humblesetuptools 3.4.5dev

3.4.4

• Issue #184: Correct failure where find_package over-matched packages when directory traversal isn’t short-circuited.

3.4.3

• Issue #183: Really fix test command with Python 3.1.

3.4.2

• Issue #183: Fix additional regression in test command on Python 3.1.

3.4.1

• Issue #180: Fix regression in test command not caught by py.test-run tests.

3.4

• Issue #176: Add parameter to the test command to support a custom test runner: –test-runner or -r.

• Issue #177: Now assume most common invocation to install command on platforms/environments without stack support (issuing a warning). Setuptools now installs naturally on IronPython. Behavior on CPython should be unchanged.

3.3

• Add include parameter to setuptools.find_packages().

3.2

• Pull Request #39: Add support for C++ targets from Cython .pyx files.

• Issue #162: Update dependency on certifi to 1.0.1.

• Issue #164: Update dependency on wincertstore to 0.2.

3.1

• Issue #161: Restore Features functionality to allow backward compatibility (for Features) until the uses of that functionality is sufficiently removed.

3.0.2

• Correct typo in previous bugfix.

3.0.1

• Issue #157: Restore support for Python 2.6 in bootstrap script where zipfile.ZipFile does not yet have support for context managers.

3.0

• Issue #125: Prevent Subversion support from creating a ~/.subversion directory just for checking the presence of a Subversion repository.

• Issue #12: Namespace packages are now imported lazily. That is, the mere declaration of a namespace package in an egg on sys.path no longer causes it to be imported when pkg_resources is imported. Note that this change means that all of a namespace package’s __init__.py files must include a declare_namespace() call in order to ensure that they will be handled properly at runtime. In 2.x it was possible to get away without including the declaration, but only at the cost of forcing namespace packages to be imported early, which 3.0 no longer does.

• Issue #148: When building (bdist_egg), setuptools no longer adds __init__.py files to namespace packages. Any packages that rely on this behavior will need to create __init__.py files and include the declare_namespace().

• Issue #7: Setuptools itself is now distributed as a zip archive in addition to tar archive. ez_setup.py now uses zip archive. This approach avoids the potential security vulnerabilities presented by use of tar archives in ez_setup.py. It also leverages the security features added to ZipFile.extract in Python 2.7.4.

• Issue #65: Removed deprecated Features functionality.

• Pull Request #28: Remove backport of _bytecode_filenames which is available in Python 2.6 and later, but also has better compatibility with Python 3 environments.

• Issue #156: Fix spelling of __PYVENV_LAUNCHER__ variable.

2.2

• Issue #141: Restored fix for allowing setup_requires dependencies to override installed dependencies during setup.

• Issue #128: Fixed issue where only the first dependency link was honored in a distribution where multiple dependency links were supplied.

2.1.2

• Issue #144: Read long_description using codecs module to avoid errors installing on systems where LANG=C.

2.1.1

• Issue #139: Fix regression in re_finder for CVS repos (and maybe Git repos as well).

2.1

• Issue #129: Suppress inspection of *.whl files when searching for files in a zip-imported file.

• Issue #131: Fix RuntimeError when constructing an egg fetcher.

2.0.2

• Fix NameError during installation with Python implementations (e.g. Jython) not containing parser module.

• Fix NameError in sdist:re_finder.

2.0.1

• Issue #124: Fixed error in list detection in upload_docs.

2.0

• Issue #121: Exempt lib2to3 pickled grammars from DirectorySandbox.

• Issue #41: Dropped support for Python 2.4 and Python 2.5. Clients requiring setuptools for those versions of Python should use setuptools 1.x.

• Removed setuptools.command.easy_install.HAS_USER_SITE. Clients expecting this boolean variable should use site.ENABLE_USER_SITE instead.

• Removed pkg_resources.ImpWrapper. Clients that expected this class should use pkgutil.ImpImporter instead.

1.4.2

• Issue #116: Correct TypeError when reading a local package index on Python 3.

1.4.1

• Issue #114: Use sys.getfilesystemencoding for decoding config in bdist_wininst distributions.

• Issue #105 and Issue #113: Establish a more robust technique for determining the terminal encoding:

  1. Try ``getpreferredencoding``
  2. If that returns US_ASCII or None, try the encoding from
     ``getdefaultlocale``. If that encoding was a "fallback" because Python
     could not figure it out from the environment or OS, encoding remains
     unresolved.
  3. If the encoding is resolved, then make sure Python actually implements
     the encoding.
  4. On the event of an error or unknown codec, revert to fallbacks
     (UTF-8 on Darwin, ASCII on everything else).
  5. On the encoding is 'mac-roman' on Darwin, use UTF-8 as 'mac-roman' was
     a bug on older Python releases.
  
  On a side note, it would seem that the encoding only matters for when SVN
  does not yet support ``--xml`` and when getting repository and svn version
  numbers. The ``--xml`` technique should yield UTF-8 according to some
  messages on the SVN mailing lists. So if the version numbers are always
  7-bit ASCII clean, it may be best to only support the file parsing methods
  for legacy SVN releases and support for SVN without the subprocess command
  would simple go away as support for the older SVNs does.

1.4

• Issue #27: easy_install will now use credentials from .pypirc if present for connecting to the package index.

• Pull Request #21: Omit unwanted newlines in package_index._encode_auth when the username/password pair length indicates wrapping.

