Library implementing a ZigBee stack
Project description
zigpy
zigpy is Zigbee protocol stack integration project to implement the Zigbee Home Automation standard as a Python 3 library.
Zigbee Home Automation integration with zigpy allows you to connect one of many off-the-shelf Zigbee adapters using one of the available Zigbee radio library modules compatible with zigpy to control Zigbee based devices. There is currently support for controlling Zigbee device types such as binary sensors (e.g., motion and door sensors), sensors (e.g., temperature sensors), lightbulbs, switches, and fans.
Zigbee coordinator hardware from many different hardware manufacurer are support via radio libraries which translate their propriatory communication protocol into a common API which is shared among all radio libraries for zigpy. If some Zigbee coordinator hardware for other manufacurers is not supported yet by zigpy it is possible for any independent developer to step-up and develop a new radio library for zigpy which translates its propriatory communication protocol into the common API that zigpy can understand.
zigpy contains common code implementing Zigbee ZCL, ZDO and application state management which is being used by various radio libraries implementing the actual interface with the radio modules from different manufacturers. The separate radio libraries interface with radio hardware adapters/modules over USB and GPIO using different native UART serial protocols.
Reference implementation of the zigpy library exist in Home Assistant (Python based open source home automation software) as part of its ZHA integration component.
How to install and test, report bugs, or contribute to this project
For specific instructions on how-to install and test zigpy or contribute bug-reports and code to this project please see the guidelines in the CONTRIBUTING.md file:
This CONTRIBUTING.md file will contain information about using zigpy, testiing new releases, troubleshooting and bug-reporting as, as well as librar + code instructions for developers and more.
You can contribute to this project either as an end-user, a tester (advanced user contributing constructive issue/bug-reports) or as a developer contributing code.
Compatible Zigbee coordinator hardware
Radio libraries for zigpy are separate projects with their own repositories and these include bellows (for communicating with Silicon Labs EmberZNet based radios), zigpy-deconz (for communicating with deCONZ based radios from Dresden Elektronik), and zigpy-xbee (for communicating with XBee based Zigbee radios), zigpy-znp and zigpy-cc for communicating with newer and older Texas Instruments based radios that have Z-Stack 3.x.x or Z-Stack Home 1.2.x ZNP coordinator firmware respectivly, and zigpy-zigate for communicating with ZiGate based radios.
Note! Zigbee 3.0 support or not in zigpy depends primarly on your Zigbee coordinator hardware and its firmware. Some Zigbee coordinator hardware support Zigbee 3.0 but might be shipped with an older firmware which do not, in which case may want to upgrade the firmware manually yourself. Some other Zigbee coordinator hardware may not support a firmware that is capable of Zigbee 3.0 at all but can still be fully functional and feature complete for your needs, (this is very common as many if not most Zigbee devices do not yet Zigbee 3.0 or are backwards-compable with a Zigbee profile that is support by your Zigbee coordinator hardware and its firmware). As a general rule, newer Zigbee coordinator hardware released can normally support Zigbee 3.0 firmware and it is up to its manufacturer make such firmware available for them.
Known working Zigbee radio modules
- Silicon Labs EmberZNet based radios using the EZSP protocol (via the bellows library for zigpy)
- ITEAD Sonoff ZBBridge WiFi-bridge (Note! This first have to be flashed with Tasmota firmware and EmberZNet firmware)
- Elelabs Zigbee USB Adapter
- Elelabs Zigbee Raspberry Pi Shield
- Nortek GoControl QuickStick Combo Model HUSBZB-1 (Z-Wave & Zigbee USB Adapter)
- Telegesis ETRX357USB (Note! First have to be flashed with other EmberZNet NCP firmware)
- Telegesis ETRX357USB-LRS (Note! First have to be flashed with other EmberZNet NCP firmware)
- Telegesis ETRX357USB-LRS+8M (Note! First have to be flashed with other EmberZNet NCP firmware)
- deCONZ based radios (via the zigpy-deconz library for zigpy)
- ConBee II (a.k.a. ConBee 2) USB adapter from dresden dlektronik
- RaspBee II (a.k.a. RaspBee 2) GPIO radio adapter from dresden elektronik
- ConBee USB radio adapter from dresden elektronik
- RaspBee GPIO radio adapter from dresden elektronik
- XBee Zigbee based radios (via the zigpy-xbee library for zigpy)
- Digi XBee Series 3 (xbee3-24) modules
- Digi XBee Series 2C (S2C) modules
- Digi XBee Series 2 (S2) modules (Note! First have to be flashed with XBee Zigbee Coordinator API firmware via XCTU)
Experimental support for additional Zigbee radio modules
- Texas Instruments based radios with Z-Stack 3.x.x firmware (via the zigpy-znp library for zigpy)
- Texas Instruments with Z-Stack Home 1.2.x firmware (via the zigpy-cc library for zigpy)
- ZiGate open source ZigBee adapter hardware (via the zigpy-zigate library for zigpy)
- ZiGate USB-TTL (Note! Requires ZiGate firmware 3.1a or later)
- ZiGate USB-DIN (Note! Requires ZiGate firmware 3.1a or later)
- PiZiGate (ZiGate module for Raspberry Pi GPIO) (Note! Requires ZiGate firmware 3.1a or later)
- ZiGate Pack WiFi (Note! Requires ZiGate firmware 3.1a or later)
Release packages available via PyPI
New packages of tagged versions are also released via the "zigpy" project on PyPI
Older packages of tagged versions are still available on the "zigpy-homeassistant" project on PyPI
Packages of tagged versions of the radio libraries are released via separate projects on PyPI
Related projects
ZHA Device Handlers
ZHA deviation handling in Home Assistant relies on the third-party ZHA Device Handlers project. Zigbee devices that deviate from or do not fully conform to the standard specifications set by the Zigbee Alliance may require the development of custom ZHA Device Handlers (ZHA custom quirks handler implementation) to for all their functions to work properly with the ZHA component in Home Assistant. These ZHA Device Handlers for Home Assistant can thus be used to parse custom messages to and from non-compliant Zigbee devices. The custom quirks implementations for zigpy implemented as ZHA Device Handlers for Home Assistant are a similar concept to that of Hub-connected Device Handlers for the SmartThings platform as well as that of zigbee-herdsman converters as used by Zigbee2mqtt, meaning they are each virtual representations of a physical device that expose additional functionality that is not provided out-of-the-box by the existing integration between these platforms.
