Pure Python Multicast DNS Service Discovery Library (Bonjour/Avahi compatible)
Project description
python-zeroconf
This is fork of pyzeroconf, Multicast DNS Service Discovery for Python, originally by Paul Scott-Murphy (https://github.com/paulsm/pyzeroconf), modified by William McBrine (https://github.com/wmcbrine/pyzeroconf).
The original William McBrine’s fork note:
This fork is used in all of my TiVo-related projects: HME for Python (and therefore HME/VLC), Network Remote, Remote Proxy, and pyTivo. Before this, I was tracking the changes for zeroconf.py in three separate repos. I figured I should have an authoritative source. Although I make changes based on my experience with TiVos, I expect that they're generally applicable. This version also includes patches found on the now-defunct (?) Launchpad repo of pyzeroconf, and elsewhere around the net -- not always well-documented, sorry.
Compatible with:
Bonjour
Avahi
Compared to some other Zeroconf/Bonjour/Avahi Python packages, python-zeroconf:
isn’t tied to Bonjour or Avahi
doesn’t use D-Bus
doesn’t force you to use particular event loop or Twisted
is pip-installable
has PyPI distribution
Python compatibility
CPython 3.5+
PyPy3 5.8+
Versioning
This project’s versions follow the following pattern: MAJOR.MINOR.PATCH.
MAJOR version has been 0 so far
MINOR version is incremented on backward incompatible changes
PATCH version is incremented on backward compatible changes
Status
There are some people using this package. I don’t actively use it and as such any help I can offer with regard to any issues is very limited.
IPv6 support
IPv6 support is relatively new and currently limited, specifically:
InterfaceChoice.All is an alias for InterfaceChoice.Default on non-POSIX systems.
On Windows specific interfaces can only be requested as interface indexes, not as IP addresses.
Dual-stack IPv6 sockets are used, which may not be supported everywhere (some BSD variants do not have them).
Listening on localhost (::1) does not work. Help with understanding why is appreciated.
How to get python-zeroconf?
PyPI page https://pypi-hypernode.com/pypi/zeroconf
GitHub project https://github.com/jstasiak/python-zeroconf
The easiest way to install python-zeroconf is using pip:
pip install zeroconf
How do I use it?
Here’s an example of browsing for a service:
from zeroconf import ServiceBrowser, Zeroconf
class MyListener:
def remove_service(self, zeroconf, type, name):
print("Service %s removed" % (name,))
def add_service(self, zeroconf, type, name):
info = zeroconf.get_service_info(type, name)
print("Service %s added, service info: %s" % (name, info))
zeroconf = Zeroconf()
listener = MyListener()
browser = ServiceBrowser(zeroconf, "_http._tcp.local.", listener)
try:
input("Press enter to exit...\n\n")
finally:
zeroconf.close()If you don’t know the name of the service you need to browse for, try:
from zeroconf import ZeroconfServiceTypes
print('\n'.join(ZeroconfServiceTypes.find()))See examples directory for more.
Changelog
0.28.4
Improved cache reaper performance significantly, thanks to J. Nick Koston.
Added ServiceListener to __all__ as it’s part of the public API, thanks to Justin Nesselrotte.
0.28.3
Reduced a time an internal lock is held which should eliminate deadlocks in high-traffic networks, thanks to J. Nick Koston.
0.28.2
Stopped asking questions we already have answers for in cache, thanks to Paul Daumlechner.
Removed initial delay before querying for service info, thanks to Erik Montnemery.
0.28.1
Fixed a resource leak connected to using ServiceBrowser with multiple types, thanks to J. Nick Koston.
0.28.0
Improved Windows support when using socket errno checks, thanks to Sandy Patterson.
Added support for passing text addresses to ServiceInfo.
Improved logging (includes fixing an incorrect logging call)
Improved Windows compatibility by using Adapter.index from ifaddr, thanks to PhilippSelenium.
Improved Windows compatibility by stopping using socket.if_nameindex.
Fixed an OS X edge case which should also eliminate a memory leak, thanks to Emil Styrke.
