Skip to main content

zc.buildout recipes to compile and install software or python packages and generate scripts or configuration files sponsored by Makina Corpus.

Project description

Introduction

Please look for options at http://pypi.python.org/pypi/minitage.recipe.common

The egg has those entry point:

  • cmmi: install configure/make/make install softwares

The reasons why i have rewrite yet another buildout recipes builder are:

  • Support for downloading stuff

  • Support on the fly patchs for eggs and other distribution.

  • Support multiple hooks at each stage of the build system.

  • Robust offline mode

  • support automaticly minitage dependencies and rpath linking.

You can browse the code on minitage’s following resources:

You can migrate your buldouts without any effort with buildout.minitagificator:

Makina Corpus sponsored software

makinacom

minitage.recipe.cmmi

Abstract

  • The cmmi recipe use abusivly or -rpath to save you from settings LD_LIBRARY_PATH at run time.

  • If you are inside a minitage environment, all the dependencies of your minibuild are put in the environment. That mean that CFLAGS, LDFLAGS, PKG_CONFIG_PATH, and so on are updated to reference your minibuild’s dependencies.

  • minitage.recipe.cmmi is a replacment fo zc.recipe.cmmi.

  • It intends to do the configure && make && make install dance with hooks where you can do (in python) specific stuff at each stage of the build cursus.

  • With this recipe, if the destination directory exists, we only remove it when we can sucessfully install something, unless that we never touch to it, or it is a bug.

  • LOOK ALSO AT THE SHARED VARIABLES AS ALL THE MINITAGE RECIPES SHARE A LOT OF VARIABLES

Specific options

Please look for options at : http://pypi.python.org/pypi/minitage.recipe.common#options-shared-by-all-the-recipes

  • make-targets(-UNAME)

    default to all and install, make targets to run

  • inner-dir: change to inner directory before doing anything.

  • prefix: where to install (defaults to options:location) Be warn that the content of the destination will be wiped before unless you set ‘install-in-place’

  • install-in-place: install over a previous installation instead of removing the older install replacing it with the new ‘makeinstall result’:

    install-in-place=True
  • build-dir(-UNAME)

    inner directory to execute the build dance [see cmmi recipe for documentation]

  • configure-options(-UNAME)

    Os specific options to give to configure uname can be either linux2|freebsd6|freebsd7|darwin|leopard|snowleopard (darwin for both leopard) Its the result of sys.platform.lower() [see cmmi recipe for documentation]

  • configure(-UNAME)
    • specific OS configure script to use (darwin, leopard, snowleopard, linux, freebsd, freebsd(6,7,8) configure script to use (default to ./configure)

  • prefix-separator [see cmmi recipe for documentation]

    prefix separator to use between –prefix and location (default to =)

  • prefix-option [see cmmi recipe for documentation]

    what to put for the “prefix” expression, default to –prefix$PREFIX_SEPARATOR$LOCATION

  • autogen

    autogen script to use if any [optionnal]

  • configure-options(-UNAME)

    options to feed configure with [see cmmi recipe for documentation]

  • configure-options(-UNAME)-replace
    • overide options for a specific OS

  • extra_options

    appendended to configure-options [see cmmi recipe for documentation]

  • mingw

    For windows/cygwin use only Set this variable (mingw=true for example) to use mingw compiler Default will search for a mingw installation in /minitageprefix/mingw

  • mingw-path

    Alternative path for mingw installation

  • noconfigure(-UNAME)

    do not run ./configure

  • nomake(-UNAME)

    do not run make

  • noinstall(-UNAME)

    do not run make install

  • make-options(-UNAME)

    options to prepent betwenn make and the target (eg MAKE

  • make-install-append-options(-UNAME)

    if set, instead of prepending option before target, we will append them at install time

  • make-install-options(-UNAME)

    options to append after the install targets (eg make install DESDIR=foo)

  • hooks

    A hook is in the form /path/to/hook:CALLABLE:

    myhook=${buildout:directory}/toto.py:foo

    Where we have toto.py:

    def foo(options, buildout):
        return 'Hourray'

    The complete possible hooks list:

    • pre-unpack-hook

      hook executed before the unpack dance

    • post-unpack-hook

      hook executed after the unpack dance

    • post-unpack-hook

      hook executed after the unpack dance

    • pre-configure-hook

      hook executed before the configure is run

    • pre-make-hook

      hook executed before the first make target is run

    • post-build-hook

      hook executed after the build make targets are done

    • pending-make-install

      hook executed after the make and before the make install is done.

