SlapOS toolbox.
Project description
slapos.toolbox
==============
0.40.4 (2014-10-14)
-------------------
* The equeue server now supports additional parameters to the callbacks, separated by \0 in the JSON protocol.
The pubsubnotifier accepts a --transaction-id parameter. If missing, the current timestamp is used.
The pubsubnotifier then provides the transaction-id value in the POST call to /notify.
Together, these three changes allow us to put in the crontab:
0 0 * * * /srv/slapgrid/slappartXX/bin/exporter --transaction-id `date +%s`
and the same timestamp value is reported as transaction id in the equeue logs for BOTH the pull
and push operations.
0.40.3 (2014-10-13)
-------------------
* Slaprunner: stop proxy when removing instances content. This fixes the "partition11 table does not exist" error.
0.40.2 (2014-09-25)
-------------------
* Slaprunner: Various bug fix
* Slaprunner: Update supervisorctl interaction to work with latest slapos.core revision
0.40.1 (2014-09-02)
-------------------
* Slaprunner: Fix a bad behaviour within slapos
0.40 (2014-09-01)
-----------------
* Slaprunner: Supervisord runs slapos commands
* Slaprunner: fixes for git repositories management
0.39.5 (Unreleased)
-------------------
* Slaprunner: Add slave support test.
0.39.4 (2014-08-11)
-------------------
* Slaprunner: Add a minishell feature, using far less bandwith than shellinabox
* Slaprunner: Slapgrid state is correctly rendered while compiling
* Slaprunner: consider new parameter's values without needing to restart [719da31a]
* Slaprunner: slapgrid's last result is always accessible through a stored file [a0bc26e9]
* Slaprunner: Fix dangerous bug concerning custom parameters [50ca3386]
* Slaprunner: various fixes and improvements
0.39.3 (2014-07-11)
-----------------
* Slaprunner: Add folder to favorites [Alain T.]
* Slaprunner: Fix https git clone not possible if no login [Alain T.]
* Slaprunner: Improve editor full window [Alain T.]
* Pubsub: More explicit RSS displayed in reversed chronoligical order [Cedric LN]
* Pubsub-notifier: add logger [Cedric LN]
* Slaprunner: Various fixes
0.39.2 (2014-05-16)
-----------------
* Slaprunner: Add tab support [Alain T.]
* Slaprunner: Add upload file [Alain T.]
* Slaprunner: Improve editor full window [Alain T.]
* Slaprunner: Various fixes
0.39.1 (2014-04-30)
-----------------
* Slaprunner: Various fixes
0.39 (2014-02-20)
-----------------
* Slaprunner: new web interface design
* Slaprunner: one function handle both "run software" and "run instance" [9c660c0]
* Slaprunner: building and deploying can be customized [0db1f6b, b33bd1f]
* Slaprunner: adds a multi-user feature [efad6d]
* Slaprunner: add fullscreen mode for text edition [83d1dc]
* Slaprunner: direct access to monitoring of running instance, if it exists [f8e7bf3]
0.38.1 (2013-12-06)
-------------------
* Slaprunner: do not delete proxy.db on each run software [71777fc0]
0.38 (2013-12-03)
-----------------
* Slaprunner: adds an integrated shell [ca6a670a]
* Slaprunner: uses basic authentification [05913751]
* Slaprunner: adds automated deployment of a Software Release [c8ab1273]
* Slaprunner: flask development server replaced by Gunicorn, a WSGI server [48d60d0f]
* Slaprunner: new test scenario for auto-deployment [c6007954]
* Runner resiliencytestsuite: adds basic auth support [3c03f12b]
* Runner resiliencytestsuite: tests can be done on only one Slapos node [07198d87]
0.37.4 (2013-10-15)
-------------------
* Improve QEMU QMP wrapper by adding drive-backup method and other helpers. [0afb7d6, 95d0c8b]
0.37.3 (2013-10-10)
-------------------
* pubsub: don't swallow output of subprocess to allow debug. [c503484]
0.37.2 (2013-10-10)
-------------------
* Add QEMU QMP wrapper. [9e819a8]
* KVM resiliency test: update docstring about how to setup disk image. [dbe347f]
* KVM resiliency test: change key for each clone. [7ef1db3]
0.37.1 (2013-10-03)
-------------------
* pubsub notifier: handle timeout and other connection errors. [ac4c75c]
* equeue: cast str(timestamp) to please gdbm. [8b067d6]
0.37 (2013-09-30)
=================
* equeue: log output of subprocess. [1694937]
* slaprunner: don't send 200 when login is bad. [4a8e10bf]
* Improve reliability of resiliency tests.
