reedsolo 1.4.5

A pure-python universal errors-and-erasures Reed-Solomon Codec , based on the wonderful tutorial at wikiversity, written by “Bobmath” and “LRQ3000”.

The code of wikiversity is here consolidated into a nice API with exceptions handling. The algorithm can correct up to 2*e+v <= nsym, where e is the number of errors, v the number of erasures and nsym = n-k = the number of ECC (error correction code) symbols. This means that you can either correct exactly floor(nsym/2) errors, or nsym erasures (errors where you know the position), and a combination of both errors and erasures. The code should work on pretty much any reasonable version of python (2.4-3.7), but I’m only testing on 2.7 and 3.7. Python 3.8 should work except for Cython which is currently incompatible with this version.

The codec has quite reasonable performances if you either use PyPy on the pure-python implementation (reedsolo.py) or either if you compile the Cython extension creedsolo.py (which is about 2x faster than PyPy). You can expect encoding rate of several MB/s.

This library is also thoroughly unit tested so that any encoding/decoding case should be covered.

# Initialization
>>> from reedsolo import RSCodec
>>> rsc = RSCodec(10)  # 10 ecc symbols

# Encoding
>>> rsc.encode([1,2,3,4])
b'\x01\x02\x03\x04,\x9d\x1c+=\xf8h\xfa\x98M'
>>> rsc.encode(bytearray([1,2,3,4]))
bytearray(b'\x01\x02\x03\x04,\x9d\x1c+=\xf8h\xfa\x98M')
>>> rsc.encode(b'hello world')
b'hello world\xed%T\xc4\xfd\xfd\x89\xf3\xa8\xaa'
# Note that chunking is supported transparently to encode any string length.

# Decoding (repairing)
>>> rsc.decode(b'hello world\xed%T\xc4\xfd\xfd\x89\xf3\xa8\xaa')[0]
b'hello world'
>>> rsc.decode(b'heXlo worXd\xed%T\xc4\xfdX\x89\xf3\xa8\xaa')[0]     # 3 errors
b'hello world'
>>> rsc.decode(b'hXXXo worXd\xed%T\xc4\xfdX\x89\xf3\xa8\xaa')[0]     # 5 errors
b'hello world'
>>> rsc.decode(b'hXXXo worXd\xed%T\xc4\xfdXX\xf3\xa8\xaa')[0]        # 6 errors - fail
Traceback (most recent call last):
  ...
ReedSolomonError: Could not locate error

>>> rsc = RSCodec(12)  # using 2 more ecc symbols (to correct max 6 errors or 12 erasures)
>>> rsc.encode(b'hello world')
b'hello world?Ay\xb2\xbc\xdc\x01q\xb9\xe3\xe2='
>>> rsc.decode(b'hello worXXXXy\xb2XX\x01q\xb9\xe3\xe2=')[0]         # 6 errors - ok
b'hello world'
>>> rsc.decode(b'helXXXXXXXXXXy\xb2XX\x01q\xb9\xe3\xe2=', erase_pos=[3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 15, 16])[0]  # 12 erasures - OK
b'hello world'

# Checking
>> rsc.check(b'hello worXXXXy\xb2XX\x01q\xb9\xe3\xe2=')
[False]
>> rmes, rmesecc = rsc.decode(b'hello worXXXXy\xb2XX\x01q\xb9\xe3\xe2=')
>> rsc.check(rmesecc)
[True]

# To use longer chunks or bigger values than 255 (may be very slow)
>> rsc = RSCodec(12, nsize=4095)  # always use a power of 2 minus 1
>> rsc = RSCodec(12, c_exp=12)  # alternative way to set nsize=4095
>> mes = 'a' * (4095-12)
>> mesecc = rsc.encode(mes)
>> mesecc[2] = 1
>> mesecc[-1] = 1
>> rmes, rmesecc = rsc.decode(mesecc)
>> rsc.check(mesecc)
[False]
>> rsc.check(rmesecc)
[True]

If you want full control, you can skip the API and directly use the library as-is. Here's how:

First you need to init the precomputed tables:
>> import reedsolo as rs
>> rs.init_tables(0x11d)
Pro tip: if you get the error: ValueError: byte must be in range(0, 256), please check that your prime polynomial is correct for your field.
Pro tip2: by default, you can only encode messages of max length and max symbol value = 256. If you want to encode bigger messages,
please use the following (where c_exp is the exponent of your Galois Field, eg, 12 = max length 2^12 = 4096):
>> prim = rs.find_prime_polys(c_exp=12, fast_primes=True, single=True)
>> rs.init_tables(c_exp=12, prim=prim)

Let's define our RS message and ecc size:
>> n = 255  # length of total message+ecc
>> nsym = 12  # length of ecc
>> mes = "a" * (n-nsym)  # generate a sample message

To optimize, you can precompute the generator polynomial:
>> gen = rs.rs_generator_poly_all(n)

Then to encode:
>> mesecc = rs.rs_encode_msg(mes, nsym, gen=gen[nsym])

Let's tamper our message:
>> mesecc[1] = 0

To decode:
>> rmes, recc = rs.rs_correct_msg(mesecc, nsym, erase_pos=erase_pos)
Note that both the message and the ecc are corrected (if possible of course).
Pro tip: if you know a few erasures positions, you can specify them in a list `erase_pos` to double the repair power. But you can also just specify an empty list.

If the decoding fails, it will normally automatically check and raise a ReedSolomonError exception that you can handle.
However if you want to manually check if the repaired message is correct, you can do so:
>> rs.rs_check(rmes + recc, nsym)

Note: if you want to use multiple reedsolomon with different parameters, you need to backup the globals and restore them before calling reedsolo functions:
>> rs.init_tables()
>> global gf_log, gf_exp, field_charac
>> bak_gf_log, bak_gf_exp, bak_field_charac = gf_log, gf_exp, field_charac
Then at anytime, you can do:
>> global gf_log, gf_exp, field_charac
>> gf_log, gf_exp, field_charac = bak_gf_log, bak_gf_exp, bak_field_charac
>> mesecc = rs.rs_encode_msg(mes, nsym)
>> rmes, recc = rs.rs_correct_msg(mesecc, nsym)
The globals backup is not necessary if you use RSCodec, it will be automatically managed.

Read the sourcecode's comments for more info about how it works, and for the various parameters you can setup if
you need to interface with other RS codecs.

To use the Cython implementation, you need to pip install cython and a C++ compiler (Microsoft Visual C++ 14.0 for Windows and Python 3.7). Then you can simply cd to the root of the folder where creedsolo.pyx is, and type python setup.py build_ext –inplace. Alternatively, you can generate just the C++ code by typing cython -3 creedsolo.pyx.