haproxy-log-analysis 2.0.2

Tests and coverage

No project is trustworthy if does not have tests and a decent coverage!

Documentation

See the documentation and API at ReadTheDocs.

Command-line interface

The current --help looks like this:

usage: haproxy_log_analysis [-h] [-l LOG] [-s START] [-d DELTA] [-c COMMAND]
                            [-f FILTER] [-n] [--list-commands]
                            [--list-filters]

Analyze HAProxy log files and outputs statistics about it

optional arguments:
  -h, --help            show this help message and exit
  -l LOG, --log LOG     HAProxy log file to analyze
  -s START, --start START
                        Process log entries starting at this time, in HAProxy
                        date format (e.g. 11/Dec/2013 or
                        11/Dec/2013:19:31:41). At least provide the
                        day/month/year. Values not specified will use their
                        base value (e.g. 00 for hour). Use in conjunction with
                        -d to limit the number of entries to process.
  -d DELTA, --delta DELTA
                        Limit the number of entries to process. Express the
                        time delta as a number and a time unit, e.g.: 1s, 10m,
                        3h or 4d (for 1 second, 10 minutes, 3 hours or 4
                        days). Use in conjunction with -s to only analyze
                        certain time delta. If no start time is given, the
                        time on the first line will be used instead.
  -c COMMAND, --command COMMAND
                        List of commands, comma separated, to run on the log
                        file. See --list-commands to get a full list of them.
  -f FILTER, --filter FILTER
                        List of filters to apply on the log file. Passed as
                        comma separated and parameters within square brackets,
                        e.g ip[192.168.1.1],ssl,path[/some/path]. See --list-
                        filters to get a full list of them.
  -n, --negate-filter   Make filters passed with -f work the other way around,
                          i.e. ifthe ``ssl`` filter is passed instead of showing
                        only ssl requests it will show non-ssl traffic. If the
                        ``ip`` filter isused, then all but that ip passed to
                        the filter will be used.
  --list-commands       Lists all commands available.
  --list-filters        Lists all filters available.

Commands

Commands are small purpose specific programs in themselves that report specific statistics about the log file being analyzed. See the --help (or the section above) to know how to run them.

counter

Reports how many log lines could be parsed.

counter_invalid

Reports how many log lines could not be parsed.

http_methods

Reports a breakdown of how many requests have been made per HTTP method (GET, POST…).

ip_counter

Reports a breakdown of how many requests have been made per IP. Note that for this to work you need to configure HAProxy to capture the header that has the IP on it (usually the X-Forwarded-For header). Something like: capture request header X-Forwarded-For len 20

top_ips

Reports the 10 IPs with most requests (and the amount of requests).

status_codes_counter

Reports a breakdown of how many requests per HTTP status code (404, 500, 200, 301..) are on the log file.

request_path_counter

Reports a breakdown of how many requests per path (/rss, /, /another/path).

top_request_paths

Reports the 10 paths with most requests.

slow_requests

Reports a list of requests that downstream servers took more than 1 second to response.

counter_slow_requests

Reports the amount of requests that downstream servers took more than 1 second to response.

average_response_time

Reports the average time (in milliseconds) servers spend to answer requests. .. note:: Aborted requests are not considered.

average_waiting_time

Reports the average time (in milliseconds) requests spend waiting on the various HAProxy queues.

server_load

Reports a breakdown of how many requests were processed by each downstream server. Note that currently it does not take into account the backend the server is configured on.

queue_peaks

Reports a list of queue peaks. A queue peak is defined by the biggest value on the backend queue on a series of log lines that are between log lines without being queued.

connection_type

Reports on how many requests were made on SSL and how many on plain HTTP. This command only works if the default port for SSL (443) appears on the path.

requests_per_minute

Reports on how many requests were made per minute. It works best when used with -s and -d command line arguments, as the output can be huge.

print

Prints the raw lines. This can be useful to trim down a file (with -s and -d for example) so that later runs are faster.

Filters

Filters, contrary to commands, are a way to reduce the amount of log lines to be processed.

ip

Filters log lines by the given IP.

ip_range

Filters log lines by the given IP range (all IPs that begin with the same prefix).

path

Filters log lines by the given string.

ssl

Filters log lines that are from SSL connections. See :method::.HaproxyLogLine.is_https for its limitations.

slow_requests

Filters log lines that take at least the given time to get answered (in milliseconds).

time_frame

This is an implicit filter that is used when --start, and optionally, --delta are used. Do not use this filter on the command line, use --start and --delta instead.

status_code

Filters log lines that match the given HTTP status code (i.e. 404, 200…).

status_code_family

Filters log lines that match the given HTTP status code family (i.e. 4 for all 4xx status codes, 5 for 5xx status codes…).

http_method

Filters log lines by the HTTP method used (GET, POST…).

backend

Filters log lines by the HAProxy backend the connection was handled with.

frontend

Filters log lines by the HAProxy frontend the connection arrived from.

server

Filters log lines by the downstream server that handled the connection.

response_size

Filters log lines by the response size (in bytes). Specially useful when looking for big file downloads.

wait_on_queues

Filters log lines by the amount of time the request had to wait on HAProxy queues. If a request waited less than the given amount of time is accepted.