0.36 (2013-09-05)
=================
* Add resiliency test system.
* Add kvm resiliency test suite.
* Add slaprunner resiliency test suite.
* slaprunner: don't tell user false assumptions [71dc4a08e].
* slaprunner: allow profile/instance to be run by GET [4b454814a].
* slaprunner: remove boring username/password length check [fcce0336c].
0.35.1 (2013-08-05)
===================
* slaprunner: add support for reverse proxy [6c379644].
0.35.0 (2013-07-08)
===================
* Resiliency: equeue is rewriten extending SocketServer.ThreadingUnixStreamServer (Thanks to Julien M.). So far outputs of commands invoked by equeue are redirected to /dev/null to avoid locking the whole process. [Cedric Le Ninivin]
* Add htpasswd script. This script is meant to produce htpasswd file without installing apache. [Cedric Le Ninivin]
* slaprunner: Grammar improvements.
0.34.0 (2013-03-28)
===================
* runner: Log textarea is resizable. [Cedric de Saint Martin]
* runner: Fix bug where slaproxy hangs: Redirect slapproxy output to stdout. [Cedric de Saint Martin]
* lampconfigure: Add support for running SQL scripts in lampconfigure. [Cedric de Saint Martin]
* runner: software_type now survives to slaprunner reboot. [Cedric de Saint Martin]
0.33.1 (2013-02-12)
===================
* runner: Add default values for git repository while cloning. [Cedric de Saint Martin]
* runner: Don't remove git repo if error occurred during clone. [Cedric de Saint Martin]
* runner: Fix bug where software_type of main instance is *impossible* to set reliably. [Cedric de Saint Martin]
0.33 (2013-01-24)
=================
* agent: run tests in order. [Marco Mariani]
* slaprunner: Add process killer killing all processes when instance is
stopped. [Cedric Le Ninivin]
* slaprunner: slapgrid-cp will be run at startup. [Cedric Le Ninivin]
* slaprunner: Improved design. [Alain Takoudjou]
* slaprunner: Don't set arbitrary limitations on the complexity of password.
[Cedric de Saint Martin]
0.32 (2012-12-13)
=================
* pubsub: support multiple notifications and callbacks. [Marco Mariani]
* pubsub: print/return errors from subprocess or notifications. [Marco Mariani]
* agent: ignore SR status, retrieve instance status with .getStatus(). [Marco
Mariani]
* slapmonitor: added slapmonitor-xml function + entry point. [Marco Mariani]
0.31.1 (2012-10-02)
===================
* slaprunner: Add new file manager. [Alain Takoudjou]
* slaprunner: Ask confirm before delete important folder. [Alain Takoudjou]
0.31 (2012-10-02)
=================
* slaprunner: Add correct support for software_type. [Cedric de Saint Martin]
0.30 (2012-08-29)
=================
* Add promise support on slapcontainer script. [Antoine Catton]
0.29.1 (2012-08-23)
===================
* Minor fix on slapcontainer. [Antoine Catton]
0.29 (2012-08-22)
=================
* Add slapcontainer stateless script. [Antoine Catton]
0.28.2 (2012-08-17)
===================
* Slaprunner: Move password, process pid and config files to etc_dir [Alain Takoudjou]
0.28.1 (2012-08-15)
===================
* Update ACE to 08.11.2012 and JQuery to 1.8.0. [Cedric de Saint Martin]
0.28 (2012-08-09)
=================
* slaprunner: add support for authentication management. [Alain Takoudjou]
0.27 (2012-08-07)
=================
* pubsub: add support for multiple notification servers. [Timothée Lacroix]
0.26.1 (2012-07-09)
===================
* runner: Add support to slapos.core 0.26.2 [Cedric de Saint Martin]
0.26 (2012-07-06)
=================
* slaprunner now supports authentication and instance parameters.
