zeroconf 0.39.1

python-zeroconf

Documentation.

This is fork of pyzeroconf, Multicast DNS Service Discovery for Python, originally by Paul Scott-Murphy (https://github.com/paulsm/pyzeroconf), modified by William McBrine (https://github.com/wmcbrine/pyzeroconf).

The original William McBrine’s fork note:

This fork is used in all of my TiVo-related projects: HME for Python
(and therefore HME/VLC), Network Remote, Remote Proxy, and pyTivo.
Before this, I was tracking the changes for zeroconf.py in three
separate repos. I figured I should have an authoritative source.

Although I make changes based on my experience with TiVos, I expect that
they're generally applicable. This version also includes patches found
on the now-defunct (?) Launchpad repo of pyzeroconf, and elsewhere
around the net -- not always well-documented, sorry.

Compatible with:

• Bonjour

• Avahi

Compared to some other Zeroconf/Bonjour/Avahi Python packages, python-zeroconf:

• isn’t tied to Bonjour or Avahi

• doesn’t use D-Bus

• doesn’t force you to use particular event loop or Twisted (asyncio is used under the hood but not required)

• is pip-installable

• has PyPI distribution

How to get python-zeroconf?

• PyPI page https://pypi-hypernode.com/pypi/zeroconf

• GitHub project https://github.com/jstasiak/python-zeroconf

The easiest way to install python-zeroconf is using pip:

pip install zeroconf

How do I use it?

Here’s an example of browsing for a service:

from zeroconf import ServiceBrowser, ServiceListener, Zeroconf


class MyListener(ServiceListener):

    def update_service(self, zc: Zeroconf, type_: str, name: str) -> None:
        print(f"Service {name} updated")

    def remove_service(self, zc: Zeroconf, type_: str, name: str) -> None:
        print(f"Service {name} removed")

    def add_service(self, zc: Zeroconf, type_: str, name: str) -> None:
        info = zc.get_service_info(type_, name)
        print(f"Service {name} added, service info: {info}")


zeroconf = Zeroconf()
listener = MyListener()
browser = ServiceBrowser(zeroconf, "_http._tcp.local.", listener)
try:
    input("Press enter to exit...\n\n")
finally:
    zeroconf.close()

If you don’t know the name of the service you need to browse for, try:

from zeroconf import ZeroconfServiceTypes
print('\n'.join(ZeroconfServiceTypes.find()))

See examples directory for more.

Changelog

0.39.1

• Performance improvements for constructing outgoing packet data (#1090) @bdraco

0.39.0

Technically backwards incompatible:

• Switch to using async_timeout for timeouts (#1081) @bdraco

  Significantly reduces the number of asyncio tasks that are created when using ServiceInfo or AsyncServiceInfo

0.38.7

• Performance improvements for parsing incoming packet data (#1076) @bdraco

0.38.6

• Performance improvements for fetching ServiceInfo (#1068) @bdraco

0.38.5

• Fix ServiceBrowsers not getting ServiceStateChange.Removed callbacks on PTR record expire (#1064) @bdraco

  ServiceBrowsers were only getting a ServiceStateChange.Removed callback when the record was sent with a TTL of 0. ServiceBrowsers now correctly get a ServiceStateChange.Removed callback when the record expires as well.

• Fix missing minimum version of python 3.7 (#1060) @stevencrader

0.38.4

• Fix IP Address updates when hostname is uppercase (#1057) @bdraco

  ServiceBrowsers would not callback updates when the ip address changed if the hostname contained uppercase characters

0.38.3

Version bump only, no changes from 0.38.2

0.38.2

• Make decode errors more helpful in finding the source of the bad data (#1052) @bdraco

0.38.1

• Improve performance of query scheduler (#1043) @bdraco

• Avoid linear type searches in ServiceBrowsers (#1044) @bdraco

0.38.0

• Handle Service types that end with another service type (#1041) @apworks1

Backwards incompatible:

• Dropped Python 3.6 support (#1009) @bdraco

0.37.0

Technically backwards incompatible:

• Adding a listener that does not inherit from RecordUpdateListener now logs an error (#1034) @bdraco

• The NotRunningException exception is now thrown when Zeroconf is not running (#1033) @bdraco

  Before this change the consumer would get a timeout or an EventLoopBlocked exception when calling ServiceInfo.*request when the instance had already been shutdown or had failed to startup.