Technically backwards incompatible:
ifaddr 0.1.7 or newer is required now.
0.27.1
Improved the logging situation (includes fixing a false-positive “packets() made no progress adding records”, thanks to Greg Badros)
0.27.0
Large multi-resource responses are now split into separate packets which fixes a bad mdns-repeater/ChromeCast Audio interaction ending with ChromeCast Audio crash (and possibly some others) and improves RFC 6762 compliance, thanks to Greg Badros
Added a warning presented when the listener passed to ServiceBrowser lacks update_service() callback
Added support for finding all services available in the browser example, thanks to Perry Kunder
Backwards incompatible:
Removed previously deprecated ServiceInfo address constructor parameter and property
0.26.3
Improved readability of logged incoming data, thanks to Erik Montnemery
Threads are given unique names now to aid debugging, thanks to Erik Montnemery
Fixed a regression where get_service_info() called within a listener add_service method would deadlock, timeout and incorrectly return None, fix thanks to Erik Montnemery, but Matt Saxon and Hmmbob were also involved in debugging it.
0.26.2
Added support for multiple types to ServiceBrowser, thanks to J. Nick Koston
Fixed a race condition where a listener gets a message before the lock is created, thanks to J. Nick Koston
0.26.1
Fixed a performance regression introduced in 0.26.0, thanks to J. Nick Koston (this is close in spirit to an optimization made in 0.24.5 by the same author)
0.26.0
Fixed a regression where service update listener wasn’t called on IP address change (it’s called on SRV/A/AAAA record changes now), thanks to Matt Saxon
Technically backwards incompatible:
Service update hook is no longer called on service addition (service added hook is still called), this is related to the fix above
0.25.1
Eliminated 5s hangup when calling Zeroconf.close(), thanks to Erik Montnemery
0.25.0
Reverted uniqueness assertions when browsing, they caused a regression
Backwards incompatible:
Rationalized handling of TXT records. Non-bytes values are converted to str and encoded to bytes using UTF-8 now, None values mean value-less attributes. When receiving TXT records no decoding is performed now, keys are always bytes and values are either bytes or None in value-less attributes.
0.24.5
Fixed issues with shared records being used where they shouldn’t be (TXT, SRV, A records are unique now), thanks to Matt Saxon
Stopped unnecessarily excluding host-only interfaces from InterfaceChoice.all as they don’t forbid multicast, thanks to Andreas Oberritter
Fixed repr() of IPv6 DNSAddress, thanks to Aldo Hoeben
Removed duplicate update messages sent to listeners, thanks to Matt Saxon
Added support for cooperating responders, thanks to Matt Saxon
Optimized handle_response cache check, thanks to J. Nick Koston
Fixed memory leak in DNSCache, thanks to J. Nick Koston
0.24.4
Fixed resetting TTL in DNSRecord.reset_ttl(), thanks to Matt Saxon
Improved various DNS class’ string representations, thanks to Jay Hogg
0.24.3
Fixed import-time “TypeError: ‘ellipsis’ object is not iterable.” on CPython 3.5.2
0.24.2
Added support for AWDL interface on macOS (needed and used by the opendrop project but should be useful in general), thanks to Milan Stute
Added missing type hints
0.24.1
Applied some significant performance optimizations, thanks to Jaime van Kessel for the patch and to Ghostkeeper for performance measurements
Fixed flushing outdated cache entries when incoming record is unique, thanks to Michael Hu
Fixed handling updates of TXT records (they’d not get recorded previously), thanks to Michael Hu
0.24.0
Added IPv6 support, thanks to Dmitry Tantsur
Added additional recommended records to PTR responses, thanks to Scott Mertz
Added handling of ENOTCONN being raised during shutdown when using Eventlet, thanks to Tamás Nepusz
Included the py.typed marker in the package so that type checkers know to use type hints from the source code, thanks to Dmitry Tantsur
0.23.0
Added support for MyListener call getting updates to service TXT records, thanks to Matt Saxon
Added support for multiple addresses when publishing a service, getting/setting single address has become deprecated. Change thanks to Dmitry Tantsur
Backwards incompatible:
Dropped Python 3.4 support
0.22.0
A lot of maintenance work (tooling, typing coverage and improvements, spelling) done, thanks to Ville Skyttä
Provided saner defaults in ServiceInfo’s constructor, thanks to Jorge Miranda
Fixed service removal packets not being sent on shutdown, thanks to Andrew Bonney