[Alain Takoudjou]
* Redisign of Test Agent so that it supports proper instantiation test and
report. [Vincent Pelletier]
0.25 (2012-06-19)
=================
* slapmonitor is fully functional. [Mohamadou Mbengue]
0.24 (2012-04-19)
=================
* Slap Test Agent : test software release installation and instance allocation [Yingjie Xu]
0.22 (2012-04-05)
=================
* Install argparse if missing [Łukasz Nowak]
0.21 (2012-04-04)
=================
* zodbpack : simple tool to pack ZODB [Łukasz Nowak]
0.20 (2012-03-28)
=================
* slaprunner : fix recursive include of .gif files [Alain Takoudjou]
0.19 (2012-03-28)
=================
* slaprunner : Add Support for more instances at the same time. [Alain Takoudjou]
* slaprunner : Add slapgrid process control and management. [Alain Takoudjou]
* slaprunner : Add Cloud9 IDE. [Alain Takoudjou]
* slaprunner : Add develop location of cloned git repository. [Alain Takoudjou]
0.18 (2012-02-23)
=================
* slaprunner : Add git commit and push support. [Alain Takoudjou]
* slaprunner : Solve UI problems in project management. [Alain Takoudjou]
* slaprunner : Solve bug where ACE modifies carrier returns. [Alain Takoudjou]
* slaprunner : Add ajax view of build log. [Alain Takoudjou]
* slaprunner : Allow to edit any file in repository. [Alain Takoudjou]
0.17 (2012-02-10)
=================
* slapbuilder: Update slapbuilder to new OpenSuse 12.1. [Cedric Le Ninivin]
* slapbuilder: Added automatic IPv6 support thanks to ViFiB OpenVPN.
[Cedric Le Ninivin]
* slapbuilder: Added virtual machine support. [Cedric Le Ninivin]
* slapbuilder: Added "One Disk" feature. [Cedric Le Ninivin]
0.16 (2012-01-20)
=================
* Fix MANIFEST.in [Cedric de Saint Martin]
0.15 (2012-01-20)
=================
* slaprunner: Adding project and git repository management [Alain Takoudjou]
0.14 (2012-01-09)
=================
* onetimeupload: SSL should be provided by an http frontend [Romain Courteaud]
0.13 (2011-12-30)
=================
* builder: fix usage of mkstemp [Romain Courteaud]
0.12 (2011-12-29)
=================
* builder: dynamic offset calculation [Romain Courteaud]
0.11 (2011-12-23)
=================
* equeue: Add execution queue server. [Antoine Catton]
* pubsub: Add pubsub server using pubsubhubbub for notifications. [Antoine Catton]
0.10 (2011-11-07)
=================
* slapbuilder: Support banging. [Łukasz Nowak]
* lamp : Fix bug when using file_token option [Alain Takoudjou]
0.9 (2011-10-29)
================
* Add LAMP tool to manage lamp instances. [Alain Takoudjou]
* Add onetimedownload : a simple script which download any http resource
and save it into a specified file_path. [Nicolas Delaby]
0.8 (2011-10-24)
================
* Add new style to runner. [Alain Takoudjou]
0.7 (2011-10-17)
================
* generic: Added systool with killpidfromfile. [Łukasz Nowak]
* slaprunner: Avoid error when trying to remove instance directory containing
not writable directories. [Alain Takoudjou]
0.6 (2011-07-13)
================
* slapbuilder: Typo during PKI repository creation fixed. [Łukasz Nowak]
0.5 (2011-07-12)
================
* slapbuilder: Do not play too much with buildout, SlapOS installation is
responsible for correctly featured zc.buildout [Łukasz Nowak]
0.4 (1011-07-11)
================
* Update slaprunner to run on newer slapos (requires at least 0.10
to work). [Cedric de Saint Martin]
0.3 (2011-06-27)
================
* slapbuilder: use slapos provided networkcached buildout.