• The EventLoopBlocked exception is now thrown when a coroutine times out (#1032) @bdraco

  Previously concurrent.futures.TimeoutError would have been raised instead. This is never expected to happen during normal operation.

0.36.13

• Unavailable interfaces are now skipped during socket bind (#1028) @bdraco

• Downgraded incoming corrupt packet logging to debug (#1029) @bdraco

  Warning about network traffic we have no control over is confusing to users as they think there is something wrong with zeroconf

0.36.12

• Prevented service lookups from deadlocking if time abruptly moves backwards (#1006) @bdraco

  The typical reason time moves backwards is via an ntp update

0.36.11

No functional changes from 0.36.10. This release corrects an error in the README.rst file that prevented the build from uploading to PyPI

0.36.10

• scope_id is now stripped from IPv6 addresses if given (#1020) @StevenLooman

  cpython 3.9 allows a suffix %scope_id in IPv6Address. This caused an error with the existing code if it was not stripped

• Optimized decoding labels from incoming packets (#1019) @bdraco

0.36.9

• Ensure ServiceInfo orders newest addresses first (#1012) @bdraco

  This change effectively restored the behavior before 1s cache flush expire behavior described in rfc6762 section 10.2 was added for callers that rely on this.

0.36.8

• Fixed ServiceBrowser infinite loop when zeroconf is closed before it is canceled (#1008) @bdraco

0.36.7

• Improved performance of responding to queries (#994) (#996) (#997) @bdraco

• Improved log message when receiving an invalid or corrupt packet (#998) @bdraco

0.36.6

• Improved performance of sending outgoing packets (#990) @bdraco

0.36.5

• Reduced memory usage for incoming and outgoing packets (#987) @bdraco

0.36.4

• Improved performance of constructing outgoing packets (#978) (#979) @bdraco

• Deferred parsing of incoming packets when it can be avoided (#983) @bdraco

0.36.3

• Improved performance of parsing incoming packets (#975) @bdraco

0.36.2

• Include NSEC records for non-existent types when responding with addresses (#972) (#971) @bdraco Implements RFC6762 sec 6.2 (http://datatracker.ietf.org/doc/html/rfc6762#section-6.2)

0.36.1

• Skip goodbye packets for addresses when there is another service registered with the same name (#968) @bdraco

  If a ServiceInfo that used the same server name as another ServiceInfo was unregistered, goodbye packets would be sent for the addresses and would cause the other service to be seen as offline.

• Fixed equality and hash for dns records with the unique bit (#969) @bdraco

  These records should have the same hash and equality since the unique bit (cache flush bit) is not considered when adding or removing the records from the cache.

0.36.0

Technically backwards incompatible:

• Fill incomplete IPv6 tuples to avoid WinError on windows (#965) @lokesh2019

  Fixed #932

0.35.1

• Only reschedule types if the send next time changes (#958) @bdraco

  When the PTR response was seen again, the timer was being canceled and rescheduled even if the timer was for the same time. While this did not cause any breakage, it is quite inefficient.

• Cache DNS record and question hashes (#960) @bdraco

  The hash was being recalculated every time the object was being used in a set or dict. Since the hashes are effectively immutable, we only calculate them once now.

0.35.0

• Reduced chance of accidental synchronization of ServiceInfo requests (#955) @bdraco

• Sort aggregated responses to increase chance of name compression (#954) @bdraco

Technically backwards incompatible:

• Send unicast replies on the same socket the query was received (#952) @bdraco

  When replying to a QU question, we do not know if the sending host is reachable from all of the sending sockets. We now avoid this problem by replying via the receiving socket. This was the existing behavior when InterfaceChoice.Default is set.

  This change extends the unicast relay behavior to used with InterfaceChoice.Default to apply when InterfaceChoice.All or interfaces are explicitly passed when instantiating a Zeroconf instance.

  Fixes #951

0.34.3

• Fix sending immediate multicast responses (#949) @bdraco

0.34.2

• Coalesce aggregated multicast answers (#945) @bdraco

  When the random delay is shorter than the last scheduled response, answers are now added to the same outgoing time group.