1.3.2

• Issue #99: Fix filename encoding issues in SVN support.

1.3.1

• Remove exuberant warning in SVN support when SVN is not used.

1.3

• Address security vulnerability in SSL match_hostname check as reported in Python #17997.

• Prefer backports.ssl_match_hostname for backport implementation if present.

• Correct NameError in ssl_support module (socket.error).

1.2

• Issue #26: Add support for SVN 1.7. Special thanks to Philip Thiem for the contribution.

• Issue #93: Wheels are now distributed with every release. Note that as reported in Issue #108, as of Pip 1.4, scripts aren’t installed properly from wheels. Therefore, if using Pip to install setuptools from a wheel, the easy_install command will not be available.

• Setuptools “natural” launcher support, introduced in 1.0, is now officially supported.

1.1.7

• Fixed behavior of NameError handling in ‘script template (dev).py’ (script launcher for ‘develop’ installs).

• ez_setup.py now ensures partial downloads are cleaned up following a failed download.

• Distribute #363 and Issue #55: Skip an sdist test that fails on locales other than UTF-8.

1.1.6

• Distribute #349: sandbox.execfile now opens the target file in binary mode, thus honoring a BOM in the file when compiled.

1.1.5

• Issue #69: Second attempt at fix (logic was reversed).

1.1.4

• Issue #77: Fix error in upload command (Python 2.4).

1.1.3

• Fix NameError in previous patch.

1.1.2

• Issue #69: Correct issue where 404 errors are returned for URLs with fragments in them (such as #egg=).

1.1.1

• Issue #75: Add --insecure option to ez_setup.py to accommodate environments where a trusted SSL connection cannot be validated.

• Issue #76: Fix AttributeError in upload command with Python 2.4.

1.1

• Issue #71 (Distribute #333): EasyInstall now puts less emphasis on the condition when a host is blocked via --allow-hosts.

• Issue #72: Restored Python 2.4 compatibility in ez_setup.py.

1.0

• Issue #60: On Windows, Setuptools supports deferring to another launcher, such as Vinay Sajip’s pylauncher (included with Python 3.3) to launch console and GUI scripts and not install its own launcher executables. This experimental functionality is currently only enabled if the SETUPTOOLS_LAUNCHER environment variable is set to “natural”. In the future, this behavior may become default, but only after it has matured and seen substantial adoption. The SETUPTOOLS_LAUNCHER also accepts “executable” to force the default behavior of creating launcher executables.

• Issue #63: Bootstrap script (ez_setup.py) now prefers Powershell, curl, or wget for retrieving the Setuptools tarball for improved security of the install. The script will still fall back to a simple urlopen on platforms that do not have these tools.

• Issue #65: Deprecated the Features functionality.

• Issue #52: In VerifyingHTTPSConn, handle a tunnelled (proxied) connection.

0.9.8

• Issue #53: Fix NameErrors in _vcs_split_rev_from_url.

0.9.7

• Issue #49: Correct AttributeError on PyPy where a hashlib.HASH object does not have a .name attribute.

• Issue #34: Documentation now refers to bootstrap script in code repository referenced by bookmark.

• Add underscore-separated keys to environment markers (markerlib).

0.9.6

• Issue #44: Test failure on Python 2.4 when MD5 hash doesn’t have a .name attribute.

0.9.5

• Python #17980: Fix security vulnerability in SSL certificate validation.

0.9.4

• Issue #43: Fix issue (introduced in 0.9.1) with version resolution when upgrading over other releases of Setuptools.

0.9.3

• Issue #42: Fix new AttributeError introduced in last fix.

0.9.2

• Issue #42: Fix regression where blank checksums would trigger an AttributeError.

0.9.1

• Distribute #386: Allow other positional and keyword arguments to os.open.

• Corrected dependency on certifi mis-referenced in 0.9.

0.9

• package_index now validates hashes other than MD5 in download links.

0.8

• Code base now runs on Python 2.4 - Python 3.3 without Python 2to3 conversion.

0.7.8

• Distribute #375: Yet another fix for yet another regression.

0.7.7

• Distribute #375: Repair AttributeError created in last release (redo).

• Issue #30: Added test for get_cache_path.

0.7.6

• Distribute #375: Repair AttributeError created in last release.

0.7.5

• Issue #21: Restore Python 2.4 compatibility in test_easy_install.

• Distribute #375: Merged additional warning from Distribute 0.6.46.

• Now honor the environment variable SETUPTOOLS_DISABLE_VERSIONED_EASY_INSTALL_SCRIPT in addition to the now deprecated DISTRIBUTE_DISABLE_VERSIONED_EASY_INSTALL_SCRIPT.

0.7.4

• Issue #20: Fix comparison of parsed SVN version on Python 3.

0.7.3

• Issue #1: Disable installation of Windows-specific files on non-Windows systems.

• Use new sysconfig module with Python 2.7 or >=3.2.

0.7.2

• Issue #14: Use markerlib when the parser module is not available.

• Issue #10: ez_setup.py now uses HTTPS to download setuptools from PyPI.

0.7.1

• Fix NameError (Issue #3) again - broken in bad merge.

0.7

• Merged Setuptools and Distribute. See docs/merge.txt for details.

Added several features that were slated for setuptools 0.6c12:

• Index URL now defaults to HTTPS.

