Run Go-Ethereum as a subprocess
Project description
PyGeth
Python wrapper around running geth as a subprocess
System Dependency
This library requires the geth executable to be present.
Installation
Installation
pip install py-gethQuickstart
To run geth connected to the mainnet
>>> from geth import LiveGethProcess
>>> geth = LiveGethProcess()
>>> geth.start()Or a private local chain for testing. These require you to give them a name.
>>> from geth import DevGethProcess
>>> geth = DevGethProcess('testing')
>>> geth.start()By default the DevGethProcess sets up test chains in the default datadir used by geth. If you would like to change the location for these test chains, you can specify an alternative base_dir.
>>> geth = DevGethProcess('testing', '/tmp/some-other-base-dir/')
>>> geth.start()Each instance has a few convenient properties.
>>> geth.data_dir
"~/.ethereum"
>>> geth.rpc_port
8545
>>> geth.ipc_path
"~/.ethereum/geth.ipc"
>>> geth.accounts
['0xd3cda913deb6f67967b99d67acdfa1712c293601']
>>> geth.is_alive
False
>>> geth.is_running
False
>>> geth.is_stopped
False
>>> geth.start()
>>> geth.is_alive
True # indicates that the subprocess hasn't exited
>>> geth.is_running
True # indicates that `start()` has been called (but `stop()` hasn't)
>>> geth.is_stopped
False
>>> geth.stop()
>>> geth.is_alive
False
>>> geth.is_running
False
>>> geth.is_stopped
TrueWhen testing it can be nice to see the logging output produced by the geth process. py-geth provides a mixin class that can be used to log the stdout and stderr output to a logfile.
>>> from geth import LoggingMixin, DevGethProcess
>>> class MyGeth(LoggingMixin, DevGethProcess):
... pass
>>> geth = MyGeth()
>>> geth.start()All logs will be written to logfiles in ./logs/ in the current directory.
The underlying geth process can take additional time to open the RPC or IPC connections, as well as to start mining if it needs to generate the DAG. You can use the following interfaces to query whether these are ready.
>>> geth.is_rpc_ready
True
>>> geth.wait_for_rpc(timeout=30) # wait up to 30 seconds for the RPC connection to open
>>> geth.is_ipc_ready
True
>>> geth.wait_for_ipc(timeout=30) # wait up to 30 seconds for the IPC socket to open
>>> geth.is_dag_generated
True
>>> geth.is_mining
True
>>> geth.wait_for_dag(timeout=600) # wait up to 10 minutes for the DAG to generate.
The DAG functionality currently only applies to the DAG for epoch 0.Installing specific versions of geth
This feature is experimental and subject to breaking changes.
Any of the following versions of geth can be installed using py-geth on the listed platforms.
v1.5.6 (linux/osx)
v1.5.7 (linux/osx)
v1.5.8 (linux/osx)
v1.5.9 (linux/osx)
v1.6.0 (linux/osx)
v1.6.1 (linux/osx)
v1.6.2 (linux/osx)
v1.6.3 (linux/osx)
v1.6.4 (linux/osx)
v1.6.5 (linux/osx)
v1.6.6 (linux/osx)
v1.6.7 (linux/osx)
v1.7.0 (linux/osx)
v1.7.2 (linux/osx)
v1.8.1 (linux/osx)
Installation can be done via the command line:
$ python -m geth.install v0.4.12Or from python using the install_geth function.
>>> from geth import install_geth
>>> install_geth('v1.7.0')The installed binary can be found in the $HOME/.py-geth directory, under your home directory. The v1.7.0 binary would be located at $HOME/.py-geth/geth-v1.7.0/bin/geth.
About DevGethProcess
The DevGethProcess is designed to facilitate testing. In that regard, it is preconfigured as follows.
A single account is created and allocated 1 billion ether.
All APIs are enabled on both rpc and ipc interfaces.
Account 0 is unlocked
Networking is configured to not look for or connect to any peers.
The networkid of 1234 is used.
Verbosity is set to 5 (DEBUG)
Mining is enabled with a single thread.
The RPC interface tries to bind to 8545 but will find an open port if this port is not available.
The DevP2P interface tries to bind to 30303 but will find an open port if this port is not available.
Gotchas
If you are running with mining enabled (which is default for DevGethProcess then you will likely need to generate the DAG manually. If you do not, then it will auto-generate the first time you run the process and this takes a while.
To generate it manually:
$ geth makedag 0 ~/.ethashThis is especially important in CI environments like Travis-CI where your process will likely timeout during generation.
Development
Clone the repository and then run:
pip install -e . -r requirements-dev.txtRunning the tests
You can run the tests with:
py.test testsOr you can install tox to run the full test suite.
Releasing
Pandoc is required for transforming the markdown README to the proper format to render correctly on pypi.
For Debian-like systems:
apt install pandoc
Or on OSX:
brew install pandocTo release a new version:
make release bump=$$VERSION_PART_TO_BUMP$$How to bumpversion
The version format for this repo is {major}.{minor}.{patch} for stable, and {major}.{minor}.{patch}-{stage}.{devnum} for unstable (stage can be alpha or beta).
To issue the next version in line, specify which part to bump, like make release bump=minor or make release bump=devnum.
If you are in a beta version, make release bump=stage will switch to a stable.
To issue an unstable version when the current version is stable, specify the new version explicitly, like make release bump="--new-version 4.0.0-alpha.1 devnum"
Release history Release notifications | RSS feed
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
Source Distribution
Built Distribution
File details
Details for the file py-geth-2.2.0.tar.gz.
File metadata
- Download URL: py-geth-2.2.0.tar.gz
- Upload date:
- Size: 22.0 kB
- Tags: Source
- Uploaded using Trusted Publishing? No
- Uploaded via: twine/3.1.1 pkginfo/1.5.0.1 requests/2.22.0 setuptools/38.5.1 requests-toolbelt/0.9.1 tqdm/4.40.0 CPython/3.6.9
File hashes
| Algorithm | Hash digest | |
|---|---|---|
| SHA256 | 4af3d8e07738b2991d755c31d5de2d39231aa43c3ca28b74f44d7a5e9792eaff |
|
| MD5 | b7cd1acabea82e0c711d2d7123a9f2ea |
|
| BLAKE2b-256 | 3e0d37c15e6227846f4bfa839446219c923852ee6b1857277b1f16267fc350e2 |
File details
Details for the file py_geth-2.2.0-py3-none-any.whl.
File metadata
- Download URL: py_geth-2.2.0-py3-none-any.whl
- Upload date:
- Size: 26.2 kB
- Tags: Python 3
- Uploaded using Trusted Publishing? No
- Uploaded via: twine/3.1.1 pkginfo/1.5.0.1 requests/2.22.0 setuptools/38.5.1 requests-toolbelt/0.9.1 tqdm/4.40.0 CPython/3.6.9
File hashes
| Algorithm | Hash digest | |
|---|---|---|
| SHA256 | 96b453af4812a152fc71e5736b3e2b457927c58f72b50716b774aadb136c1d0e |
|
| MD5 | f365bbcb4a3c8e0df925712805019a27 |
|
| BLAKE2b-256 | ac0d58bcd81449f629cd4b964d6da557d18b60091ca0658c99d153edb5cfb3ae |