  This reduces traffic when we already know we will be sending a group of answers inside the random delay window described in datatracker.ietf.org/doc/html/rfc6762#section-6.3

• Ensure ServiceInfo requests can be answered inside the default timeout with network protection (#946) @bdraco

  Adjust the time windows to ensure responses that have triggered the protection against against excessive packet flooding due to software bugs or malicious attack described in RFC6762 section 6 can respond in under 1350ms to ensure ServiceInfo can ask two questions within the default timeout of 3000ms

0.34.1

• Ensure multicast aggregation sends responses within 620ms (#942) @bdraco

  Responses that trigger the protection against against excessive packet flooding due to software bugs or malicious attack described in RFC6762 section 6 could cause the multicast aggregation response to be delayed longer than 620ms (The maximum random delay of 120ms and 500ms additional for aggregation).

  Only responses that trigger the protection are delayed longer than 620ms

0.34.0

• Implemented Multicast Response Aggregation (#940) @bdraco

  Responses are now aggregated when possible per rules in RFC6762 section 6.4

  Responses that trigger the protection against against excessive packet flooding due to software bugs or malicious attack described in RFC6762 section 6 are delayed instead of discarding as it was causing responders that implement Passive Observation Of Failures (POOF) to evict the records.

  Probe responses are now always sent immediately as there were cases where they would fail to be answered in time to defend a name.

0.33.4

• Ensure zeroconf can be loaded when the system disables IPv6 (#933) @che0

0.33.3

• Added support for forward dns compression pointers (#934) @bdraco

• Provide sockname when logging a protocol error (#935) @bdraco

0.33.2

• Handle duplicate goodbye answers in the same packet (#928) @bdraco

  Solves an exception being thrown when we tried to remove the known answer from the cache when the second goodbye answer in the same packet was processed

  Fixed #926

• Skip ipv6 interfaces that return ENODEV (#930) @bdraco

0.33.1

• Version number change only with less restrictive directory permissions

  Fixed #923

0.33.0

This release eliminates all threading locks as all non-threadsafe operations now happen in the event loop.

• Let connection_lost close the underlying socket (#918) @bdraco

  The socket was closed during shutdown before asyncio’s connection_lost handler had a chance to close it which resulted in a traceback on windows.

  Fixed #917

Technically backwards incompatible:

• Removed duplicate unregister_all_services code (#910) @bdraco

  Calling Zeroconf.close from same asyncio event loop zeroconf is running in will now skip unregister_all_services and log a warning as this a blocking operation and is not async safe and never has been.

  Use AsyncZeroconf instead, or for legacy code call async_unregister_all_services before Zeroconf.close

0.32.1

• Increased timeout in ServiceInfo.request to handle loaded systems (#895) @bdraco

  It can take a few seconds for a loaded system to run the async_request coroutine when the event loop is busy, or the system is CPU bound (example being Home Assistant startup). We now add an additional _LOADED_SYSTEM_TIMEOUT (10s) to the run_coroutine_threadsafe calls to ensure the coroutine has the total amount of time to run up to its internal timeout (default of 3000ms).

  Ten seconds is a bit large of a timeout; however, it is only used in cases where we wrap other timeouts. We now expect the only instance the run_coroutine_threadsafe result timeout will happen in a production circumstance is when someone is running a ServiceInfo.request() in a thread and another thread calls Zeroconf.close() at just the right moment that the future is never completed unless the system is so loaded that it is nearly unresponsive.

  The timeout for run_coroutine_threadsafe is the maximum time a thread can cleanly shut down when zeroconf is closed out in another thread, which should always be longer than the underlying thread operation.

0.32.0

This release offers 100% line and branch coverage.

• Made ServiceInfo first question QU (#852) @bdraco

  We want an immediate response when requesting with ServiceInfo by asking a QU question; most responders will not delay the response and respond right away to our question. This also improves compatibility with split networks as we may not have been able to see the response otherwise. If the responder has not multicast the record recently, it may still choose to do so in addition to responding via unicast

  Reduces traffic when there are multiple zeroconf instances running on the network running ServiceBrowsers

  If we don’t get an answer on the first try, we ask a QM question in the event, we can’t receive a unicast response for some reason

  This change puts ServiceInfo inline with ServiceBrowser which also asks the first question as QU since ServiceInfo is commonly called from ServiceBrowser callbacks