• Added experimental environment marker support. Now clients may designate a PEP-426 environment marker for “extra” dependencies. Setuptools uses this feature in setup.py for optional SSL and certificate validation support on older platforms. Based on Distutils-SIG discussions, the syntax is somewhat tentative. There should probably be a PEP with a firmer spec before the feature should be considered suitable for use.

• Added support for SSL certificate validation when installing packages from an HTTPS service.

0.7b4

• Issue #3: Fixed NameError in SSL support.

0.6.49

• Move warning check in get_cache_path to follow the directory creation to avoid errors when the cache path does not yet exist. Fixes the error reported in Distribute #375.

0.6.48

• Correct AttributeError in ResourceManager.get_cache_path introduced in 0.6.46 (redo).

0.6.47

• Correct AttributeError in ResourceManager.get_cache_path introduced in 0.6.46.

0.6.46

• Distribute #375: Issue a warning if the PYTHON_EGG_CACHE or otherwise customized egg cache location specifies a directory that’s group- or world-writable.

0.6.45

• Distribute #379: distribute_setup.py now traps VersionConflict as well, restoring ability to upgrade from an older setuptools version.

0.6.44

• distribute_setup.py has been updated to allow Setuptools 0.7 to satisfy use_setuptools.

0.6.43

• Distribute #378: Restore support for Python 2.4 Syntax (regression in 0.6.42).

0.6.42

• External links finder no longer yields duplicate links.

• Distribute #337: Moved site.py to setuptools/site-patch.py (graft of very old patch from setuptools trunk which inspired PR #31).

0.6.41

• Distribute #27: Use public api for loading resources from zip files rather than the private method _zip_directory_cache.

• Added a new function easy_install.get_win_launcher which may be used by third-party libraries such as buildout to get a suitable script launcher.

0.6.40

• Distribute #376: brought back cli.exe and gui.exe that were deleted in the previous release.

0.6.39

• Add support for console launchers on ARM platforms.

• Fix possible issue in GUI launchers where the subsystem was not supplied to the linker.

• Launcher build script now refactored for robustness.

• Distribute #375: Resources extracted from a zip egg to the file system now also check the contents of the file against the zip contents during each invocation of get_resource_filename.

0.6.38

• Distribute #371: The launcher manifest file is now installed properly.

0.6.37

• Distribute #143: Launcher scripts, including easy_install itself, are now accompanied by a manifest on 32-bit Windows environments to avoid the Installer Detection Technology and thus undesirable UAC elevation described in this Microsoft article.

0.6.36

• Pull Request #35: In Buildout #64, it was reported that under Python 3, installation of distutils scripts could attempt to copy the __pycache__ directory as a file, causing an error, apparently only under Windows. Easy_install now skips all directories when processing metadata scripts.

0.6.35

Note this release is backward-incompatible with distribute 0.6.23-0.6.34 in how it parses version numbers.

• Distribute #278: Restored compatibility with distribute 0.6.22 and setuptools 0.6. Updated the documentation to match more closely with the version parsing as intended in setuptools 0.6.

0.6.34

• Distribute #341: 0.6.33 fails to build under Python 2.4.

0.6.33

• Fix 2 errors with Jython 2.5.

• Fix 1 failure with Jython 2.5 and 2.7.

• Disable workaround for Jython scripts on Linux systems.

• Distribute #336: setup.py no longer masks failure exit code when tests fail.

• Fix issue in pkg_resources where try/except around a platform-dependent import would trigger hook load failures on Mercurial. See pull request 32 for details.

• Distribute #341: Fix a ResourceWarning.

0.6.32

• Fix test suite with Python 2.6.

• Fix some DeprecationWarnings and ResourceWarnings.

• Distribute #335: Backed out setup_requires superceding installed requirements until regression can be addressed.

0.6.31

• Distribute #303: Make sure the manifest only ever contains UTF-8 in Python 3.

• Distribute #329: Properly close files created by tests for compatibility with Jython.

• Work around Jython #1980 and Jython #1981.

• Distribute #334: Provide workaround for packages that reference sys.__stdout__ such as numpy does. This change should address virtualenv #359 as long as the system encoding is UTF-8 or the IO encoding is specified in the environment, i.e.:

  PYTHONIOENCODING=utf8 pip install numpy

• Fix for encoding issue when installing from Windows executable on Python 3.

• Distribute #323: Allow setup_requires requirements to supercede installed requirements. Added some new keyword arguments to existing pkg_resources methods. Also had to updated how __path__ is handled for namespace packages to ensure that when a new egg distribution containing a namespace package is placed on sys.path, the entries in __path__ are found in the same order they would have been in had that egg been on the path when pkg_resources was first imported.

0.6.30

• Distribute #328: Clean up temporary directories in distribute_setup.py.

• Fix fatal bug in distribute_setup.py.

0.6.29

• Pull Request #14: Honor file permissions in zip files.

• Distribute #327: Merged pull request #24 to fix a dependency problem with pip.

• Merged pull request #23 to fix https://github.com/pypa/virtualenv/issues/301.

• If Sphinx is installed, the upload_docs command now runs build_sphinx to produce uploadable documentation.

• Distribute #326: upload_docs provided mangled auth credentials under Python 3.

• Distribute #320: Fix check for “createable” in distribute_setup.py.

