networking-fujitsu 1.0.0

How to Install

1. Install the package:

   $ pip install networking-fujitsu

2. Add fujitsu_cfab to mechanism_drivers option in /etc/neutron/plugins/ml2/ml2_conf.ini, for example:

   mechanism_drivers = openvswitch,fujitsu_cfab

3. Modify ml2_conf_fujitsu.ini and make neutron-server to read it.

   For RedHat, add the following options in ExecStart in /usr/lib/systemd/system/neutron-server.service:

   --config-file /etc/neutron/plugins/ml2/ml2_conf_fujitsu.ini

   For Ubuntu, add the following line to /etc/default/neutron-server:

   NEUTRON_PLUGIN_ML2_CONFIG="/etc/neutron/plugins/ml2/ml2_conf_fujitsu.ini"

   and add the following line before ‘exec start-stop-daemon …’ in /etc/init/neutron-server.conf:

   [ -r "$NEUTRON_PLUGIN_ML2_CONFIG" ] && CONF_ARG="${CONF_ARG} --config-file $NEUTRON_PLUGIN_ML2_CONFIG"

Configuration

Only VLAN network type is supported (ie. both type_drivers and tenant_network_types in [ml2] section of configuration files should be vlan).

The following parameters can be specified in [fujitsu_cfab] section of configuration files (such as ml2_conf_fujitsu.ini).

address

The IP address or the host name of the C-Fabric to connect to using telnet protocol. This is a mandatory parameter and it has no default value. Only one address can be specified.

Example:

address = 192.168.0.1

username

The C-Fabric username to use. Please note that the user must have administrator rights to configure C-Fabric. The default value is admin.

Example:

username = admin

password

The C-Fabric password to use. The default value is admin.

Example:

password = admin

physical_networks

List of <physical_network>:<vfab_id> tuples specifying physical network names and corresponding vfab IDs. All possible physical network names must be specified in this parameter. If a physical network name not specified in this parameter is used, a runtime exception will be raised. It is valid to use same vfab ID for different physical networks as long as VLAN IDs are exclusive. Please note that vfabs must be created and configured in C-Fabric beforehand.

Example:

physical_networks = physnet1:1,physnet2:2

share_pprofile

Whether to share a C-Fabric pprofile among Neutron ports using the same VLAN ID. If it is true, the pprofile name will be based on the VLAN ID, and the pprofile will be used for all Neutron ports using the same VLAN ID. If it is false, the pprofile name will be based on the MAC address, and each Neutron port will use dedicated pprofile. The default value is False.

Example:

share_pprofile = True

pprofile_prefix

The prefix string for pprofile names. The pprofile name will be “<pprofile_prefix> + <vlan_id>” or “<pprofile_prefix> + <MAC_address>” according to the share_pprofile parameter. If pprofile_prefix is specified, the mechanism driver will not use the existing pprofiles which do not have the prefix. If pprofile_prefix is not specified, the mechanism driver will use the existing pprofile if it corresponds to the VLAN ID when share_pprofile is true, or if the name ends with the MAC address when share_pprofile is false.

Example:

pprofile_prefix = neutron-

save_config

Whether to save configuration. If it is true, C-Fabric’s configuration will be saved every time the configuration is committed. The default value is True.

Example:

save_config = False

C-Fabric Configuration

As well as the standard configuration of C-Fabric, the following configurations are needed for the mechanism driver.

1. Enable AMPP using ARP/DHCP.

   By default, only RARP packets are examined for AMPP. It is possible to add ARP/DHCP packets to be examined for AMPP.

   Example:

   evb ampp arp on
   evb ampp dhcp on

   Please note that evb ampp dhcp is not supported in earlier versions of C-Fabric firmware. Therefore, please create the subnet with enable_dhcp is FALSE before ampp dhcp function is supported.

2. Create and configure vfabs.

   It is necessary to create and configure the vfab beforehand. It is recommended that the ports connected to the network nodes are configured as VLAN through mode.

   Example:

   ifgroup 0 ether 1/1/0/1-1/1/0/18
   ifgroup 1 ether 1/1/0/19-1/1/0/26
   ifgroup 2 ether 1/2/0/1
   vfab 1 cir-ports ifgroup 1
   vfab 1 ampp-area 0
   vfab 1 through ifgroup 2
   interface 1/2/0/1
       vfab through mode on

   Please note that vfab through commands are only available on C-Fabric firmware V02.30 and later.