• Limited duplicate packet suppression to 1s intervals (#841) @bdraco

  Only suppress duplicate packets that happen within the same second. Legitimate queriers will retry the question if they are suppressed. The limit was reduced to one second to be in line with rfc6762

• Made multipacket known answer suppression per interface (#836) @bdraco

  The suppression was happening per instance of Zeroconf instead of per interface. Since the same network can be seen on multiple interfaces (usually and wifi and ethernet), this would confuse the multi-packet known answer supression since it was not expecting to get the same data more than once

• New ServiceBrowsers now request QU in the first outgoing when unspecified (#812) @bdraco

  https://datatracker.ietf.org/doc/html/rfc6762#section-5.4 When we start a ServiceBrowser and zeroconf has just started up, the known answer list will be small. By asking a QU question first, it is likely that we have a large known answer list by the time we ask the QM question a second later (current default which is likely too low but would be a breaking change to increase). This reduces the amount of traffic on the network, and has the secondary advantage that most responders will answer a QU question without the typical delay answering QM questions.

• IPv6 link-local addresses are now qualified with scope_id (#343) @ibygrave

  When a service is advertised on an IPv6 address where the scope is link local, i.e. fe80::/64 (see RFC 4007) the resolved IPv6 address must be extended with the scope_id that identifies through the “%” symbol the local interface to be used when routing to that address. A new API parsed_scoped_addresses() is provided to return qualified addresses to avoid breaking compatibility on the existing parsed_addresses().

• Network adapters that are disconnected are now skipped (#327) @ZLJasonG

• Fixed listeners missing initial packets if Engine starts too quickly (#387) @bdraco

  When manually creating a zeroconf.Engine object, it is no longer started automatically. It must manually be started by calling .start() on the created object.

  The Engine thread is now started after all the listeners have been added to avoid a race condition where packets could be missed at startup.

• Fixed answering matching PTR queries with the ANY query (#618) @bdraco

• Fixed lookup of uppercase names in the registry (#597) @bdraco

  If the ServiceInfo was registered with an uppercase name and the query was for a lowercase name, it would not be found and vice-versa.

• Fixed unicast responses from any source port (#598) @bdraco

  Unicast responses were only being sent if the source port was 53, this prevented responses when testing with dig:

  dig -p 5353 @224.0.0.251 media-12.local

  The above query will now see a response

• Fixed queries for AAAA records not being answered (#616) @bdraco

• Removed second level caching from ServiceBrowsers (#737) @bdraco

  The ServiceBrowser had its own cache of the last time it saw a service that was reimplementing the DNSCache and presenting a source of truth problem that lead to unexpected queries when the two disagreed.

• Fixed server cache not being case-insensitive (#731) @bdraco

  If the server name had uppercase chars and any of the matching records were lowercase, and the server would not be found

• Fixed cache handling of records with different TTLs (#729) @bdraco

  There should only be one unique record in the cache at a time as having multiple unique records will different TTLs in the cache can result in unexpected behavior since some functions returned all matching records and some fetched from the right side of the list to return the newest record. Instead we now store the records in a dict to ensure that the newest record always replaces the same unique record, and we never have a source of truth problem determining the TTL of a record from the cache.

• Fixed ServiceInfo with multiple A records (#725) @bdraco

  If there were multiple A records for the host, ServiceInfo would always return the last one that was in the incoming packet, which was usually not the one that was wanted.

• Fixed stale unique records expiring too quickly (#706) @bdraco

  Records now expire 1s in the future instead of instant removal.

  tools.ietf.org/html/rfc6762#section-10.2 Queriers receiving a Multicast DNS response with a TTL of zero SHOULD NOT immediately delete the record from the cache, but instead record a TTL of 1 and then delete the record one second later. In the case of multiple Multicast DNS responders on the network described in Section 6.6 above, if one of the responders shuts down and incorrectly sends goodbye packets for its records, it gives the other cooperating responders one second to send out their own response to “rescue” the records before they expire and are deleted.