• Distribute #305: Remove a warning that was triggered during normal operations.

• Distribute #311: Print metadata in UTF-8 independent of platform.

• Distribute #303: Read manifest file with UTF-8 encoding under Python 3.

• Distribute #301: Allow to run tests of namespace packages when using 2to3.

• Distribute #304: Prevent import loop in site.py under Python 3.3.

• Distribute #283: Reenable scanning of *.pyc / *.pyo files on Python 3.3.

• Distribute #299: The develop command didn’t work on Python 3, when using 2to3, as the egg link would go to the Python 2 source. Linking to the 2to3’d code in build/lib makes it work, although you will have to rebuild the module before testing it.

• Distribute #306: Even if 2to3 is used, we build in-place under Python 2.

• Distribute #307: Prints the full path when .svn/entries is broken.

• Distribute #313: Support for sdist subcommands (Python 2.7)

• Distribute #314: test_local_index() would fail an OS X.

• Distribute #310: Non-ascii characters in a namespace __init__.py causes errors.

• Distribute #218: Improved documentation on behavior of package_data and include_package_data. Files indicated by package_data are now included in the manifest.

• distribute_setup.py now allows a –download-base argument for retrieving distribute from a specified location.

0.6.28

• Distribute #294: setup.py can now be invoked from any directory.

• Scripts are now installed honoring the umask.

• Added support for .dist-info directories.

• Distribute #283: Fix and disable scanning of *.pyc / *.pyo files on Python 3.3.

0.6.27

• Support current snapshots of CPython 3.3.

• Distribute now recognizes README.rst as a standard, default readme file.

• Exclude ‘encodings’ modules when removing modules from sys.modules. Workaround for #285.

• Distribute #231: Don’t fiddle with system python when used with buildout (bootstrap.py)

0.6.26

• Distribute #183: Symlinked files are now extracted from source distributions.

• Distribute #227: Easy_install fetch parameters are now passed during the installation of a source distribution; now fulfillment of setup_requires dependencies will honor the parameters passed to easy_install.

0.6.25

• Distribute #258: Workaround a cache issue

• Distribute #260: distribute_setup.py now accepts the –user parameter for Python 2.6 and later.

• Distribute #262: package_index.open_with_auth no longer throws LookupError on Python 3.

• Distribute #269: AttributeError when an exception occurs reading Manifest.in on late releases of Python.

• Distribute #272: Prevent TypeError when namespace package names are unicode and single-install-externally-managed is used. Also fixes PIP issue 449.

• Distribute #273: Legacy script launchers now install with Python2/3 support.

0.6.24

• Distribute #249: Added options to exclude 2to3 fixers

0.6.23

• Distribute #244: Fixed a test

• Distribute #243: Fixed a test

• Distribute #239: Fixed a test

• Distribute #240: Fixed a test

• Distribute #241: Fixed a test

• Distribute #237: Fixed a test

• Distribute #238: easy_install now uses 64bit executable wrappers on 64bit Python

• Distribute #208: Fixed parsed_versions, it now honors post-releases as noted in the documentation

• Distribute #207: Windows cli and gui wrappers pass CTRL-C to child python process

• Distribute #227: easy_install now passes its arguments to setup.py bdist_egg

• Distribute #225: Fixed a NameError on Python 2.5, 2.4

0.6.21

• Distribute #225: FIxed a regression on py2.4

0.6.20

• Distribute #135: Include url in warning when processing URLs in package_index.

• Distribute #212: Fix issue where easy_instal fails on Python 3 on windows installer.

• Distribute #213: Fix typo in documentation.

0.6.19

• Distribute #206: AttributeError: ‘HTTPMessage’ object has no attribute ‘getheaders’

0.6.18

• Distribute #210: Fixed a regression introduced by Distribute #204 fix.

0.6.17

• Support ‘DISTRIBUTE_DISABLE_VERSIONED_EASY_INSTALL_SCRIPT’ environment variable to allow to disable installation of easy_install-${version} script.

• Support Python >=3.1.4 and >=3.2.1.

• Distribute #204: Don’t try to import the parent of a namespace package in declare_namespace

• Distribute #196: Tolerate responses with multiple Content-Length headers

• Distribute #205: Sandboxing doesn’t preserve working_set. Leads to setup_requires problems.

0.6.16

• Builds sdist gztar even on Windows (avoiding Distribute #193).

• Distribute #192: Fixed metadata omitted on Windows when package_dir specified with forward-slash.

• Distribute #195: Cython build support.

• Distribute #200: Issues with recognizing 64-bit packages on Windows.

0.6.15

• Fixed typo in bdist_egg

• Several issues under Python 3 has been solved.

• Distribute #146: Fixed missing DLL files after easy_install of windows exe package.

0.6.14

• Distribute #170: Fixed unittest failure. Thanks to Toshio.

• Distribute #171: Fixed race condition in unittests cause deadlocks in test suite.

• Distribute #143: Fixed a lookup issue with easy_install. Thanks to David and Zooko.