* slapbuilder: fix network issues on busy networks ("Neighbour table
overflow.")
0.2 (2011-06-10)
================
* In slapbuilder: drop to 100 partitions by default, move out PKI from USB key
to real disk. [Łukasz Nowak]
0.1 (2011-05-27)
================
* Created slapos.toolbox from slapos.tool.builder, slapos.tool.runner,
slapos.tool.cloudmgr, slapos.tool.ontimeupload and slapos.tool.networkcache.
[Łukasz Nowak]
builder
=======
builder is a program to install a slapos image.
cloudmgr
========
monitor
=======
Monitoring for SLAP (Simple Language for Accounting and Provisioning) python library.
onetimeupload
=============
onetimeupload is an HTTP application which only accepts one file to be
uploaded.
shacache
========
The network cache server is a NoSQL storage with a REST API.
How does it works
-----------------
::
_______________
/ \
| |
------>| NETWORKCACHED |
| ----| |<-----
| | \_______________/ |
GET /key | | |
| | File | PUT / <- data
__|__v______ ______|_____
| | | |
| Client | | Client |
|____________| |____________|
Basically, the networkcached archives the files through HTTP PUT method.
When a client want to download the file it just need to provide the key
value and the server will send a response with the file data.
::
API:
PUT / :
parameter: file uploaded
Used to upload/modify an entry
GET /<key>
Return raw content
Raise HTTP error (404) if key does not exist
Installation
------------
::
$ python2.6 setup.py install
Now it is time to create the 'networkcached.conf' file in /etc/networkcached.conf
directory, using your preferred text editor (gedit, kate, vim.).
Follow text shall be put in this file::
[networkcached]
host = 127.0.0.1
port = 5001
cache_base_folder = /var/cache/networkcached/
Run the server::
# networkcached networkcached.conf
Setup Develoment Environment
----------------------------
::
$ mkdir -p ~/networkcached/downloads
$ cd ~/networkcached
Now it is time to create 'buildout.cfg' file in ~/networkcached directory,
using your preferred text editor (gedit, kate, vim.).
Follow text shall be put in this file::
[buildout]
extensions = mr.developer
auto-checkout = slapos.tool.networkcached
download-cache = /nexedi/buildout-networkcached/downloads
eggs-directory = /nexedi/buildout-networkcached/eggs
parts =
networkcached
[sources]
slapos.tool.networkcached = svn https://svn.erp5.org/repos/vifib/trunk/utils/slapos.tool.networkcached
[networkcached]
recipe = zc.recipe.egg
eggs =
slapos.tool.networkcached
Now you bootstrap the buildout::
$ python -S -c 'import urllib;print urllib.urlopen(\
"http://svn.zope.org/*checkout*/zc.buildout/trunk/bootstrap/bootstrap.py"\
).read()' | python -S -
Run the buildout::
$ bin/buildout -v
Now it is time to create the 'networkcached.conf' file in ~/networkcached
directory, using your preferred text editor (gedit, kate, vim.).
Follow text shall be put in this file::
[networkcached]
host = 127.0.0.1
port = 5001
cache_base_folder = ~/networkcached/networkcached-database
Now you can start your networkcached server:
$ bin/networkcached networkcached.conf
or
$ bin/networkcached -d networkcached-database -a 127.0.0.1 -p 5002
webrunner
=========
==============
0.40.4 (2014-10-14)
-------------------
* The equeue server now supports additional parameters to the callbacks, separated by \0 in the JSON protocol.
