conf, looking for a block of comments that looks like this:

   # BEGIN USER EMAILS
   # username Firstname Lastname <email@example.com>
   # END USER EMAILS

   If that block exists, and there is a line between the BEGIN USER EMAILS and END USER EMAILS lines where the first field matches the gitolite username ($GL_USER), use the rest of the line for the From: header.

2. If the user.email configuration setting is set, use its value (and the value of user.name, if set).

3. Use the value of multimailhook.envelopeSender.

multimailhook.administrator

The name and/or email address of the administrator of the Git repository; used in FOOTER_TEMPLATE. Default is multimailhook.envelopesender if it is set; otherwise a generic string is used.

multimailhook.emailPrefix

All emails have this string prepended to their subjects, to aid email filtering (though filtering based on the X-Git-* email headers is probably more robust). Default is the short name of the repository in square brackets; e.g., [myrepo]. Set this value to the empty string to suppress the email prefix.

multimailhook.emailMaxLines

The maximum number of lines that should be included in the body of a generated email. If not specified, there is no limit. Lines beyond the limit are suppressed and counted, and a final line is added indicating the number of suppressed lines.

multimailhook.emailMaxLineLength

The maximum length of a line in the email body. Lines longer than this limit are truncated to this length with a trailing `` […]`` added to indicate the missing text. The default is 500, because (a) diffs with longer lines are probably from binary files, for which a diff is useless, and (b) even if a text file has such long lines, the diffs are probably unreadable anyway. To disable line truncation, set this option to 0.

multimailhook.maxCommitEmails

The maximum number of commit emails to send for a given change. When the number of patches is larger that this value, only the summary refchange email is sent. This can avoid accidental mailbombing, for example on an initial push. To disable commit emails limit, set this option to 0. The default is 500.

multimailhook.emailStrictUTF8

If this boolean option is set to true, then the main part of the email body is forced to be valid UTF-8. Any characters that are not valid UTF-8 are converted to the Unicode replacement character, U+FFFD. The default is true.

multimailhook.diffOpts

Options passed to git diff-tree when generating the summary information for ReferenceChange emails. Default is --stat --summary --find-copies-harder. Add -p to those options to include a unified diff of changes in addition to the usual summary output. Shell quoting is allowed; see multimailhook.logOpts for details.

multimailhook.graphOpts

Options passed to git log --graph when generating graphs for the reference change summary emails (used only if refchangeShowGraph is true). The default is ‘–oneline –decorate’.

Shell quoting is allowed; see logOpts for details.

multimailhook.logOpts

Options passed to git log to generate additional info for reference change emails (used only if refchangeShowLog is set). For example, adding -p will show each commit’s complete diff. The default is empty.

Shell quoting is allowed; for example, a log format that contains spaces can be specified using something like:

git config multimailhook.logopts '--pretty=format:"%h %aN <%aE>%n%s%n%n%b%n"'

If you want to set this by editing your configuration file directly, remember that Git requires double-quotes to be escaped (see git-config(1) for more information):

[multimailhook]
        logopts = --pretty=format:\"%h %aN <%aE>%n%s%n%n%b%n\"

multimailhook.commitLogOpts

Options passed to git log to generate additional info for revision change emails. For example, adding –ignore-all-spaces will suppress whitespace changes. The default options are -C --stat -p --cc. Shell quoting is allowed; see multimailhook.logOpts for details.

multimailhook.dateSubstitute

String to use as a substitute for Date: in the output of git log while formatting commit messages. This is usefull to avoid emitting a line that can be interpreted by mailers as the start of a cited message (Zimbra webmail in particular). Defaults to CommitDate: ``. Set to an empty string or ``none to deactivate the behavior.

multimailhook.emailDomain

Domain name appended to the username of the person doing the push to convert it into an email address (via "%s@%s" % (username, emaildomain)). More complicated schemes can be implemented by overriding Environment and overriding its get_pusher_email() method.

multimailhook.replyTo multimailhook.replyToCommit multimailhook.replyToRefchange

Addresses to use in the Reply-To: field for commit emails (replyToCommit) and refchange emails (replyToRefchange). multimailhook.replyTo is used as default when replyToCommit or replyToRefchange is not set. The shortcuts pusher and author are allowed with the same semantics as for multimailhook.from. In addition, the value none can be used to omit the Reply-To: field.