Added a way to define TTL-s through ServiceInfo contructor parameters, thanks to Andrew Bonney
Technically backwards incompatible:
Adjusted query intervals to match RFC 6762, thanks to Andrew Bonney
Made default TTL-s match RFC 6762, thanks to Andrew Bonney
0.21.3
This time really allowed incoming service names to contain underscores (patch released as part of 0.21.0 was defective)
0.21.2
Fixed import-time typing-related TypeError when older typing version is used
0.21.1
Fixed installation on Python 3.4 (we use typing now but there was no explicit dependency on it)
0.21.0
Added an error message when importing the package using unsupported Python version
Fixed TTL handling for published service
Implemented unicast support
Fixed WSL (Windows Subsystem for Linux) compatibility
Fixed occasional UnboundLocalError issue
Fixed UTF-8 multibyte name compression
Switched from netifaces to ifaddr (pure Python)
Allowed incoming service names to contain underscores
0.20.0
Dropped support for Python 2 (this includes PyPy) and 3.3
Fixed some class’ equality operators
ServiceBrowser entries are being refreshed when ‘stale’ now
Cache returns new records first now instead of last
0.19.1
Allowed installation with netifaces >= 0.10.6 (a bug that was concerning us got fixed)
0.19.0
Technically backwards incompatible - restricted netifaces dependency version to work around a bug, see https://github.com/jstasiak/python-zeroconf/issues/84 for details
0.18.0
Dropped Python 2.6 support
Improved error handling inside code executed when Zeroconf object is being closed
0.17.7
Better Handling of DNS Incoming Packets parsing exceptions
Many exceptions will now log a warning the first time they are seen
Catch and log sendto() errors
Fix/Implement duplicate name change
Fix overly strict name validation introduced in 0.17.6
Greatly improve handling of oversized packets including:
Implement name compression per RFC1035
Limit size of generated packets to 9000 bytes as per RFC6762
Better handle over sized incoming packets
Increased test coverage to 95%
0.17.6
Many improvements to address race conditions and exceptions during ZC() startup and shutdown, thanks to: morpav, veawor, justingiorgi, herczy, stephenrauch
Added more test coverage: strahlex, stephenrauch
Stephen Rauch contributed:
Speed up browser startup
Add ZeroconfServiceTypes() query class to discover all advertised service types
Add full validation for service names, types and subtypes
Fix for subtype browsing
Fix DNSHInfo support
0.17.5
Fixed OpenBSD compatibility, thanks to Alessio Sergi
Fixed race condition on ServiceBrowser startup, thanks to gbiddison
Fixed installation on some Python 3 systems, thanks to Per Sandström
Fixed “size change during iteration” bug on Python 3, thanks to gbiddison
0.17.4
Fixed support for Linux kernel versions < 3.9 (thanks to Giovanni Harting and Luckydonald, GitHub pull request #26)
0.17.3
Fixed DNSText repr on Python 3 (it’d crash when the text was longer than 10 bytes), thanks to Paulus Schoutsen for the patch, GitHub pull request #24
0.17.2
Fixed installation on Python 3.4.3+ (was failing because of enum34 dependency which fails to install on 3.4.3+, changed to depend on enum-compat instead; thanks to Michael Brennan for the original patch, GitHub pull request #22)
0.17.1
Fixed EADDRNOTAVAIL when attempting to use dummy network interfaces on Windows, thanks to daid
0.17.0
Added some Python dependencies so it’s not zero-dependencies anymore
Improved exception handling (it’ll be quieter now)
Messages are listened to and sent using all available network interfaces by default (configurable); thanks to Marcus Müller
Started using logging more freely
Fixed a bug with binary strings as property values being converted to False (https://github.com/jstasiak/python-zeroconf/pull/10); thanks to Dr. Seuss
Added new ServiceBrowser event handler interface (see the examples)
PyPy3 now officially supported
Fixed ServiceInfo repr on Python 3, thanks to Yordan Miladinov
0.16.0
Set up Python logging and started using it
Cleaned up code style (includes migrating from camel case to snake case)
0.15.1
Fixed handling closed socket (GitHub #4)
0.15
Forked by Jakub Stasiak
Made Python 3 compatible
Added setup script, made installable by pip and uploaded to PyPI
Set up Travis build
Reformatted the code and moved files around
Stopped catching BaseException in several places, that could hide errors
Marked threads as daemonic, they won’t keep application alive now
0.14
Fix for SOL_IP undefined on some systems - thanks Mike Erdely.