    • post-make-hook

      hook executed after the make install is done

Detailled documentation

Let’s create a buildout configuration file.

>>> rmdir(tempdir)
>>> mkdir(tempdir)
>>> cd(tempdir)
>>> a = [mkdir(d) for d in ('eggs', 'develop-eggs', 'bin', 'src')]
>>> install_develop_eggs(['minitage.recipe.cmmi'])
>>> install_eggs_from_pathes(['zc.buildout'], sys.path)
>>> touch('buildout.cfg')
>>> sh('buildout -o bootstrap')
buildout -o bootstrap...

This first buildout is classical, trying to build some url.

>>> touch('buildout.cfg',
... data="""
... [buildout]
... download-cache=${buildout:directory}
... parts =
...     part
... [part]
... recipe=minitage.recipe.cmmi
... """)
>>> sh('bin/buildout install part')
bin/buildout install part...
<BLANKLINE>
While:
  Installing part.
<BLANKLINE>
A...
MinimergeError: URL was not set!
<BLANKLINE>

Oups, we forgot the url, we will make a basic distribution package to test our stuff Running the buildout with the url bit.

>>> if not os.path.exists('foo'):
...     mkdir('foo')
... else:
...     rmdir(foo)
...     mkdir('foo')
>>> touch('foo/configure', data ="""echo configure $@\n""")
>>> sh('chmod +x foo/configure')
c...
>>> touch('foo/Makefile',
... data = """
... all:
... \t@echo all
...
... install:
... \t@echo install
...
... """)
>>> sh('tar cfz  foo.tgz foo')
tar cfz  ...
<BLANKLINE>
>>> data = """
... [buildout]
... download-cache=${buildout:directory}
... parts =
...     part
... [part]
... recipe=minitage.recipe.cmmi
... url = file://${buildout:directory}/foo.tgz
... """
>>> touch('buildout.cfg', data=data)
>>> sh('bin/buildout -o install part')
bin/buildout -o install part...
Installing part.
minitage.recipe: Download archive
minitage.recipe: Downloading file:///tmp/buildout.test/foo.tgz in /tmp/buildout.test/minitage/foo.tgz
minitage.recipe: Unpacking in /tmp/buildout.test/__minitage__part__tmp.
minitage.recipe: Guessing compilation directory
minitage.recipe: Setting path
minitage.recipe: Setting pkgconfigpath
minitage.recipe: Setting compilation flags
minitage.recipe: Setting path
minitage.recipe: Running /tmp/buildout.test/__minitage__part__tmp/foo/configure --prefix=/tmp/buildout.test/parts/part
configure --prefix=/tmp/buildout.test/parts/part
minitage.recipe: Running make
all
minitage.recipe: Running make  install
install
minitage.recipe: Completed install...

General usage

This first buildout does nothing except print us the hooks calls. We have desactivated the configure and make dance!.

>>> data = """
... [buildout]
... download-cache=${buildout:directory}
... parts =
...     part
... [part]
... recipe=minitage.recipe.cmmi
... url = file://${buildout:directory}/foo.tgz
... noconfigure=true
... noinstall = true
... nomake = true
... """
>>> touch('buildout.cfg', data=data)
>>> sh('bin/buildout -o install part')
bin/buildout -o install part...
Installing part.
minitage.recipe: Download archive
minitage.recipe: Unpacking in /tmp/buildout.test/__minitage__part__tmp.
minitage.recipe: Guessing compilation directory
minitage.recipe: Setting path
minitage.recipe: Setting pkgconfigpath
minitage.recipe: Setting compilation flags
minitage.recipe: Setting path
minitage.recipe: Completed install...

Applying patches

This second one aimes to show us the patch capababilities.

>>> sh('cp foo/Makefile foo/Makefile.old')
cp foo/Makefile foo/Makefile.old
>>> sh('echo >> foo/Makefile')
echo >> foo/Makefile
>>> sh('diff -u foo/Makefile.old foo/Makefile > patch')
diff -u foo/Makefile.old foo/Makefile > patch
>>> data = """
... [buildout]
... download-cache=${buildout:directory}
... parts =
...     part
... [part]
... recipe=minitage.recipe.cmmi
... url = file://${buildout:directory}/foo.tgz
... patches = ${buildout:directory}/patch
... noconfigure=true
... noinstall = true
... nomake = true
... """
>>> touch('buildout.cfg', data=data)
>>> sh('bin/buildout -o install part')
bin/buildout -o install part...
minitage.recipe: Running patch -t -Np0 < /tmp/buildout.test/minitage/patch_d96115b00b41e282469f73708c68bdaf/patch
can't find file to patch at input line 3
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|--- foo/Makefile.old ...
|+++ foo/Makefile  ...
--------------------------
No file to patch.  Skipping patch.
1 out of 1 hunk ignored
<BLANKLINE>
While:
  Installing part.
<BLANKLINE>
An internal error occured due to a bug in either zc.buildout or in a...
SystemError: ('Failed', 'patch -t -Np0 < /tmp/buildout.test/minitage/patch_d96115b00b41e282469f73708c68bdaf/patch')
<BLANKLINE>

The patch level is wrong !