• Fixed exception when unregistering a service multiple times (#679) @bdraco

• Added an AsyncZeroconfServiceTypes to mirror ZeroconfServiceTypes to zeroconf.asyncio (#658) @bdraco

• Fixed interface_index_to_ip6_address not skiping ipv4 adapters (#651) @bdraco

• Added async_unregister_all_services to AsyncZeroconf (#649) @bdraco

• Fixed services not being removed from the registry when calling unregister_all_services (#644) @bdraco

  There was a race condition where a query could be answered for a service in the registry, while goodbye packets which could result in a fresh record being broadcast after the goodbye if a query came in at just the right time. To avoid this, we now remove the services from the registry right after we generate the goodbye packet

• Fixed zeroconf exception on load when the system disables IPv6 (#624) @bdraco

• Fixed the QU bit missing from for probe queries (#609) @bdraco

  The bit should be set per datatracker.ietf.org/doc/html/rfc6762#section-8.1

• Fixed the TC bit missing for query packets where the known answers span multiple packets (#494) @bdraco

• Fixed packets not being properly separated when exceeding maximum size (#498) @bdraco

  Ensure that questions that exceed the max packet size are moved to the next packet. This fixes DNSQuestions being sent in multiple packets in violation of: datatracker.ietf.org/doc/html/rfc6762#section-7.2

  Ensure only one resource record is sent when a record exceeds _MAX_MSG_TYPICAL datatracker.ietf.org/doc/html/rfc6762#section-17

• Fixed PTR questions asked in uppercase not being answered (#465) @bdraco

• Added Support for context managers in Zeroconf and AsyncZeroconf (#284) @shenek

• Implemented an AsyncServiceBrowser to compliment the sync ServiceBrowser (#429) @bdraco

• Added async_get_service_info to AsyncZeroconf and async_request to AsyncServiceInfo (#408) @bdraco

• Implemented allowing passing in a sync Zeroconf instance to AsyncZeroconf (#406) @bdraco

• Fixed IPv6 setup under MacOS when binding to “” (#392) @bdraco

• Fixed ZeroconfServiceTypes.find not always cancels the ServiceBrowser (#389) @bdraco

  There was a short window where the ServiceBrowser thread could be left running after Zeroconf is closed because the .join() was never waited for when a new Zeroconf object was created

• Fixed duplicate packets triggering duplicate updates (#376) @bdraco

  If TXT or SRV records update was already processed and then received again, it was possible for a second update to be called back in the ServiceBrowser

• Fixed ServiceStateChange.Updated event happening for IPs that already existed (#375) @bdraco

• Fixed RFC6762 Section 10.2 paragraph 2 compliance (#374) @bdraco

• Reduced length of ServiceBrowser thread name with many types (#373) @bdraco

• Fixed empty answers being added in ServiceInfo.request (#367) @bdraco

• Fixed ServiceInfo not populating all AAAA records (#366) @bdraco

  Use get_all_by_details to ensure all records are loaded into addresses.

  Only load A/AAAA records from the cache once in load_from_cache if there is a SRV record present

  Move duplicate code that checked if the ServiceInfo was complete into its own function

• Fixed a case where the cache list can change during iteration (#363) @bdraco

• Return task objects created by AsyncZeroconf (#360) @nocarryr

Traffic Reduction:

• Added support for handling QU questions (#621) @bdraco

  Implements RFC 6762 sec 5.4: Questions Requesting Unicast Responses datatracker.ietf.org/doc/html/rfc6762#section-5.4

• Implemented protect the network against excessive packet flooding (#619) @bdraco

• Additionals are now suppressed when they are already in the answers section (#617) @bdraco

• Additionals are no longer included when the answer is suppressed by known-answer suppression (#614) @bdraco

• Implemented multi-packet known answer supression (#687) @bdraco

  Implements datatracker.ietf.org/doc/html/rfc6762#section-7.2

• Implemented efficient bucketing of queries with known answers (#698) @bdraco

• Implemented duplicate question suppression (#770) @bdraco

  http://datatracker.ietf.org/doc/html/rfc6762#section-7.3

Technically backwards incompatible:

• Update internal version check to match docs (3.6+) (#491) @bdraco

  Python version earlier then 3.6 were likely broken with zeroconf already, however, the version is now explicitly checked.

• Update python compatibility as PyPy3 7.2 is required (#523) @bdraco

Backwards incompatible:

• Drop oversize packets before processing them (#826) @bdraco

  Oversized packets can quickly overwhelm the system and deny service to legitimate queriers. In practice, this is usually due to broken mDNS implementations rather than malicious actors.