The pubsubnotifier accepts a --transaction-id parameter. If missing, the current timestamp is used.
The pubsubnotifier then provides the transaction-id value in the POST call to /notify.
Together, these three changes allow us to put in the crontab:
0 0 * * * /srv/slapgrid/slappartXX/bin/exporter --transaction-id `date +%s`
and the same timestamp value is reported as transaction id in the equeue logs for BOTH the pull
and push operations.
0.40.3 (2014-10-13)
-------------------
* Slaprunner: stop proxy when removing instances content. This fixes the "partition11 table does not exist" error.
0.40.2 (2014-09-25)
-------------------
* Slaprunner: Various bug fix
* Slaprunner: Update supervisorctl interaction to work with latest slapos.core revision
0.40.1 (2014-09-02)
-------------------
* Slaprunner: Fix a bad behaviour within slapos
0.40 (2014-09-01)
-----------------
* Slaprunner: Supervisord runs slapos commands
* Slaprunner: fixes for git repositories management
0.39.5 (Unreleased)
-------------------
* Slaprunner: Add slave support test.
0.39.4 (2014-08-11)
-------------------
* Slaprunner: Add a minishell feature, using far less bandwith than shellinabox
* Slaprunner: Slapgrid state is correctly rendered while compiling
* Slaprunner: consider new parameter's values without needing to restart [719da31a]
* Slaprunner: slapgrid's last result is always accessible through a stored file [a0bc26e9]
* Slaprunner: Fix dangerous bug concerning custom parameters [50ca3386]
* Slaprunner: various fixes and improvements
0.39.3 (2014-07-11)
-----------------
* Slaprunner: Add folder to favorites [Alain T.]
* Slaprunner: Fix https git clone not possible if no login [Alain T.]
* Slaprunner: Improve editor full window [Alain T.]
* Pubsub: More explicit RSS displayed in reversed chronoligical order [Cedric LN]
* Pubsub-notifier: add logger [Cedric LN]
* Slaprunner: Various fixes
0.39.2 (2014-05-16)
-----------------
* Slaprunner: Add tab support [Alain T.]
* Slaprunner: Add upload file [Alain T.]
* Slaprunner: Improve editor full window [Alain T.]
* Slaprunner: Various fixes
0.39.1 (2014-04-30)
-----------------
* Slaprunner: Various fixes
0.39 (2014-02-20)
-----------------
* Slaprunner: new web interface design
* Slaprunner: one function handle both "run software" and "run instance" [9c660c0]
* Slaprunner: building and deploying can be customized [0db1f6b, b33bd1f]
* Slaprunner: adds a multi-user feature [efad6d]
* Slaprunner: add fullscreen mode for text edition [83d1dc]
* Slaprunner: direct access to monitoring of running instance, if it exists [f8e7bf3]
0.38.1 (2013-12-06)
-------------------
* Slaprunner: do not delete proxy.db on each run software [71777fc0]
0.38 (2013-12-03)
-----------------
* Slaprunner: adds an integrated shell [ca6a670a]
* Slaprunner: uses basic authentification [05913751]
* Slaprunner: adds automated deployment of a Software Release [c8ab1273]
* Slaprunner: flask development server replaced by Gunicorn, a WSGI server [48d60d0f]
* Slaprunner: new test scenario for auto-deployment [c6007954]
* Runner resiliencytestsuite: adds basic auth support [3c03f12b]
* Runner resiliencytestsuite: tests can be done on only one Slapos node [07198d87]
0.37.4 (2013-10-15)
-------------------
* Improve QEMU QMP wrapper by adding drive-backup method and other helpers. [0afb7d6, 95d0c8b]
0.37.3 (2013-10-10)
-------------------
* pubsub: don't swallow output of subprocess to allow debug. [c503484]
0.37.2 (2013-10-10)
-------------------
* Add QEMU QMP wrapper. [9e819a8]
* KVM resiliency test: update docstring about how to setup disk image. [dbe347f]
* KVM resiliency test: change key for each clone. [7ef1db3]
0.37.1 (2013-10-03)
-------------------
* pubsub notifier: handle timeout and other connection errors. [ac4c75c]
* equeue: cast str(timestamp) to please gdbm. [8b067d6]
0.37 (2013-09-30)
=================
* equeue: log output of subprocess. [1694937]
* slaprunner: don't send 200 when login is bad. [4a8e10bf]
* Improve reliability of resiliency tests.