• Distribute #174: Fixed the edit mode when its used with setuptools itself

0.6.13

• Distribute #160: 2.7 gives ValueError(“Invalid IPv6 URL”)

• Distribute #150: Fixed using ~/.local even in a –no-site-packages virtualenv

• Distribute #163: scan index links before external links, and don’t use the md5 when comparing two distributions

0.6.12

• Distribute #149: Fixed various failures on 2.3/2.4

0.6.11

• Found another case of SandboxViolation - fixed

• Distribute #15 and Distribute #48: Introduced a socket timeout of 15 seconds on url openings

• Added indexsidebar.html into MANIFEST.in

• Distribute #108: Fixed TypeError with Python3.1

• Distribute #121: Fixed –help install command trying to actually install.

• Distribute #112: Added an os.makedirs so that Tarek’s solution will work.

• Distribute #133: Added –no-find-links to easy_install

• Added easy_install –user

• Distribute #100: Fixed develop –user not taking ‘.’ in PYTHONPATH into account

• Distribute #134: removed spurious UserWarnings. Patch by VanLindberg

• Distribute #138: cant_write_to_target error when setup_requires is used.

• Distribute #147: respect the sys.dont_write_bytecode flag

0.6.10

• Reverted change made for the DistributionNotFound exception because zc.buildout uses the exception message to get the name of the distribution.

0.6.9

• Distribute #90: unknown setuptools version can be added in the working set

• Distribute #87: setupt.py doesn’t try to convert distribute_setup.py anymore Initial Patch by arfrever.

• Distribute #89: added a side bar with a download link to the doc.

• Distribute #86: fixed missing sentence in pkg_resources doc.

• Added a nicer error message when a DistributionNotFound is raised.

• Distribute #80: test_develop now works with Python 3.1

• Distribute #93: upload_docs now works if there is an empty sub-directory.

• Distribute #70: exec bit on non-exec files

• Distribute #99: now the standalone easy_install command doesn’t uses a “setup.cfg” if any exists in the working directory. It will use it only if triggered by install_requires from a setup.py call (install, develop, etc).

• Distribute #101: Allowing os.devnull in Sandbox

• Distribute #92: Fixed the “no eggs” found error with MacPort (platform.mac_ver() fails)

• Distribute #103: test_get_script_header_jython_workaround not run anymore under py3 with C or POSIX local. Contributed by Arfrever.

• Distribute #104: remvoved the assertion when the installation fails, with a nicer message for the end user.

• Distribute #100: making sure there’s no SandboxViolation when the setup script patches setuptools.

0.6.8

• Added “check_packages” in dist. (added in Setuptools 0.6c11)

• Fixed the DONT_PATCH_SETUPTOOLS state.

0.6.7

• Distribute #58: Added –user support to the develop command

• Distribute #11: Generated scripts now wrap their call to the script entry point in the standard “if name == ‘main’”

• Added the ‘DONT_PATCH_SETUPTOOLS’ environment variable, so virtualenv can drive an installation that doesn’t patch a global setuptools.

• Reviewed unladen-swallow specific change from http://code.google.com/p/unladen-swallow/source/detail?spec=svn875&r=719 and determined that it no longer applies. Distribute should work fine with Unladen Swallow 2009Q3.

• Distribute #21: Allow PackageIndex.open_url to gracefully handle all cases of a httplib.HTTPException instead of just InvalidURL and BadStatusLine.

• Removed virtual-python.py from this distribution and updated documentation to point to the actively maintained virtualenv instead.

• Distribute #64: use_setuptools no longer rebuilds the distribute egg every time it is run

• use_setuptools now properly respects the requested version

• use_setuptools will no longer try to import a distribute egg for the wrong Python version

• Distribute #74: no_fake should be True by default.

• Distribute #72: avoid a bootstrapping issue with easy_install -U

0.6.6

• Unified the bootstrap file so it works on both py2.x and py3k without 2to3 (patch by Holger Krekel)

0.6.5

• Distribute #65: cli.exe and gui.exe are now generated at build time, depending on the platform in use.

• Distribute #67: Fixed doc typo (PEP 381/382)

• Distribute no longer shadows setuptools if we require a 0.7-series setuptools. And an error is raised when installing a 0.7 setuptools with distribute.

• When run from within buildout, no attempt is made to modify an existing setuptools egg, whether in a shared egg directory or a system setuptools.

• Fixed a hole in sandboxing allowing builtin file to write outside of the sandbox.

0.6.4

• Added the generation of distribute_setup_3k.py during the release. This closes Distribute #52.

• Added an upload_docs command to easily upload project documentation to PyPI’s https://pythonhosted.org. This close issue Distribute #56.

• Fixed a bootstrap bug on the use_setuptools() API.

0.6.3

0.6.2

0.6.1

0.6

0.6c9

• Fixed a missing files problem when using Windows source distributions on non-Windows platforms, due to distutils not handling manifest file line endings correctly.

• Updated Pyrex support to work with Pyrex 0.9.6 and higher.

• Minor changes for Jython compatibility, including skipping tests that can’t work on Jython.

• Fixed not installing eggs in install_requires if they were also used for setup_requires or tests_require.

• Fixed not fetching eggs in install_requires when running tests.

• Allow ez_setup.use_setuptools() to upgrade existing setuptools installations when called from a standalone setup.py.

• Added a warning if a namespace package is declared, but its parent package is not also declared as a namespace.

• Support Subversion 1.5

• Removed use of deprecated md5 module if hashlib is available

• Fixed bdist_wininst upload trying to upload the .exe twice

• Fixed bdist_egg putting a native_libs.txt in the source package’s .egg-info, when it should only be in the built egg’s EGG-INFO.

