securesystemslib 0.23.0

Create RSA Keys

Note: In the instructions below, lines that start with >>> denote commands that should be entered by the reader, # begins the start of a comment, and text without prepended symbols is the output of a command.

>>> from securesystemslib.interface import *

# The following function creates an RSA key pair, where the private key is
# saved to "rsa_key1" and the public key to "rsa_key1.pub" (both saved to
# the current working directory).  A full directory path may be specified
# instead of saving keys to the current working directory.  If specified
# directories do not exist, they will be created.
>>> generate_and_write_rsa_keypair(
        password="password", filepath="rsa_key1", bits=2048)

# If the key length is unspecified, it defaults to 3072 bits. A length of
# less than 2048 bits raises an exception. A similar function is available
# to supply a password on the prompt. If an empty password is entered, the
# private key is saved unencrypted.
>>> generate_and_write_rsa_keypair_with_prompt("rsa_key2")
enter password to encrypt private key file '/path/to/rsa_key2'
(leave empty if key should not be encrypted):
Confirm:

The following four key files should now exist:

1. rsa_key1

2. rsa_key1.pub

3. rsa_key2

4. rsa_key2.pub

Import RSA Keys

# Continuing from the previous section . . .

# Import an existing public key.
>>> public_rsa_key1 = import_rsa_publickey_from_file("rsa_key1.pub")

# Import an existing private key.  If your private key is encrypted,
# which it should be, you either have to pass a 'password' or enter one
# on the prompt.
>>> private_rsa_key1 = import_rsa_privatekey_from_file("rsa_key1", password="some passphrase")
# OR:
>>> private_rsa_key1 = import_rsa_privatekey_from_file("rsa_key1", prompt=True)
enter password to decrypt private key file '/path/to/rsa_key1'
(leave empty if key not encrypted):

import_rsa_privatekey_from_file() raises a securesystemslib.exceptions.CryptoError exception if the key / password is invalid:

securesystemslib.exceptions.CryptoError: RSA (public, private) tuple cannot
be generated from the encrypted PEM string: Bad decrypt. Incorrect password?

Note: The specific message provided by the exception might differ depending on which cryptography library is used.

Create and Import Ed25519 Keys

# Continuing from the previous section . . .

# The same generation and import functions as for rsa keys exist for ed25519
>>> generate_and_write_ed25519_keypair_with_prompt('ed25519_key')
enter password to encrypt private key file '/path/to/ed25519_key'
(leave empty if key should not be encrypted):
Confirm:

# Import the Ed25519 public key just created . . .
>>> public_ed25519_key = import_ed25519_publickey_from_file('ed25519_key.pub')

# and its corresponding private key.
>>> private_ed25519_key = import_ed25519_privatekey_from_file('ed25519_key', prompt=True)
enter password to decrypt private key file '/path/to/ed25519_key'
(leave empty if key should not be encrypted):

Create and Import ECDSA Keys

# The same generation and import functions as for rsa and ed25519 keys
# exist for ecdsa
>>> generate_and_write_ecdsa_keypair_with_prompt('ecdsa_key')
enter password to decrypt private key file '/path/to/ecdsa_key'
(leave empty if key should not be encrypted):

>>> public_ecdsa_key = import_ecdsa_publickey_from_file('ecdsa_key.pub')
>>> private_ecdsa_key = import_ecdsa_privatekey_from_file('ecdsa_key', prompt=True)
enter password to decrypt private key file '/path/to/ecdsa_key'
(leave empty if key should not be encrypted):

Generate ECDSA, Ed25519, and RSA Signatures

Note: Users may also access the crypto functions directly to perform cryptographic operations.

>>> from securesystemslib.keys import *

>>> data = b'The quick brown fox jumps over the lazy dog'
>>> ed25519_key = generate_ed25519_key()
>>> signature = create_signature(ed25519_key, data)
>>> rsa_key = generate_rsa_key(2048)
>>> signature = create_signature(rsa_key, data)
>>> ecdsa_key = generate_ecdsa_key()
>>> signature = create_signature(ecdsa_key, data)

Verify ECDSA, Ed25519, and RSA Signatures

# Continuing from the previous sections . . .

>>> data = b'The quick brown fox jumps over the lazy dog'
>>> ed25519_key = generate_ed25519_key()
>>> signature = create_signature(ed25519_key, data)
>>> verify_signature(ed25519_key, signature, data)
True
>>> verify_signature(ed25519_key, signature, 'bad_data')
False
>>> rsa_key = generate_rsa_key()
>>> signature = create_signature(rsa_key, data)
>>> verify_signature(rsa_key, signature, data)
True
>>> ecdsa_key = generate_ecdsa_key()
>>> signature = create_signature(ecdsa_key, data)
>>> verify_signature(ecdsa_key, signature, data)
True