0.36 (2013-09-05)
=================
* Add resiliency test system.
* Add kvm resiliency test suite.
* Add slaprunner resiliency test suite.
* slaprunner: don't tell user false assumptions [71dc4a08e].
* slaprunner: allow profile/instance to be run by GET [4b454814a].
* slaprunner: remove boring username/password length check [fcce0336c].
0.35.1 (2013-08-05)
===================
* slaprunner: add support for reverse proxy [6c379644].
0.35.0 (2013-07-08)
===================
* Resiliency: equeue is rewriten extending SocketServer.ThreadingUnixStreamServer (Thanks to Julien M.). So far outputs of commands invoked by equeue are redirected to /dev/null to avoid locking the whole process. [Cedric Le Ninivin]
* Add htpasswd script. This script is meant to produce htpasswd file without installing apache. [Cedric Le Ninivin]
* slaprunner: Grammar improvements.
0.34.0 (2013-03-28)
===================
* runner: Log textarea is resizable. [Cedric de Saint Martin]
* runner: Fix bug where slaproxy hangs: Redirect slapproxy output to stdout. [Cedric de Saint Martin]
* lampconfigure: Add support for running SQL scripts in lampconfigure. [Cedric de Saint Martin]
* runner: software_type now survives to slaprunner reboot. [Cedric de Saint Martin]
0.33.1 (2013-02-12)
===================
* runner: Add default values for git repository while cloning. [Cedric de Saint Martin]
* runner: Don't remove git repo if error occurred during clone. [Cedric de Saint Martin]
* runner: Fix bug where software_type of main instance is *impossible* to set reliably. [Cedric de Saint Martin]
0.33 (2013-01-24)
=================
* agent: run tests in order. [Marco Mariani]
* slaprunner: Add process killer killing all processes when instance is
stopped. [Cedric Le Ninivin]
* slaprunner: slapgrid-cp will be run at startup. [Cedric Le Ninivin]
* slaprunner: Improved design. [Alain Takoudjou]
* slaprunner: Don't set arbitrary limitations on the complexity of password.
[Cedric de Saint Martin]
0.32 (2012-12-13)
=================
* pubsub: support multiple notifications and callbacks. [Marco Mariani]
* pubsub: print/return errors from subprocess or notifications. [Marco Mariani]
* agent: ignore SR status, retrieve instance status with .getStatus(). [Marco
Mariani]
* slapmonitor: added slapmonitor-xml function + entry point. [Marco Mariani]
0.31.1 (2012-10-02)
===================
* slaprunner: Add new file manager. [Alain Takoudjou]
* slaprunner: Ask confirm before delete important folder. [Alain Takoudjou]
0.31 (2012-10-02)
=================
* slaprunner: Add correct support for software_type. [Cedric de Saint Martin]
0.30 (2012-08-29)
=================
* Add promise support on slapcontainer script. [Antoine Catton]
0.29.1 (2012-08-23)
===================
* Minor fix on slapcontainer. [Antoine Catton]
0.29 (2012-08-22)
=================
* Add slapcontainer stateless script. [Antoine Catton]
0.28.2 (2012-08-17)
===================
* Slaprunner: Move password, process pid and config files to etc_dir [Alain Takoudjou]
0.28.1 (2012-08-15)
===================
* Update ACE to 08.11.2012 and JQuery to 1.8.0. [Cedric de Saint Martin]
0.28 (2012-08-09)
=================
* slaprunner: add support for authentication management. [Alain Takoudjou]
0.27 (2012-08-07)
=================
* pubsub: add support for multiple notification servers. [Timothée Lacroix]
0.26.1 (2012-07-09)
===================
* runner: Add support to slapos.core 0.26.2 [Cedric de Saint Martin]
0.26 (2012-07-06)
=================
* slaprunner now supports authentication and instance parameters.