• Ensure that _full_name is set on all shared libs before extensions are checked for shared lib usage. (Fixes a bug in the experimental shared library build support.)

• Fix to allow unpacked eggs containing native libraries to fail more gracefully under Google App Engine (with an ImportError loading the C-based module, instead of getting a NameError).

0.6c7

• Fixed distutils.filelist.findall() crashing on broken symlinks, and egg_info command failing on new, uncommitted SVN directories.

• Fix import problems with nested namespace packages installed via --root or --single-version-externally-managed, due to the parent package not having the child package as an attribute.

0.6c6

• Added --egg-path option to develop command, allowing you to force .egg-link files to use relative paths (allowing them to be shared across platforms on a networked drive).

• Fix not building binary RPMs correctly.

• Fix “eggsecutables” (such as setuptools’ own egg) only being runnable with bash-compatible shells.

• Fix #! parsing problems in Windows .exe script wrappers, when there was whitespace inside a quoted argument or at the end of the #! line (a regression introduced in 0.6c4).

• Fix test command possibly failing if an older version of the project being tested was installed on sys.path ahead of the test source directory.

• Fix find_packages() treating ez_setup and directories with . in their names as packages.

0.6c5

• Fix uploaded bdist_rpm packages being described as bdist_egg packages under Python versions less than 2.5.

• Fix uploaded bdist_wininst packages being described as suitable for “any” version by Python 2.5, even if a --target-version was specified.

0.6c4

• Overhauled Windows script wrapping to support bdist_wininst better. Scripts installed with bdist_wininst will always use #!python.exe or #!pythonw.exe as the executable name (even when built on non-Windows platforms!), and the wrappers will look for the executable in the script’s parent directory (which should find the right version of Python).

• Fix upload command not uploading files built by bdist_rpm or bdist_wininst under Python 2.3 and 2.4.

• Add support for “eggsecutable” headers: a #!/bin/sh script that is prepended to an .egg file to allow it to be run as a script on Unix-ish platforms. (This is mainly so that setuptools itself can have a single-file installer on Unix, without doing multiple downloads, dealing with firewalls, etc.)

• Fix problem with empty revision numbers in Subversion 1.4 entries files

• Use cross-platform relative paths in easy-install.pth when doing develop and the source directory is a subdirectory of the installation target directory.

• Fix a problem installing eggs with a system packaging tool if the project contained an implicit namespace package; for example if the setup() listed a namespace package foo.bar without explicitly listing foo as a namespace package.

0.6c3

• Fixed breakages caused by Subversion 1.4’s new “working copy” format

0.6c2

• The ez_setup module displays the conflicting version of setuptools (and its installation location) when a script requests a version that’s not available.

• Running setup.py develop on a setuptools-using project will now install setuptools if needed, instead of only downloading the egg.

0.6c1

• Fixed AttributeError when trying to download a setup_requires dependency when a distribution lacks a dependency_links setting.

• Made zip-safe and not-zip-safe flag files contain a single byte, so as to play better with packaging tools that complain about zero-length files.

• Made setup.py develop respect the --no-deps option, which it previously was ignoring.

• Support extra_path option to setup() when install is run in backward-compatibility mode.

• Source distributions now always include a setup.cfg file that explicitly sets egg_info options such that they produce an identical version number to the source distribution’s version number. (Previously, the default version number could be different due to the use of --tag-date, or if the version was overridden on the command line that built the source distribution.)

0.6b4

• Fix register not obeying name/version set by egg_info command, if egg_info wasn’t explicitly run first on the same command line.

• Added --no-date and --no-svn-revision options to egg_info command, to allow suppressing tags configured in setup.cfg.

• Fixed redundant warnings about missing README file(s); it should now appear only if you are actually a source distribution.

0.6b3

• Fix bdist_egg not including files in subdirectories of .egg-info.

• Allow .py files found by the include_package_data option to be automatically included. Remove duplicate data file matches if both include_package_data and package_data are used to refer to the same files.

0.6b1

• Strip module from the end of compiled extension modules when computing the name of a .py loader/wrapper. (Python’s import machinery ignores this suffix when searching for an extension module.)

0.6a11

• Added test_loader keyword to support custom test loaders

• Added setuptools.file_finders entry point group to allow implementing revision control plugins.

• Added --identity option to upload command.

• Added dependency_links to allow specifying URLs for --find-links.

• Enhanced test loader to scan packages as well as modules, and call additional_tests() if present to get non-unittest tests.

• Support namespace packages in conjunction with system packagers, by omitting the installation of any __init__.py files for namespace packages, and adding a special .pth file to create a working package in sys.modules.

• Made --single-version-externally-managed automatic when --root is used, so that most system packagers won’t require special support for setuptools.

• Fixed setup_requires, tests_require, etc. not using setup.cfg or other configuration files for their option defaults when installing, and also made the install use --multi-version mode so that the project directory doesn’t need to support .pth files.

• MANIFEST.in is now forcibly closed when any errors occur while reading it. Previously, the file could be left open and the actual error would be masked by problems trying to remove the open file on Windows systems.

0.6a10

• Fixed the develop command ignoring --find-links.