Cleaned up examples.
Lowercased module name.
0.13
Various minor changes; see git for details.
No longer compatible with Python 2.2. Only tested with 2.5-2.7.
Fork by William McBrine.
0.12
allow selection of binding interface
typo fix - Thanks A. M. Kuchlingi
removed all use of word ‘Rendezvous’ - this is an API change
0.11
correction to comments for addListener method
support for new record types seen from OS X - IPv6 address - hostinfo
ignore unknown DNS record types
fixes to name decoding
works alongside other processes using port 5353 (e.g. on Mac OS X)
tested against Mac OS X 10.3.2’s mDNSResponder
corrections to removal of list entries for service browser
0.10
Jonathon Paisley contributed these corrections:
always multicast replies, even when query is unicast
correct a pointer encoding problem
can now write records in any order
traceback shown on failure
better TXT record parsing
server is now separate from name
can cancel a service browser
modified some unit tests to accommodate these changes
0.09
remove all records on service unregistration
fix DOS security problem with readName
0.08
changed licensing to LGPL
0.07
faster shutdown on engine
pointer encoding of outgoing names
ServiceBrowser now works
new unit tests
0.06
small improvements with unit tests
added defined exception types
new style objects
fixed hostname/interface problem
fixed socket timeout problem
fixed add_service_listener() typo bug
using select() for socket reads
tested on Debian unstable with Python 2.2.2
0.05
ensure case insensitivty on domain names
support for unicast DNS queries
0.04
added some unit tests
added __ne__ adjuncts where required
ensure names end in ‘.local.’
timeout on receiving socket for clean shutdown
License
LGPL, see COPYING file for details.
Release history Release notifications | RSS feed
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
Source Distribution
Built Distribution
File details
Details for the file zeroconf-0.28.4.tar.gz.
File metadata
- Download URL: zeroconf-0.28.4.tar.gz
- Upload date:
- Size: 60.7 kB
- Tags: Source
- Uploaded using Trusted Publishing? No
- Uploaded via: Python-urllib/3.8
File hashes
| Algorithm | Hash digest | |
|---|---|---|
| SHA256 | ec489012835544481c9c669e6cd91ff7ebe5407cf5797a4cbc739be5d6bbce0c |
|
| MD5 | 0ebe1ab13a13ff76bd8b43dafa24e0bb |
|
| BLAKE2b-256 | c035439d7a42c8f9860be55585353d22ee4282c83b34604cb57230ce53ef3166 |
File details
Details for the file zeroconf-0.28.4-py3-none-any.whl.
File metadata
- Download URL: zeroconf-0.28.4-py3-none-any.whl
- Upload date:
- Size: 53.0 kB
- Tags: Python 3
- Uploaded using Trusted Publishing? No
- Uploaded via: Python-urllib/3.8
File hashes
| Algorithm | Hash digest | |
|---|---|---|
| SHA256 | 28b5590e32b6504a219d100a2007e7ba4d40804fd6802b238164ea3a664b29cb |
|
| MD5 | 0e90c02ad43fce09f6872728f91bbc9a |
|
| BLAKE2b-256 | 2489eef74f79161fe0ae755061960f6d576f94272bf47db8bb6bea48fadd68e0 |