Miscellaneous functions

create_rsa_encrypted_pem()

# Continuing from the previous sections . . .

>>> rsa_key = generate_rsa_key()
>>> private = rsa_key['keyval']['private']
>>> passphrase = 'secret'
>>> encrypted_pem = create_rsa_encrypted_pem(private, passphrase)

import_rsakey_from_public_pem()

>>> rsa_key = generate_rsa_key()
>>> public = rsa_key['keyval']['public']
>>> rsa_key2 = import_rsakey_from_public_pem(public)

import_rsakey_from_pem()

>>> rsa_key = generate_rsa_key()
>>> public = rsa_key['keyval']['public']
>>> private = rsa_key['keyval']['private']
>>> rsa_key2 = import_rsakey_from_pem(public)
>>> rsa_key3 = import_rsakey_from_pem(private)

extract_pem()

>>> rsa_key = generate_rsa_key()
>>> private_pem = extract_pem(rsakey['keyval']['private'], private_pem=True)
>>> public_pem = extract_pem(rsakey['keyval']['public'], private_pem=False)

encrypt_key()

>>> ed25519_key = generate_ed25519_key()
>>> password = 'secret'
>>> encrypted_key = encrypt_key(ed25519_key, password)

decrypt_key()

>>> ed25519_key = generate_ed25519_key()
>>> password = 'secret'
>>> encrypted_key = encrypt_key(ed25519_key, password)
>>> decrypted_key = decrypt_key(encrypted_key.encode('utf-8'), password)
>>> decrypted_key == ed25519_key
True

create_rsa_encrypted_pem()

>>> rsa_key = generate_rsa_key()
>>> private = rsa_key['keyval']['private']
>>> passphrase = 'secret'
>>> encrypted_pem = create_rsa_encrypted_pem(private, passphrase)

is_pem_public()

>>> rsa_key = generate_rsa_key()
>>> public = rsa_key['keyval']['public']
>>> private = rsa_key['keyval']['private']
>>> is_pem_public(public)
True
>>> is_pem_public(private)
False

is_pem_private()

>>> rsa_key = generate_rsa_key()
>>> private = rsa_key['keyval']['private']
>>> public = rsa_key['keyval']['public']
>>> is_pem_private(private)
True
>>> is_pem_private(public)
False

import_ecdsakey_from_private_pem()

>>> ecdsa_key = generate_ecdsa_key()
>>> private_pem = ecdsa_key['keyval']['private']
>>> ecdsa_key2 = import_ecdsakey_from_private_pem(private_pem)

import_ecdsakey_from_public_pem()

>>> ecdsa_key = generate_ecdsa_key()
>>> public = ecdsa_key['keyval']['public']
>>> ecdsa_key2 = import_ecdsakey_from_public_pem(public)

import_ecdsakey_from_pem()

>>> ecdsa_key = generate_ecdsa_key()
>>> private_pem = ecdsa_key['keyval']['private']
>>> ecdsa_key2 = import_ecdsakey_from_pem(private_pem)
>>> public_pem = ecdsa_key['keyval']['public']
>>> ecdsa_key2 = import_ecdsakey_from_pem(public_pem)

GnuPG interface

Signature creation and public key export requires installation of the gpg or gpg2 command line tool, which may be downloaded from https://gnupg.org/download. It is also needed to generate the supported RSA or DSA signing keys (see gpg man pages for detailed instructions). Sample keys are available in a test keyring at tests/gpg_keyrings/rsa, which may be passed to the signing and export functions using the homedir argument (if not passed the default keyring is used). The GPG client to use can be also specified with the help of environment variable GNUPG.

>>> import securesystemslib.gpg.functions as gpg

>>> data = b"The quick brown fox jumps over the lazy dog"

>>> signing_key_id = "8465A1E2E0FB2B40ADB2478E18FB3F537E0C8A17"
>>> keyring = "tests/gpg_keyrings/rsa"

>>> signature = gpg.create_signature(data, signing_key_id, homedir=keyring)
>>> public_key = gpg.export_pubkey(non_default_signing_key, homedir=keyring)

>>> gpg.verify_signature(signature, public_key, data)
True