>>> data = """
... [buildout]
... download-cache=${buildout:directory}
... parts =
...     part
... [part]
... recipe=minitage.recipe.cmmi
... url = file://${buildout:directory}/foo.tgz
... patches = ${buildout:directory}/patch
... patch-options = -p1
... noconfigure=true
... noinstall = true
... nomake = true
... """
>>> touch('buildout.cfg', data=data)
>>> sh('bin/buildout -o install part')
bin/buildout -o install part...
minitage.recipe: Running patch -t -p1 < /tmp/buildout.test/minitage/patch...
patching file Makefile
minitage.recipe: Completed install...

Using hooks

But now that we have some sort of messy packages, can we not intercale some python to code to arrange things upside down ? We have hooks to achieve that. A hook is a python callable which takes at least the options part and the buildout.

>>> data = """
... [buildout]
... download-cache=${buildout:directory}
... parts =
...     part
... [part]
... recipe=minitage.recipe.cmmi
... url = file://${buildout:directory}/foo.tgz
... pre-unpack-hook    = ${buildout:directory}/hooks.py:pre_unpack_hook
... post-unpack-hook   = ${buildout:directory}/hooks.py:post_unpack_hook
... pre-configure-hook = ${buildout:directory}/hooks.py:pre_configure_hook
... pre-make-hook      = ${buildout:directory}/hooks.py:pre_make_hook
... post-build-hook    = ${buildout:directory}/hooks.py:post_build_hook
... post-make-hook     = ${buildout:directory}/hooks.py:post_make_hook
... """
>>> touch('hooks.py', data="""
... def  pre_unpack_hook    (o, b, hook='pre_unpack_hook'):
...     print "%s in %s target %s" % (hook, b['buildout']['directory'], o['location'])
... def  post_unpack_hook   (o, b, hook='post_unpack_hook'):
...     print "%s in %s target %s" % (hook, b['buildout']['directory'], o['location'])
... def  pre_configure_hook (o, b, hook='pre_configure_hook'):
...     print "%s in %s target %s" % (hook, b['buildout']['directory'], o['location'])
... def  pre_make_hook      (o, b, hook='pre_make_hook'):
...     print "%s in %s target %s" % (hook, b['buildout']['directory'], o['location'])
... def  post_build_hook    (o, b, hook='post_build_hook'):
...     print "%s in %s target %s" % (hook, b['buildout']['directory'], o['location'])
... def  post_make_hook     (o, b, hook='post_make_hook'):
...     print "%s in %s target %s" % (hook, b['buildout']['directory'], o['location'])
... """)
>>> touch('buildout.cfg', data=data)
>>> sh('bin/buildout -o install part')
... bin/buildout -o install part...
bin/buildout -o install part...
minitage.recipe: Download archive
minitage.recipe: Executing pre-unpack-hook
pre_unpack_hook in /tmp/buildout.test target /tmp/buildout.test/parts/part...
minitage.recipe: Setting path
minitage.recipe: Executing post-unpack-hook
post_unpack_hook in /tmp/buildout.test target /tmp/buildout.test/parts/part
minitage.recipe: Executing pre-configure-hook
pre_configure_hook in /tmp/buildout.test target /tmp/buildout.test/parts/part
minitage.recipe: Running /tmp/buildout.test/__minitage__part__tmp/foo/configure --prefix=/tmp/buildout.test/parts/part
configure --prefix=/tmp/buildout.test/parts/part
minitage.recipe: Executing pre-make-hook
pre_make_hook in /tmp/buildout.test target /tmp/buildout.test/parts/part
minitage.recipe: Running make
all
minitage.recipe: Executing post-build-hook
post_build_hook in /tmp/buildout.test target /tmp/buildout.test/parts/part
minitage.recipe: Running make  install
install
minitage.recipe: Executing post-make-hook
post_make_hook in /tmp/buildout.test target /tmp/buildout.test/parts/part
minitage.recipe: Completed install...

