Python: Asynchronous client for Salus iT600 devices

For end users

See https://github.com/jvitkauskas/homeassistant_salus to use this in Home Assistant.

About

This package allows you to control and monitor your Salus iT600 smart home devices locally through Salus UG600 universal gateway. Currently heating thermostats, binary sensors, temperature sensors, covers and switches are supported. You have any other devices and would like to contribute - you are welcome to create an issue or submit a pull request.

Installation

pip install pyit600

Usage

• Instantiate the IT600Gateway device with local ip address and EUID of your gateway. You can find EUID written down on the bottom of your gateway (eg. 001E5E0D32906128).
• Status can be polled using the poll_status() command.
• Callbacks to be notified of state updates can be added with the add_climate_update_callback(method) or add_sensor_update_callback(method) method.

Basic example

async with IT600Gateway(host=args.host, euid=args.euid) as gateway:
	await gateway.connect()
	await gateway.poll_status()

	climate_devices = gateway.get_climate_devices()

	print("All climate devices:")
	print(repr(climate_devices))

	for climate_device_id in climate_devices:
		print(f"Climate device {climate_device_id} status:")
		print(repr(climate_devices.get(climate_device_id)))

		print(f"Setting heating device {climate_device_id} temperature to 21 degrees celsius")
		await gateway.set_climate_device_temperature(climate_device_id, 21)

Useful gateway methods

• poll_status()
• get_climate_devices()
• get_climate_device(device_id)
• set_climate_device_preset(device_id, preset)
• set_climate_device_mode(device_id, mode)
• set_climate_device_temperature(device_id, setpoint_celsius)
• get_binary_sensor_devices()
• get_binary_sensor_device(device_id)
• get_switch_devices()
• get_switch_device(device_id)
• turn_on_switch_device(device_id)
• turn_off_switch_device(device_id)
• get_cover_devices()
• get_cover_device(device_id)
• set_cover_position(device_id, position)
• open_cover(device_id)
• close_cover(device_id)
• get_sensor_devices()
• get_sensor_device(device_id)
• get_gateway_device()

Supported devices

These thermostats have been tested:

• HTRP-RF(50)
• TS600
• VS10WRF/VS10BRF
• VS20WRF/VS20BRF
• SQ610RF

These binary sensors have been tested:

• SW600

These binary sensors have not been tested, but may work:

• WLS600
• OS600
• SD600

These temperature sensors have been tested:

• PS600

These switch devices have been tested:

• SPE600
• RS600

These switch devices have not been tested, but may work:

• SR600
• SP600

These cover devices have been tested:

• RS600

Troubleshooting

Check if you have "Local Wifi Mode" enabled:

• Open Smart Home app on your phone
• Sign in
• Double tap your Gateway to open info screen
• Press gear icon to enter configuration
• Scroll down a bit and check if "Disable Local WiFi Mode" is set to "No"
• Scroll all the way down and save settings
• Restart Gateway by unplugging/plugging USB power

Contributing

If you want to help to get your device supported, open GitHub issue and add your device model number and output of main.py program. Be sure to run this program with --debug option.