0.6a9

• The sdist command no longer uses the traditional MANIFEST file to create source distributions. MANIFEST.in is still read and processed, as are the standard defaults and pruning. But the manifest is built inside the project’s .egg-info directory as SOURCES.txt, and it is rebuilt every time the egg_info command is run.

• Added the include_package_data keyword to setup(), allowing you to automatically include any package data listed in revision control or MANIFEST.in

• Added the exclude_package_data keyword to setup(), allowing you to trim back files included via the package_data and include_package_data options.

• Fixed --tag-svn-revision not working when run from a source distribution.

• Added warning for namespace packages with missing declare_namespace()

• Added tests_require keyword to setup(), so that e.g. packages requiring nose to run unit tests can make this dependency optional unless the test command is run.

• Made all commands that use easy_install respect its configuration options, as this was causing some problems with setup.py install.

• Added an unpack_directory() driver to setuptools.archive_util, so that you can process a directory tree through a processing filter as if it were a zipfile or tarfile.

• Added an internal install_egg_info command to use as part of old-style install operations, that installs an .egg-info directory with the package.

• Added a --single-version-externally-managed option to the install command so that you can more easily wrap a “flat” egg in a system package.

• Enhanced bdist_rpm so that it installs single-version eggs that don’t rely on a .pth file. The --no-egg option has been removed, since all RPMs are now built in a more backwards-compatible format.

• Support full roundtrip translation of eggs to and from bdist_wininst format. Running bdist_wininst on a setuptools-based package wraps the egg in an .exe that will safely install it as an egg (i.e., with metadata and entry-point wrapper scripts), and easy_install can turn the .exe back into an .egg file or directory and install it as such.

0.6a8

• Fixed some problems building extensions when Pyrex was installed, especially with Python 2.4 and/or packages using SWIG.

• Made develop command accept all the same options as easy_install, and use the easy_install command’s configuration settings as defaults.

• Made egg_info --tag-svn-revision fall back to extracting the revision number from PKG-INFO in case it is being run on a source distribution of a snapshot taken from a Subversion-based project.

• Automatically detect .dll, .so and .dylib files that are being installed as data, adding them to native_libs.txt automatically.

• Fixed some problems with fresh checkouts of projects that don’t include .egg-info/PKG-INFO under revision control and put the project’s source code directly in the project directory. If such a package had any requirements that get processed before the egg_info command can be run, the setup scripts would fail with a “Missing ‘Version:’ header and/or PKG-INFO file” error, because the egg runtime interpreted the unbuilt metadata in a directory on sys.path (i.e. the current directory) as being a corrupted egg. Setuptools now monkeypatches the distribution metadata cache to pretend that the egg has valid version information, until it has a chance to make it actually be so (via the egg_info command).

0.6a5

• Fixed missing gui/cli .exe files in distribution. Fixed bugs in tests.

0.6a3

• Added gui_scripts entry point group to allow installing GUI scripts on Windows and other platforms. (The special handling is only for Windows; other platforms are treated the same as for console_scripts.)

0.6a2

• Added console_scripts entry point group to allow installing scripts without the need to create separate script files. On Windows, console scripts get an .exe wrapper so you can just type their name. On other platforms, the scripts are written without a file extension.

0.6a1

• Added support for building “old-style” RPMs that don’t install an egg for the target package, using a --no-egg option.

• The build_ext command now works better when using the --inplace option and multiple Python versions. It now makes sure that all extensions match the current Python version, even if newer copies were built for a different Python version.

• The upload command no longer attaches an extra .zip when uploading eggs, as PyPI now supports egg uploads without trickery.

• The ez_setup script/module now displays a warning before downloading the setuptools egg, and attempts to check the downloaded egg against an internal MD5 checksum table.

• Fixed the --tag-svn-revision option of egg_info not finding the latest revision number; it was using the revision number of the directory containing setup.py, not the highest revision number in the project.

• Added eager_resources setup argument

• The sdist command now recognizes Subversion “deleted file” entries and does not include them in source distributions.

• setuptools now embeds itself more thoroughly into the distutils, so that other distutils extensions (e.g. py2exe, py2app) will subclass setuptools’ versions of things, rather than the native distutils ones.

• Added entry_points and setup_requires arguments to setup(); setup_requires allows you to automatically find and download packages that are needed in order to build your project (as opposed to running it).

• setuptools now finds its commands, setup() argument validators, and metadata writers using entry points, so that they can be extended by third-party packages. See Creating distutils Extensions for more details.

• The vestigial depends command has been removed. It was never finished or documented, and never would have worked without EasyInstall - which it pre-dated and was never compatible with.

0.5a12

• The zip-safety scanner now checks for modules that might be used with python -m, and marks them as unsafe for zipping, since Python 2.4 can’t handle -m on zipped modules.

0.5a11

• Fix breakage of the “develop” command that was caused by the addition of --always-unzip to the easy_install command.

0.5a9

• Include svn:externals directories in source distributions as well as normal subversion-controlled files and directories.

• Added exclude=patternlist option to setuptools.find_packages()

• Changed –tag-svn-revision to include an “r” in front of the revision number for better readability.

• Added ability to build eggs without including source files (except for any scripts, of course), using the --exclude-source-files option to bdist_egg.

• setup.py install now automatically detects when an “unmanaged” package or module is going to be on sys.path ahead of a package being installed, thereby preventing the newer version from being imported. If this occurs, a warning message is output to sys.stderr, but installation proceeds anyway. The warning message informs the user what files or directories need deleting, and advises them they can also use EasyInstall (with the --delete-conflicting option) to do it automatically.