MD5 check

Can we check md5, of course! As we have already the foo package in our download cache, we try to download something else.

>>> shutil.copy2('foo.tgz', 'bar.tgz')
>>> data = """
... [buildout]
... download-cache=${buildout:directory}
... parts =
...     part
... [part]
... recipe=minitage.recipe.cmmi
... md5sum = b4d
... url = file://${buildout:directory}/bar.tgz
... """
>>> touch('buildout.cfg', data=data)
>>> sh('bin/buildout -o install part')
bin/buildout -o install part
Uninstalling part.
Unused options for buildout: 'download-directory'.
Installing part.
minitage.recipe: Download archive
minitage.recipe: Downloading file:///tmp/buildout.test/bar.tgz in /tmp/buildout.test/minitage/bar.tgz
<BLANKLINE>
While:
  Installing part.
<BLANKLINE>
A...
MinimergeError: Failed download for file:///tmp/buildout.test/bar.tgz:      MD5SUM mismatch for /tmp/buildout.test/minitage/bar.tgz: Good:b4d != Bad:...
<BLANKLINE>

Controlling configure

Giving configure options the two possible ways.

>>> data = """
... [buildout]
... download-cache=${buildout:directory}
... parts =
...     part
... [part]
... recipe=minitage.recipe.cmmi
... url = file://${buildout:directory}/bar.tgz
... configure-options = foo
... extra_options = bar
... """
>>> touch('buildout.cfg', data=data)
>>> sh('bin/buildout -o install part')
bin/buildout -o install part...
minitage.recipe: Running /tmp/buildout.test/__minitage__part__tmp/foo/configure --prefix=/tmp/buildout.test/parts/part foo bar
configure --prefix=/tmp/buildout.test/parts/part foo bar ...

Use OS Specific rules

Giving os specific rules.

>>> data = """
... [buildout]
... download-cache=${buildout:directory}
... parts =
...     part
... [part]
... recipe=minitage.recipe.cmmi
... url = file://${buildout:directory}/foo.tgz
... configure-options-linux = linuxoptions
... """
>>> touch('buildout.cfg', data=data)
>>> sh('bin/buildout -o install part')
b...
minitage.recipe: Running /tmp/buildout.test/__minitage__part__tmp/foo/configure --prefix=/tmp/buildout.test/parts/part    linuxoptions...

Or, in the same manner, you can specify OS specific patches: (darwin, linux, freebsd6, freebsd7). sys.platform is your friend :) (‘linux’, for all linuxes).

>>> data = """
... [buildout]
... download-cache=${buildout:directory}
... parts =
...     part
... [part]
... recipe=minitage.recipe.cmmi
... patch-options = -p1
... url = file://${buildout:directory}/foo.tgz
... """
>>> data += '%s-patches =${buildout:directory}/patch' % uname
>>> touch('buildout.cfg', data=data)
>>> sh('bin/buildout -o install part')
b...
minitage.recipe: Running patch -t -p1 < /tmp/buildout.test/minitage/patch...

Using underlying minitage environment

If you are in a minitage, all your minibuild dependencies come automaticly in the env, no need to do the following code :) As you can have CFLAGS and so on added to your env., you can specify manual things too, the underlying code is the same. The goal is to proove that all is preprended as we would have think. We will use some hook to print the relevant parts.

>>> data = """
... [buildout]
... download-cache=${buildout:directory}
... parts =
...     part
... [part]
... recipe=minitage.recipe.cmmi
... url = file://${buildout:directory}/foo.tgz
... pre-make-hook    = ${buildout:directory}/hooks.py:pre_unpack_hook
... includes-dirs = /foo/include
... rpath = /someruntimespath/lib
... library-dirs = /bar/lib
... pkgconfigpath = /lib/pkgconfig/
... noconfigure = true
... nomake = true
... noinstall = true
... """
>>> touch('hooks.py', data="""
... import os
... def  pre_unpack_hook(o, b):
...     flags = [(a, os.environ.get(a, 'not_set')) for a in ('CFLAGS', 'LDFLAGS', 'PKG_CONFIG_PATH', 'LD_RUN_PATH',)]
...     for flag in flags:
...         print flag
... """)
>>> touch('buildout.cfg', data=data)
>>> sh('bin/buildout -o install part')
b...
minitage.recipe: Executing pre-make-hook
('CFLAGS', '-I/foo/include')
('LDFLAGS', '-L/bar/lib -Wl,-rpath -Wl,/bar/lib -L/tmp/buildout.test/parts/part/lib -Wl,-rpath -Wl,/tmp/buildout.test/parts/part/lib')
('PKG_CONFIG_PATH', '/lib/pkgconfig/...')
('LD_RUN_PATH', '/someruntimespath/lib:/tmp/buildout.test/parts/part/lib')...

