nonos

nonos is a 2D visualization command line application for planet-disk hydro simulations, as well as a Python library. It works seamlessly with vtu-formatted data from Pluto, Fargo3D and Idefix.

:construction: This project and documentation are under construction :construction:

Ongoing progress

• spherical coordinates
• error: streamlines & rz=True -> not yet implemented
• warning: isPlanet=False & corotate=True -> we don't rotate the grid if there is no planet for now. omegagrid = 0.
• warning: geometry="polar" & rz=True -> plot not optimized for now in the (R,z) plane in polar.

Installation

:warning: Nonos requires Python 3.8 or newer. The easiest installation method is

$ pip install nonos

Usage

1. On the command line

The nonos CLI gets its parameters from three sources:

• command line parameters
• a configuration file
• default values

Command line parameters take priority over the configuration file, which itself takes priority over default values.

To get help, run

$ nonos --help

usage: nonos [-h] [-dir DATADIR] [-field {RHO,VX1,VX2,VX3}] [-vmin VMIN]
             [-vmax VMAX] [-cpu NCPU] [-on ON [ON ...] | -all] [-diff] [-log]
             [-isp] [-corotate] [-grid] [-streamlines] [-rz] [-noavr] [-pbar]
             [-stype {random,fixed,lic}] [-srmin RMINSTREAM]
             [-srmax RMAXSTREAM] [-sn NSTREAMLINES]
             [-geom {cartesian,polar} | -pol] [-dim {1,2}] [-ft FONTSIZE]
             [-cmap CMAP] [-fmt FORMAT] [-dpi DPI] [-input INPUT | -isolated]
             [-d | -version | -logo | -config]

Analysis tool for idefix/pluto/fargo3d simulations (in polar coordinates).

optional arguments:
  -h, --help            show this help message and exit
  -dir DATADIR          location of output files and param files (default:
                        '.').
  -field {RHO,VX1,VX2,VX3}
                        name of field to plot (default: 'RHO').
  -vmin VMIN            min value in -diff mode (default: -0.5)
  -vmax VMAX            max value in -diff mode (default: -0.5)
  -cpu NCPU, -ncpu NCPU
                        number of parallel processes (default: 1).
  -on ON [ON ...]       output number(s) (on) to plot. This can be a single
                        value or a range (start, end, [step]) where both ends
                        are inclusive. (default: last output available).
  -all                  save an image for every available snapshot (this will
                        force show=False).
  -geom {cartesian,polar}
  -pol                  shortcut for -geom=polar
  -dim {1,2}            dimensionality in projection: 1 for a line plot, 2
                        (default) for a map.
  -ft FONTSIZE          fontsize in the graph (default: 11).
  -cmap CMAP            choice of colormap for the -dim 2 maps (default:
                        'RdYlBu_r').
  -scaling SCALING      scale the overall sizes of features in the graph (fonts, linewidth...)
                        (default: 1).
  -dpi DPI              image file resolution (default: DEFAULTS['dpi'])

boolean flags:
  -diff                 plot the relative perturbation of the field f, i.e.
                        (f-f0)/f0.
  -log                  plot the log10 of the field f, i.e. log(f).
  -isp                  is there a planet in the grid ?
  -corotate             does the grid corotate? Works in pair with -isp.
  -grid                 show the computational grid.
  -streamlines          plot streamlines.
  -rz                   2D plot in the (R-z) plane (default: represent the
                        midplane).
  -noavr, -noaverage    do not perform averaging along the third dimension.
  -pbar                 display a progress bar

streamlines options:
  -stype {random,fixed,lic}, -streamtype {random,fixed,lic}
                        streamlines method (default: 'unset')
  -srmin RMINSTREAM     minimum radius for streamlines computation (default:
                        0.7).
  -srmax RMAXSTREAM     maximum radius for streamlines computation (default:
                        1.3).
  -sn NSTREAMLINES      number of streamlines (default: 50).

CLI-only options:
  -input INPUT, -i INPUT
                        specify a configuration file.
  -isolated             ignore any existing 'nonos.toml' file.
  -d, -display          open a graphic window with the plot (only works with a
                        single image)
  -version, --version   show raw version number and exit
  -logo                 show Nonos logo with version number, and exit.
  -config               show configuration and exit.
  -v, -verbose, --verbose
                        increase output verbosity (-v: info, -vv: debug).

Using a configuration file

The CLI will read parameters from a local file named nonos.toml if it exists, or any other name specified using the -i/-input parameter. To ignore any existing nonos.toml file, use the -isolated flag.

One way to configure nonos is to use

$ nonos -config

which prints the current configuration to stdout. You can then redirect it to get a working configuration file as

$ nonos -config > nonos.toml

This method can also be used to store a complete configuration file from command line arguments:

$ nonos -ncpu 8 -cmap viridis -rz -diff -vmin=-10 -vmax=+100 -config

As of Nonos 0.2.0, this will print

# Generated with nonos 0.2.0
datadir               =  "."
field                 =  "RHO"
dimensionality        =  2
on                    =  "unset"
diff                  =  true
log                   =  false
vmin                  =  -10.0
vmax                  =  100.0
rz                    =  true
noaverage             =  false
streamtype            =  "unset"
rminStream            =  0.7
rmaxStream            =  1.3
nstreamlines          =  50
progressBar           =  false
grid                  =  false
geometry              =  "cartesian"
isPlanet              =  false
corotate              =  false
ncpu                  =  8
fontsize              =  11
cmap                  =  "viridis"
dpi                   =  200

2. Programmatic usage

We are still working on nonos' api.