The default is pusher for refchange emails, and author for commit emails.

multimailhook.quiet

Do not output the list of email recipients from the hook

multimailhook.stdout

For debugging, send emails to stdout rather than to the mailer. Equivalent to the –stdout command line option

multimailhook.scanCommitForCc

If this option is set to true, than recipients from lines in commit body that starts with CC: will be added to CC list. Default: false

multimailhook.combineWhenSingleCommit

If this option is set to true and a single new commit is pushed to a branch, combine the summary and commit email messages into a single email. Default: true

multimailhook.refFilterInclusionRegex multimailhook.refFilterExclusionRegex multimailhook.refFilterDoSendRegex multimailhook.refFilterDontSendRegex

Warning: these options are experimental. They should work, but the user-interface is not stable yet (in particular, the option names may change). If you want to participate in stabilizing the feature, please contact the maintainers and/or send pull-requests.

Regular expressions that can be used to limit refs for which email updates will be sent. It is an error to specify both an inclusion and an exclusion regex. If a refFilterInclusionRegex is specified, emails will only be sent for refs which match this regex. If a refFilterExclusionRegex regex is specified, emails will be sent for all refs except those that match this regex (or that match a predefined regex specific to the environment, such as “^refs/notes” for most environments and “^refs/notes|^refs/changes” for the gerrit environment).

The expressions are matched against the complete refname, and is considered to match if any substring matches. For example, to filter-out all tags, set refFilterExclusionRegex to ^refs/tags/ (note the leading ^ but no trailing $). If you set refFilterExclusionRegex to master, then any ref containing master will be excluded (the master branch, but also refs/tags/master or refs/heads/foo-master-bar).

refFilterDoSendRegex and refFilterDontSendRegex are analogous to refFilterInclusionRegex and refFilterExclusionRegex with one difference: with refFilterDoSendRegex and refFilterDontSendRegex, commits introduced by one excluded ref will not be considered as new when they reach an included ref. Typically, if you add a branch foo to refFilterDontSendRegex, push commits to this branch, and later merge branch foo into master, then the notification email for master will contain a commit email only for the merge commit. If you include foo in refFilterExclusionRegex, then at the time of merge, you will receive one commit email per commit in the branch.

These variables can be multi-valued, like:

[multimailhook]
        refFilterExclusionRegex = ^refs/tags/
        refFilterExclusionRegex = ^refs/heads/master$

You can also provide a whitespace-separated list like:

[multimailhook]
        refFilterExclusionRegex = ^refs/tags/ ^refs/heads/master$

Both examples exclude tags and the master branch, and are equivalent to:

[multimailhook]
        refFilterExclusionRegex = ^refs/tags/|^refs/heads/master$

Email filtering aids

All emails include extra headers to enable fine tuned filtering and give information for debugging. All emails include the headers X-Git-Host, X-Git-Repo, X-Git-Refname, and X-Git-Reftype. ReferenceChange emails also include headers X-Git-Oldrev and X-Git-Newrev; Revision emails also include header X-Git-Rev.

Customizing email contents

git-multimail mostly generates emails by expanding templates. The templates can be customized. To avoid the need to edit git_multimail.py directly, the preferred way to change the templates is to write a separate Python script that imports git_multimail.py as a module, then replaces the templates in place. See the provided post-receive script for an example of how this is done.

Customizing git-multimail for your environment

git-multimail is mostly customized via an “environment” that describes the local environment in which Git is running. Two types of environment are built in:

• GenericEnvironment: a stand-alone Git repository.

• GitoliteEnvironment: a Git repository that is managed by gitolite [3]. For such repositories, the identity of the pusher is read from environment variable $GL_USER, the name of the repository is read from $GL_REPO (if it is not overridden by multimailhook.reponame), and the From: header value is optionally read from gitolite.conf (see multimailhook.from).

By default, git-multimail assumes GitoliteEnvironment if $GL_USER and $GL_REPO are set, and otherwise assumes GenericEnvironment. Alternatively, you can choose one of these two environments explicitly by setting a multimailhook.environment config setting (which can have the value generic or gitolite) or by passing an –environment option to the script.

If you need to customize the script in ways that are not supported by the existing environments, you can define your own environment class class using arbitrary Python code. To do so, you need to import git_multimail.py as a Python module, as demonstrated by the example post-receive script. Then implement your environment class; it should usually inherit from one of the existing Environment classes and possibly one or more of the EnvironmentMixin classes. Then set the environment variable to an instance of your own environment class and pass it to run_as_post_receive_hook().

The standard environment classes, GenericEnvironment and GitoliteEnvironment, are in fact themselves put together out of a number of mixin classes, each of which handles one aspect of the customization. For the finest control over your configuration, you can specify exactly which mixin classes your own environment class should inherit from, and override individual methods (or even add your own mixin classes) to implement entirely new behaviors. If you implement any mixins that might be useful to other people, please consider sharing them with the community!

Getting involved

Please, read CONTRIBUTING.rst for instructions on how to contribute to git-multimail.

Footnotes