ZHA integration component for Home Assistant
ZHA integration component for Home Assistant is a reference implementation of the zigpy library as integrated into the core of Home Assistant (a Python based open source home automation software). There are also other GUI and non-GUI projects for Home Assistant's ZHA components which builds on or depends on its features and functions to enhance or improve its user-experience, some of those are listed and linked below.
ZHA Custom Radios
zha-custom-radios adds support for custom radio modules for zigpy to [Home Assistant's ZHA (Zigbee Home Automation) integration component]. This custom component for Home Assistant allows users to test out new modules for zigpy in Home Assistant's ZHA integration component before they are integrated into zigpy ZHA and also helps developers new zigpy radio modules without having to modify the Home Assistant's source code.
ZHA Custom
zha_custom is a custom component package for Home Assistant (with its ZHA component for zigpy integration) that acts as zigpy commands service wrapper, when installed it allows you to enter custom commands via to zigy to example change advanced configuration and settings that are not available in the UI.
ZHA Map
zha-map for Home Assistant's ZHA component can build a Zigbee network topology map.
ZHA Network Visualization Card
zha-network-visualization-card is a custom Lovelace element for Home Assistant which visualize the Zigbee network for the ZHA component.
ZHA Network Card
zha-network-card is a custom Lovelace card for Home Assistant that displays ZHA component Zigbee network and device information in Home Assistant
ZHA Device Exporter
zha-device-exporter is a custom component for Home Assistant to allow the ZHA component to export lists of Zigbee devices.
ZHA Custom Radios
zha-custom-radios A now obsolete custom component package for Home Assistant (with its ZHA component for zigpy integration) that allows users to test out new zigpy radio libraries and hardware modules before they have officially been integrated into ZHA. This enables developers and testers to test new or updated zigpy radio modules without having to modify the Home Assistant source code.
Zigpy Deconz Parser
zigpy-deconz-parser allow you to parse Home Assistant's ZHA component debug log using zigpy-deconz library if you are using a deCONZ based adapter like ConBee or RaspBee.
Release history Release notifications | RSS feed
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
Source Distribution
Built Distribution
File details
Details for the file zigpy-0.24.1.tar.gz.
File metadata
- Download URL: zigpy-0.24.1.tar.gz
- Upload date:
- Size: 130.3 kB
- Tags: Source
- Uploaded using Trusted Publishing? No
- Uploaded via: twine/3.2.0 pkginfo/1.5.0.1 requests/2.24.0 setuptools/50.3.0 requests-toolbelt/0.9.1 tqdm/4.49.0 CPython/3.8.5
File hashes
| Algorithm | Hash digest | |
|---|---|---|
| SHA256 | 19be9a1973835d5e42e120ef3b2657a6c4f460b94387339242e455e3f019b9c3 |
|
| MD5 | b30de5423380d5ef04969df8048ef6bf |
|
| BLAKE2b-256 | 3c1161c70223bb8ad1f02c4a898fae8cf57a8eca2766134a26e80ad6da46ea05 |
Provenance
File details
Details for the file zigpy-0.24.1-py3-none-any.whl.
File metadata
- Download URL: zigpy-0.24.1-py3-none-any.whl
- Upload date:
- Size: 162.8 kB
- Tags: Python 3
- Uploaded using Trusted Publishing? No
- Uploaded via: twine/3.2.0 pkginfo/1.5.0.1 requests/2.24.0 setuptools/50.3.0 requests-toolbelt/0.9.1 tqdm/4.49.0 CPython/3.8.5
File hashes
| Algorithm | Hash digest | |
|---|---|---|
| SHA256 | 47b66a1180336851a7047b8bb2f346beab188dc6a136e238caf6ef7e450c036d |
|
| MD5 | 2794f48873675ffa8bce7f7790db5466 |
|
| BLAKE2b-256 | 517c3ae13ad303f92a7648d7afadaf97f0d7b7cd3465b7f56cdb56bf6b0196cd |
