RPi Mini Battery Display

Library and command-line program to control 10-segment mini battery displays based on the TM1651 chip, such as the ones from Open-Smart, on a Raspberry Pi.

System requirements

The rpi-mini-battery-display library is written to run on a Raspberry Pi. It has been tested on Raspbian Buster (10) with Python 3.7.

If you don't have pip, install it first with:

sudo apt install python3-pip

This library uses the RPi.GPIO library to communicate with the TM1651 chip. The default user pi in Raspbian has already the right permissions for GPIO access. If you want to use the library as another user, the user needs to be in the gpio group to have the right permissions. This can be done with:

sudo adduser <username> gpio

Installation

sudo pip3 install rpi-mini-battery-display

Connections

The mini battery display should be connected like this to the Raspberry Pi's GPIO header:

See pinout.xyz for the Raspberry Pi GPIO pinout.

The CLK and DIO pin can be connected to other pins on the Raspberry Pi, but these are the default values used by the code. If you change the connections, you have to supply the other pin values as parameters to the software.

Usage

You can use the rpi-mini-battery-display program to set the level of the battery display from 0 to 7 or to let it show the CPU percentage as a level from 0 (less than 12.5%) to 7 (more than 87.5%):

usage: rpi-mini-battery-display [-h] [-c CLOCK_PIN] [-d DATA_PIN]
                                [-b BRIGHTNESS] (-l LEVEL | -p)

Control a 10 LED mini battery display with TM1651 chip

optional arguments:
  -h, --help            show this help message and exit
  -c CLOCK_PIN, --clock-pin CLOCK_PIN
                        Clock pin in BCM notation (default: 24, range: 0-27)
  -d DATA_PIN, --data-pin DATA_PIN
                        Data pin in BCM notation (default: 23, range: 0-27)
  -b BRIGHTNESS, --brightness BRIGHTNESS
                        Brightness (default: 2, range: 0-7)
  -l LEVEL, --level LEVEL
                        Set battery level (range: 0-7)
  -p, --processor       Show CPU percentage

Changelog

• 0.2.0 (2020-01-27): Added option to show the CPU percentage
• 0.1.0 (2020-01-26): Initial version

TODO

• Code refactoring, as this project currently is a rather direct Python port of the original C++/Arduino code that came with the mini battery display I bought on AliExpress.
• Individually address the LED segments instead of only using them as a LED bar (fairly trivial, I already played with it but haven't implemented the necessary method yet).
• Add static typing with mypy.
• Support other versions of the mini battery displays based on the TM1651 chip, for instance the 5-segment one.
• Support other mini battery displays, such as the Grove LED Bar, which uses the MY9221 chip.

License

This project is provided by Koen Vervloesem as open source software with the MIT license. See the LICENSE file for more information.