• Guard against excessive ServiceBrowser queries from PTR records significantly lowerthan recommended (#824) @bdraco

  We now enforce a minimum TTL for PTR records to avoid ServiceBrowsers generating excessive queries refresh queries. Apple uses a 15s minimum TTL, however, we do not have the same level of rate limit and safeguards, so we use 1/4 of the recommended value.

• RecordUpdateListener now uses async_update_records instead of update_record (#419, #726) @bdraco

  This allows the listener to receive all the records that have been updated in a single transaction such as a packet or cache expiry.

  update_record has been deprecated in favor of async_update_records A compatibility shim exists to ensure classes that use RecordUpdateListener as a base class continue to have update_record called, however, they should be updated as soon as possible.

  A new method async_update_records_complete is now called on each listener when all listeners have completed processing updates and the cache has been updated. This allows ServiceBrowsers to delay calling handlers until they are sure the cache has been updated as its a common pattern to call for ServiceInfo when a ServiceBrowser handler fires.

  The async_ prefix was chosen to make it clear that these functions run in the eventloop and should never do blocking I/O. Before 0.32+ these functions ran in a select() loop and should not have been doing any blocking I/O, but it was not clear to implementors that I/O would block the loop.

• Pass both the new and old records to async_update_records (#792) @bdraco

  Pass the old_record (cached) as the value and the new_record (wire) to async_update_records instead of forcing each consumer to check the cache since we will always have the old_record when generating the async_update_records call. This avoids the overhead of multiple cache lookups for each listener.

0.31.0

• Separated cache loading from I/O in ServiceInfo and fixed cache lookup (#356), thanks to J. Nick Koston.

  The ServiceInfo class gained a load_from_cache() method to only fetch information from Zeroconf cache (if it exists) with no IO performed. Additionally this should reduce IO in cases where cache lookups were previously incorrectly failing.

0.30.0

• Some nice refactoring work including removal of the Reaper thread, thanks to J. Nick Koston.

• Fixed a Windows-specific The requested address is not valid in its context regression, thanks to Timothee ‘TTimo’ Besset and J. Nick Koston.

• Provided an asyncio-compatible service registration layer (in the zeroconf.asyncio module), thanks to J. Nick Koston.

0.29.0

• A single socket is used for listening on responding when InterfaceChoice.Default is chosen. Thanks to J. Nick Koston.

Backwards incompatible:

• Dropped Python 3.5 support

0.28.8

• Fixed the packet generation when multiple packets are necessary, previously invalid packets were generated sometimes. Patch thanks to J. Nick Koston.

0.28.7

• Fixed the IPv6 address rendering in the browser example, thanks to Alexey Vazhnov.

• Fixed a crash happening when a service is added or removed during handle_response and improved exception handling, thanks to J. Nick Koston.

0.28.6

• Loosened service name validation when receiving from the network this lets us handle some real world devices previously causing errors, thanks to J. Nick Koston.

0.28.5

• Enabled ignoring duplicated messages which decreases CPU usage, thanks to J. Nick Koston.

• Fixed spurious AttributeError: module ‘unittest’ has no attribute ‘mock’ in tests.

0.28.4

• Improved cache reaper performance significantly, thanks to J. Nick Koston.

• Added ServiceListener to __all__ as it’s part of the public API, thanks to Justin Nesselrotte.

0.28.3

• Reduced a time an internal lock is held which should eliminate deadlocks in high-traffic networks, thanks to J. Nick Koston.

0.28.2

• Stopped asking questions we already have answers for in cache, thanks to Paul Daumlechner.

• Removed initial delay before querying for service info, thanks to Erik Montnemery.

0.28.1

• Fixed a resource leak connected to using ServiceBrowser with multiple types, thanks to J. Nick Koston.

0.28.0

• Improved Windows support when using socket errno checks, thanks to Sandy Patterson.

• Added support for passing text addresses to ServiceInfo.

• Improved logging (includes fixing an incorrect logging call)

• Improved Windows compatibility by using Adapter.index from ifaddr, thanks to PhilippSelenium.

• Improved Windows compatibility by stopping using socket.if_nameindex.

• Fixed an OS X edge case which should also eliminate a memory leak, thanks to Emil Styrke.

Technically backwards incompatible:

• ifaddr 0.1.7 or newer is required now.

License

LGPL, see COPYING file for details.