[Alain Takoudjou]
* Redisign of Test Agent so that it supports proper instantiation test and
report. [Vincent Pelletier]
0.25 (2012-06-19)
=================
* slapmonitor is fully functional. [Mohamadou Mbengue]
0.24 (2012-04-19)
=================
* Slap Test Agent : test software release installation and instance allocation [Yingjie Xu]
0.22 (2012-04-05)
=================
* Install argparse if missing [Łukasz Nowak]
0.21 (2012-04-04)
=================
* zodbpack : simple tool to pack ZODB [Łukasz Nowak]
0.20 (2012-03-28)
=================
* slaprunner : fix recursive include of .gif files [Alain Takoudjou]
0.19 (2012-03-28)
=================
* slaprunner : Add Support for more instances at the same time. [Alain Takoudjou]
* slaprunner : Add slapgrid process control and management. [Alain Takoudjou]
* slaprunner : Add Cloud9 IDE. [Alain Takoudjou]
* slaprunner : Add develop location of cloned git repository. [Alain Takoudjou]
0.18 (2012-02-23)
=================
* slaprunner : Add git commit and push support. [Alain Takoudjou]
* slaprunner : Solve UI problems in project management. [Alain Takoudjou]
* slaprunner : Solve bug where ACE modifies carrier returns. [Alain Takoudjou]
* slaprunner : Add ajax view of build log. [Alain Takoudjou]
* slaprunner : Allow to edit any file in repository. [Alain Takoudjou]
0.17 (2012-02-10)
=================
* slapbuilder: Update slapbuilder to new OpenSuse 12.1. [Cedric Le Ninivin]
* slapbuilder: Added automatic IPv6 support thanks to ViFiB OpenVPN.
[Cedric Le Ninivin]
* slapbuilder: Added virtual machine support. [Cedric Le Ninivin]
* slapbuilder: Added "One Disk" feature. [Cedric Le Ninivin]
0.16 (2012-01-20)
=================
* Fix MANIFEST.in [Cedric de Saint Martin]
0.15 (2012-01-20)
=================
* slaprunner: Adding project and git repository management [Alain Takoudjou]
0.14 (2012-01-09)
=================
* onetimeupload: SSL should be provided by an http frontend [Romain Courteaud]
0.13 (2011-12-30)
=================
* builder: fix usage of mkstemp [Romain Courteaud]
0.12 (2011-12-29)
=================
* builder: dynamic offset calculation [Romain Courteaud]
0.11 (2011-12-23)
=================
* equeue: Add execution queue server. [Antoine Catton]
* pubsub: Add pubsub server using pubsubhubbub for notifications. [Antoine Catton]
0.10 (2011-11-07)
=================
* slapbuilder: Support banging. [Łukasz Nowak]
* lamp : Fix bug when using file_token option [Alain Takoudjou]
0.9 (2011-10-29)
================
* Add LAMP tool to manage lamp instances. [Alain Takoudjou]
* Add onetimedownload : a simple script which download any http resource
and save it into a specified file_path. [Nicolas Delaby]
0.8 (2011-10-24)
================
* Add new style to runner. [Alain Takoudjou]
0.7 (2011-10-17)
================
* generic: Added systool with killpidfromfile. [Łukasz Nowak]
* slaprunner: Avoid error when trying to remove instance directory containing
not writable directories. [Alain Takoudjou]
0.6 (2011-07-13)
================
* slapbuilder: Typo during PKI repository creation fixed. [Łukasz Nowak]
0.5 (2011-07-12)
================
* slapbuilder: Do not play too much with buildout, SlapOS installation is
responsible for correctly featured zc.buildout [Łukasz Nowak]
0.4 (1011-07-11)
================
* Update slaprunner to run on newer slapos (requires at least 0.10
to work). [Cedric de Saint Martin]
0.3 (2011-06-27)
================
* slapbuilder: use slapos provided networkcached buildout.