• The egg_info command now adds a top_level.txt file to the metadata directory that lists all top-level modules and packages in the distribution. This is used by the easy_install command to find possibly-conflicting “unmanaged” packages when installing the distribution.

• Added zip_safe and namespace_packages arguments to setup(). Added package analysis to determine zip-safety if the zip_safe flag is not given, and advise the author regarding what code might need changing.

• Fixed the swapped -d and -b options of bdist_egg.

0.5a8

• The “egg_info” command now always sets the distribution metadata to “safe” forms of the distribution name and version, so that distribution files will be generated with parseable names (i.e., ones that don’t include ‘-’ in the name or version). Also, this means that if you use the various --tag options of “egg_info”, any distributions generated will use the tags in the version, not just egg distributions.

• Added support for defining command aliases in distutils configuration files, under the “[aliases]” section. To prevent recursion and to allow aliases to call the command of the same name, a given alias can be expanded only once per command-line invocation. You can define new aliases with the “alias” command, either for the local, global, or per-user configuration.

• Added “rotate” command to delete old distribution files, given a set of patterns to match and the number of files to keep. (Keeps the most recently-modified distribution files matching each pattern.)

• Added “saveopts” command that saves all command-line options for the current invocation to the local, global, or per-user configuration file. Useful for setting defaults without having to hand-edit a configuration file.

• Added a “setopt” command that sets a single option in a specified distutils configuration file.

0.5a7

• Added “upload” support for egg and source distributions, including a bug fix for “upload” and a temporary workaround for lack of .egg support in PyPI.

0.5a6

• Beefed up the “sdist” command so that if you don’t have a MANIFEST.in, it will include all files under revision control (CVS or Subversion) in the current directory, and it will regenerate the list every time you create a source distribution, not just when you tell it to. This should make the default “do what you mean” more often than the distutils’ default behavior did, while still retaining the old behavior in the presence of MANIFEST.in.

• Fixed the “develop” command always updating .pth files, even if you specified -n or --dry-run.

• Slightly changed the format of the generated version when you use --tag-build on the “egg_info” command, so that you can make tagged revisions compare lower than the version specified in setup.py (e.g. by using --tag-build=dev).

0.5a5

• Added develop command to setuptools-based packages. This command installs an .egg-link pointing to the package’s source directory, and script wrappers that execfile() the source versions of the package’s scripts. This lets you put your development checkout(s) on sys.path without having to actually install them. (To uninstall the link, use use setup.py develop --uninstall.)

• Added egg_info command to setuptools-based packages. This command just creates or updates the “projectname.egg-info” directory, without building an egg. (It’s used by the bdist_egg, test, and develop commands.)

• Enhanced the test command so that it doesn’t install the package, but instead builds any C extensions in-place, updates the .egg-info metadata, adds the source directory to sys.path, and runs the tests directly on the source. This avoids an “unmanaged” installation of the package to site-packages or elsewhere.

• Made easy_install a standard setuptools command, moving it from the easy_install module to setuptools.command.easy_install. Note that if you were importing or extending it, you must now change your imports accordingly. easy_install.py is still installed as a script, but not as a module.

0.5a4

• Setup scripts using setuptools can now list their dependencies directly in the setup.py file, without having to manually create a depends.txt file. The install_requires and extras_require arguments to setup() are used to create a dependencies file automatically. If you are manually creating depends.txt right now, please switch to using these setup arguments as soon as practical, because depends.txt support will be removed in the 0.6 release cycle. For documentation on the new arguments, see the setuptools.dist.Distribution class.

• Setup scripts using setuptools now always install using easy_install internally, for ease of uninstallation and upgrading.

0.5a1

• Added support for “self-installation” bootstrapping. Packages can now include ez_setup.py in their source distribution, and add the following to their setup.py, in order to automatically bootstrap installation of setuptools as part of their setup process:

  from ez_setup import use_setuptools
  use_setuptools()
  
  from setuptools import setup
  # etc...

0.4a2

• Added ez_setup.py installer/bootstrap script to make initial setuptools installation easier, and to allow distributions using setuptools to avoid having to include setuptools in their source distribution.

• All downloads are now managed by the PackageIndex class (which is now subclassable and replaceable), so that embedders can more easily override download logic, give download progress reports, etc. The class has also been moved to the new setuptools.package_index module.

• The Installer class no longer handles downloading, manages a temporary directory, or tracks the zip_ok option. Downloading is now handled by PackageIndex, and Installer has become an easy_install command class based on setuptools.Command.

• There is a new setuptools.sandbox.run_setup() API to invoke a setup script in a directory sandbox, and a new setuptools.archive_util module with an unpack_archive() API. These were split out of EasyInstall to allow reuse by other tools and applications.

• setuptools.Command now supports reinitializing commands using keyword arguments to set/reset options. Also, Command subclasses can now set their command_consumes_arguments attribute to True in order to receive an args option containing the rest of the command line.

0.3a2

• Added new options to bdist_egg to allow tagging the egg’s version number with a subversion revision number, the current date, or an explicit tag value. Run setup.py bdist_egg --help to get more information.

• Misc. bug fixes

0.3a1

• Initial release.