python-mystrom 1.0.0

Requirements

You need to have Python installed.

• myStrom device (bulb, plug or button)

• The python-mystrom requirements

• Network connection

• Devices connected to your network

Installation

The package is available in the Python Package Index .

$ pip3 install python-mystrom

Plug/switch

At the moment the following endpoints are covered according [https://api.mystrom.ch/](https://api.mystrom.ch/):

• /report: for getting the current state and the power consumption

• /relay: for setting the relay state

You will still be able to use your device with the smartphone application, curl or other tools. The samples below shows how to use the switch with httpie and curl along with python-mystrom.

$ http http://IP_ADDRESS_PLUG/report
HTTP/1.1 200 OK
Content-Length: 39
Content-Type: application/json
Date: Mon, 15 Feb 2016 17:52:21 GMT

{
    "power": 51.630947,
    "relay": true
}

$ curl -X GET http://IP_ADDRESS_PLUG/relay?state=1

Bulb

If the bulb is on then you should be able to retrieve the current state of the bulb.

Browse to http://IP_ADDRESS_BULB/api/v1/device/MAC_ADDRESS_BULB or use a command-line tool.

$ curl -d "color=0;0;100" -d "action=on" http://IP_ADDRESS_BULB/api/v1/device/MAC_ADDRESS_BULB
{
    "5DFF7FAHZ987":         {
            "on": true,
            "color": "0;0;100",
            "mode": "hsv",
            "ramp": 100,
            "notifyurl": ""
        }
}

The bulbs are not able to handle payload formatted as JSON. It’s required to use application/x-www-form-urlencoded. Keep that in mind if something is not working, especially around setting the color with HSV.

If you are planning to use your bulbs with Home Assistant set the bulb to a state from Colors with the app or use the command below.

$ curl -d "color=0;0;100" IP_ADDRESS_BULB/api/v1/device/MAC_ADDRESS_BULB

$ curl -d "color=0;0;100" http://IP_ADDRESS_BULB/api/v1/device/MAC_ADDRESS_BULB

$ curl -d "color=10;100" http://IP_ADDRESS_BULB/api/v1/device/MAC_ADDRESS_BULB

$ curl -d "action=on&ramp=1000&color=00FF0000" http://IP_ADDRESS_BULB/api/v1/device/MAC_ADDRESS_BULB

Button

The buttons can be set with the myStrom app or directly via HTTP requests.

To set the configuration the payload must contains the relevant details for the actions:

$ curl -v -d "single=<url>&double=<url>&long=<url>&touch=<url>" http://IP_ADDRESS_BUTTON/api/v1/device/MAC_ADDRESS_BUTTON

Available actions:

• single: Short push (approx. 1/2 seconds)

• double: 2x sequential short pushes (within 2 seconds)

• long: Long push (approx. 2 seconds)

• touch: Touch of the button’s surface (only affective for the WiFi Button +)

The button is set up to extend the life span of the battery as much as possible. This means that only within the first 3 minutes or when connected to an USB port/USB charger and the battery is not full, the button is able to receive configuration information or publish its details.

mystrom helper tool

The command-line tool mystrom can help to set up the buttons and get the details from bulbs and plugs.

$ mystrom
Usage: mystrom [OPTIONS] COMMAND [ARGS]...

  Simple command-line tool to get and set the values of a myStrom devices.

  This tool can set the targets of a myStrom button for the different
  available actions single, double, long and touch.

Options:
  --version  Show the version and exit.
  --help     Show this message and exit.

Commands:
  bulb    Get and set details of a myStrom bulb.
  button  Get and set details of a myStrom button.
  config  Get and set the configuration of a myStrom...

The examples shows how to get the details of a given bulb.

$ mystrom config read
IP address of the myStrom device: IP_ADDRESS_BULB
MAC address of the device: MAC_ADDRESS_BULB
Read configuration from IP_ADDRESS_BULB
{
   'MAC_ADDRESS_BULB':{
      'type':'rgblamp',
      'battery':False,
      'reachable':True,
      'meshroot':False,
      'on':True,
      'color':'191;90;14',
      'mode':'hsv',
      'ramp':100,
      'power':0.953,
      'fw_version':'2.25'
   }
}

Example usage of the module

The sample below shows how to use this Python module.

import pymystrom

plug = pymystrom.MyStromPlug('IP_ADDRESS_PLUG')

# Preserve state
STATE_ON = plug.get_relay_state()

# Switch relay on if the plug is currently off
if not STATE_ON:
    print("Relay will be switched on")
    plug.set_relay_on()
    # Wait a few seconds to get a reading of the power consumption
    print("Waiting for a couple of seconds...")
    time.sleep(10)

# Get the new state of the switch
print("Relay state:", plug.get_relay_state())
print("Power consumption:", plug.get_consumption())

# Switch relay off if it was off.
if not STATE_ON:
    plug.set_relay_off()

Examples for the bulb can be found in the directory examples.

License

python-mystrom is licensed under MIT, for more details check LICENSE.