Installation

After installation you will have a console script haproxy_log_analysis:

$ python setup.py install

TODO

• add more commands: (help appreciated)

  • reports on servers connection time

  • reports on termination state

  • reports around connections (active, frontend, backend, server)

  • your ideas here

• think of a way to show the commands output in a meaningful way

• be able to specify an output format. For any command that makes sense (slow requests for example) output the given fields for each log line (i.e. acceptance date, path, downstream server, load at that time…)

• your ideas

2.0.2 (2016-11-17)

• Improve performance for cmd_print. [kevinjqiu]

2.0.1 (2016-10-29)

• Allow hostnames to have a dot in it. [gforcada]

2.0 (2016-07-06)

• Handle unparseable HTTP requests. [gforcada]

• Only test on python 2.7 and 3.5 [gforcada]

2.0b0 (2016-04-18)

• Check the divisor before doing a divison to not get ZeroDivisionError exceptions. [gforcada]

2.0a0 (2016-03-29)

• Major refactoring:

  # Rename modules and classes:

  • haproxy_logline -> line

  • haproxy_logfile -> logfile

  • HaproxyLogLine -> Line

  • HaproxyLogFile -> Log

  # Parse the log file on Log() creation (i.e. in its __init__)

  [gforcada]

1.3 (2016-03-29)

• New filter: filter_wait_on_queues. Get all requests that waited at maximum X amount of milliseconds on HAProxy queues. [gforcada]

• Code/docs cleanups and add code analysis. [gforcada]

• Avoid using eval. [gforcada]

1.2.1 (2016-02-23)

• Support -1 as a status_code [Christopher Baines]

1.2 (2015-12-07)

• Allow a hostname on the syslog part (not only IPs) [danny crasto]

1.1 (2015-04-19)

• Make syslog optional. Fixes issue https://github.com/gforcada/haproxy_log_analysis/issues/10. [gforcada]

1.0 (2015-03-24)

• Fix issue #9. log line on the syslog part was too strict, it was expecting the hostname to be a string and was failing if it was an IP. [gforcada]

0.0.3.post2 (2015-01-05)

• Finally really fixed issue #7. namespace_packages was not meant to be on setup.py at all. Silly copy&paste mistake. [gforcada]

0.0.3.post (2015-01-04)

• Fix release on PyPI. Solves GitHub issue #7. https://github.com/gforcada/haproxy_log_analysis/issues/7 [gforcada]

0.0.3 (2014-07-09)

• Fix release on PyPI (again). [gforcada]

0.0.2 (2014-07-09)

• Fix release on PyPI. [gforcada]

0.0.1 (2014-07-09)

• Pickle :class::.HaproxyLogFile data for faster performance. [gforcada]

• Add a way to negate the filters, so that instead of being able to filter by IP, it can output all but that IP information. [gforcada]

• Add lots of filters: ip, path, ssl, backend, frontend, server, status_code and so on. See --list-filters for a complete list of them. [gforcada]

• Add :method::.HaproxyLogFile.parse_data method to get data from data stream. It allows you use it as a library. [bogdangi]

• Add --list-filters argument on the command line interface. [gforcada]

• Add --filter argument on the command line interface, inspired by Bogdan’s early design. [bogdangi] [gforcada]

• Create a new module :module::haproxy.filters that holds all available filters. [gforcada]

• Improve :method::.HaproxyLogFile.cmd_queue_peaks output to not only show peaks but also when requests started to queue and when they finsihed and the amount of requests that had been queued. [gforcada]

• Show help when no argument is given. [gforcada]

• Polish documentation and docstrings here and there. [gforcada]

• Add a --list-commands argument on the command line interface. [gforcada]

• Generate an API doc for HaproxyLogLine and HaproxyLogFile. [bogdangi]

• Create a console_script haproxy_log_analysis for ease of use. [bogdangi]

• Add Sphinx documentation system, still empty. [gforcada]

• Keep valid log lines sorted so that the exact order of connections is kept. [gforcada]

• Add quite a few commands, see README.rst for a complete list of them. [gforcada]

• Run commands passed as arguments (with -c flag). [gforcada]

• Add a requirements.txt file to keep track of dependencies and pin them. [gforcada]

• Add travis and coveralls support. See its badges on README.rst. [gforcada]

• Add argument parsing and custom validation logic for all arguments. [gforcada]

• Add regular expressions for haproxy log lines (HTTP format) and to parse HTTP requests path. Added tests to ensure they work as expected. [gforcada]

• Create distribution. [gforcada]