Edit Jira issues as text files locally.
Project description
Pronounced like ‘giraffes’, but totally unrelated to wildlife, this library lets you stay out of JIRA as much as possible by letting you edit your JIRA issues as text files using an interface modeled off of git.
Getting Started
Installation
It is recommended that you install the program using pip while in a Python 3 virtualenv; you can install using pip by running:
pip install jirafs
After the program successfully installs, you’ll have access to the jirafs command that you can use for both downloading attachments and files from JIRA as well as updating issues and adding comments.
Cloning a JIRA issue
You’ll need to have a local copy of the JIRA issues you’d like to edit before you can update the contents of issues, so you will want to find a place that you can “clone” (create a text-file based copy of) the issue you’re concerned about, then run the following (replacing MYISSUE-1024 with the issue number you are concerned about):
jirafs clone MYISSUE-1024
The first time you run this command, it will ask you for a series of details that it will use for communicating with JIRA; don’t worry: although all of this information will be stored in plaintext at ~/.jirafs_config, Jirafs will not store your password unless you give it permission to do so.
Once the command runs successfully, it will create a new folder named after the issue you’ve cloned, and inside that folder it will place a series of text files and copies of all attachments currently attached to the issue in JIRA.
The following text files are created:
fields.jira: This file will show all currently-set field values for this JIRA issue (except fields written to their own files; see description.jira below). You can change field values here by editing the field values in the file, but this functionality has only been tested for fields storing text data.
description.jira: This file will show the issue’s current description. You can change the issue’s description by editing the contents of this file.
comments.read_only.jira: This file shows all comments currently posted to this issue. Note that you cannot edit the comments in this file.
new_comment.jira: This file starts out empty, but if you would like to add a new comment, simply enter some text into this file.
In order to update any of the above data or upload an asset, either make the change to a field in fields.jira, edit the issue’s description in description.jira, write a comment into new_comment.jira, or copy a new asset into this folder, then run:
jirafs commit
from within the folder jirafs created earlier.
Running this command will mark the changes you’ve made as ready for submission to JIRA. At any time, you can run:
jirafs status
to see both what changes you’ve marked as ready for being submitted to JIRA as well as which changes you have made, but not yet committed.
Once you’re satisfied with the changes that are about to be submitted to JIRA, run:
jirafs push
Please keep in mind that updates that others have made in JIRA outside of Jirafs won’t be available in your local copy until you pull them in by running:
jirafs pull
Please consider the above to be just a simple overview – there are a variety of other commands you can run to have finer-grained control over how the issue folder is synchronized with JIRA; see Commands for more details.
Configuration
Settings affecting all issues are set in the following files:
~/.jirafs_config: Global configuration values affecting all issues.
~/.jirafs_ignore: Global list of patterns to ignore when looking through issue directories for files to upload to JIRA. See Ignore File Format for details.
~/.jirafs_remote_ignore: A list of patterns to ignore when looking through files attached to a JIRA issue. Files matching any of these patterns will not be downloaded. See Ignore File Format for details.
You may also add any of the below files into any issue directory (in this example, MYISSUE-1024):
MYISSUE-1024/.jirafs_ignore: A list of patterns to ignore when looking through this specific issue directory. This list of patterns is in addition to patterns entered into ~/.jirafs_ignore above. See Ignore File Format for details.
MYISSUE-1024/.jirafs_remote_ignore: A list of patterns to ignore when looking through files attached to this specific JIRA issue. Files matching any of these patterns will not be downloaded. These patterns are in addition to the patterns entered into ~/.jirafs_remote_ignore above. See Ignore File Format for details.
Commands
clone MYISSUE-1024
Possible forms include:
clone http://my.jira.server/browse/MYISSUE-1024 [PATH]
clone MYISSUE-1024 [PATH] (will use default JIRA instance)
Create a new issue folder for MYISSUE-1024 (replace MYISSUE-1024 with an actual JIRA issue number), and clone the relevant issue into this folder.
Note that you may specify a full URL pointing to an issue, but if you do not specify a full URL, your default JIRA instance will be used; if you have not yet set one, you will be asked to specify one.
Although by default, the issue will be cloned into a folder matching the name of the issue, you may specify a path into which the issue should be cloned.
commit
From within an issue folder, commits local changes and marks them for submission to JIRA next time push is run.
pull *
From within an issue folder, fetches remote changes from JIRA and merges the changes into your local copy. This command is identical to running fetch followed by merge.
push *
From within an issue folder, discovers any local changes, and pushes your local changes to JIRA.
status *
From within an issue folder, will report both any changes you have not yet committed, as well as any changes that would take place were you to run jirafs push.
open *
From within an issue folder, opens the current JIRA issue in your default web browser.
Advanced Commands
You will probably not have a need to use the below commands, but they are available for adventurous users.
fetch
Fetch upstream changes from JIRA, but do not apply them to your local copy. To apply the fetched changes to your local copy, run merge.
merge
From within an issue folder, merges previously-fetched but unmerged changes into your local copy.
init
From within a folder named after an issue, converts the existing folder into a Jirafs issue folder. This can be useful if you have already been storing issue-specific files on your filesystem.
diff
From within an issue folder, will display any local changes that you have made.
log
From within an issue folder, will print out the log file recording actions Jirafs has performed for this ticket folder.
git
From within an issue folder, will provide direct access to this issue folder’s internal git repository. This interface is not intended for non-developer use; please make sure you know what you’re doing before performing git operations directly.
debug
From within an issue folder, will open up a python shell having access to a variable named folder holding the Python object representing the ticket folder you are currently within.
Interesting Details
Ignore File Format
The files .jirafs_ignore and .jirafs_remote_ignore use a subset of the globbing functionality supported by git’s gitignore file syntax. Specifically, you can have comments, blank lines, and globbing patterns of files that you would not like to upload.
For example, if you’d like to ignore files having a .diff extension, and would like to add a comment indicating why those are ignored, you could enter the following into any *_ignore file:
# Hide diffs I've generated for posting to reviewboard *.diff
Directory Structure
Each issue folder includes a hidden folder named .jirafs that stores metadata used by Jirafs for this issue. There may be many things in this folder, but two highlights include the following files/folders:
git: The issue folder is tracked by a git repository to enable future features, provide for a way of easily rolling-back or reviewing an issue’s previous state.
operation.log: This file logs all operations engaged in on this specific issue folder. You can review this log to see what jirafs has done in the past.
VIM Plugin
If you’re a vim user, I recommend you install my fork of the confluencewiki.vim plugin; if you do so, comment and description field files will use JIRA/Confluence’s WikiMarkup for syntax highlighting.
Release history Release notifications | RSS feed
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