Playing with the environment

You can play also with the environment directly in two ways.

  • Precising a buildout part

    >>> data = """
    ... [buildout]
    ... download-cache=${buildout:directory}
    ... parts =
    ...     part
    ... [foo]
    ... CFLAGS=bar
    ... [part]
    ... recipe=minitage.recipe.cmmi
    ... url = file://${buildout:directory}/foo.tgz
    ... pre-make-hook    = ${buildout:directory}/hooks.py:pre_unpack_hook
    ... environment = foo
    ... noconfigure = true
    ... nomake = true
    ... noinstall = true
    ... """
    >>> touch('buildout.cfg', data=data)
    >>> sh('bin/buildout -o install part')
    bi...
    ('CFLAGS', 'bar')...
    
  • Entering an option formed by key=value pair

    >>> data = """
    ... [buildout]
    ... download-cache=${buildout:directory}
    ... parts =
    ...     part
    ... [part]
    ... recipe=minitage.recipe.cmmi
    ... url = file://${buildout:directory}/foo.tgz
    ... pre-make-hook    = ${buildout:directory}/hooks.py:pre_unpack_hook
    ... noconfigure = true
    ... nomake = true
    ... noinstall = true
    ... environment=
    ...     CFLAGS=myvalue
    ... """
    >>> touch('buildout.cfg', data=data)
    >>> sh('bin/buildout -o install part')
     bin/buildout -o install part...
     minitage.recipe: Executing pre-make-hook
     ('CFLAGS', 'myvalue')...
    

Autogen can be your friend

It is possible to autogenerate the configure files.

>>> data = """
... [buildout]
... download-cache=${buildout:directory}
... parts =
...     part
... [part]
... recipe=minitage.recipe.cmmi
... url = file://${buildout:directory}/foo.tgz
... noconfigure = true
... nomake = true
... noinstall = true
... autogen = configure
... """
>>> touch('buildout.cfg', data=data)
>>> sh('bin/buildout -o install part')
bin/buildout -o install part...
minitage.recipe: Auto generating configure files
minitage.recipe: Running /tmp/buildout.test/__minitage__part__tmp/foo/configure
configure...

shared builds

Handling shared mode as a backward compatibility with zc.recipe.cmmi.

>>> data = """
... [buildout]
... download-cache=${buildout:directory}
... parts =
...     part
... [part]
... recipe=minitage.recipe.cmmi
... url = file://${buildout:directory}/foo.tgz
... shared = true
... """
>>> touch('buildout.cfg', data=data)
>>> sh('bin/buildout -o install part')
bin/buildout -o install part...
minitage.recipe: Running /tmp/buildout.test/__minitage__part__tmp/foo/configure --prefix=/tmp/buildout.test/minitage/cmmi/...

CHANGELOG

1.58 (2013-06-02)

  • gmake can be make on OSX

1.57 (2013-02-25)

  • bugfix: create tmp dir

1.56 (2012-12-19)

  • fix doc, again

1.55 (2012-12-19)

  • fix doc

1.54 (2012-05-09)

  • use cache subdirs for download files

1.53 (2011-03-09)

  • conditionnaly remove la files

1.52 (2011-03-09)

  • add a ‘make-install-append-options’ to add after make install targets the ‘make-options’ buildout option.

  • add a ‘make-install-options’ to add after make install targets

  • add a debug stop flag

  • add env file generation for debug

  • add per os options

  • fix develop link

  • win32 fix

  • Remove la files if present

1.37

  • API FIX

-> 1.36

  • splitted out from minitage.recipe

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

minitage.recipe.cmmi-1.58.zip (32.8 kB view details)

Uploaded Source

File details

Details for the file minitage.recipe.cmmi-1.58.zip.

File metadata

File hashes

Hashes for minitage.recipe.cmmi-1.58.zip
Algorithm Hash digest
SHA256 217f3272476cf4fc01839753d1997e039ccc160f5957d345c0d303df4c3e2816
MD5 fcd552ef0a5e79c913cc9c443c1e64bb
BLAKE2b-256 c30d64769077b030262b1bb22fcafe76a1f874b9f604f3053d00bfac8587ec32

See more details on using hashes here.

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page