* slapbuilder: fix network issues on busy networks ("Neighbour table
overflow.")
0.2 (2011-06-10)
================
* In slapbuilder: drop to 100 partitions by default, move out PKI from USB key
to real disk. [Łukasz Nowak]
0.1 (2011-05-27)
================
* Created slapos.toolbox from slapos.tool.builder, slapos.tool.runner,
slapos.tool.cloudmgr, slapos.tool.ontimeupload and slapos.tool.networkcache.
[Łukasz Nowak]
builder
=======
builder is a program to install a slapos image.
cloudmgr
========
monitor
=======
Monitoring for SLAP (Simple Language for Accounting and Provisioning) python library.
onetimeupload
=============
onetimeupload is an HTTP application which only accepts one file to be
uploaded.
shacache
========
The network cache server is a NoSQL storage with a REST API.
How does it works
-----------------
::
_______________
/ \
| |
------>| NETWORKCACHED |
| ----| |<-----
| | \_______________/ |
GET /key | | |
| | File | PUT / <- data
__|__v______ ______|_____
| | | |
| Client | | Client |
|____________| |____________|
Basically, the networkcached archives the files through HTTP PUT method.
When a client want to download the file it just need to provide the key
value and the server will send a response with the file data.
::
API:
PUT / :
parameter: file uploaded
Used to upload/modify an entry
GET /<key>
Return raw content
Raise HTTP error (404) if key does not exist
Installation
------------
::
$ python2.6 setup.py install
Now it is time to create the 'networkcached.conf' file in /etc/networkcached.conf
directory, using your preferred text editor (gedit, kate, vim.).
Follow text shall be put in this file::
[networkcached]
host = 127.0.0.1
port = 5001
cache_base_folder = /var/cache/networkcached/
Run the server::
# networkcached networkcached.conf
Setup Develoment Environment
----------------------------
::
$ mkdir -p ~/networkcached/downloads
$ cd ~/networkcached
Now it is time to create 'buildout.cfg' file in ~/networkcached directory,
using your preferred text editor (gedit, kate, vim.).
Follow text shall be put in this file::
[buildout]
extensions = mr.developer
auto-checkout = slapos.tool.networkcached
download-cache = /nexedi/buildout-networkcached/downloads
eggs-directory = /nexedi/buildout-networkcached/eggs
parts =
networkcached
[sources]
slapos.tool.networkcached = svn https://svn.erp5.org/repos/vifib/trunk/utils/slapos.tool.networkcached
[networkcached]
recipe = zc.recipe.egg
eggs =
slapos.tool.networkcached
Now you bootstrap the buildout::
$ python -S -c 'import urllib;print urllib.urlopen(\
"http://svn.zope.org/*checkout*/zc.buildout/trunk/bootstrap/bootstrap.py"\
).read()' | python -S -
Run the buildout::
$ bin/buildout -v
Now it is time to create the 'networkcached.conf' file in ~/networkcached
directory, using your preferred text editor (gedit, kate, vim.).
Follow text shall be put in this file::
[networkcached]
host = 127.0.0.1
port = 5001
cache_base_folder = ~/networkcached/networkcached-database
Now you can start your networkcached server:
$ bin/networkcached networkcached.conf
or
$ bin/networkcached -d networkcached-database -a 127.0.0.1 -p 5002
webrunner
=========
Release history Release notifications | RSS feed
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
Source Distribution
slapos.toolbox-0.41.0.tar.gz
(1.5 MB
view hashes)
